Korean Journal of Orthodontics

Papers
(The median citation count of Korean Journal of Orthodontics is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
Complications reported with the use of orthodontic miniscrews: A systematic review27
Full-arch accuracy of five intraoral scanners: In vivo analysis of trueness and precision24
Comparison of dimensional accuracy between direct-printed and thermoformed aligners23
Use of automated artificial intelligence to predict the need for orthodontic extractions19
Miniscrew insertion sites of infrazygomatic crest and mandibular buccal shelf in different vertical craniofacial patterns: A cone-beam computed tomography study18
Mandibular skeletal posterior anatomic limit for molar distalization in patients with Class III malocclusion with different vertical facial patterns18
Deep learning for the classification of cervical maturation degree and pubertal growth spurts: A pilot study17
Innovative customized CAD/CAM nickel-titanium lingual retainer versus standard stainless-steel lingual retainer: A randomized controlled trial17
Micro-computed tomography evaluation of general trends in aligner thickness and gap width after thermoforming procedures involving six commercial clear aligners: Anin vitrostudy16
Effect of extraction treatment on upper airway dimensions in patients with bimaxillary skeletal protrusion relative to their vertical skeletal pattern14
Short-term treatment effects produced by rapid maxillary expansion evaluated with computed tomography: A systematic review with meta-analysis13
Reasons influencing the preferences of prospective patients and orthodontists for different orthodontic appliances13
Treatment of anterior open bites using non-extraction clear aligner therapy in adult patients13
Force changes associated with differential activation of en-masse retraction and/or intrusion with clear aligners12
Incidence and management of condylar resorption after orthognathic surgery: An overview12
Three-dimensional surgical accuracy between virtually planned and actual surgical movements of the maxilla in two-jaw orthognathic surgery12
Evaluation of a multi-stage convolutional neural network-based fully automated landmark identification system using cone-beam computed tomographysynthesized posteroanterior cephalometric images12
Three-dimensional evaluation of the transfer accuracy of a bracket jig fabricated using computer-aided design and manufacturing to the anterior dentition: An in vitro study11
Effect and stability of miniscrew-assisted rapid palatal expansion: A systematic review and meta-analysis10
Differences in mandibular condyle and glenoid fossa morphology in relation to vertical and sagittal skeletal patterns: A cone-beam computed tomography study10
Effectiveness of medical coating materials in decreasing friction between orthodontic brackets and archwires10
Biomechanical considerations for uprighting impacted mandibular molars10
Effect of micro-osteoperforations on external apical root resorption: A randomized controlled trial10
Accuracy of artificial intelligence-assisted landmark identification in serial lateral cephalograms of Class III patients who underwent orthodontic treatment and two-jaw orthognathic surgery10
Effectiveness of low-level laser therapy and chewing gum in reducing orthodontic pain: A randomized controlled trial9
Part II. What drives Korean adults to seek orthodontic treatment: Factors contributing to orthodontic treatment decisions8
Midfacial soft tissue changes after maxillary expansion using micro-implant-supported maxillary skeletal expanders in young adults: A retrospective study8
Remote digital monitoring during the retention phase of orthodontic treatment: A prospective feasibility study8
The effect of different micro-osteoperforation depths on the rate of orthodontic tooth movement: A single-center, single-blind, randomized clinical trial8
Unilateral maxillary central incisor root resorption after orthodontic treatment for Angle Class II, division 1 malocclusion with significant maxillary midline deviation: A possible correlation with r7
Does mini-implant-supported rapid maxillary expansion cause less root resorption than traditional approaches? A micro-computed tomography study7
Proposed parameters of optimal central incisor positioning in orthodontic treatment planning: A systematic review7
Evaluation of growth changes induced by functional appliances in children with Class II malocclusion: Superimposition of lateral cephalograms on stable structures7
Clinical effectiveness of different types of bone-anchored maxillary protraction devices for skeletal Class III malocclusion: Systematic review and network meta-analysis7
Comparison of soft tissue changes between incisor tipping and translation after premolar extraction7
Characterization of facial asymmetry phenotypes in adult patients with skeletal Class III malocclusion using three-dimensional computed tomography and cluster analysis6
Effectiveness of Invisalign® aligners in the treatment of severe gingival recession: A case report6
Which anchorage device is the best during retraction of anterior teeth? An overview of systematic reviews6
Relationship between rotational disc displacement of the temporomandibular joint and the dentoskeletal morphology6
Nonsurgical maxillary expansion in a 60-year-old patient with gingival recession and crowding6
Accuracy of one-step automated orthodontic diagnosis model using a convolutional neural network and lateral cephalogram images with different qualities obtained from nationwide multi-hospitals6
Evaluation of mandibular buccal shelf characteristics in the Colombian population: A cone-beam computed tomography study6
Chewing gum as a non-pharmacological alternative for orthodontic pain relief: A randomized clinical trial using an intention-to-treat analysis6
Construction reproducibility of a composite tooth model composed of an intraoral-scanned crown and a cone-beam computed tomography-scanned root5
Evaluation of the cell viability and antimicrobial effects of orthodontic bands coated with silver or zinc oxide nanoparticles: An in vitro study5
Maxillary protraction using customized mini-plates for anchorage in an adolescent girl with skeletal Class III malocclusion5
Effect of lower facial height and anteroposterior lip position on esthetic preference for Korean silhouette profiles5
Positional changes in the mandibular proximal segment after intraoral vertical ramus osteotomy: Surgery-first approach versus conventional approach5
Prevalence and patterns of tooth agenesis among patients aged 12-22 years: A retrospective study4
Enhancement of bioactivity and osseointegration in Ti-6Al-4V orthodontic mini-screws coated with calcium phosphate on the TiO2 nanotube layer4
Projected lifetime cancer risk from cone-beam computed tomography for orthodontic treatment4
Differences in dentoskeletal and soft tissue changes due to rapid maxillary expansion using a tooth-borne expander between adolescents and adults: A retrospective observational study4
Common dental anomalies in Korean orthodontic patients: An update4
Impact of piezocision on orthodontic tooth movement4
Evaluation of strategic uprighting of the mandibular molars using an orthodontic miniplate and a nickel-titanium reverse curve arch wire: Preliminary cephalometric study4
Comparative evaluation of shear bond strength of orthodontic brackets bonded to three-dimensionally-printed and milled materials after surface treatment and artificial aging4
Cephalometric Predictors of Future need for Orthognathic Surgery in Korean Patients with Unilateral Cleft Lip and Palate Despite Long-term Use of Facemask with Miniplate4
Three-dimensional assessment of nasal changes after maxillary advancement with impaction using stereophotogrammetry4
Effects of the long-term use of maxillary protraction facemasks with skeletal anchorage on pharyngeal airway dimensions in growing patients with cleft lip and palate4
Characterization of dental phenotypes and treatment modalities in Korean patients with Parry–Romberg syndrome4
Evaluation of cephalometric characteristics and skeletal maturation of the cervical vertebrae and hand-wrist in girls with central precocious puberty4
Maxillary space closure using a digital manufactured Mesialslider in a single appointment workflow4
Quantitative cone-beam computed tomography evaluation of hard and soft tissue thicknesses in the midpalatal suture region to facilitate orthodontic mini-implant placement4
Split orthodontic airway plate: An innovation to the utilization method of conventional orthodontic airway plate for neonates with Robin sequence3
Part I. What drives Korean adults to seek orthodontic treatment: Reliability and validity of a measurement instrument for the perception of orthodontic treatment3
Comparison of the effects of horizontal and vertical micro-osteoperforations on the biological response and tooth movement in rabbits3
Comparison of the bite force and occlusal contact area of the deviated and non-deviated sides after intraoral vertical ramus osteotomy in skeletal Class III patients with mandibular asymmetry: Two-yea3
Accurate transfer of bimaxillary orthognathic surgical plans using computer-aided intraoperative navigation3
Orthodontic treatment in a patient with Moebius syndrome: A case report3
Assessment of bone density changes following two-jaw surgery using multidetector computed tomography: A pilot study3
Effect of nicotine on orthodontic tooth movement and bone remodeling in rats3
Surgical approach and orthodontic treatment of mandibular condylar osteochondroma3
Comparison of slot sizes and parallelism of metal brackets manufactured through metal injection molding and computerized numerical control3
Stability of bimaxillary surgery involving intraoral vertical ramus osteotomy with or without presurgical miniscrew-assisted rapid palatal expansion in adult patients with skeletal Class III malocclus3
Effectiveness of miniscrew assisted rapid palatal expansion using cone beam computed tomography: A systematic review and meta-analysis3
Orthodontic treatment with clear aligners for a patient with chronic periodontitis3
Predicting patient experience of Invisalign treatment: An analysis using artificial neural network3
Variation in adhesion of Streptococcus mutans and Porphyromonas gingivalis in saliva-derived biofilms on raw materials of orthodontic brackets2
Accuracy of three-dimensional periodontal ligament models generated using cone-beam computed tomography at different resolutions for the assessment of periodontal bone loss2
Three-dimensional evaluation of the correlation between lip canting and craniofacial planes2
Periodontal parameters in orthodontically tractioned teeth: A systematic review and meta-analysis2
External apical root resorption 6 months after initiation of orthodontic treatment: A randomized clinical trial comparing fixed appliances and orthodontic aligners2
Effectiveness of low-level laser therapy in facilitating maxillary expansion using bone-borne hyrax expander: A randomized clinical trial2
Skeletal and dentoalveolar effects of different types of microimplant-assisted rapid palatal expansion2
Three-dimensional evaluation of the mandibular condyle in adults with various skeletal patterns2
Antifibrotic effects of sulforaphane treatment on gingival elasticity reduces orthodontic relapse after rotational tooth movement in beagle dogs2
Customized maxillary incisor position relative to dentoskeletal and soft tissue patterns in Chinese women: A retrospective study2
Consideration of root position in virtual tooth setup for extraction treatment: A comparative study of simulated and actual treatment results2
Validation of three-dimensional digital model superimpositions based on palatal structures in patients with maximum anterior tooth retraction following premolar extraction2
Three-dimensional evaluation of the pharyngeal airway space in patients with anterior open bite1
Micro-computed tomographic evaluation of the effect of fluoride agents on white spot lesions: An in vitro study1
Artificial neural network model for predicting sex using dental and orthodontic measurements1
Covariance patterns between ramus morphology and the rest of the face: A geometric morphometric study1
Three-dimensional evaluation of mandibular width after mandibular asymmetric setback surgery using sagittal split ramus osteotomy1
Treatment modalities for Korean patients with unilateral hemifacial microsomia according to Pruzansky–Kaban types and growth stages1
Histological analysis on tissues around orthodontically intruded maxillary molars using temporary anchorage devices: A case report1
The global distribution of permanent canine hypodontia: A systematic review1
Differences in positions of cone-beam computed tomography landmarks in patients with skeletal Class III facial asymmetry according to midsagittal planes1
Relationship between vertical components of maxillary molar and craniofacial frame in normal occlusion: cephalometric calibration on the vertical axis of coordinates1
Maxillary alveolar bone evaluation following dentoalveolar expansion with clear aligners in adults: A cone-beam computed tomography study1
Differences in the heritability of craniofacial skeletal and dental characteristics between twin pairs with skeletal Class I and II malocclusions1
Perception of discrepancy in the upper midline position in conjunction with the gingival display according to various occupations in Iran1
Evaluation of accuracy of 3-dimensional printed dental models in reproducing intermaxillary relational measurements: Based on inter-operator differences1
Periodontal ligament proliferation and expressions of bone biomolecules upon orthodontic preloading: Clinical implications for tooth autotransplantation1
A cone-beam computed tomography study on strategic uprighting of mandibular molars using a biocreative reverse curve system1
Associations between body dysmorphic disorder (BDD) with the dental health component of the index of orthodontic treatment need (IOTN-DHC) and other BDD risk factors in orthodontic patients: A prelimi1
Clinical application of maxillary tissue bone-borne expander and biocreative reverse curve system in the orthodontic retreatment of severe anterior open bite with transverse discrepancy: A case report1
Effect of 125 Hz and 150 Hz vibrational frequency electric toothbrushes on the rate of orthodontic tooth movement and prostaglandin E2 levels1
Evaluation of periodontal parameters and gingival crevicular fluid cytokines in children with anterior open bite receiving passive orthodontic treatment with a spur1
Thermo-mechanical properties in bending of a multizone nickel-titanium archwire: A retrieval analysis1
Occlusal deviations in adolescents with idiopathic and congenital scoliosis1
Clinical predictors of potentially impacted canines in low-risk patients: A retrospective study in mixed dentition1
Characterization of phenotypes and predominant skeletodental patterns in pre-adolescent patients with Pierre-Robin sequence1
Comparison of one-jaw and two-jaw orthognathic surgery in patients with skeletal Class III malocclusion using data from 10 multi-centers in Korea: Part I. Demographic and skeletodental characteristics1
Periodontal health status, oral microbiome, white-spot lesions and oral health related to quality of life-clear aligners versus fixed appliances: A systematic review, meta-analysis and meta-regression1
Root proximity of the anchoring miniscrews of orthodontic miniplates in the mandibular incisal area: Cone-beam computed tomographic analysis1
Evaluation of pain experienced by orthodontic patients following elastomeric separator insertion: A cross-sectional study1
Effect of orthodontic bonding with different surface treatments on color stability and translucency of full cubic stabilized zirconia after coffee thermocycling1
0.024948120117188