International Journal of Precision Engineering and Manufacturing

Papers
(The TQCC of International Journal of Precision Engineering and Manufacturing is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Dynamic Response Analysis of the Turning Variable Mass Hydrostatic Spindle System94
Analysis of Temperature Stability and Change of Resonant Frequency of a Capacitive MEMS Accelerometer62
Experimental and Numerical Investigations of the Fatigue Life of AA2024 Aluminium Alloy-Based Nanocomposite Reinforced by TiO2 Nanoparticles Under the Effect of Heat Treatment46
Image-Recognition-Based Embedded System for Excavator Bucket Tracking in Construction Sites40
Digital Twin Data-Driven Multi-Disciplinary and Multi-Objective Optimization Framework for Automatic Design of Negative Stiffness Honeycomb36
Milling Tool Condition Monitoring Based on an Integrated Wireless Vibration Sensing Tool Holder32
Prediction of Cutting Force for Different Tools Based on Transfer Learning and Neural Networks30
Moving Object Detection with Single Moving Camera and IMU Sensor using Mask R-CNN Instance Image Segmentation29
Optimized Clavicle Hook Plate Geometry for Average Korean Clavicle–Acromion Dimensions: A Finite Element Analysis Study23
Comparisons of Age-Related Changes in Impact Characteristics Between Healthy Older and Younger Runners23
Fatigue and Tensile Behaviors of High Stiffness Adhesive Bonded and Hybrid Joints with Composite-Steel Dissimilar Materials22
Comparison of Tactile and Optical Measurement Methods Using Precise Geometrical Shape22
Whole Body Vibration Impact Assessment on Dumper Operator Using Computational Learning Technique21
A Dual Difference Method for Identification of the Inherent Spindle Axis Parallelism Errors of Machine Tools21
Design, Analysis and Experimental Investigation of Micro Piezoelectric Vibrational Energy Harvester with Enhanced Power Extraction at Low Frequency21
A High Precision and Fast Alignment Method Based on Binocular Vision21
Non-coupled Finite Element Modelling of Electromagnetic Radial Compaction of Pure Aluminium Powder19
An Investigation of the Properties of 3D Printing Materials According to Additive Manufacturing Conditions Using Ultrasonic Wave19
The Effect of Graphite-Powder-Mixed Kerosene on Tool Wear in Micro ED Milling18
Precise Measurement of Dynamic Ink Spreadability Using High-Speed Camera and Nonlinear Regression18
A Review on Robust Control of Robot Manipulators for Future Manufacturing18
Study on the Mechanism of the Influence of Passenger Load on the Vibration Characteristics of Railway Vehicles Based on Modal Characteristics17
Priority Analysis and Optimization for Accuracy Allocation of Precision Grinding Machine Considering Manufacturing Accuracy and Cost17
Effects of Different Proportion of Mixed Electrolyte and Polarity on Micro-Machining Performances of ECDM Process17
An Integrated Setup for Sequential Hybrid Laser Beam Micromachining (LBMM) and Micro-EDM for Machining Micro-hole Arrays with Automated Tool Localization16
Analytical Modelling of Cutting Force in End-Milling with Minimum Quantity Lubrication16
Mathematical Model to Analyze Coiling Feasibility at Downcoiler in Hot Strip Mill15
Minimizing the Number of Transitions of 3D Printing Nozzles Using a Traveling-Salesman-Problem Optimization Model15
Experimental Study on Step-by-Step Electrical Discharge Machining of Square Blind Holes in TC4 Titanium Alloy15
Contact Load and Stiffness of Four-Point Contact Ball Bearings Under Loading15
Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material15
Development of TPU/MWCNT Composite Bending Sensor15
Evaluating the Stability of Locking Screw on Locking Compression Plate According to Various Screw Insertion Angles14
Development of Wafer Bonding System for High Precision Bonding Alignment14
Modeling and Performance Analysis of Linear Part Feeder System Actuated by Piezoelectric Transducers14
Contact System Method for the Precise Interaction Between Cobots and Mobile Robots in Smart Manufacturing14
Anti-collision Device for the One-Dimensional Scanning Probe Fitted to a Measuring Machine14
Modularized Analysis of Kinematic and Mechanical Error for Planar Linkages Composed of Class 3 and Order 3 Assur Groups14
Influence of Different Dielectrics and Machining Parameters for Electrical Discharge-Assisted Milling of Titanium Alloy13
Process Variable Optimization for Hot-Profiled Rolling of SAE 52100 Steel13
Adaptive Subpixel Edge Detection for Locating the Center of Nut Screw Hole13
Acoustic Emission Monitoring of Grinding-Polishing of Extra-Low Dispersion Lens13
Long-term Performance Analysis of Welded Joints Using Ultrasonic Wire Harness in Addition with Ni(Cu), Ag(Cu) and Sn(Cu) Clads13
Experimental Study of Multidimensional Ultrasonic Vibration-Assisted Milling of SiCp/Al Composites13
High Precision and Low Force Resonant Probe Based on Quartz Tuning Fork13
The Vision-Based Target Recognition, Localization, and Control for Harvesting Robots: A Review13
Characterization of Heat Affected Zone Generation in Laser Processing of Carbon Fiber Reinforced Plastics12
Disturbance Suppression and Contour Following Accuracy Improvement: An Adaptive PI-Type Sliding Mode Nonlinear Extended State Observer Approach12
Data-Driven Methods for Predicting the State of Health, State of Charge, and Remaining Useful Life of Li-Ion Batteries: A Comprehensive Review12
Porous Polymer Microneedles with Superhydrophilic Surface for Rapid Fluid Transport12
Mechanism of Debris Adhesion to Tool Electrode in Electrical Discharge Drilling Process of Micro Deep-Hole Using Deionized Water12
Three-Phase Coil Configurations for the Radial Suspension of a Bearingless Slice Motor12
Crack Guidance Utilizing the Orientation of Additive Manufactured Lattice Structure12
Fabrication and Optimal Design of a Mechanical Piezoelectric Energy Harvester with Re-entrant Honeycomb Substrate for Maximizing Voltage Output12
Three-Dimensional Measurement and Finite-Element Simulation for Tool Wear Estimation in Cutting of Inconel 718 Superalloy12
A Novel Equal Area-Equal Width-Equal Bin Numbers Technique Using Salp Swarm Optimization Algorithm for Maximizing the Success Rate of Ball Bearing Assembly12
Defect Detection in the Winding Layer of CNG Composite-Wound Cylindersvirtue of minimal mechanism is that it allows12
Effects of Cutting Parameters in Fine Milling Processes of Blisk12
Robotic Camera Calibration to Maintain Consistent Percision of 3D Trackers12
Springback Investigation of a Thick-Walled Tube Under Combined Torsion-Bending and Internal Pressure by Using Continuum Damage Mechanics11
Learning Multiple-Gait Quadrupedal Locomotion via Hierarchical Reinforcement Learning11
Analysis of Interaction Effects of Riveting Parameters of CFRP/Al Hybrid Structure11
Hole Diameter Deviation Control Method for Robotic Hole-Making System Based on Presser Foot Action11
Deep Convolution Neural Network to Improve Hand Motion Classification Performance Against Varying Orientation Using Electromyography Signal11
A Performance Evaluation of Precise Micro Turning Process using TOPSIS-GRA-ANN11
Investigation of Moving Load Distribution with the Effect of LDR and LSR on Three-dimensional Fatigue Fracture Behavior of Spur Gear Drive11
Optimization of Zinc Coating Thickness by Unreplicated Factorial Design of Experiments in Hot-Dip Galvanization Process11
A Study on Surface Quality and Mechanical Property Improvement Through Mechanical Surface Treatment of Amorphous Metal11
Realization of Enhanced Mechanical Properties of Solid-State Welded Ti Alloy with Commercial Purity11
Design of a Variable Reference Current Controller for Micro-stepping Motor Based on Vibration and Missing Step Characteristic Data10
Joining Dissimilar Material Pairs by Mechanical Locking Method (MLM)10
Research and Design of Injection Head Clamping Device10
Unsupervised Anomaly Detection Process Using LLE and HDBSCAN by Style-GAN as a Feature Extractor10
Robust Optimal Design of a Six-Bar Linkage-Based Finger Clamping Unit for High Durability10
Investigation of Surface Integrity Up-Milling Magnesium Oxide Particle Reinforced Wood-Based Composite10
Thermographic Inspection of CLP Defects on the Subsurface Based on Binary Image10
Simulation Study on Removal Mechanism of Si3N4 Ceramic in Rotary Ultrasonic Grinding10
Durability Testing and Simulation Analysis of the Tension Spring Assembly of a 20-ton Excavator10
Disturbance Rejection Control Method Based on Variable Damping and Port Controlled Hamiltonian with Dissipation Model for Induction Drive Motor10
Parameter Identification of Equivalent Circuit for Pulsed Electrochemical Machining Based on Experimentally Obtained Current Waveforms10
Macro–Micro Composite Actuator Thrust Optimization Analysis and Experimental Study10
Optimal Design of Multi-linked Knee Joint for Lower Limb Wearable Robot10
Pressure Ulcer Breakout Time Estimation Model for the Wearable Robot Use9
Deep U-NET Based Heating Film Defect Inspection System9
Finite Element and Experimental Analysis of Ultrasonic Vibration Milling of High-Volume Fraction SiCp/Al Composites9
Vibration-Damped Tool Holders in Industrial Robotic Machining Systems9
Effect of Ball End Cutter Tilt Milling on Path Interval of Blade Surface9
A Study on the Impact of Blank Holder Pressure on Forming Pressure and Product Quality in Hydrostatic Forming9
Machining Feature Recognition Using Descriptors with Range Constraints for Mechanical 3D Models9
Process Modelling of an Analytic Control Machine in Virtual Reality Platform9
Biomechanical Role of Nucleotomy in Vibration Characteristics of Human Spine9
Enhancement of In-Position Stability Performance in Magnetic Levitation Fine Stages Through Structural Mode Reinforcement9
Characterization of Circumference and Internal Pressure of a Penis by Using Stretchable Capacitive Sensors and a Penis Dummy for Diagnosing Erectile Dysfunction9
Proposal for a Multiple-DOF Spherical Gear and Investigation of Backlash and Transmitted Efficiency Between Gears9
A Study on Optimum Machinability of NiTi Shape Memory Alloy Via AWJ9
The Application of Uniform Design and Fuzzy Analysis to CNC Machine Tool Leveling Accuracy Adjustment9
Geometric Error Measurement of Rotary Axes on Five-Axis Machine Tools: A Review9
Recent Developments in Finite Element Analysis of the Lumbar Spine9
Approach to Receptance Coupling Substructure Analysis based on Full Receptance Estimation of Sub-assembly Using the Modal Fitting Method9
Strength Prediction FEM Model Development of Welded Steel Joint9
Experimental Measurement and Evaluation of the Noise Generated by Three Transmissions by Synchronous Belts of Type AT10, BAT10 and SFAT108
Research on Control Technology of Variable Curvature Bending Springback Based on Iterative Compensation Method8
A Novel Laser Pulse Output Algorithm for Three-dimensional Complex Surfaces with Adjustable Spot Intervals8
A Novel Approach to a Few Shot Learning Techniques Based on Thermal Error Modeling for Slant Bed CNC Lathe Machine8
Study on Folding Defect Elimination Method of Track Link Forging Based on Preforming Design8
Influence of Counterpart Material on Fretting Wear of FDM Printed Polylactic Acid Plates8
Evaluation of the Reverse Deep Drawing Process to Produce Square Cup of Brass Without Blank-Holder8
Pneumatic Measuring Method for Inclination Angle of the Edge of Inner Ring Groove8
Development of Real-time Grinding Process Monitoring and Analysis System8
An Active Geophone Sensor with Optimized State Variable Filter for Measuring Low-Band Frequencies8
Arc Characteristics and Welding Joints in Pulsed TIG Welding with Different Current Waveforms8
Study on the Formation of the Crater and Modified Layer in EDM Titanium Alloys Based on Fluid–Solid Coupled Temperature Field Model8
Vibration Characteristic Analysis of Lumbar Spine in Human Body: for Pitching and Vertical Directions8
Analysis of Mechanical Properties of Hybrid Lattice Structures Based on Complementary Elastic Modulus Strategy8
Development of a Universal-Purpose Settlement Gripper Using a Flexible Sub-arm and Triggering Mechanism8
Lightweight Design Process Combining Generative Design and Topology Optimization Based on Fusion 360 and ANSYS: A Case Study of a Biped Robot's Arch Component8
Ultrasonic Elliptic Vibration Cutting of Difficult-to-Machine Materials: A Review8
Pattern Classification for Small-Sized Defects Using Multi-Head CNN in Semiconductor Manufacturing8
Prescribed Adaptive Backstepping Control of Nonlinear Systems Preceded by Hysteresis in Piezoelectric Actuators8
Impact of Recoater Method in Stereolithography: A Comparative Analysis of Print Quality and Material Properties8
A Study on Tool Breakage Detection During Milling Process Using LSTM-Autoencoder and Gaussian Mixture Model8
Frictional Characteristics of Tilting Pad Bearings According to Pattern Arrangement on Rough Surface Considering Asperity Contact7
YOLOv4-Based Semiconductor Wafer Notch Detection Using Deep Learning and Image Enhancement Algorithms7
Development of Customized Insole Design Framework Based on Digital Twin7
A Novel Grinding Process on Compacted Graphite Iron Using Cutting Fluid with Nano-solid Lubricant Additives7
Effect of Position of Robotic Gas Metal Arc Welding on Bead Quality and Multi-objective Optimization Through Gray Relational Analysis7
Experimental research on grinding characteristics of AlCoCrFeNi2.1 dual-phase high entropy alloy7
CAD-based View Planning with Globally Consistent Registration for Robotic Inspection7
Advancement of Analytical Model for Hydrophobic Rectangular Pillared Array on Al-Surface and Its Experimental Validation7
Experimental Study on Superplastic Forming for Inconel 718 Alloy Bipolar Plate7
Characterization of Laser Drilling and Parametric Optimization Using Golden Jackal Optimizer7
Autonomous UAV Target Tracking and Safe Landing on a Leveling Mobile Platform7
Prediction of Micro-scale Forces in Dry Grinding Process Through a FEM—ML Hybrid Approach7
A Structured Illumination Microscope with the Combination of Optical Sectioning and Lateral Resolution Enhancement for Precise 3D Industrial Metrology7
Development of a Quality Prediction Algorithm for an Injection Molding Process Considering Cavity Sensor and Vibration Data7
Investigation on Spraying Uniformity in Etching Process of FPCB with 18 μm Line Pitch7
Optimal Design of Gerotor Profile with Lemniscate Lobe Shape for Noise Reduction7
An Incremental Liquid Impact Forming and Simulation Method for T-shaped Tube Based on Cavity Volume Change7
Study on the Influence of Dynamic Characteristics of Servo Valve on Coupling Vibration of Cold Rolling Mill7
Correction to: Thermographic Inspection of CLP Defects on the Subsurface Based on Binary Image7
Plasma Arc Welding of 780CP High Strength Steel Sheet Lap Joint for Tensile Strength of 100% Compared to Base Metal7
Determination of Joint Defects in Copper Tube Induction Heating Brazing Area Using Infrared Thermal Image Based on CNN Algorithm6
Additively Manufactured Lattice Structures and Materials: Present Progress and Future Scope6
Impact Signal Differences Dependent on the Position of Accelerometer Attachment and the Correlation with the Ground Reaction Force during Running6
Optimal Design of Body Profile for Stable Stair Climbing Via Tri-wheels6
A 3D-printed Microcantilever Holder for Atomic Force Microscopes Using a Mounted Microcantilever6
The Effect of Laser Structuring on Hot-Press Joined Metal-Polymer Cross Tension Joints6
Sustained Drug Release from a Microcontainer Fabricated Using a Polydimethylsiloxane Stencil6
Analytical Prediction of Three Dimensional Chatter Stability Considering Multiple Parameters in Milling6
Micro Drilling 3D Printed Cobalt Chromium Molybdenum for Biomedical Applications: An Experimental Study on the Tool Wear and Machinability6
Evaluation of Surface Characteristics with Pre-treatment Polishing Process in Pulsed Laser Polishing AISI 4140 Mold Steel6
Correction: Durability Testing and Simulation Analysis of the Tension Spring Assembly of a 20-ton Excavator6
Effect of Distribution and Content of β-Phase on the Integrity of Microstamping Forming of Pure Titanium Foil6
Wear and Corrosion Resistance of 304SS Coating Using High Speed Laser Cladding6
DC and Analog/RF Performance Evaluation Using Dual Metal Gate Work Function Engineering of Junctionless Cylindrical Gate All Around Si Nanowire MOSFET Using NEGF Approach for Upcoming Sub 5 nm Technol6
Application of Robotic Welding Technology to the Continuity Plate Weld Within a Steel Built-up Box Column in Buildings6
A Geometric Errors Identification Method for the Rotating Axis of Five-Axis Welding Equipment6
Development of a Novel Type of Modularized Fast Tool Servo Devices for Manufacturing Complex Optical Surfaces6
The One/Multi-objective Optimization for Tensile Yield and Impact Strength Responses of Optical PC/PMMA Blends6
Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding6
Development of Plasma Arc Spot Welding Process and Finite Element Method Analysis Model for Predicting Fracture Strength: Part 1—Development of Plasma Arc Spot Welding Process6
Enhanced Pressure Control Using a Disturbance Observer for Active Pneumatic Vibration Isolator (PVI)6
Tool Wear in Longitudinal-Torsional Ultrasonic Vibration Assisted Drilling of CFRP/Ti Stacks and Its Influence on Drilling Quality6
Air-Able: Fabrication and Experiments of Effervescent Fabric Chamber Inflation with Various Shape of Structures and Wearables6
Droplet Transition and Corrosion Resistance of Surfacing Layer with Flux-Core and Solid Twin-Wire Indirect Arc Welding5
Correction: Robust Optimal Design of a Six-Bar Linkage-Based Finger Clamping Unit for High Durability5
Clamping Error Calibration Algorithm of Aero-Engine Blade Surface Polishing5
Study on Variable Parameter Helical Milling of TC4 Titanium Alloy Tube5
A Simple Tunable Achromatic Quarter-Waveplate with the Combination of Wavelength-Dependent Waveplates5
Design and Modeling of Micro-Scale Piezoelectric Vibration Energy Harvester for Charging Pacemaker Battery5
Finite Element Analysis in Ultrasonic Elliptical Vibration Cutting (UEVC) During Micro-Grooving in AISI 10455
Development of Clamp Type-Valve Locking Device to Improve Clamping Force5
Design and Control of a Flexure-Based Dual Stage Piezoelectric Micropositioner5
Intelligent Length Measurement Method of Hot Forgings Combining Sub-pixel Edge Detection and Green Laser Scanning5
An Effective Formability Model of Pearlitic Steel Wires in Multi-stage Drawing Process Based on the Stress-Based Forming Limit Criterion5
Tracking and Stiffness Control Based on Sliding Modes Design for a Wrist-Elbow Rehabilitator5
Study on Ultrasonic Testing of Interface Bonding State of Aluminum Matrix Composites5
Analysis and Optimization of Laying Process Parameters of Carbon Fiber Reinforced Thermoplastic Composites for Additive Manufacturing Using Robot5
Specimen Size Effect on Behavior of Mg–3Al–1Zn Magnesium Alloy in Macro to Micro-scale Deformation5
Enhancing Mechanical Performance of Friction Stir Welded AZ31 Magnesium Alloy with Nano-TiC Reinforcements Using Grey Relational Analysis5
Acoustic Monitoring in the Process of Pulsed Laser Paint Removal5
Development of a TPU/CNT/Cu Composite Conductive Filament with a High CNT Concentration5
Parametric Design Optimization of a Tail Mechanism Based on Tri-Wheels for Curved Spoke-Based Stair-Climbing Robots5
Improvement of the Transient Levitation Response of a Magnetic Levitation System Using Hybrid Fuzzy and Artificial Neural Network Control5
High Precision Machining of a Displacement Sensor for Helicoidal Motions5
Time Delay Compensation of a Robotic Arm based on Multiple Sensors for Indirect Teaching5
Measuring Parametric and Volumetric Errors in a Four-Axis CMM Using a Hole Plate5
Ultrasonic Properties of Multi-material SS420-IN718 Structures Fabricated Using Laser Directed Energy Deposition5
A Topological Mapping Grinding Strategy for Structured Groove Surface with the Wire-Wound Grinding Wheel5
Optical Vibration Sensor Module Based on Beating Principle for Monitoring of Semiconductor Manufacturing Equipment5
Quality-Related Process Monitoring Based on a Bayesian Classifier5
Mathematical Model to Predict the Moduli of Wet-Laid Pulp/Fiber/Resin Composite Materials5
Multi-Response Optimization and Investigations of Al-Steel Lap-Joint Performance Using a Novel MIG Weld-Brazing Technique5
Thrust Force-Based Tool Wear Estimation Using Discrete Wavelet Transformation and Artificial Neural Network in CFRP Drilling5
Artery Wall Viscoelasticity: Measurement, Assessment, and Clinical Implications5
Distal End Force Estimation of Tendon-sheath Mechanism Using a Spring Sheath5
Optimization Control Method of Intelligent Cooling and Lubrication for a Geared Spindle5
Recent Developments and Challenges on Machining of Carbon Fiber Reinforced Polymer Composite Laminates5
Spider Leg Inspired Soft Actuators in Small Robotic Applications: A Brief Review5
Subsidence of Center or Off-Center Posterior Lumbar Interbody Fusion and Transforaminal Lumbar Interbody Fusion Cages5
In-Situ Temperature Monitoring and Feedback Control in the Gas Tungsten Arc Welding Process5
Development of 3D Resonant Elliptical Vibration Transducer for Dual-Frequency Micro-Dimple Surface Texturing5
Proposal of a Short-Body Hydrogen Pressure Vessel to Assess the Burst Performance of Long-Body/Large-Capacity Vessels5
Synchronous Measurement and Verification of Position-Independent Geometric Errors and Position-Dependent Geometric Errors of Rotary Axes on Five-Axis Machine Tools5
Tool Wear Reduction Using Directional Milling Considering Cutting Angle in Carbon fiber Reinforced Plastic Machining5
Minimum Zone Evaluation of Cylindricity Error Based on the Improved Whale Optimization Algorithm5
Interval Island Laser-Scanning Strategy of Ti–6Al–4V Part Additively Manufactured for Anisotropic Stress Reduction5
Influence of the Billet Volume Distribution on Macro Deformation and Microstructure Response in Transitional Region of Ti-Alloy Multi-rib Component Under Isothermal Local Loading5
Platform Supporting Intelligent Human–Machine Interface (HMI) Applications for Smart Machine Tools5
Experimental Study in Micro-drilling Mechanism on Heterogeneous Structure of Thermal Barrier Coated Inconel 718 Superalloy5
Welding Strategy for Medium and Thick-Wall Pipes Based on Three-Line Laser5
0.057547092437744