International Journal of Precision Engineering and Manufacturing

Article	Citations
Recent Advances of Artificial Intelligence in Manufacturing Industrial Sectors: A Review	63
Appropriate Smart Factory for SMEs: Concept, Application and Perspective	40
Review: Scaffold Characteristics, Fabrication Methods, and Biomaterials for the Bone Tissue Engineering	38
Rigid Precision Reducers for Machining Industrial Robots	36
Cutting Parameter Optimization for Reducing Carbon Emissions Using Digital Twin	35
Recent Developments and Challenges on Machining of Carbon Fiber Reinforced Polymer Composite Laminates	33
Additively Manufactured Custom Soft Gripper with Embedded Soft Force Sensors for an Industrial Robot	33
Adaptive Nonsingular Fast Terminal Sliding mode Control of Robotic Manipulator Based Neural Network Approach	32
Strip Crown Prediction in Hot Rolling Process Using Random Forest	26
Investigation on Material Removal Mechanisms in Photocatalysis-Assisted Chemical Mechanical Polishing of 4H–SiC Wafers	25
Predict the Effects of Forming Tool Characteristics on Surface Roughness of Aluminum Foil Components Formed by SPIF Using ANN and SVR	23
A Survey: Flight Mechanism and Mechanical Structure of the UAV	23
Thrust Force-Based Tool Wear Estimation Using Discrete Wavelet Transformation and Artificial Neural Network in CFRP Drilling	20
Impact Analysis of Tolerance and Contact Friction on a RV Reducer using FE Method	20
Development of Hybrid Artificial Neural Network–Particle Swarm Optimization Model and Comparison of Genetic and Particle Swarm Algorithms for Optimization of Machining Fixture Layout	18
Gaidai Multivariate Reliability Method for Energy Harvester Operational Safety, Given Manufacturing Imperfections	17
Fabrication Methods for Microscale 3D Structures on Silicon Carbide	17
Development of Automatic Chatter Suppression System in Parallel Milling by Real-Time Spindle Speed Control with Observer-Based Chatter Monitoring	17
Misalignment Detection of a Rotating Machine Shaft Using a Support Vector Machine Learning Algorithm	16
Prediction of Micro-scale Forces in Dry Grinding Process Through a FEM—ML Hybrid Approach	16
An Energy Harvester Based on a Bistable Origami Mechanism	16
Improved Convolutional Neural Network for Laser Welding Defect Prediction	16
Data-Driven Methods for Predicting the State of Health, State of Charge, and Remaining Useful Life of Li-Ion Batteries: A Comprehensive Review	16
Nozzle Designs in Powder-Based Direct Laser Deposition: A Review	15
Individual Pitch Angle Control of a Variable Speed Wind Turbine Using Adaptive Fractional Order Non-Singular Fast Terminal Sliding Mode Control	14

The Kinematic Calibration of a Drilling Robot with Optimal Measurement Configurations Based on an Improved Multi-objective PSO Algorithm	14
Finite Element Analysis in Ultrasonic Elliptical Vibration Cutting (UEVC) During Micro-Grooving in AISI 1045	14
Machine Learning for Object Recognition in Manufacturing Applications	13
Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material	13
Compound Machining of Tungsten Alloy Aspheric Mould by Oblique-axis Grinding and Magnetorheological Polishing	13
Joinability and Mechanical Properties of Clinched Joints of Different Aluminum Alloys	13
Multi-material Additive Fabrication of a Carbon Nanotube-Based Flexible Tactile Sensor	13
Adaptive Nonsingular Fast Terminal Sliding Mode Impedance Control for Uncertainty Robotic Manipulators	13
Development of 3D Resonant Elliptical Vibration Transducer for Dual-Frequency Micro-Dimple Surface Texturing	13
In-Situ Distortion Prediction in Metal Additive Manufacturing Considering Boundary Conditions	13
Unsupervised Learning for Anomaly Detection of Electric Motors	12
Theoretical Analysis of Straightness Errors in Coordinate Measuring Machines (CMM) with Three Linear Axes	12
Tool Geometry Optimization of a Ball End Mill based on Finite Element Simulation of Machining the Tool Steel-AISI H13 using Grey Relational Method	12
A Review on Robust Control of Robot Manipulators for Future Manufacturing	12
A LQR Neural Network Control Approach for Fast Stabilizing Rotary Inverted Pendulums	12
A Study on Tool Breakage Detection During Milling Process Using LSTM-Autoencoder and Gaussian Mixture Model	12
Structural Design and Optimization of the Crossbeam of a Computer Numerical Controlled Milling-Machine Tool Using Sensitivity Theory and NSGA-II Algorithm	12
Minimizing the Number of Transitions of 3D Printing Nozzles Using a Traveling-Salesman-Problem Optimization Model	12
Additively Manufactured Lattice Structures and Materials: Present Progress and Future Scope	12
Design and Analysis of Conjugated Straight-Line Internal Gear Pairs	12
Influence of Unbalanced Electromagnetic Force and Air Supply Pressure Fluctuation in Air Bearing Spindles on Machining Surface Topography	12
Identifying Abnormal CFRP Holes Using Both Unsupervised and Supervised Learning Techniques on In-Process Force, Current, and Vibration Signals	12
Influence of Different Dielectrics and Machining Parameters for Electrical Discharge-Assisted Milling of Titanium Alloy	12
Autonomous UAV Target Tracking and Safe Landing on a Leveling Mobile Platform	12
Data-Driven Self-sensing Technique for Active Magnetic Bearing	11
Finite Element and Experimental Analysis of Ultrasonic Vibration Milling of High-Volume Fraction SiCp/Al Composites	11
User Intention Based Intuitive Mobile Platform Control: Application to a Patient Transfer Robot	11
Experimental Investigation on CO2 Laser-Assisted Micro-Grinding Characteristics of Al2O3	11
Contact Load and Stiffness of Four-Point Contact Ball Bearings Under Loading	11
Effect of Surface Waviness on the Performances of an Aerostatic Thrust Bearing with Orifice-Type Restrictor	11
The Focused Electrode Ring for Electrohydrodynamic Jet and Printing on Insulated Substrate	11
Precision Analysis of Flatness Measurement Using Laser Tracker	11
In-Process Identification of the Cutting Force Coefficients in Milling based on a Virtual Machining Model	10
Evaluation of Machining Performance for Electrochemical Surface Grinding of Aluminium Based Hybrid MMC	10
Intermittent Embedding of Wire into 3D Prints for Wireless Power Transfer	10
Robust Landing Control of a Quadcopter on a Slanted Surface	10
Effects of Ultrasonic Nanocrystal Surface Modification on Mechanical Properties of AISI D2 Steel	10
Prediction of Tool Tip Dynamics Through Machine Learning and Inverse Receptance Coupling	10
Geometrical Simulation Model for Milling of Carbon Fiber Reinforced Polymers (CFRP)	10
A Dynamic Linearization Modeling of Thermally Induced Error Based on Data-Driven Control for CNC Machine Tools	10
Pattern Classification for Small-Sized Defects Using Multi-Head CNN in Semiconductor Manufacturing	10
Study of Macroscopic Defects of Four-Layer Structure of Ti–6Al–4V During Superplastic Forming/Diffusion Bonding	10
Moving Object Detection with Single Moving Camera and IMU Sensor using Mask R-CNN Instance Image Segmentation	10
LEVO: Mobile Robotic Platform Using Wheel-Mode Switching Primitives	9
Changes in Spatiotemporal Parameters and Lower Limb Coordination During Prosthetic Gait Training in Unilateral Transfemoral Amputees	9
Multi-Response Optimization and Investigations of Al-Steel Lap-Joint Performance Using a Novel MIG Weld-Brazing Technique	9
High-Precision Position Tracking Control of Giant Magnetostrictive Actuators Using Fractional-Order Sliding Mode Control with Inverse Prandtl-Ishlinskii Compensator	9
Analysis of Temperature Stability and Change of Resonant Frequency of a Capacitive MEMS Accelerometer	9
CAD and FEM Modelling of Theoretical Roughness in Diamond Burnishing	9
Fabrication and Application of Gel-Forming CeO2 Fixed Abrasive Tools for Quartz Glass Polishing	9

Model and Optimize the Magnetic Composite Fluid (MCF) Polishing Process with Machine Learning Modeling and Intelligent Optimization Algorithm	9
Design of Polymeric Orthopedic Screws with Variable Stiffness and Multi-Objective Optimization of Injection Molding Process	9
A Model Reconstruction Method of Blade Repair Based on Linear Combination	9
Reposition and Alignment of Cable Connectors Using a Vibration Plate Manipulator for Wire Harness Assembly Tasks	9
Crack Guidance Utilizing the Orientation of Additive Manufactured Lattice Structure	9
Laser Surface Texturing to Realize Micro-grids on DLC Coating: Effect of Marking Speed, Power, and Loop Cycle	9
Error Compensation Through Analysis of Force and Deformation in Non-circular Grinding	9
Additive Manufacturing of Functionally Graded Materials: A Comprehensive Review	8
The Effect of Tool Structure and Milling Parameters on the Milling Quality of CFRP Based on 3D Surface Roughness	8
Studying Crack Generation Mechanism in Single-Crystal Sapphire During Ultra-precision Machining by MD Simulation-Based Slip/Fracture Activation Model	8
Light-Weight Design and Structure Analysis of Automotive Wheel Carrier by Using Finite Element Analysis	8
Kerosene Supply Effect on Performance of Aluminum Nitride Micro-Electrical Discharge Machining	8
Composite Layer Design Using Classical Laminate Theory for High Pressure Hydrogen Vessel (Type 4)	8
Robust Design of a Rope Ascender Based on Geometric Parameters of Traction Sheave	8
Machine Health Assessment Based on an Anomaly Indicator Using a Generative Adversarial Network	8
Study on the Formation of the Crater and Modified Layer in EDM Titanium Alloys Based on Fluid–Solid Coupled Temperature Field Model	8
Morphologies of Cemented Tungsten Carbides Irradiated by Femtosecond Laser with High Pulse Energy for Machining Enhanced Cutting Tools	8
A Nonlinear Friction Identification Method Combining Separable Least Squares Approach and Kinematic Orthogonal Property	8
Multi-Modal Stress Characteristics Under Coupling Effect of Strip and Work Roll	8
Development of a TPU/CNT/Cu Composite Conductive Filament with a High CNT Concentration	8
Analytical Prediction of Three Dimensional Chatter Stability Considering Multiple Parameters in Milling	8
On-position Measurement Method for Position-error Compensation in Machining	8
Analysis of Mixed Lubrication Characteristics of Cycloid Pin-Wheel Transmission	8
Efficient Analysis of CFRP Cutting Force and Chip Formation Based on Cutting Force Models Under Various Cutting Conditions	8
Analysis of Tool Wear by Using a Cutting Bending Moment Model for Milling Processes	8
Theoretical Analysis of Measuring Accuracy of Three Linear Axis CMMs from Position Errors	8
Precision Assembly Simulation of Skin Model Shapes Accounting for Contact Deformation and Geometric Deviations for Statistical Tolerance Analysis Method	8
Research on Machining Deformation of 7050 Aluminum Alloy Aircraft Rib Forging	8
Effects of Pillar-Based Substrate on the Wire Arc Additive Manufacturing Process	8
Artificial Intelligence in the Design of Innovative Metamaterials: A Comprehensive Review	8
Influence of Process Parameters on Formation of Al/Cu Dissimilar Weld Using Ultrasonic Welding	8
Development of Plantar Pressure Distribution Measurement Shoe Insole with Built-in Printed Curved Sensor Structure	8
Comparative Study on Improving the Ball Mill Process Parameters Influencing on the Synthesis of Ultrafine Silica Sand: A Taguchi Coupled Optimization Technique	8
Computational Studies on Mesh Stiffness of Paralleled Helical Beveloid Gear Pair	8
Design of High-Durability Superhydrophobic Microsurface Structures	8
Evaluation of Electrochromic Device Influenced by Various Formulation of Solid Polymer Electrolyte	7
Development of a Quality Prediction Algorithm for an Injection Molding Process Considering Cavity Sensor and Vibration Data	7
Time Delay Compensation of a Robotic Arm based on Multiple Sensors for Indirect Teaching	7
Improved Informed-RRT* Based Path Planning and Trajectory Optimization for Mobile Robots	7
Investigating the Influences of Wet Fiber Laser Cutting Upon the Surface Integrity of Nitinol Cardiovascular Stents	7
Kinematic Comparison of Double Poling Techniques Between National and College Level Cross-Country Skiers Using Wearable Inertial Measurement Unit Sensors	7
Milling Chatter Mitigation with Projection-Based Robust Adaptive Controller and Active Magnetic Bearing	7
Development of Real-time Grinding Process Monitoring and Analysis System	7
Effect of Moving Structure on the Spatial Accuracy and Compensation of the Coordinate Measuring Machine	7
Development of Integrated Multi-Station System to Precisely Detect and Mitigate Surface Damage on Fused Silica Optics	7
Optimization of Zinc Coating Thickness by Unreplicated Factorial Design of Experiments in Hot-Dip Galvanization Process	7
Characterization of Printed Circuit Board Micro-Holes Drilling Process by Accurate Analysis of Drilling Force Signal	7
Parametric Design Optimization of a Tail Mechanism Based on Tri-Wheels for Curved Spoke-Based Stair-Climbing Robots	7
Recent Development of Piezoelectric Fast Tool Servo (FTS) for Precision Machining	7
Microstructure and Mechanical Characteristics of Dissimilar TIG Welded 9% Cr Heat-Resistant Steels Joints	7
Optimization: Drone-Operated Metal Detection Based on Machine Learning and PID Controller	7
Machine Health-Driven Dynamic Scheduling of Hybrid Jobs for Flexible Manufacturing Shop	7
Simulation Study on Removal Mechanism of Si3N4 Ceramic in Rotary Ultrasonic Grinding	7
Investigations on Deposition Geometry and Mechanical Properties of Wire Arc Additive Manufactured Inconel 625	7
The Vision-Based Target Recognition, Localization, and Control for Harvesting Robots: A Review	7
Design of Large-Stroke and High-Resolution Drive System Based on Giant Magnetostrictive Material	7
Adaptive Approaches to Identify the Interface in Low Frequency Vibration-Assisted Drilling of CFRP/Ti6Al4V Stacks	7
An Investigation of the Properties of 3D Printing Materials According to Additive Manufacturing Conditions Using Ultrasonic Wave	7
Balance Control Strategy of Biped Walking Robot SUBO-1 Based on Force-Position Hybrid Control	7
Effect of Support Structures on the Deformation of AlSi10Mg Aircraft Parts Made Using DMLS	6
Energy Absorption of Square Tubes with Perforations in Dynamic Axial Crush	6
Thermographic Inspection of CLP Defects on the Subsurface Based on Binary Image	6
Learning-Based Discrete Hysteresis Classifier Using Wire Tension and Compensator for Flexible Endoscopic Surgery Robots	6
Parameter Optimization of WAAM with Pulsed GMAW for Manufacturing Propeller-Shaped Blade	6
Cooperative Underwater Vehicle-Manipulator Operation Using Redundant Resolution Method	6
Effects of Sampling Rate and Window Length on Motion Recognition Using sEMG Armband Module	6
A Novel Taper Design Method for Face-Milled Spiral Bevel and Hypoid Gears by Completing Process Method	6
Study on Hot Deformation Behavior and Bending Forging Process of 7075 Aluminum Alloy	6
Design and Analysis of Additive Manufactured Flexure Hinge with Large Stroke and High Accuracy	6
A Small Bipedal Trans-Scale Precision Positioning Stage Based on Inertial Stick-Slip Driving	6
Artery Wall Viscoelasticity: Measurement, Assessment, and Clinical Implications	6
Numerical Investigation of Flow Characteristics in a Viscous Damping System with Symmetrical Hydraulic Cylinders	6
Non-resonant 3D Elliptical Vibration Cutting Induced Submicron Grating Coloring	6
LQR Pendulation Reduction Control of Ship-Mounted Crane Based on Improved Grey Wolf Optimization Algorithm	6
A Study of Ultrafast Ablation on ITO Thin Films with Wavelengths of 513 and 1026 nm for High Resolution Patterning	6
Investigation of Microscale Laser Shock Flat Hole Clinching	6
Integrating Virtual Twin and Deep Neural Networks for Efficient and Energy-Aware Robotic Deburring in Industry 4.0	6
Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses	6
An Effective Formability Model of Pearlitic Steel Wires in Multi-stage Drawing Process Based on the Stress-Based Forming Limit Criterion	6
Exploration of Appropriate Tool Material and Lubricant for Elevated Temperature Incremental Forming of Aluminium Alloy	6

Parametric Performance Investigation on Membraneless Microfluidic Paper Fuel Cell with Graphite Composed Pencil Stoke Electrodes	6
Efficient Removal of Milling Burrs by Abrasive Flow	6
Biomechanical Role of Nucleotomy in Vibration Characteristics of Human Spine	5
Investigation on Electrical Enhanced Photocatalysis Polishing of Single-Crystal Silicon Carbide Substrates	5
Measurement of Six-Degree-of-Freedom Absolute Postures Using a Phase-Encoded Pattern Target and a Monocular Vision System	5
The Effect of Graphite-Powder-Mixed Kerosene on Tool Wear in Micro ED Milling	5
Numerical Analysis of Welding Direction and Sequence for Controlling Distortion and Residual Stress in Aluminum Plate-Sleeve Structures	5
Locator Placement Optimization for Minimum Part Positioning Error During Machining Operation Using Genetic Algorithm	5
Methodology for Predicting the Durability of Aged Tire Sidewall Under Actual Driving Conditions	5
Research on Meshing Characteristics of Strain Wave Gearing with Three Different Types of Tooth Profiles	5
Effects of Tool Edge Preparation on Tool Life in Drilling of SAE4144M Steel	5
Evaluation Criterion of Wheeled Mobile Robotic Platforms on Grounds: A Survey	5
Work Coordinate Setup in the Ultra-precision Machine Tool Using Electrical Breakdown	5
Evaluating the Stability of Locking Screw on Locking Compression Plate According to Various Screw Insertion Angles	5
Design and Dynamic Performance Analysis of High-Contact-Ratio Spiral Bevel Gear Based on Ease-off Technology	5
Verification of Rotordynamic Design Using 1/5 Scaled Model Rotor of 270 MW-Class Gas Turbine Center-Tied Rotor	5
A Review of Mobile Robots: Applications and Future Prospect	5
Performance Improvement of a Pressure Sensor Using Fast Median Algorithm	5
A Simplified Anisotropic Yield Function not Requiring Parameter Optimization for Sheet Metals	5
Improving Image Monitoring Performance for Underwater Laser Cutting Using a Deep Neural Network	5
Self-Tuning Control for Articulated Robots Using the Plestan’s Method	5
Development of a Universal-Purpose Settlement Gripper Using a Flexible Sub-arm and Triggering Mechanism	5
Mathematical Model to Predict the Moduli of Wet-Laid Pulp/Fiber/Resin Composite Materials	5
Friction-Assisted Dissimilar Solid State Lap Joining of Aluminum and Copper Pipes	5
The One/Multi-objective Optimization for Tensile Yield and Impact Strength Responses of Optical PC/PMMA Blends	5
Research Progress of Hydrostatic Bearing and Hydrostatic-Hydrodynamic Hybrid Bearing in High-End Computer Numerical Control Machine Equipment	5
Performance of AEB Vehicles in Rear-End and Cut-In Collisions	5
The Significantly Enhanced Mechanical and Tribological Performances of the Dual Plasma Nitrided and PVD Coated Ti6Al4V Alloy	5
Design and Characterization of Flexible Strain Sensors Using Pressure-Sensitive Material with Multi-walled Carbon Nanotubes and Polydimethylsiloxane	5
Disturbance Suppression and Contour Following Accuracy Improvement: An Adaptive PI-Type Sliding Mode Nonlinear Extended State Observer Approach	5
A High Precision and Fast Alignment Method Based on Binocular Vision	5
Tooth Thickness Error Analysis of Straight Beveloid Gear by Inclined Gear Shaping	5
A Thermal–Elastic–Plastic Constitutive Model using the Radial Basis Function Neural Network and Application for an Energy Efficient Warm Forming Process	5
Study on Ultrasonic Testing of Interface Bonding State of Aluminum Matrix Composites	5
Finger Clamping Unit: A Clamping Device with a Large Clamping Range	5
Microscopic Study on the Mechanism of Tool Bond Wear in Cutting Ni–Fe-Cr-Co–Cu Series Nickel-Base Superalloy	5
Prescribed Adaptive Backstepping Control of Nonlinear Systems Preceded by Hysteresis in Piezoelectric Actuators	5
Development of a Rod Gripper for Drones Using Flexible Fingers and Bistable Structures	5
Investigation of Machining Stability Considering Thermal and Rotation Effect: Effectiveness of Impact Excitation for a Rotating Spindle	4
Three-Phase Coil Configurations for the Radial Suspension of a Bearingless Slice Motor	4
Empirical Optimization and Evaluation for Multi-Nozzle Cleaning Device	4
Recent Development of Dry Metal Forming	4
Cost-Effective Calibration of Collaborative Robot Arm with Single Wire Encoder	4
Dual Optical Measurement Probe System for Double-Sided Film Structure	4
Optimizing the Performance of High-Speed Machining on 15CDV6 HSLA Steel in Terms of Green Manufacturing Using Response Surface Methodology and Artificial Neural Network	4
Sustained Drug Release from a Microcontainer Fabricated Using a Polydimethylsiloxane Stencil	4
Enhanced Hydrogen Delayed Fracture of 1.5 GPa Hot Stamping Steel Sheet with Sheared Surface by Double Punching Method	4
Comparative Study of Rapid Ice Investment Casting Vs Rapid Casting Processes of Aluminium Alloy	4
Autonomous System of TMR (Total Mixed Ration) Feed Feeding Robot for Smart Cattle Farm	4
A Dual Difference Method for Identification of the Inherent Spindle Axis Parallelism Errors of Machine Tools	4
Multi-scale Fabrication Techniques of Collagen Hydrogel for Developing Physiological 3D In vitro Barrier Model	4
Correlation Based Analysis of Parameter Change Propagation in Variant Product Design	4
Empirical Study on Characteristics of Angled Spoke-Based Wheels on Granular Media	4
Development of Coupled Torsion Beam Axle Dynamic Model Based on Beam Elements	4
Effects of Hardness on the Sensitivity and Load Capacity of 3D Printed Sensors	4
Dynamic Characteristics of the Multistage Planetary Gear Transmission System Based on a Stochastic Load	4
Comprehensive Optimization of the Electrical Discharge Drilling in Terms of Energy Efficiency and Hole Characteristics	4
The Modelling and Design of a Linear Variable Differential Transformer	4
Fabrication of Short Circuit-Preventing Electrodes with a Self-assembled Monolayer on Flashlight-Sintered Porous Copper Nanofilms	4
Development of a Variable Stiffness Modulating Mechanism Based on Phase-Change Material and a Temperature Control System	4
Biomechanical Effects of Loop Thickness in ACL Graft: A Simulation Study	4
Acoustic Emission Monitoring of Grinding-Polishing of Extra-Low Dispersion Lens	4
Fuzzy Sliding Mode Control on Positioning and Anti-swing for Overhead Crane	4
Study on Electro-Spark Deposition Welding of Ultra-thin Sheet of Ti-6.5Al-1Mo-1 V-2Zr Alloy	4
Cooling Performance of an Additively Manufactured Lattice Structural Conformal Cooling Channel for Hot Stamping	4
Design, Manufacturing and Operational Analysis of Elliptical Gears	4
Low Cost and Simple PMMA Nozzle Fabrication by Laser Cutting and PDMS Curing Bonding	4
Fatigue and Tensile Behaviors of High Stiffness Adhesive Bonded and Hybrid Joints with Composite-Steel Dissimilar Materials	4
Realization of Enhanced Mechanical Properties of Solid-State Welded Ti Alloy with Commercial Purity	4
Microstructure and Performance Study of Al/Cu Laser Welding with Ag Interlayer	4
Tool Wear Reduction Using Directional Milling Considering Cutting Angle in Carbon fiber Reinforced Plastic Machining	4
Calculation of Effect Ratio of 21 Geometric Errors and Detection of Surface Figure Error	4
Tangential Damping Model of Bolted Joint with the Physics-Based Friction Coefficient	4
High Precision Machining of a Displacement Sensor for Helicoidal Motions	4
Grain Growth Behavior and Improved Mathematical Model of a New-Type Superalloy	4
Motion Tracking of Four-Wheeled Mobile Robots in Outdoor Environments Using Bayes’ Filters	4
Study on Rolling Process Analysis and Experiment of Small Cone Angle Spiral Bevel Gear	4
Effects of Notch Radius and Thickness on the Tensile Strength and Fracture Mechanisms of Al6061-T6 Plate Specimens	4
Optimization for Whole Body Reaching Motion Without Singularity	4
Optimization of Stamping Process Parameters Based on Improved GA-BP Neural Network Model	4
A Geometric Errors Identification Method for the Rotating Axis of Five-Axis Welding Equipment	4
Design and Implementation of a Novel Vertical Precision Positioner	4
Evaluation of Surface Characteristics with Pre-treatment Polishing Process in Pulsed Laser Polishing AISI 4140 Mold Steel	4
Multi-Objective Evolutionary Neural Network Optimization of Process Parameters for Double-Stepped Tube Hydroforming	4
Bilateral Gait Asymmetry in Patients with Hallux Valgus using Normalized Cross-Correlation Function	4
Rapid 3D Shape Measurement using Sine Pattern in Phase-Shifting Projection Method	4
Is Coating Oxide on Porous Metal Thin-Film for Low-Temperature Solid Oxide Fuel Cell Cathode a Panacea for Performance Enhancement?	4
A Novel Modified Shaving Die Design for Fabrication with Nearly Zero Die Roll Formations	4
Non-coupled Finite Element Modelling of Electromagnetic Radial Compaction of Pure Aluminium Powder	4
Application of Computationally Advanced 3D Finite Element Simulation for Stress and Strain Analysis of Single and Multi-pass Spinning Processes with Experimental Validation	4
Impact Signal Differences Dependent on the Position of Accelerometer Attachment and the Correlation with the Ground Reaction Force during Running	4
Study on the Impact of Positioning Errors on the Process Performance of Robotic Bonnet Polishing	4
Reduction Characteristics of Welding Deformation According to Cooling Distance in Heat Sink Welding	4
Drift Error Calibration Method Based on Multi-MEMS Gyroscope Data Fusion	4
Robotic Camera Calibration to Maintain Consistent Percision of 3D Trackers	4