OOIR: Observatory of International Research

Papers

(The H4-Index of RSC Advances is 92. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)

Article	Citations
Efficient adsorption performance of uranium in wastewater by novel MXene material TiVCT_x and its aerogel composites	593
Correction: From micro/nano structured isotactic polypropylene to a multifunctional low-density nanoporous medium	562
Correction: The influence of bicarbonate concentration and ionic strength on peroxide speciation and overall reactivity towards UO₂	376
Correction: Optical properties and photoactivity of carbon nanodots synthesized from olive solid wastes at different carbonization temperatures	331
Correction: Effects of Ni precursors on the formation of Mg–Fe–Ni intermetallic hydrides, kinetics, and reversibility	324
Correction: Insight into mineralizer modified and tailored scorodite crystal characteristics and leachability for arsenic-rich smelter wastewater stabilization	323
Expression of concern: Impact of some pyrrolidinium ionic liquids on copper dissolution behavior in acidic environment: experimental, morphological and theoretical insights	279
Correction: The influence of electron utilization pathways on photosystem I photochemistry in Synechocystis sp. PCC 6803	258
A silica-supported palladium oxide catalyst (PdO@MCM-41) selectively cleaves ether linkages in lignin model compounds and alkali lignin via intramolecular hydrogen transfer	250
A novel nanodrug for the sensitization of photothermal chemotherapy for breast cancer in vitro	246
Effect of incorporating white pepper (Piper nigrum L.) oleoresin on starch/alginate films	235
In vivo and in silico evaluation of the phytoalexin-eliciting activity in common bean (Phaseolus vulgaris L.) of jasmonoyl-l-isoleucine analogs having a pyrazolidin-3-o	234
Upgrading furfural to bio-fuels using supported molybdenum carbides: study of the support effect	233
Safety evaluation of Plukenetia volubilis seeds: a metabolomic profiling and network toxicology approach	228
An expedient metal-free cascade route to chromonyl diene scaffolds: thermodynamic vs. kinetic control	226
An attempt to prepare sulfonyl analogues of fotemustine: unexpected rearrangement to sulfamate during nitrosation step	221
A rapid construction of 1,3,2-benzodiazaborininones [R–B(aam)] from boronic acids and anthranilamides	218
Diastereoselective C-alkylation of aldimines, derived from chiral α-carbon heteroatom-substituted aldehydes, with triethylborane. Application to the synthesis of benzylisoquinolines	217
Physical insights into the Au growth on the surface of a LaAlO₃/SrTiO₃ heterointerface	204
High thermoelectric performance in metal phosphides MP₂ (M = Co, Rh and Ir): a theoretical prediction from first-principles calculations	201
Correction: Thiophene derivatives as corrosion inhibitors for 2024-T3 aluminum alloy in hydrochloric acid medium	200
Photoactive Zr-aromatic hybrid thin films made by molecular layer deposition	194
Expression of Concern: Construction of a binary S-scheme S-g-C₃N₄/Co-ZF heterojunction with enhanced spatial charge separation for sunlight-driven photocatalytic performance	185
Efficient dispersive solid-phase extraction of methylprednisolone from exhaled breath of COVID-19 patients	185
Correction: Enhanced performance of porous forward osmosis (FO) membrane in the treatment of oily wastewater containing HPAM by the incorporation of palygorskite	182

Electronic effects on the mechanism of the NAD⁺ coenzyme reduction catalysed by a non-organometallic ruthenium(ii) polypyridyl amine complex in the presence of formate	174
One-step fabrication of three-dimensional macropore copolymer-modified polycarbonate array by photo-crosslinking for protein immunoassay	164
Oxa-Michael-based divergent synthesis of artificial glutamate analogs	164
High-efficiency detection of primary amine-based chiral molecules by a facile aldimine condensation reaction	163
Correction: Development of a chromium oxide loaded mesoporous silica as an efficient catalyst for carbon dioxide-free production of ethylene oxide	159
Efficient enzymatic synthesis of chiral 2,3-dihydro-1,4-benzodioxane motif using engineered Candida antarctica lipase B	157
Extracting higher-conductivity designs for solid polymer electrolytes by quantum-inspired annealing	156
Boronic acid-functionalized Fe₃O₄ nanoparticles for activity-preserved enrichment of low-abundance bacteria from real samples	153
Utilization of non-plasticized polymer inclusion membrane for highly selective colorimetric sensor detection of zirconium in environmental samples	151
Copper-promoted oxidative mono- and di-bromination of 8-aminoquinoline amides with HBr and DMSO	145
Synthesis of benzo[b]furans from alkynyl sulfoxides and phenols by the interrupted Pummerer reaction	145
Catalyst characteristics of the composite catalyst of Ru–Sn and Pd for hydrogenation of terephthalic acid	143
Reaction-based energy level modulation of a cyclometalated iridium complex for electrochemiluminescent detection of formaldehyde	142
DRGD-linked charged EKKE dimeric dodecapeptide: pH-based amyloid nanostructures and their application in lead and uranium binding	141
Membraneless ethanol fuel cell Pt–Sn–Re nano active catalyst on a mesoporous carbon support	139
Fluorene- and fluorenone-based molecules as electron-transporting SAMs for photovoltaic devices	139
Uranyl nitrate as a recyclable homogeneous photocatalyst for selective cross-coupling of N-substituted amines and indoles	137
Quantum modeling of dimethoxyl-indaceno dithiophene based acceptors for the development of semiconducting acceptors with outstanding photovoltaic potential	132
The formation mechanism of fibrous metal oxalate prepared by ammonia coordination method	130
Investigating the enhancement of the rate of CO ₂ capture of CaO in the presence of steam through ¹⁸	130
Comments on “Removal of methylene blue dye using nano zerovalent iron, nanoclay and iron impregnated nanoclay – a comparative study” by M. M. Tarekegn, R. M. Balakrishnan, A. M. Hiruy and A. H. Dekebo	126
Fluorescence detection of malachite green and cations (Cr³⁺, Fe³⁺ and Cu²⁺) by a europium-based coordination polymer	123
Towards biotechnological production of bio-based low molecular weight esters: a patent review	122
Structural stability, electronic, optical, and thermoelectric properties of layered perovskite Bi₂LaO₄I	122
Application of 3D printing technology for green synthesis of Fe₂O₃using ABS/TPU/chlorella skeletons for methyl orange removal	122
Intriguing interfacial characteristics of the CS contact with MX₂ (M = Mo, W; X = S, Se, Te) and MXY ((X ≠ Y) = S, Se, Te) monolayers	121
Scalemic myrionsumamide A, tetracyclic skeleton alkaloids from Myrioneuron effusum	120
RNA 2′-OH modification with stable reagents enabled by nucleophilic catalysis	119
Synthesis and antibiotic potential of myxocoumarin-inspired chromene dione analogs	119
Superior nanopatterns via adjustable nanoimprint lithography on aluminum oxide in high-K thin films with ultraviolet curable polymer	117
Development of a cationic polyethyleneimine-poly(lactic-co-glycolic acid) nanoparticle system for enhanced intracellular delivery of biologics	114
Retraction: The structural and luminescence properties of plexcitonic structures based on Ag₂S/l-Cys quantum dots and Au nanorods	114
Cumingianols G and H, new 14,18-cycloapoeuphane triterpenoids from the Taiwan Dysoxylum cumingianum C. DC.	114
Design, synthesis, and in silico studies of new benzofuran–pyrazole hybrids as multi-kinase inhibitors with potential antiproliferative activity	113
A rationale for the rapid extraction of ultra-low-level uranyl ions in simulated bioassays regulated by Mn-dopants over magnetic nanoparticles	112
Developing the half-metallic ferromagnetism in semimetal germanene monolayer: synergistic effects of band gap opening and magnetism engineering	112
A PtPdCoCuNi high-entropy alloy nanocatalyst for the hydrogenation of nitrobenzene	111
Establishing a UHPLC-MS/MS method for evaluation of the influence of stir-frying on the pharmacokinetics of seven compounds in Arctii Fructus	110
MOFabric: an effective and wearable protective garment towards CWA detoxification	110
In situ electrochemical monitoring with an open circuit auxiliary electrode in microbial electrochemical cells treating sediments	109
Application and development of sludge-based materials for environmental pollution remediation: a bibliometric review from 2004 to 2024	109
Lead-free europium and ytterbium perovskites	109
One-pot synthesis of chromenes in the presence of nano-cellulose/Ti^(IV)/Fe₃O₄ as natural-based magnetic nano-catalysts under solvent free conditions	107
Synthesis and mechanism of biological action of morpholinyl-bearing arylsquaramides as small-molecule lysosomal pH modulators	106
Introduction to the RSC Advances themed collection on nano and microscale modifications of biomaterials	104
Effect of defect-healing treatment on layered silicate precursors toward well-defined crosslinked frameworks	104
Salivary SARS-CoV-2 antibody detection using S1-RBD protein-immobilized 3D melt electrowritten poly(ε-caprolactone) scaffolds	104
Synthesis and characterization of novel poly cysteine methacrylate nanoparticles and their morphology and size studies	103
Optimized nano-metal particles filled into carbon nanohorns to achieve high N-doping amount and high porosity for enhanced oxygen evolution reaction	103
Highly sensitive ultra-performance liquid chromatography coupled with triple quadrupole mass spectrometry detection method for levoglucosan based on Na⁺ enhancing its ionization efficiency	101

Ti and Zr complexes bearing guanidine-phenolate ligands: coordination chemistry and polymerization studies	100
Effect of a polymeric compound layer on jetting dynamics produced by bursting bubbles	100
2D materials for nutraceutical delivery and smart packaging: multifunctional, sustainable, and responsive applications	100
Solution-processed nickel oxide passivation on large-area silicon electrodes for efficient photoelectrochemical water splitting	99
Investigating the role of microwave thermal and non-thermal effects on WO₃-graphene oxide composite synthesis	99
Microstructure and corrosion behavior of Al_95−xNi_xY₅ (x = 7,10) glassy ribbons	98
Dual-emission nitrogen-doped carbon dots for ratiometric and smartphone-based detection of levofloxacin	97
A novel LC-MS/MS method for simultaneous estimation of acalabrutinib and its active metabolite acalabrutinib M₂₇ in human plasma and application to a human pharmacokinetic study	96
Simple manual roller pump-driven valve-free microfluidic solution exchange system for urgent bioassay	96
Insights into coloration enhancement of mercerized cotton fabric on reactive dye digital inkjet printing	96
Production and processing of zein nanoparticles as structural colorants	96
Correction: Correction: Influence of Ni content on structural, magnetocaloric and electrical properties in manganite La_0.6Ba_0.2Sr_0.2Mn_1−xNi_x<	96
The mineral manaksite, KNaMnSi₄O₁₀, as a supercapattery-type electrochemical energy storage material	95
Organic dye-loaded reduced titanium dioxide as a broadband saturable absorber for ultrafast fiber lasers	93
Preparation and characterization of attapulgite-supported phase change energy storage materials	92
Atomic-level investigation on the oxidation efficiency and corrosion resistance of lithium enhanced by the addition of two dimensional materials	92
Influence of ITO electrode on the electrochromic performance outcomes of viologen-functionalized polyhedral oligomeric silsesquioxanes	92
Reactions of noble-metal oxides in ionic liquids near room temperature	92