RSC Advances

Article	Citations
In vivo and in silico evaluation of the phytoalexin-eliciting activity in common bean (Phaseolus vulgaris L.) of jasmonoyl-l-isoleucine analogs having a pyrazolidin-3-o	733
Upgrading furfural to bio-fuels using supported molybdenum carbides: study of the support effect	674
Safety evaluation of Plukenetia volubilis seeds: a metabolomic profiling and network toxicology approach	390
An attempt to prepare sulfonyl analogues of fotemustine: unexpected rearrangement to sulfamate during nitrosation step	375
A rapid construction of 1,3,2-benzodiazaborininones [R–B(aam)] from boronic acids and anthranilamides	323
Diastereoselective C-alkylation of aldimines, derived from chiral α-carbon heteroatom-substituted aldehydes, with triethylborane. Application to the synthesis of benzylisoquinolines	308
Efficient dispersive solid-phase extraction of methylprednisolone from exhaled breath of COVID-19 patients	287
One-step fabrication of three-dimensional macropore copolymer-modified polycarbonate array by photo-crosslinking for protein immunoassay	275
High-efficiency detection of primary amine-based chiral molecules by a facile aldimine condensation reaction	274
Boronic acid-functionalized Fe3O4 nanoparticles for activity-preserved enrichment of low-abundance bacteria from real samples	264
Synthesis of benzo[b]furans from alkynyl sulfoxides and phenols by the interrupted Pummerer reaction	262
In situ electrochemical monitoring with an open circuit auxiliary electrode in microbial electrochemical cells treating sediments	261
Introduction to the RSC Advances themed collection on nano and microscale modifications of biomaterials	245
Effect of defect-healing treatment on layered silicate precursors toward well-defined crosslinked frameworks	233
Investigating the role of microwave thermal and non-thermal effects on WO3-graphene oxide composite synthesis	231
Reactions of noble-metal oxides in ionic liquids near room temperature	206
Harnessing anisotropy in liquid crystal elastomer based lithium-ion gel-polymer batteries	206
Strain hardening in biaxially stretched elastomers undergoing strain-induced crystallization	202
Predicting rejection of emerging contaminants through RO membrane filtration based on ANN-QSAR modeling approach: trends in molecular descriptors and structures towards rejections	201
Enhanced biogeochemical remediation of Pb-contaminated loess via MICP integrated with graphene nanomaterials	190
A novel modified nano-alumina composite sol for potential application in forest firefighting	187
Exploiting poly(safranine) and poly(luminol) for sensing applications. A mini review	185
Application of biodegradable cholinium ionic liquids for the extraction of 5-hydroxymethylfurfural (HMF) from honey	184
Ligand-assisted morphology regulation of AuNi bimetallic nanocrystals for efficient hydrogen evolution	176
Molecular insight into oil displacement by CO2 flooding in water-cut dead-end nanopores	171

Dansyl fluorophore functionalized hierarchically structured mesoporous silica nanoparticles as novel latent fingerprint development agents	170
Unraveling the photophysical characteristics and biological applications of vinyl sulfones as viscosity sensors	168
A biomimetic nano-NET strategy for the treatment of MRSA-related implant-associated infection	167
Cu(ii) immobilized on poly(guanidine-sulfonamide)-functionalized Bentonite@MgFe2O4: a novel magnetic nanocatalyst for the synthesis of 1,4-dihydropyrano[2,3-c]p	166
Synthesis and characterization of novel poly cysteine methacrylate nanoparticles and their morphology and size studies	162
DRGD-linked charged EKKE dimeric dodecapeptide: pH-based amyloid nanostructures and their application in lead and uranium binding	154
Quantum modeling of dimethoxyl-indaceno dithiophene based acceptors for the development of semiconducting acceptors with outstanding photovoltaic potential	152
RNA 2′-OH modification with stable reagents enabled by nucleophilic catalysis	146
Cumingianols G and H, new 14,18-cycloapoeuphane triterpenoids from the Taiwan Dysoxylum cumingianum C. DC.	145
Developing the half-metallic ferromagnetism in semimetal germanene monolayer: synergistic effects of band gap opening and magnetism engineering	143
Synthesis of biocompatible gold nanoparticles for photothermal therapy by mineralization using peptides	142
Novel environmental applications of green tea: sensing and remediation of Ag+ in aqueous system	141
Highly sensitive detection of alpha-fetoprotein using sandwich sensors	139
Kinetically controlled self-assembly of Zn-porphyrin nanostructures via surfactant-assisted micelle formation	137
APTES derived polymer with naphthalimide pendant for the fluorescent sensing of picric acid	137
Cr(vi) permanently binds to the lipid bilayer in an inverted hexagonal phase throughout the reduction process	134
Fabrication of highly luminescent red-emissive carbon dots and their enhancement of cotton growth promoted by La3+	133
Enhanced cycle life of starter lighting ignition (SLI) type lead–acid batteries with electrolyte modified by ionic liquid	132
Selective arrangement of three types of calcium–terbium tetranuclear cores by a thiacalixarene ligand using thermodynamic and kinetic strategies	132
A facile in situ integration of red mud-derived metal oxides into graphene sheets for sulfamethoxazole removal from water	131
Thermo-sensitive C 3 N 4 for efficient photocatalytic degradation of methyl orange	129
Homogeneous base catalyst with high activity and stability for synthesis of dimethyl carbonate by transesterification	124
Synergistic g-C3N4@SnO2 nano heterostructures and their application for enhanced humidity sensing	124
Selective and green conversion of 5-HMF to FDCA via enzymatic (laccase) and transition metal (MnO 2 an	124
Injectable, stretchable, toughened, bioadhesive composite hydrogel for bladder injury repair	124
Deep eutectic solvent extraction of myricetin and antioxidant properties	122
Effect of a polymeric compound layer on jetting dynamics produced by bursting bubbles	122
Micropatterned superhydrophobic meshes coated with low-cost carbon nanoparticles for efficient oil/water separation	122
Copper-modified graphene oxide and reduced graphene oxide nanocomposites for the photo-assisted removal of basic blue-3 dye	121
Molecular modeling and DFT studies on the antioxidant activity ofCentaurea scopariaflavonoids and molecular dynamics simulation of their interaction with β-lactoglobulin	120
Synthesis and characterisation of microporous, conducting, photoactive novel pyrene containing material	118
Layered double hydroxide based composite core–shell electrospun nanofibers for lead and fluoride filtration from contaminated streams	116
Preparation and corrosion resistance of superhydrophobic Ni–Co–Al2O3 coating on X100 steel	115
Synthesis and antibiotic potential of myxocoumarin-inspired chromene dione analogs	110
Polarization enhanced photoresponse of InSe via 2D ferroelectric CuCrP 2 S 6<	110
Four newly synthesized enones induce mitochondrial-mediated apoptosis and G2/M cell cycle arrest in colorectal and cervical cancer cells	110
Reusing expired streptomycin and neomycin drugs as potential corrosion inhibitors for high brass alloys in NaCl solution: quantum, chemical, surface and electrochemical investigations	109
Build-up shielding-factors, and physical & mechanical properties of borosilicate glasses with varied CeO 2 contents	107
Fabrication and characterization of a chitosan/cyclodextrin/TiO2-NPs composite for preservation of avocados	106
Study on the effect of an ultrasound assisted reaction on the crystallization properties of recovered cryolite	106
Deep eutectic solvent-assisted fabrication of bioinspired 3D carbon–calcium phosphate scaffolds for bone tissue engineering	105
Ultrasonic-induced synthesis of novel diverse arylidenes via Knoevenagel condensation reaction. Antitumor, QSAR, docking and DFT assessment	101
A silica-supported palladium oxide catalyst (PdO@MCM-41) selectively cleaves ether linkages in lignin model compounds and alkali lignin via intramolecular hydrogen transfer	100
Insight into TLR4 receptor inhibitory activity via QSAR for the treatment of Mycoplasma pneumonia disease	99
Enhanced thermoelectric performance of PEDOT:PSS/SWCNT/PDDA three-component composite films	99
Effect of impregnation strategy on structural characteristics of Ce–Mn/Al2O3 and its catalytic ozonation of benzoic acid	99
Li 4 Ti 5 O 12 @carbon nanotube arrays as high-	97
Engineering multifunctionality in gallium oxide: unveiling novel structural, electronic, and opto-mechanical attributes of gadolinium-doped β-Ga 2 O	96
RP-HPLC method development and validation for the quantification of prednisolone and salbutamol with their simultaneous removal from water using modified clay–activated carbon adsorbents	96
Correction: Synthesis and multifaceted exploration of dibenzoxepinones: in vitro antimicrobial and ct-DNA binding, DFT/TD-DFT, molecular docking and simu	95

Water-soluble binuclear aquo Cu( ii ) complex with an amide ligand as an electrocatalyst for the OER, HER and CO 2	95
Novel A-π-D-A organic dyes for better photovoltaic performance	95
Herbal molecule-mediated dual network hydrogels with adhesive and antibacterial properties for strain and pressure sensing	94
Alkyne-tethered oligodeoxynucleotides that allow simultaneous detection of multiple DNA/RNA targets using Raman spectroscopy	94
Efficient removal of methyl orange and ciprofloxacin by reusable Eu–TiO2/PVDF membranes with adsorption and photocatalysis methods	93
Fluorene- and fluorenone-based molecules as electron-transporting SAMs for photovoltaic devices	92
Ultrasensitive and selective colorimetric and smartphone-based detection of arsenic ions in aqueous solution using alliin–chitosan–AgNPs	92
Nanomicrosphere sustained-release urokinase systems with antioxidant properties for deep vein thrombosis therapy	91
LC-MS-based metabolomic characterization of Tinospora crispa extracts: impact of solvent selection on phytochemical composition and antioxidant propertie	91
Preparation of nanocellulose and application of nanocellulose polyurethane composites	91
Harnessing limonene and Fenton's reagent for enhanced micro- and nanoplastic removal from aquatic systems	90
Packed-nanofiber solid phase extraction for daidzein, genistein, glycitein in human urine and their simultaneous detection	90
Influence of gas molecule adsorption on the mechanical properties of the graphene/aluminum interface	90
Evaluation of dual potentiality of 2,4,5-trisubstituted oxazole derivatives as aquaporin-4 inhibitors and anti-inflammatory agents in lung cells	90
Evaluation of quantum chemistry calculation methods for conformational analysis of organic molecules using A-value estimation as a benchmark test	90
Confined microemulsions: pore diameter induced change of the phase behavior	89
Bridging the size gap between experiment and theory: large-scale DFT calculations on realistic sized Pd particles for acetylene hydrogenation	86
Robust method for uniform coating of carbon nanotubes with V2O5 for next-generation transparent electrodes and Li-ion batteries	86
Desorption and ablation regimes in UV-MALDI: the critical fluence	85
Correction: The influence of electron utilization pathways on photosystem I photochemistry in Synechocystis sp. PCC 6803	85
Carbon dots using a household cleaning liquid as a dopant for iron detection in hydroponic systems	85
Correction: From micro/nano structured isotactic polypropylene to a multifunctional low-density nanoporous medium	84
Correction: Effects of Ni precursors on the formation of Mg–Fe–Ni intermetallic hydrides, kinetics, and reversibility	83
Correction: Development of a chromium oxide loaded mesoporous silica as an efficient catalyst for carbon dioxide-free production of ethylene oxide	82
Retraction: The structural and luminescence properties of plexcitonic structures based on Ag 2 S/ l	81
Correction: Insight into mineralizer modified and tailored scorodite crystal characteristics and leachability for arsenic-rich smelter wastewater stabilization	81
Retraction: The iron group transition-metal (Fe, Ru, Os) coordination of Se-doped graphitic carbon (Se@g-C 3 N 4	81
Correction: The influence of bicarbonate concentration and ionic strength on peroxide speciation and overall reactivity towards UO 2	81
Retraction: Adsorption and sensor performance of transition metal-decorated zirconium-doped silicon carbide nanotubes for NO 2 gas application: a com	81
Expression of concern: Impact of some pyrrolidinium ionic liquids on copper dissolution behavior in acidic environment: experimental, morphological and theoretical insights	81
Zinc molybdenum thiovanadate nanoparticles: synthesis, characterization, and antibacterial activity	80
Correction: Brush-like block copolymer synthesized via RAFT polymerization for graphene oxide aqueous suspensions	80
Ti and Zr complexes bearing guanidine-phenolate ligands: coordination chemistry and polymerization studies	79
Color tuning in lanthanide ions doped upconversion nanocrystals	78
Synthesis of azulenyl-substituted gold( i )-carbene complexes and investigation of their anticancer activity	78
MA’AT analysis of the O-glycosidic linkages of oligosaccharides using nonconventional NMR J-couplings: MA’AT and MD models of phi	78
Towards biotechnological production of bio-based low molecular weight esters: a patent review	78
CdO decorated CdS nanorod for enhanced photocatalytic reduction of CO2 to CO	78
Sustainable removal of methylene blue from wastewater using silica sand coated with Al 2 O 3 nanop	76
Microwave-assisted synthesis and functionalization of 2-arylimidazo[1,2-a]pyrimidin-5(8H)-ones	75
Synergistic effect of porous carbon shell confinement and catalytic conversion of nickel nanoparticle cores for improved lithium–sulfur batteries	75
Production and processing of zein nanoparticles as structural colorants	75
Simultaneous catalytic oxidation of Hg0 and AsH3 over Fe–Ce co-doped TiO2 catalyst under low temperature and reducing atmosphere	75
Injectable, self-healing and degradable dynamic hydrogels with tunable mechanical properties and stability by thermal-induced micellization	75
Thermal management of lithium-ion batteries: from single cooling to hybrid cooling	75
Design, synthesis, and in silico studies of new benzofuran–pyrazole hybrids as multi-kinase inhibitors with potential antiproliferative activity	75
Electrochemical and power conversion performance of different counter electrode materials for flexible dye-sensitized solar cells	75
Application and development of sludge-based materials for environmental pollution remediation: a bibliometric review from 2004 to 2024	74
An environment-friendly approach using deep eutectic solvent combined with liquid–liquid microextraction based on solidification of floating organic droplets for simultaneous determination of preserva	74
Effect of regio-specific arylamine substitution on novel π-extended zinc salophen complexes: density functional and time-dependent density functional study on DSSC applications	74
Analysis of per- and polyfluoroalkyl substances (PFAS) removal with activated carbon using 19 F nuclear magnetic resonance spectroscopy	74
Non-stick performance of polymethylsilsesquioxane thin films synthesized by sol–gel spray coating	74
Direct synthesis of carbamates, thiocarbamates, and ureas from Boc-protected amines: a sustainable and efficient approach	74
Lysine-based non-cytotoxic ultrashort self-assembling peptides with antimicrobial activity	74
Characterization of key aroma compounds of fried pepper sauce under different pretreatment processes	74
Expression of Concern: Construction of a binary S-scheme S-g-C3N4/Co-ZF heterojunction with enhanced spatial charge separation for sunlight-driven photocatalytic performance	73
Evaluation of blood pressure using a flexible and wearable capacitive pressure sensor	73
Utilization of natural and waste sources for synthesis of cellulose, chitin, and chitosan for a suitable environment	73
Synthesis and characterization of thiol-stabilized gold nanoparticles appended to bis(pyrazole) pyridine for fabrication of rectangular nano/microstripes and their spin crossover and SERS studies	72
Multiplex one-step direct asymmetric PCR of blood and dual-labelled probe-mediated melting curve for genotyping of MTHFR and MTRR polymorphisms	72
Experimental and ML-assisted optimization of injection timing and EGR in a diesel engine fueled with palmyra biodiesel	72
Advancement in photocatalytic degradation of ciprofloxacin: mechanisms, materials and environmental remediation	71
Molecular biology insights into levofloxacin-loaded ZnO nanoparticles: a potent strategy against MDR Acinetobacter baumannii	70
Construction of a nanozyme composite drug delivery system based on columbianadin for inflammatory bowel disease therapy	70
Luminescent, and thermometric properties of Er 3+ -activated NaCaGd(WO 4 )	70
Accurate assembly of thiophene-bridged titanium-oxo clusters with photocatalytic amine oxidation activity	70
Thermochemical and photochemical aerobic oxidation of benzylic alcohols in the presence of Cu( ii ) nitrate, DDQ, and their combination	70
Radiation-induced neurotoxicity: investigating human neuronal damage in MEA-integrated microfluidic platforms	69
Efficient enzymatic synthesis of chiral 2,3-dihydro-1,4-benzodioxane motif using engineered Candida antarctica lipase B	69
Green synthesis of silver nanoparticles with Torenia fournieri leaf extracts and assessing the antioxidant and antibacterial properties,	69
Architectural design and affecting factors of MXene-based textronics for real-world application	68
3D printing in microfluidics: experimental optimization of droplet size and generation time through flow focusing, phase, and geometry variation	67
Correction: Correction: Influence of Ni content on structural, magnetocaloric and electrical properties in manganite La0.6Ba0.2Sr0.2Mn1−xNix<	67
Preparation of SA/P(U-AM-ChCl) composite hydrogels by frontal polymerization and its performance study	67
Beyond fossil plastics: next-generation PLA-based bio-packaging for industrial applications – advances, challenges, and data-driven insights	67
Development of N-alkylated benzimidazole based cubosome hydrogel for topical treatment of burns	66
Nanoclay-reinforced alginate aerogels: preparation and properties	66
Preparation of cyclodextrin polymer-functionalized polyaniline/MXene composites for high-performance supercapacitor	66
Strategic integration of carbon nanotubes over the redox-active surfaces of FeCo 2 S 4 as an elect	66
Removal of active pharmaceutical compounds in Primalan and Diane using pumpkin biochar: synthesis, characterization, and adsorption study	65

Synaptic plasticity and learning behaviour in multilevel memristive devices	65
Photonic-chemostat engineering for efficient continuous cultivation of cyanobacteria	64
Eco-friendly and efficient catalyst-free synthesis of N-sulfonylimines from sulfonamides and aldehydes: crucial role of Al2O3 as a reusable dehydrating agent	63
Utilization of non-plasticized polymer inclusion membrane for highly selective colorimetric sensor detection of zirconium in environmental samples	63
Dual-functionalized lignin as a sustainable modifier for high-performance phenol-formaldehyde adhesives in plywood production	63
Application of perovskite type oxide LaxCe1−xcoo3 in lignin depolymerization and mono-phenol preparation	63
Sustainable production of catechol derivatives from waste tung nutshell C/G-type lignin via heterogeneous Cu–NC catalytic oxidation	62
Simple synthesis of 2-(phenylsulphinyl)benzo[ d ]oxazole derivatives via a silver-catalysed tandem condens	62
Towards the activity of twisted acyclic amides	62
Structural, optical, and electrical dynamics of Cs 3 Fe 2 Cl 9	62
Highly sensitive ultra-performance liquid chromatography coupled with triple quadrupole mass spectrometry detection method for levoglucosan based on Na+ enhancing its ionization efficiency	62
Surface modulation for highly efficient and stable perovskite solar cells	62
Tribological behaviors of an attapulgite–graphene nanocomposite as an additive for mineral lubricating oil	62
Electrolytic reduction of CrF3 and Cr2O3 in molten fluoride salt	61
Rapid and sensitive electrochemiluminescence detection using easily fabricated sensor with an integrated two-electrode system	61
Graphene oxide:Fe2O3 nanocomposites for photodetector applications: experimental and ab initio density functional theory study	61
Advancements in tantalum based nanoparticles for integrated imaging and photothermal therapy in cancer management	61
The mineral manaksite, KNaMnSi4O10, as a supercapattery-type electrochemical energy storage material	61
Layer-by-layer assembly of tetra-Mn-containing 30-tungsto-4-phosphate, [M4(H2O)2(P2W15O56)2]n− (M = Mn	60
A facile on–off fluorescence approach for fluvoxamine determination in pharmaceutical tablets; application to content uniformity testing	60
Development of a cationic polyethyleneimine-poly(lactic-co-glycolic acid) nanoparticle system for enhanced intracellular delivery of biologics	60
Synthesis of CuSe/PVP/GO and CuSe/MWCNTs for their applications as nonenzymatic electrochemical glucose biosensors	59
Dye-sensitized solar cells based on highly catalytic CNTs/Ti 3 C 2 T	59
Synthesis and characterization of potential polycyclic energetic materials using bicyclic triazole and azetidine structures as building blocks	59
Experimental and in silico insights: interaction of dimethyl sulphoxide with 1-hexyl-2-methyl imidazolium bromide/1-octyl-2-methyl imidazolium bromide at	59
Microwave-enhanced antibacterial activity of polydopamine–silver hybrid nanoparticles	59
A nonsolvolytic fluorine/LiNO 3 -containing electrolyte for stabilizing dynamic interfaces in Li||LiMn 2	59
An energy decomposition and extrapolation scheme for evaluating electron transfer rate constants: a case study on electron self-exchange reactions of transition metal complexes	59
Construction of 3D lithium metal anode using bi-functional composite separator: a new approach for lithium battery	59
Design, synthesis, and antiproliferative screening of new quinoline derivatives bearing a cis -vinyl triamide motif as apoptosis activators and EGFR-TK i	58
Biodegradable Prussian blue/manganese dioxide core–shell nanoparticles with open cages for imaging-guided chemo-photothermal combined therapy of cancer cells	58
A novel μ 3 -CO 3 bridged linear polymeric Cu-complex ([Cu 3	58
Effect of honey, as a natural deep eutectic solvent, on the phytochemical stability and anti-inflammatory activity of Eurycoma longifolia Jack	58
Piperidine-catalyzed synthesis of ( E )-2-cyanoacrylamides: crystallographic, antiproliferative, and docking studies	58
A photothermal MoS 2 decorated biomass carbon-based aerogel with a directionally aligned porous structure for mitigating heavy metal stress under sea	58
Strain engineering of optoelectronic and ferroelectric properties in R 3-phase Zn 3 TeO	58
Self-diffusion and shear viscosity of pure 1-alkanol unary system: molecular dynamics simulation and review of experimental data	58
Eco-friendly fabrication of sandwich-structured poly(imide-siloxane)/silver nanowire composite films for stretchable strain sensors	57
Composition of the isopropanol-soluble portion and fast pyrolysis product distribution of the insoluble part from Pakistani lignite	57
Harnessing natural compounds and nanotechnology for miRNA-based osteosarcoma therapy	57
Study on preparation and performance of cement-stabilized macadam containing ground sludge gasification slag (GSGS)	57
Enhancing amantadine delivery through PLGA micelles: a novel approach using oleic acid and Pluronic F68 for sustained release and reduced toxicity	56
Development of hybrid nanoparticles based on Zr( iv ) and perylene-3,4,9,10-tetracarboxylic acid with visible-light photoredox activity	56
Exploring allosteric properties of mammalian ALOX15: octyl ( N -(4-(benzofuran-2-yl)-2-methoxyphenyl)sulfamoyl)- and octyl ( N	56
Effect of surface modification on silica supported Ti catalysts for cyclohexene oxidation with vapor-phase hydrogen peroxide	56
Synergistic anti-friction performance and lubricating film mechanism of erucamide and N -phenyl-α-naphthylamine in polyurea grease at elevated temperatur	56
Muhenrins A–C, pimarane-type diterpenoids from Munronia henryi	56
Towards green, scalable peptide synthesis: leveraging DEG-crosslinked polystyrene resins to overcome hydrophobicity challenges	56
A safe and efficient synthesis of N-Boc-β 3 -amino acid methyl esters from α-amino acids: applications in the formal synthesis of sedum alkaloids	56
Ionic liquid microemulsion-mediated heterogels with bicontinuous conductive channels for an ionic flexible sensor	56
Vinasse photoreforming for hydrogen production using Pt/TiO 2 as catalyst under UV irradiation	56
Tetraimidazolium macrocycle: a versatile building block and precursor for box-type coordination cages	56
Valorizing biomass into ultrahigh-surface-area porous carbon for sustainable next-generation energy storage	55
Investigating the enhancement of the rate of CO 2 capture of CaO in the presence of steam through 18	55
Enhancing the corrosion inhibition of copper sheets in oil-in-water (O/W) emulsions by combining two organic heterocyclic derivatives	55
Nanostructured MnOx/g-C3N4 for photodegradation of sulfamethoxazole under visible light irradiation	55
Dihydropyrimidine-2-thione derivatives as SARS-CoV-2 main protease inhibitors: synthesis, SAR and in vitro profiling	55
Exploration of the aromatic abietane diterpenoid scaffold in the development of ArnT-mediated colistin resistance inhibitors	55
Multifunctional separator engineering via FeCo 2 O 4	55
Full-component extract of Crithmum maritimum and its effect on epidermal regeneration	55
A systematic assessment of matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) application for rapid identification of pathogenic microbes that affect food crop	54
Preparation of a robust hierarchical superhydrophobic surface with superior corrosion resistance	54
Facile one-pot hydrothermal synthesis of a zinc oxide/curcumin nanocomposite with enhanced toxic activity against breast cancer cells	54
Engineering the defects of UiO-66 MOF for an improved catalytic detoxification of CWA simulant: methyl paraoxon	54
Pressure-dependent physical properties of cesium–niobium oxide: a comprehensive study	54
SiO2@AuAg/PDA hybrid nanospheres with photo-thermally enhanced synergistic antibacterial and catalytic activity	54
Nanoscale carbon dot-embedded metal–organic framework for turn-on fluorescence detection of water in organic solvents	54
Synthesis, docking and biological evaluation of purine-5-N-isosteresas anti-inflammatory agents	53
Enhanced stability and tunable photoluminescence in Mn2+-doped one-dimensional hybrid lead halide perovskites for high-performance white light emitting diodes	53
Identification of perrhenate-binding peptides by phage display	53
A novel cyan-emitting fluorescent α-amino acid: synthesis, photophysical characterization and live-cell imaging properties	53
Bio-based unsaturated polyester resin from post-consumer PET	53
Insights into the electronic, magnetic structure, and photocatalytic activity of Y2CuMnO6 double perovskite	53
Solution-processed nickel oxide passivation on large-area silicon electrodes for efficient photoelectrochemical water splitting	53
Growth and morphological control of metastable KDP crystals using defect-free seeds	53
De novo creation of fluorescent molecules via adversarial generative modeling	53
Chemical and morphological evolution of hybrid conversion coatings in low-Earth orbit space environment	53
Performance of ionic liquid functionalized metal organic frameworks in the adsorption process of phenol derivatives	53
Controllable Cu + /Cu 2+ ratio for the gas-sensing property of (Na, Cu) co-doped ZnO investigated	53
Mechanism of the influence of cationic moieties on the performance of fluid loss additives for well cementing via fluorescence labeling	53
A novel nanodrug for the sensitization of photothermal chemotherapy for breast cancer in vitro	52
A theoretical analysis of the vibrational modes of ammonium metavanadate	52
Neutron, X-ray diffraction, DSC, Raman, Mössbauer and leaching studies of iron phosphate glasses and crystalline phases	52
Preparation of geometrically highly controlled Ga particle arrays on quasi-planar nanostructured surfaces as a SCALMS model system	51
Material characterization and biocompatibility of polycarbonate-based polyurethane for biomedical implant applications	51
Eco-friendly synthesis of ZnO nanoparticles using Delonix elata extract with enhanced antibacterial activity	51
Copper-promoted oxidative mono- and di-bromination of 8-aminoquinoline amides with HBr and DMSO	51
CO2-laser-induced carbonization of calcium chloride-treated chitin nanopaper for applications in solar thermal heating	51
SiC coated, CNT nanowire reinforced copper composite: preparation, microstructure and properties	51
Interface contact and modulated electronic properties by in-plain strains in a graphene–MoS2 heterostructure	51
Application of 3D printing technology for green synthesis of Fe2O3using ABS/TPU/chlorella skeletons for methyl orange removal	51
Reductive degradation of carbon tetrachloride using tree leaf polyphenol–iron complexes for groundwater remediation	51
Systematic design and optimisation of layer-by-layer nanocomposite coatings on three-dimensional porous scaffolds for enhanced mechanical performance in bone tissue engineering applications	51
Operando Raman spectroscopy for investigating lithium deposition/dissolution and diffusion at the microelectrode surface	51
A rationale for the rapid extraction of ultra-low-level uranyl ions in simulated bioassays regulated by Mn-dopants over magnetic nanoparticles	51