Materials

Article	Citations
Correction: Krbata et al. Effect of Supercritical Bending on the Mechanical & Tribological Properties of Inconel 625 Welded Using the Cold Metal Transfer Method on a 16Mo3 Steel Pipe. Materials 20	526
Nano-Hybrid Au@LCCs Systems Displaying Anti-Inflammatory Activity	352
Finite Element Analysis of 3D-Printed Gears: Evaluating Mechanical Behaviour Through Numerical Modelling	342
Mechanical Properties of Hybrid PVA–Natural Curaua Fiber Composites	282
La2O3-CeO2-Supported Bimetallic Cu-Ni DRM Catalysts	278
Vacancy and Strain Effects on the Stability and Electronic Properties of 2D-Mg Intercalated GaN	246
Mechanical Performance of Plywood TIE Joints Under Tension and Shear in the WikiHouse Skylark Modular System	236
A Novel Graphite-Based Sorbent for Oil Spill Cleanup	215
Superconducting Properties and Electron Scattering Mechanisms in a Nb Film with a Single Weak-Link Excavated by Focused Ion Beam	215
Fiber-Reinforced Asphalt Mixture Design on Anti-Skid Surfacing for Field Testing High-Speed Vehicles on Pavements	212
Acoustic Emission Monitoring of Progressive Damage of Reinforced Concrete T-Beams under Four-Point Bending	212
Data-Based Statistical Analysis of Laboratory Experiments on Concrete Frost Damage and Its Implications on Service Life Prediction	208
Is Wood a Material? Taking the Size Effect Seriously	206
Hydration and Mechanical Properties of High-Volume Fly Ash Concrete with Nano-Silica and Silica Fume	192
Effects of Na2CO3/Na2SiO3 Ratio and Curing Temperature on the Structure Formation of Alkali-Activated High-Carbon Biomass Fly Ash Pastes	181
Experimental Study on Microstructure and Erosion Mechanisms of Solid Waste Cemented Paste Backfill under the Combined Action of Dry–Wet Cycles and Sulphate Erosion	165
Carbon Nanofibers Grown in CaO for Self-Sensing in Mortar	154
Advanced Stainless Steel—From Making, Shaping, Treating to Products	153
Scalable Graphene–MoS2 Lateral Contacts for High-Performance 2D Electronics	147
A Multilevel Physically Based Model of Recrystallization: Analysis of the Influence of Subgrain Coalescence at Grain Boundaries on the Formation of Recrystallization Nuclei in Metals	142
Evaluation of Setting Times of Concrete Using Electro-Mechanical Impedance Sensing Technique	140
Effects of Hypochlorous Acid and Hydrogen Peroxide Treatment on Bacterial Disinfection Treatments in Implantoplasty Procedures	138
Light Transmission Characteristics and Cytotoxicity within A Dental Composite Color Palette	136
Experimental Study of Slag Changes during the Very Early Stages of Its Alkaline Activation	135
Quasi-Solid-State SiO2 Electrolyte Prepared from Raw Fly Ash for Enhanced Solar Energy Conversion	135

Experimental Analysis of Channel Steel Member under Tension Load with Damage in the Unconnected Legs	132
Enzymatic Modification of Walnut Shell for High-Efficiency Adsorptive Methylene Blue Removal	129
Effects of a Complex Environment on Fatigue and Self-Healing Characterization of Asphalt Composites Containing Rock Asphalt	128
A Simple Method for Estimation of the Scattering Exponent of Nanostructured Glasses	128
Isothermal Hydrogen Reduction of a Lime-Added Bauxite Residue Agglomerate at Elevated Temperatures for Iron and Alumina Recovery	128
Research on the Modification Process of Jute Fiber as a Strengthening Material for the Structure of Solidification Substrate	125
Predicting the Gas Permeability of Sustainable Cement Mortar Containing Internal Cracks by Combining Physical Experiments and Hybrid Ensemble Artificial Intelligence Algorithms	125
Effects of Steel Slag Powder Content and Curing Condition on the Performance of Alkali-Activated Materials Based UHPC Matrix	123
Self-Cleaning Biomimetic Surfaces—The Effect of Microstructure and Hydrophobicity on Conidia Repellence	122
Physicochemical Properties of Hematite Nanoparticles Obtained via Thermogravimetric Conversion of Biosynthesized Nanomaghemite	120
Microwave Heating as an Innovative Road Maintenance Technology: Aging Effect on Binder and Feasibility Evaluation	120
The Effect of Commercially Available Desensitizers on Bond Strength Following Cementation of Zirconia Crowns Using Self-Adhesive Resin Cement—An In Vitro Study	120
Mechanical and Environmental Properties of Cemented Paste Backfill Prepared with Bayer Red Mud as an Alkali-Activator Substitute	119
Fastening in Rock Mass—Structural Design of Shallow Embedded Anchors in Inhomogeneous Substrate	116
Structural, Electrical and Corrosion Properties of Bulk Ti–Cu Alloys Produced by Mechanical Alloying and Powder Metallurgy	115
CO2-Accelerated Carbonation Modification for Recycled Coarse Aggregate with Various Original Concrete Strengths and Coarse Aggregate Sizes	114
Rutting Behavior of Dual-Layer Asphalt Pavements Subjected to Variable Temperature	112
Repeated Load Triaxial Testing of Recycled Excavation Materials Blended with Recycled Phyllite Materials	111
Surface Morphology and Spectroscopic Features of Homoepitaxial Diamond Films Prepared by MWPACVD at High CH4 Concentrations	111
Physicochemical Characterization of Cherry Pits-Derived Biochar	111
Austenite Growth Behavior and Prediction Modeling of Ti Microalloyed Steel	108
Effect of the Severe Plastic Deformation on the Corrosion Resistance of a Tantalum–Tungsten Alloy	106
Mechanical Properties and Mechanism Analysis of Graphite Tailings Environment-Friendly Concrete	105
Reinforcement Effect of Different Fibers on Asphalt Mastic	105
Residual Chlorella-Based Cellulose Nanofibers and Their Quaternization Modification and Efficient Anionic Dye Adsorption	99
Experimental Study of Mechanical Properties and Theoretical Models for Recycled Fine and Coarse Aggregate Concrete with Steel Fibers	99
Flexural Strength and Surface Properties of 3D-Printed Denture Base Resins—Effect of Build Angle, Layer Thickness and Aging	97
Theoretical and Experimental Analyses on the Sound Absorption Coefficient of Rice and Buckwheat Husks Based on Micro-CT Scan Data	96
Effects of Preparation Procedures and Porosity on Thermoelectric Bulk Samples of Cu2SnS3 (CTS)	95
Fault Critical Point Prediction Method of Nuclear Gate Valve with Small Samples Based on Characteristic Analysis of Operation	95
High-Performance Concrete from Rubber and Shell Waste Materials: Experimental and Computational Analysis	94
Enhanced Mechanical Properties of Yellow ZrN Ceramic with Addition of Solid Solution of TiN	94
Process of Pure Copper Fabricated by Selective Laser Melting (SLM) Technology under Moderate Laser Power with Re-Melting Strategy	94
Compressive Strength and Chloride Resistance of Slag/Metakaolin-Based Ultra-High-Performance Geopolymer Concrete	94
The Influence of Low-Temperature Food Waste Biochars on Anaerobic Digestion of Food Waste	94
Performance of Different Concrete Types Exposed to Elevated Temperatures: A Review	94
The Influence of Selected Laser Engraving Parameters on Surface Conditions of Hybrid Metal Matrix Composites	93
Analysis and Minimization of Race Tracking in the Resin-Transfer-Molding Process by Monte Carlo Simulation	93
Study of Concrete under Combined Action of Aggressive Environment and Long-Term Loading	92
Mechanical Properties and Microstructure of TIG and ATIG Welded 316L Austenitic Stainless Steel with Multi-Components Flux Optimization Using Mixing Design Method and Particle Swarm Optimization (PSO)	92
Strength Characteristics of Historical Mortars—Experimental Study Using the Double Punch Method	91
Synthesis, Crystal Structure, and Optical and Magnetic Properties of the New Quaternary Erbium Telluride EuErCuTe3: Experiment and Calculation	91
Multifunctional BiOI/SiO2/Fe3O4@n-Docosane Phase-Change Microcapsules for Waste Heat Recovery and Wastewater Treatment	91
Applications of Light-Based 3D Bioprinting and Photoactive Biomaterials for Tissue Engineering	90
Analysis of Carbon Formation on Machined Leather Specimen Using FTIR Technique in Laser Diode Assisted Cutting Process	90
Characterization of Magnetic Biochar Modified Using the One-Step and Electrochemical Methods and Its Impact on Phosphate Adsorption	90
Investigating the Mechanical and Durability Characteristics of Fly Ash Foam Concrete	89
Biomimetic Superhydrophobic Surfaces: From Nature to Application	89
Shape Memory Alloys Applied to Automotive Adaptive Aerodynamics	89
In Vitro Degradation Studies of 3D-Printed Thermoplastic Polyurethane for the Design of Vascular Implant	88

Performance of Capsules in Self-Healing Cementitious Material	88
Research Progress on Laser Powder Bed Fusion Additive Manufacturing of Zinc Alloys	88
Side Oscillation Milling: Modeling, Analysis, and Compensation of Cutting Forces Through Feed Optimization	88
AlOOH-Coated Glass Fiber-Reinforced Composites for Pipeline Rehabilitation: Enhancement of Interfacial Adhesion and Durability	87
A Sustainable Banana Peel Activated Carbon for Removing Pharmaceutical Pollutants from Different Waters: Production, Characterization, and Application	87
Optimization of REBCO Tapes through Division and Striation for Use in Superconducting Cables with Low AC Losses	86
Unraveling Anomalous Eutectic Formation in Ni-Sn Alloys During Directional Solidification with Transition Variable Speed	86
Potential of Fe-Mn-Al-Ni Shape Memory Alloys for Internal Prestressing of Ultra-High Performance Concrete	85
Optimizing the Pore Structure of Lotus-Type Porous Copper Fabricated by Continuous Casting	85
Preparation and Oil Adsorption of Cellulose-graft-poly(butyl acrylate-N,N′-methylene Bisacrylamide)	84
Enhancing the Mechanical Properties of AM60B Magnesium Alloys through Graphene Addition: Characterization and Regression Analysis	84
Effect of Welding Current on Corrosion Resistance of Heat-Affected Zones of HDR Duplex Stainless Steel	83
Porous Lithium Disilicate Glass–Ceramics Prepared by Cold Sintering Process Associated with Post-Annealing Technique	83
Evaluation of the Effects of Surface Treatment Methods on the Properties of Coral Aggregate and Concrete	83
Effect of Re-Recycling on Rheology and Microstructure of Asphalt Binder	82
Electrochemical and Structural Characterization of Lanthanum-Doped Hydroxyapatite: A Promising Material for Sensing Applications	82
Characterization Studies on Graphene-Aluminium Nano Composites for Aerospace Launch Vehicle External Fuel Tank Structural Application	82
Selected Properties of Single and Multi-Layered Particleboards with the Structure Modified by Fibers Implication	82
Influence of Fibre Orientation on the Slotting Quality of CFRP Composites Using the Multi-Tooth Mill	81
An Overview of Biopolymer-Based Graphene Nanocomposites for Biotechnological Applications	81
Optimization of Spark Plasma Sintering Technology by Taguchi Method in the Production of a Wide Range of Materials: Review	81
Evaluation of Tooth Movement Accuracy with Aligners: A Prospective Study	81
The Retention Effect of Resin-Based Desensitizing Agents on Hypersensitivity—A Randomized Controlled Trial	80
Centrifugal Atomization of Glass-Forming Alloy Al86Ni8Y4.5La1.5	80
Optimal Limestone Content on Hydration Properties of Ordinary Portland Cement with 5% Ground Granulated Blast-Furnace Slag	80
Development of a Computational Model of the Mechanical Behavior of the L4–L5 Lumbar Spine: Application to Disc Degeneration	79
Effect of Waste PET Fiber on the Mechanical Properties and Chloride Ion Penetration of Emergency Repair Concrete for Road Pavement	79
Application of Laser-Induced Breakdown Spectroscopy for Depth Profiling of Multilayer and Graded Materials	78
Research Progress and Clinical Application of All-Ceramic Micro-Veneer	78
Impact of the Synthetic Strategy on the Structure and Availability of Active Sites in Bifunctional Mesoporous Organic–Inorganic Hybrids	77
Evaluation of CNTs and SiC Whiskers Effect on the Rheology and Mechanical Performance of Metakaolin-Based Geopolymers	77
Effect of PVA Fiber on the Mechanical Properties of Seawater Coral Sand Engineered Cementitious Composites	77
Flexural Strength of Concrete Beam Reinforced with CFRP Bars: A Review	76
Magnetic States and Electronic Properties of Manganese-Based Intermetallic Compounds Mn2YAl and Mn3Z (Y = V, Cr, Fe, Co, Ni; Z = Al, Ge, Sn, Si, Pt)	76
Molecular Dynamics Simulation of Ti Metal Cutting Using a TiN:Ag Self-Lubricating Coated Tool	76
Acoustic Metamaterials for Low-Frequency Noise Reduction Based on Parallel Connection of Multiple Spiral Chambers	75
Microstructure and Mechanical Properties of Magnesium Matrix Composites Reinforced by In Situ Reduced Graphene Oxide	74
Multi-Response Optimization of Al2O3 Nanopowder-Mixed Wire Electrical Discharge Machining Process Parameters of Nitinol Shape Memory Alloy	74
Interpretable Machine Learning for Prediction of Post-Fire Self-Healing of Concrete	73
Numerical Simulation of the Effect of Freeze-Thaw Cycles on the Axial Compression Strength of Rubber Concrete	73
Effects of S Doping and Oxygen Vacancy on the Physical Properties of Rutile TiO2 for Photocatalysis Applications Based on Density Functional Theory Study	73
From Seaweeds to Hydrogels: Recent Progress in Kappa-2 Carrageenans	73
The Impact of Selected Eutectic Solvents on the Volatile Composition of Citrus lemon Essential Oil	73
Performance Improvement of Quantum Dot Light-Emitting Diodes Using a ZnMgO Electron Transport Layer with a Core/Shell Structure	72
Fatigue Crack Monitoring Method Based on the Lamb Wave Damage Index	72
A 3D-Printed Crown Integrated with 3D-Printed Orthodontic Brackets: A Novel One-Unit Printing Technique	72
In Vitro Comparison of Internal and Marginal Adaptation between Printed and Milled Onlays	71
Creep Life Prediction of 10CrMo9–10 Steel by Larson–Miller Model	71
Predicting the Mechanical Properties of RCA-Based Concrete Using Supervised Machine Learning Algorithms	71
Utilization of Construction Waste Recycled Powder as Filler in Asphalt Concrete	71
Antibacterial Efficacy of Cold-Sprayed Copper Coatings against Gram-Positive Staphylococcus aureus and Gram-Negative Escherichia coli	71
Mechanical Properties Variation in Wood—Plastic Composites with a Mixed Wood Fiber Size	71
Scientometric Review for Research Patterns on Additive Manufacturing of Lattice Structures	71
Removal of Stair-Step Effects in Binder Jetting Additive Manufacturing Using Grayscale and Dithering-Based Droplet Distribution	70
Adsorption Behavior and Mechanism of Cesium Ions in Low-Concentration Brine Using Ammonium Molybdophosphate–Zirconium Phosphate on Polyurethane Sponge	70
Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting	70
Study on Mechanism of Mechanical Property Enhancement of Expansive Soil by Alkali-Activated Slag	70
Changes in the Laser-Processed Ti6Al4V Titanium Alloy Surface Observed by Using Raman Spectroscopy	70
The Flexural Strength Prediction of Carbon Fiber/Epoxy Composite Using Artificial Neural Network Approach	70
Use of Alkaline-Activated Energy Waste Raw Materials in Geopolymer Concrete	69
A State-Based Peridynamic Flexural Fatigue Model for Contact and Bending Conditions	69
Optimization of CMT Characteristic Parameters for Swing Arc Additive Manufacturing of AZ91 Magnesium Alloy Based on Process Stability Analysis	69
Ionic Liquid Crystals as Chromogenic Materials	69
Raman Study of 532-Nanometer Laser-Induced Degradation of Red Lead	68
Investigation of Structural, Elastic and Magnetic Properties of CoCr2−xZrxO4 Nanoparticles	68
The Influence of Thermomechanical Conditions on the Hot Ductility of Continuously Cast Microalloyed Steels	68
Simplified Mechanistic Aging Model for Lithium Ion Batteries in Large-Scale Applications	68
Mechanical Properties of the New Generation RACE EVO and R-Motion Nickel–Titanium Instruments	68
Investigation of Photon Radiation Attenuation Capability of Different Clay Materials	68
Selective Laser Melting and Mechanical Properties of Stainless Steels	68
Preparation and Characterization of Porous Poly(Lactic Acid)/Poly(Butylene Adipate-Co-Terephthalate) (PLA/PBAT) Scaffold with Polydopamine-Assisted Biomineralization for Bone Regeneration	67
Materials Design and Structural Health Monitoring of Horizontal Axis Offshore Wind Turbines: A State-of-the-Art Review	67
Finite Element Analysis and Fatigue Test of INTEGRA Dental Implant System	67
Effect of Abrasive Grain Size on the Abrasion Volume Loss of Subfossil and Recent Oak Wood in Three Characteristic Sections	67
Palladium/Graphene Oxide Nanocomposite for Hydrogen Gas Sensing Applications Based on Tapered Optical Fiber	67
A View on the Synthesis and Characterization of Porous Microspheres Containing Pyrrolidone Units	67
Utilization of a 3D Printed Orthodontic Distalizer for Tooth-Borne Hybrid Treatment in Class II Unilateral Malocclusions	67
Numerical Investigation on Effect of Chamfering on Mechanical Behaviors in Continuous Network Composite	66
Removal Mechanism and Electrochemical Milling of (TiB+TiC)/TC4 Composites	66
Investigation on Mechanism of Microstructure Evolution during Multi-Process Hot Forming of GH4169 Superalloy Forging	66

Effective Carbon Dioxide Mitigation and Improvement of Compost Nutrients with the Use of Composts’ Biochar	66
A Critical Review of Existing Test-Methods for External Sulfate Attack	66
Shear Bond Strength Between Artificial Teeth and Denture Base Resins Fabricated by Conventional, Milled, and 3D-Printed Workflows: An In Vitro Study	66
Antimicrobial TiN-Ag Coatings in Leather Insole for Diabetic Foot	65
Polarization Independent Metamaterial Absorber with Anti-Reflection Coating Nanoarchitectonics for Visible and Infrared Window Applications	65
Deformation and Cracking Resistance of MgO-Incorporated Cementitious Material: A Review	65
Luminescence Properties and Energy Transfer of Eu3+, Bi3+ Co-Doped LuVO4 Films Modified with Pluronic F-127 Obtained by Sol–Gel	65
Carbon Quantum Dots-Doped Ni3Se4/Co9Se8/Fe3O4 Multilayer Nanosheets Prepared Using the One-Step Solvothermal Method to Boost Electrocatalytic Oxygen Evolution	65
Assessment of Polymer Concrete Sample Geometry Effect on Ultrasonic Wave Velocity and Spectral Characteristics	65
Color Conversion Light-Emitting Diodes Based on Carbon Dots: A Review	65
Hydrogen Storage Performance of Mg/MgH2 and Its Improvement Measures: Research Progress and Trends	65
Experimental Study on Impact Performance of Basalt-Polypropylene Fiber Reinforced High-Performance Concrete	65
Wetting Transition from Wenzel to Cassie States: Thermodynamic Analysis	64
Shoulder Damage Model and Its Application for Single Point Diamond Machining of ZnSe Crystal	64
Accurate Flow Characterization of A6082 for Precision Simulation of a Hot Metal Forming Process	63
Application of Mesoporous Silicas for Adsorption of Organic and Inorganic Pollutants from Rainwater	63
Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys	63
Hot Formability Study of Cr5 Alloy Steel by Integration of FEM and 3D Processing Maps	63
Influence of Beam Figure on Porosity of Electron Beam Welded Thin-Walled Aluminum Plates	63
Ru Single Atoms on One-Dimensional CF@g-C3N4 Hierarchy as Highly Stable Catalysts for Aqueous Levulinic Acid Hydrogenation	63
Joining Strategies for Double-Sided Self-Pierce Riveting	63
Multistage Tool Path Optimisation of Single-Point Incremental Forming Process	63
Nano-Innovations in Cancer Therapy: The Unparalleled Potential of MXene Conjugates	63
Microwave-Prepared Quantum Dots and Their Potential Applications as Adsorbents and Chemosensors	63
Comparative Study of the Magnetic Behavior of FINEMET Thin Magnetic Wires: Glass-Coated, Glass-Removed, and Cold-Drawn	62
Morphology and Structure of TiO2 Nanotube/Carbon Nanostructure Coatings on Titanium Surfaces for Potential Biomedical Application	62
Design of Tool Shape and Evaluation of Deformation Behavior by Digital Image Correlation Method in V-Bending of Sheet Metal Using Plastic Tools Manufactured by 3D Printer	62
Microstructures and Properties of NbC-Reinforced Ni-Based Coatings Synthesized In Situ by Ultrasonic Vibration-Assisted Laser Cladding	62
Ordered Mesoporous Silica Prepared with Biodegradable Gemini Surfactants as Templates for Environmental Applications	61
A Review of an Investigation of the Ultrafast Laser Processing of Brittle and Hard Materials	61
On the Influence of Welding Parameters and Their Interdependence During Robotic Continuous Ultrasonic Welding of Carbon Fibre Reinforced Thermoplastics	61
Amine Plasma-Polymerization of 3D Polycaprolactone/β-Tricalcium Phosphate Scaffold to Improving Osteogenic Differentiation In Vitro	61
Metabolically Doping of 3D Diatomaceous Biosilica with Titanium	60
Corrosion Resistance of MgO and Cr2O3-Based Refractory Raw Materials to PbO-Rich Cu Slag Determined by Hot-Stage Microscopy and Pellet Corrosion Test	60
Stripe Noise Removal in Blazed Grating Generation for Electrically Tunable Beam Deflector	60
A Novel Measurement Approach to Experimentally Determine the Thermomechanical Properties of a Gas Foil Bearing Using a Specialized Sensing Foil Made of Inconel Alloy	60
Bismuth−Antimony Alloy Embedded in Carbon Matrix for Ultra-Stable Sodium Storage	60
Experimental Study on the Strength and Durability of Manufactured Sand HPC in the Dalian Bay Undersea Immersed Tube Tunnel and Its Engineering Application	60
Antibacterial Properties of PMMA/ZnO(NanoAg) Coatings for Dental Implant Abutments	60
Study on the Strengthening Mechanism of Rare Earth Ce in Magnesium Alloys, Based on First-Principle Calculations and Electronegativity Theory	60
Nanoscale and Tensile-Like Properties by an Instrumented Indentation Test on PBF-LB SS 316L Steel	60
Review of Cutting Temperature Measurement Methods	60
Microwave Electrodynamic Study on Antiferroelectric Materials in a Wide Temperature Range	60
Factors Influencing the Thermo-Hydro-Mechanical Behavior of Unstabilized Rammed Earth Walls	59
Application of the J-Integral and Digital Image Correlation (DIC) to Determination of Multiple Crack Propagation Law of UHPC under Flexural Cyclic Loading	59
Magnetization Processes in Metallic Glass Based on Iron of FeSiB Type	59
Sub-Surface Analysis of Grinding Burns with Barkhausen Noise Measurements	59
Synthesis of Nitro- and Acetyl Derivatives of 3,7,10-Trioxo-2,4,6,8,9,11-hexaaza[3.3.3]propellane	59
Nanoarchitectonics of Spherical Nucleic Acids with Biodegradable Polymer Cores: Synthesis and Evaluation	59
Worm Gear Drives with Improved Kinematic Accuracy	58
Evaluation of Functional Features of Lignocellulosic Particle Composites Containing Biopolymer Binders	58
Fatigue Behavior of an AM50 Die-Casting Alloy Anodized by Plasma Electrolytic Oxidation	58
Roles of Low Temperature Sputtered Indium Tin Oxide for Solar Photovoltaic Technology	58
Study on Strength, Water Stability, Shrinkage, and Microstructure of CFB Slag Modified Cement Stabilized Clay	58
Internal Abiotic Components That Influence the Development of Biocorrosion on ETICS Plasters	58
Microstructure and Its Influence on the Welding Quality of 6063 Aluminum Alloy Porthole Die Extrusion	58
Study of the Mechanical, Sound Absorption and Thermal Properties of Cellular Rubber Composites Filled with a Silica Nanofiller	58
Validation of the Manufacturing Methodology of Prestressed Fiber-Reinforced Polymer Concrete by the Variation of Process Parameters	58
Analytical Modeling of Debonding Mechanism for Long and Short Bond Lengths in Direct Shear Tests Accounting for Residual Strength	58
Development and Experimental Validation of Real Fluid Models for CFD Calculation of ORC and Steam Turbine Flows	58
The Impacts of Surface Microchannels on the Transport Properties of Porous Fibrous Media Using Stochastic Pore Network Modeling	58
Simultaneously Enhanced Potential Gradient and Nonlinearity of ZnO Varistor Ceramics by MnO Doping with Nano-Sized ZnO Powders	58
Investigations on the Influence of Collagen Type on Physicochemical Properties of PVP/PVA Composites Enriched with Hydroxyapatite Developed for Biomedical Applications	58
Remarkable Temperature Sensitivity of Partially Carbonized Carbon Fibers with Different Microstructures and Compositions	57
The Role of Blood Clot in Guided Bone Regeneration: Biological Considerations and Clinical Applications with Titanium Foil	57
Electron Screening in Deuteron–Deuteron Reactions on a Zr Target with Oxygen and Carbon Contamination	57
Transition Zone Enhancement with Waste Limestone Powder as a Reason for Concrete Compressive Strength Increase	57
Alternative Methods of the Largest Lyapunov Exponent Estimation with Applications to the Stability Analyses Based on the Dynamical Maps—Introduction to the Method	57
Tensile Test Coupled with an EBSD Study of a GH4169 Ring Rolled Product	57
Durability of Concrete with Superabsorbent Polymer (SAP) Assessed Using Depth of Carbonation and NDT Ultrasonic Methods	57
Experimental Study of HFE 7000 Refrigerant Condensation in Horizontal Pipe Minichannels	57
Crystal Plasticity Finite Element Simulation of Grain Evolution Behavior in Aluminum Alloy Rolling	57
He-ion Irradiation Effects on the Microstructures and Mechanical Properties of the Ti-Zr-Hf-V-Ta Low-Activation High-Entropy Alloys	57
Effect of Deep Cryogenic Treatment on Wear and Galling Properties of High-Speed Steels	57
Silicon Carbide: Material Growth, Device Processing, and Applications	56
Influence of Scanning Speed on the Microstructure and Wear Resistance of Laser Alloying Coatings on Ti-6Al-4V Substrate	56
X-ray Fluorescence Analysis of Pigments in Gothic Frescoes, Coats of Arms, and Polychromy on Sculptures on the Triforium in St. Vitus Cathedral on the Territory of the Czech Kingdom in the 14th Centur	56
Nanoswimmers Based on Capped Janus Nanospheres	56
Elemental Design of Alkali-Activated Materials with Solid Wastes Using Machine Learning	56
Impact of Annealing in Various Atmospheres on Characteristics of Tin-Doped Indium Oxide Layers towards Thermoelectric Applications	56
Polyethyleneimine-Based Lipopolyplexes as Carriers in Anticancer Gene Therapies	56
Mechanical and Acoustic Properties of Alloys Used for Musical Instruments	56
Vibrational Analysis of Composite Conical-Cylindrical Shells with Functionally Graded Coatings in Thermal Environments	56
Opportunities Offered by Graphene Nanoparticles for MicroRNAs Delivery for Amyotrophic Lateral Sclerosis Treatment	56
Investigation of the Thermodynamic Transformation and Rare Earth Microalloying of a Medium Carbon-Medium Alloy Steel for Large Ball Mill Liners	56
Milling of Three Types of Thin-Walled Elements Made of Polymer Composite and Titanium and Aluminum Alloys Used in the Aviation Industry	56
Numerical and Experimental Analysis of the Rotational Stiffness of a Timber Semi-Rigid Dowel-Type Connection	55
Young’s Modulus and Vickers Hardness of the Hydroxyapatite Bioceramics with a Small Amount of the Multi-Walled Carbon Nanotubes	55
Development of a Methodology for the Quality Management of Duplex Stainless Steels	55
Experimental Study of Energy Evolution at a Discontinuity in Rock under Cyclic Loading and Unloading	55
Kinetics of Ordering and Decomposition in Ti-Al-X (X = Si, Zr) Alloys: Monte Carlo Modeling	55
Production of Mesoporous Magnetic Carbon Materials from Oily Sludge by Combining Thermal Activation and Post-Washing	55
A Modified Two-Relaxation Thermoelastic Model for a Thermal Shock of Rotating Infinite Medium	54
Enhanced High−Temperature Wear Performance of H13 Steel through TiC Incorporation by Laser Metal Deposition	54
Active Vibration Control of Composite Cantilever Beams	54