Journal of Materials Chemistry C

Papers
(The median citation count of Journal of Materials Chemistry C is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-03-01 to 2025-03-01.)
ArticleCitations
Luminescent lanthanide complexes supported by ditopic Schiff-base/calix[4]arene macrocycles: synthesis, structure, and luminescence properties of [Ln2(H2L2)(H2O)2165
Effects of Bi and Sb ion incorporation on the optoelectronic properties of mixed lead–tin perovskites154
2024 Journal of Materials Chemistry Lectureship winner: Raphaële Clément, University of California, Santa Barbara, United States135
Novel plasmonic–photonic Janus films with aluminum nanoisland-coated colloidal arrays for versatile applications134
Improving the efficiency of all-polymer solar cells through morphology control via a combination approach: polar solvent additives and external electric field110
Back cover102
Magnetocaloric effects in the quasi-1D chain carbonate NaDy(CO3)F2 through crystallographic directional rotation90
Non-hydrostatic pressure induced α to β phase transition in group IV–VI monochalcogenide GeSe88
Boosting photoelectricity based on self-supported flexible metal–organic framework arrays for photo-Fenton-like degradation of organic pollutants86
Recyclable chloride trapping and sustained nicotinate release monitored by photoluminescence of Eu3+-doped layered yttrium hydroxide85
Front cover82
Deep Learning Accelerated High-throughput Screening of Organic Solar Cells79
Doubling the efficiency of solution-processed blue phosphorescent organic light-emitting diodes via modified PEDOT : PSS hole-injection layers78
Recent progress in spiro-type hole transport materials for efficient and stable perovskite solar cells73
Flexible OLEDs with graphene electrodes on renewable cellulose platforms72
Homotypic heterojunction of metal oxygen/sulfide as an electron transport layer for high-performance perovskite solar cells71
Machine-learning guided discovery of ultralow-threshold organic gain materials towards electrically pumped lasing70
Crystal structure engineering of Prussian blue through a double-acting chelating agent for energy storage devices70
Flexible Cu(In,Ga)Se2 photovoltaics for bending applications: advances from materials to panels69
Back cover69
Back cover66
Inside front cover66
Inside back cover64
Contents list64
Contents list63
Inside front cover63
Front cover63
Contents list62
Back cover62
Front cover62
Inside front cover62
Inside front cover61
Inside front cover59
Contents list59
Editor's choice collection on luminescent metal halides: here come halide perovskites and their derivatives59
Back cover59
Contents list57
Inside front cover57
Contents list56
Inside back cover56
Back cover55
Front cover55
Back cover55
Contents list54
Back cover54
Contents list53
Inside front cover53
Contents list52
2023 Journal of Materials Chemistry Lectureship winner: Dr Jovana Milić, University of Fribourg, Switzerland51
Front cover51
Contents list50
Sandwich-type phase-change composites with the dual-function of efficient heat management and temperature-regulated electromagnetic interference shielding performance50
Front cover50
Sensitizing phosphorescent and radical emitters via triplet energy translation from CsPbBr3 nanocrystals49
A circularly polarized (CP) white organic light-emitting diode (WOLED) based on a chiral organo-Sm3+complex49
Resistive switching memory from dielectric lignin for sustainable electronics48
Multi-factor-controlled ReRAM devices and their applications48
Near-infrared heterojunction field modulated phototransistors with distinct photodetection/photostorage switching features for artificial visuals48
Recent progress in single-molecule transistors: their designs, mechanisms and applications47
Tailoring quantum transport efficiency in molecular junctions via doping of graphene electrodes47
Ultra-fast low temperature scintillation and X-ray luminescence of CsPbCl3 crystals47
Bidentate aliphatic quaternary ammonium ligand-stabilized CsPbBr3perovskite nanocrystals with high PLQY (92.3%) and superior stability47
Effect of Sn valence state in the in situ growth of FeOOH precursor on the performance of the α-Fe2O3 photoanode46
Controllable bandgap-gradient halide perovskite films via dip-coating and halide anion exchange for multispectral photodiodes with high performance46
Mechanochemical synthesis of nonfullerene small molecular acceptors45
A smart microporous block copolymer membrane containing fluorescent europium complexes reports drug release through fluorescence changes45
Energy harvesting using two-dimensional (2D) d-silicates from abundant natural minerals45
Adamantyl ligand-induced one-dimensional CsPbBr3 perovskite nanocrystal formation: mechanism and anisotropic photoluminescence45
Circularly polarised photoluminescence and electroluminescence of chiral copper(i) dimers based onR/S-2,2′-bis(diphenylphosphino)-1,1′-binaphthalene ligands44
Two dye-encapsulated triple-emitting naphthalene-based Zr-MOFs for tunable white-light emission and dual mode detection of inorganic ions44
Air-stable high-PLQY cesium lead halide perovskites for laser-patterned displays44
Superconducting properties in doped 2M-WS2 from first principles44
Evaluation analysis of electromagnetic wave absorption for self-assembled 3D graphene skeleton-supported BN/SiC composites44
Toward real-world applications: promoting fast and efficient photoswitching in the solid state44
Near-infrared Cr3+-doped lead-free halide perovskite microcrystals for information encryption and temperature thermometry44
Non-aryl substituted aza-BODIPYs at 1,7- or 3,5-sites: synthesis, structures, optical properties, and applications44
Optical nonlinearity of Janus material TaSSe and its applications in fiber lasers44
Optimization of a triazine-based acceptor (CN-T2T) as the electron transport layer for highly efficient near-infrared perovskite light-emitting diodes43
Boltzmann-type cryogenic ratiometric thermometry based on Nd3+-doped LuVO4 phosphors43
Perspectives of thin-film lithium niobate and electro-optic polymers for high-performance electro-optic modulation43
Unleashing the glow: upconverting nanoparticles recharge persistent luminescent materials – applications in 3D-printing and optical coding43
Multifunctional MIL-101(Cr)-NH2/expanded graphite/multi-walled carbon nanotube/paraffin wax composite phase change materials with excellent thermal conductivity and highly efficient thermal43
(BixSb1−x)2Se3 thin films for short wavelength infrared region solar cells43
High energy harvesting performance in flexible piezocomposites by synergistic design of the piezoelectric phase and conductive phase43
Bifunctional solid state electrochromic device using WO3/WS2 nanoflakes for charge storage and dual-band color modulation43
Subphthalocyanine semiconducting cocrystals with efficient super-exchange coupling43
Low-power driven broadband phototransistor with a PbS/IGO/HfO2 stack43
Composition effects on exciton recombination dynamics of blue-emitting alloyed Cd1−xZnxS/ZnS quantum dots43
Preparation of WO3-based flexible electrochromic fabrics and their near infrared shielding application43
How to calibrate luminescent crossover thermometers: a note on “quasi”-Boltzmann systems42
High-performance ultra-low-voltage organic field-effect transistors based on anodized TiOx dielectric and solution-sheared organic single crystals42
Revealing the crystallization dynamics of Sb–Te phase change materials by large-scale simulations42
Novel blue multiresonance thermally activated delayed fluorescence host materials, including Ge-based bulky groups42
Semitransparent near-infrared Sn–Pb hybrid perovskite photodetectors42
CNT-functionalized electrospun fiber mat for a stretchable moisture-driven power generator42
Substrate-dependent spin crossover in an Fe(ii) scorpionate complex42
Consequence of optimal bonding on cation ordering and enhanced near-infrared luminescence in Cr3+-doped pyroxene oxides41
Improved emission cross-section of erbium and demonstration of energy transfer in As2Se3 thin films41
A DFT study of the mechanism of NH3-SCR NOx reduction over Mn-doped and Mn–Ti co-doped CoAl2O4 catalysts41
A tetrathiafulvalene salt of the nitrite (NO2) anion: investigations of the spin-Peierls phase41
Multifaceted insight into the cation-disordered self-activated luminescence of Zn3V2O8 compositions for lighting and pigment applications41
Mesogenic [Rh(L)4](A) complexes form mesophases with RhI⋯RhI-containing and triphenylene-discotic segregated columns. Effect of RhI⋯RhIinteractio41
A self-healing and antibacterial electronic skin based on a natural small molecule41
A visible to near-infrared nanocrystalline organic photodetector with ultrafast photoresponse41
Effects of ambient exposure on photoluminescence of Dion–Jacobson tin-based halide perovskites41
Particle size effect on the microstructure and the aging process of flash-sintered barium titanate from micro and nanopowders40
Metallic to half-metallic transition driven by pressure and anion composition in niobium oxyfluoride40
Harnessing lanthanides for blue-to-UVB upconversion and its dye-sensitization40
Highly fluorescent nitrogen-doped carbon dots with large Stokes shifts40
Compositional optimization of mixed cation Dion–Jacobson perovskites for efficient green light emission40
Nanofibrous films decorated with phosphorescent iridium(iii) complexes containing Ir–S–C–S structures for selective detection of Cu2+ ions in solution40
Boosted charge transfer and CO2 photoreduction by construction of S-scheme heterojunctions between Cs2AgBiBr6 nanosheets and two-dimensional metal–organic frameworks40
A comprehensive investigation into thermoelectric properties of PEDOT:PSS/Bi0.5Sb1.5Te3 composites40
Effect of spatial folding of molecules on two-photon absorption and nonlinear refraction in foldamers40
2D MXene interface engineering for organic solar cells39
A wearable and high-performance capacitive pressure sensor based on a biocompatible PVP nanofiber membrane via electrospinning and UV treatment39
Copolymerization induced emission of poly[(methylenelactide)-co-(2-vinylpyridine)]39
Tea helps neuromorphic computing: flexible memristors from tea polyphenols38
Bandgap and dimension regulation of CsPbI3 perovskite through a bromine-terminated ligand for efficient pure red electroluminescence38
Deterministic organic functionalization of monolayer graphene via high resolution surface engineering38
Enhancement of the intrinsic fluorescence of acridine and its induced circularly polarized luminescence (CPL) in ionic two-coordinate coinage metal complexes38
Manipulating the transition of aggregated states to control the photochromism in a new triphenylethylene derivative38
An all-inorganic CsPbBr3/GaN hetero-structure for a near UV to green band photodetector38
Preparation and properties of broadband reflective cholesteric-phase liquid crystal films based on chiral and achiral bilayer structures38
Scintillating thin film design for ultimate high resolution X-ray imaging37
Robust chain aggregation of low-entropy rigid ladder polymers in solution37
Ring-size dependent ratiometric photoluminescence of cyclophane mechanophores37
Lattice strain-induced high-performance low-operating-voltage organic field-effect transistors by solution-sheared organic single crystal37
Pressure mediated phase transition and dihydrogen bonding formation in trimethylamine borane37
Polar 2D hybrid perovskite crystals with intrinsic strong linear dichroism for polarization-sensitive and self-powered detection36
Mechanophotonics: fabrication of a 2 × 2 hybrid directional coupler from flexible organic crystals36
“Green” synthesis of highly luminescent lead-free Cs2AgxNa1−xBiyIn1−yCl6 perovskites36
Investigation of the stoichiometric deviation between the mixed cation, mixed halide lead perovskite thin film and its precursor solution36
Growth mechanism of oleylammonium-based tin and lead bromide perovskite nanostructures36
The unexpected mechanism of transformation from conventional room-temperature phosphorescence to TADF-type organic afterglow triggered by simple chemical modification36
Novel copper borate ceramics with lithium-based sintering aids for LTCC terahertz applications36
Nanostructured CeO2 ultrathin film deposited by the Langmuir Blodgett technique for highly sensitive and specific detection of sub ppm level NO2 gas at room temperature36
A PA66 lamellar crystal film with excellent triboelectric performance in vertical contact separation mode35
Dual conductive network sensors based on an MXene/PDES supramolecular elastomer and their performance35
Exploring the electronic and superior piezoelectric properties of two-dimensional PH-SiX materials for high-performance silicon-based devices35
Synthesis and property modulation of linearly polarized luminescent side-chain polymers with room-temperature phosphorescence35
Homochirality to design high-Tclead-free ferroelastic semiconductors35
Dynamics of the phase transition in Bi0.5Na0.5TiO3 based on in situ Raman spectroscopy35
Tunable construction of electrochemical sensors for chlorophenol detection35
Solution processable carbazole-benzophenone derivatives as bipolar hosts enabling high-efficiency stable green TADF organic LEDs35
Highly efficient platinum(ii) complexes overcoming Pt–Pt interactions and their applications in organic light-emitting diodes35
Flexible TiN/Ge photodetectors with enhanced responsivity via localized surface plasmon resonance and strain modulation35
Energy transfer-induced blue light-excited broadband near-infrared luminescence in fluoride Na3AlF6:Mn4+,Fe3+35
Photochromic/electrochromic strain sensor with a fast and reversible light-printing ability35
Quantitative identification of deposited energy in UV-transmitted KDP crystals from perspectives of electronic defects, atomic structure and sub-bandgap disturbance35
Modulation of the photothermal degradation of epoxy upon ultraviolet irradiation by polyhedral oligomeric silsesquioxane: a multiscale simulation study34
Recent advances in single crystal narrow band-gap semiconductor nanomembranes and their flexible optoelectronic device applications: Ge, GeSn, InGaAs, and 2D materials34
A post-reduction strategy to enhance near-infrared-II emission from Li4SrCa(SiO4)2:Cr4+ phosphors34
Improved photovoltaic performance of quinoxaline-based polymers by systematic modulation of electron-withdrawing substituents34
Modulated spontaneous and stimulated emission in luminescent films using one-dimensional photonic crystal filters34
The high piezoelectricity and thermal stability of high-temperature piezoelectric ceramics BiFeO3–0.25BaTiO3xBi0.5K0.5TiO3 near the MPB34
High-index facets and multidimensional hotspots in Au-decorated 24-faceted PbS for ultrasensitive and recyclable SERS substrates34
Deep-blue high-efficiency triplet–triplet annihilation organic light-emitting diodes using hydroxyl-substituted tetraphenylimidazole-functionalized anthracene fluorescent emitters34
Gallium nitride for ultrasensitive thermo-active switching in terahertz metamaterial micro–nanophotonic devices34
Power generation from n-type NbCo1−xNixSn and p-type NbFe1−xMnxSb ternary half-Heusler compounds: from materials development to 34
Magnetic field assisted fabrication of asymmetric hydrogels for complex shape deformable actuators34
Achieving super lithium storage of FeC2O4/Gs composites with dual-level structured graphene sheets through electrostatic adherence33
Morphology, size, and defect engineering in CeOHCO3 hierarchical structures for ultra-wide band microwave absorption33
Reduced graphene oxide layers full of bubbles for electromagnetic interference shielding33
Fabricating flexible conductive structures by printing techniques and printable conductive materials33
Efficient charge transport in a solid electrolyte with percolated Pt for solid-state fiber dye-sensitized solar cells33
Ultrafine-fiber thermistors for microscale biomonitoring33
Structural and photophysical investigation of single-source evaporation of CsFAPbI3 and FAPbI3 perovskite thin films33
Construction of a two-dimensional metal–organic framework with perpendicular magnetic anisotropy composed of single-molecule magnets33
Stability enhancement and pronounced three-photon absorption in SrCl2-doped FAPbBr3nano crystals33
Ligand modification enhanced quantum dot LEDs: principles and methods33
Self-assembled molecules as selective contacts in CsPbBr3 nanocrystal light emitting diodes33
Coordination of hydrogen-bonding and π–π stacking induced elasticity and efficient optical-waveguiding in 4,7-bis(phenyl ethynyl)benzo[c][1,2,5] thiadiazole-based crystals32
Preparation of phase-pure MgTiO3 microwave dielectric ceramics for GPS antenna application32
Boosted mechanosensitivity of stretchable conductive composite strain sensors based on kirigami cut design32
Highly efficient blue emitting one dimensional lead-free nanocrystals32
Te and Ge solid-state reaction: comparison between the 2D and 3D growth of α-GeTe32
Anti-interference monitoring of sweat pH: a new sensing mechanism based on the p–n transition potential of a flexible Bi2O3photoelectrode32
Ratiometric fluorescence analysis for miR-141 detection with hairpin DNA-templated silver nanoclusters32
Mechanistic insights into supersaturation mediated large area growth of hexagonal boron nitride for graphene electronics31
Design of potential singlet fission chromophores based on diketofurofuran: an alternative to diketopyrrolopyrrole31
Shape memory photonic materials: fabrication and emerging applications31
Recent advances in small-molecule organic fluorescent semiconductors31
The gas-sensing performance of a core–shell SnO2-based chemiresistive MEMS sensor for H2S detection under vacuum31
An ultra-sensitive fluorescence multi-channel and colorimetric probe based on salicylaldehyde hydrazone for Al3+ recognition with a 3 : 1 binding ratio31
Carbon-rich macrocycles and carbon nanoribbons as unique optical materials31
Ultrasonication-driven downscaling and formation of Lewis acid–base sites in hydrogen-bonded Co metal–organic frameworks trigger exceptional catalytic performance for the Knoevenagel condensation reac31
An efficient and recyclable Ni2P–Co2P/ZrO2/C nanofiber photocatalyst for the conversion of plastic waste into H2 and valuable chemicals31
Soft actuators based on the flexible MOF MIL-88B(Fe) with a fast response to various organic solvent vapours31
Benzothiadiazole and its derivative-based sp2carbon-conjugated covalent organic frameworks for photocatalytic hydrogen generation31
Far-red emission carbon dot–metal organic frameworks composite for plant growth regulation application31
Size-dependent electromagnetic wave absorption of 3C–SiC particles31
Physical insights into the ultralow lattice thermal conductivity and high thermoelectric performance of bulk LiMTe2 (M = Al, Ga)31
Improving the performance and stability of perovskite solar cells via surface passivation of phthalimide N-alkylammonium iodides31
CoV2O6 coupled with MXenes as a highly efficient electrocatalyst for water splitting31
Pre- and post-assembly modifications of colloidal plasmonic arrays: the effect of size distribution, composition and annealing30
A step forward in unraveling the lanthanide discrimination puzzle: structure–selectivity relationship based on phenanthroline diimide ligands towards europium and terbium detection in water30
Rational design of dimensionally matched 2D/2D COF based photocatalysts for highly efficient noble-metal-free solar energy catalysis30
Green multi-resonance thermally activated delayed fluorescence emitters containing phenoxazine units with highly efficient electroluminescence30
Energy harvesting devices and smart sensors based on porous sponge-type triboelectric nanogenerators30
Multi-stimuli responsive organic polymorphic crystals: anisotropic elasticity and plasticity, mechanochromism and photomechanical motions30
Spectroscopic comparison of charge dynamics in fullerene and non-fullerene acceptor-based organic photovoltaic cells30
Metal halide perovskite single crystal growth and application for X-ray detectors30
High-efficiency solution-processed triplet–triplet annihilation organic light-emitting diodes using oligocarbazole- and benzonitrile-modified polyaromatic blue fluorescent emitters30
Three-dimensional printed cellulose nanofibers/carbon nanotubes/silicone rubber flexible strain sensor for wearable body monitoring29
Optical temperature sensing properties and thermoluminescence behavior in Er-modified potassium sodium niobate-based multifunctional ferroelectric ceramics29
Wet-etching fabrication of flexible and transparent silicon frameworks for imperceptible wearable electronics29
Compositional influence of local and long-range polarity in the frustrated pyrochlore system Bi2−xRExTi2O7(RE = Y3+,Ho3+29
Effects of molecular ordering on circularly polarized emission from a twisted mesogenic conjugated polymer29
Europium(ii) complexes with substituted triethylenetetramine: new emitters to construct efficient deep blue organic light emitting diodes by spin coating29
Simultaneously enhancing hole extraction and defect passivation with more conductive hole-selective self-assembled molecules for efficient inverted perovskite solar cells29
Recent progress in open-shell organic conjugated materials and their aggregated states29
Acoustic emissions from spin crossover complexes29
Defect-assisted wavelength dependence of one photon and multiphoton absorptions in a composite nanofiber of polyvinylpyrrolidone and hexagonal boron nitride29
Thermally stable rare-earth-free double perovskite phosphors toward dual-mode optical thermometry and dual-functional lighting sources29
Efficient van der Waals layered gallium telluride-based passive photodetectors for low-power-density sensing of visible light29
Distinct bulk emission properties of the hexacatenar molecules by varying the polarity of peripheral chains29
Recyclable EGaIn/TPU sheath–core fibres for superelastic electronics and sensing applications29
EuIII functionalized silica nanoparticles encapsulating chiral CrIII complexes with simultaneous unpolarized red and polarized NIR-I luminescence29
Synthesis, optical and redox attributes of core-/bay-substituted thionated NDIs, PDIs and their diverse radical anions29
The role of substrates and electrodes in inkjet-printed PEDOT:PSS thermoelectric generators29
Advances in the visualization and thermal management of electrochromic materials29
Intensive and thermally conductive boron nitride/aramid nanofiber composite fibers fabricated via a wet spinning technique28
The paradigm of the filler's dielectric permittivity and aspect ratio in high-k polymer nanocomposites for energy storage applications28
Kilogram-scale high-yield production of PbI2 microcrystals for optimized photodetectors28
Sn(SCN)2 as an additive for improving the hole transport properties of PEDOT:PSS in organic photovoltaics28
Carbon-enveloped pea-shaped vanadium nitride nanorods for aqueous zinc ion batteries28
Fundamental luminescence properties of Mn4+ activated Ca14Al10Zn6O35 phosphor28
Water-induced ultrastrong green emission in Cs4PbBr6 quantum dot glass28
Ti3+ self-doping in BaTiO3 ceramic for multi-sensor applications: reduced bandgap with maintained ferroelectric properties28
Ratiometric SERS detection of N2H4 by porous Ag(i)-linked Waugh-type polyoxometalate as an efficient label-free substrate28
Efficient thermally activated delayed fluorophores featuring multi-donor arms and a π-extended acceptor core28
Stretchable, ultralow detection limit and anti-interference hydrogel strain sensor for intelligent throat speech recognition using Resnet50 neural network28
Hydrothermal synthesis of stable lead-free Cs4MnBi2Cl12 perovskite single crystals for efficient photocatalytic degradation of organic pollutants28
Green synthesis of ultrathin 2D nanoplatelets, hematene and magnetene, from mineral ores in water, with strong optical limiting performance28
Highly efficient blue electroluminescence based on TADF emitters with spiroacridine donors: methyl group effect on photophysical properties28
Control over microphase separation and dielectric properties via para-fluoro thiol click reaction28
Construction of ternary RuP2/Ti4P6O23@TiO2 photocatalysts for efficient photocatalytic biomass selective oxidation and water splitting28
Tuning defects in Cu2O nanostructures via room temperature mechanical pressing: impacts on defect-dependent optical and photoelectrochemical sensing performances28
Preparation and formation mechanism of few-layer black phosphorene through liquid pulsed discharge28
Multi-mode enhanced Raman scattering spectroscopy using aggregation-free hybrid metal/metal-oxide nanoparticles with intrinsic oxygen vacancies28
The first characterization of cubic Nd3+-doped mixed La2MoWO9 in micro-crystalline powders and translucent micro-ceramics28
Improving the uniformity of the inkjet-printed polymer film in a bank by Marangoni flow and contact line sliding27
Optical fiber temperature sensor of Er3+/Yb3+ codoped LaGaO3 microcrystals with high reliability and stability27
A strong coupling mechanism between ferromagnetism and piezoelectricity in 2D ferroelectric CrXSYBrZ with high carrier mobility27
A temperature dependent power-law drain current model for coplanar OFETs27
Rational molecular design of phenanthroimidazole–azine derivatives for efficient non-doped blue organic light-emitting diodes with low-efficiency roll-off27
Incorporating amidine groups into photonic cholesteric polymer networks for food quality sensing27
Two-dimensional Janus monolayers Al2XYZ (X/Y/Z = S, Se, Te, X ≠ Y ≠ Z): first-principles insight into the photocatalytic and highly adjustable piezoelectric properties27
Bis(corannulenyl)ethene as an efficient photochromic material27
0.10525703430176