Materials

Article	Citations
A State-Based Peridynamic Flexural Fatigue Model for Contact and Bending Conditions	406
Numerical Investigation on Effect of Chamfering on Mechanical Behaviors in Continuous Network Composite	374
Crack Arrest Effect of FeMnNiSi-Inconel625-Ni60 Laminated Structure Prepared by Laser Cladding Additive Manufacturing	318
Evaluating Optical Properties of Mixed-Phase 2D MoSe2/Poly(vinyl alcohol) Nanocomposite Film	297
Mechanical Homogenisation of TPMS Architectures: A Comparison Between Finite Element and Mechanics of Structure Genome Approaches	271
New Calamitic Mesogens Exhibiting Aggregation-Induced Emission (AIE)	257
Prediction of the Sound Absorption Coefficient of Three-Layer Aluminum Foam by Hybrid Neural Network Optimization Algorithm	231
Compressive Strength-Based Classification of Eco-Friendly Concretes Using Machine Learning Models	217
Influence of Sintering Process on Mechanical and Tribological Properties of 3D-Mesh-Structure-Reinforced Cu-Based Friction Materials	210
Optimizing the Pore Structure of Lotus-Type Porous Copper Fabricated by Continuous Casting	206
Synthesis and Osteoinductive Properties of Nanosized Lithium-Modified Calcium-Organic Frameworks	198
The Effect of Graphene Oxide Deposited on Titanium Surface on Structural, Corrosion, and Biological Properties	192
Numerical and Experimental Study of Laser Surface Modification Using a High-Power Fiber CW Laser	190
Discrete Element Simulation of the Relationship between Composition, ITZ Property, and Tensile Behavior of Eco-Friendly UHPC Matrix	187
Theoretical Study of Electric, Dielectric, and Optical Properties in Ion Doped Multiferroic SrFe12O19 Nanoparticles	176
Bio-Inspired Reduced TiO2 Nanotube Photocatalyst Modified with Polydopamine and Silk Fibroin Quantum Dots for Enhanced UV and Visible-Light Photocatalysis	172
Changes in the Laser-Processed Ti6Al4V Titanium Alloy Surface Observed by Using Raman Spectroscopy	165
Phase-Field Insights into Hydrogen Trapping by Secondary Phases in Alloys	165
Investigation on Mechanism of Microstructure Evolution during Multi-Process Hot Forming of GH4169 Superalloy Forging	163
Enhancing Thermoelectrical Properties of Silver-Nanowire-Embedded Heatable Textiles via Sputter-Mediated Nanowire Structural Modulation	155
In Vitro Antimicrobial Effect of Novel Electrospun Polylactic Acid/Hydroxyapatite Nanofibres Loaded with Doxycycline	154
Mapping the Relationship Between Diffusion Characteristics of Warm-Mix Recycled Asphalt on Molecular Dynamics (MD) and High-Low Temperature Properties of Mixtures	152
Investigation of Cross-Linked Chitosan-Based Membranes as Potential Adsorbents for the Removal of Cu2+ Ions from Aqueous Solutions	147
Effects of Annealing and Thickness of Co60Fe20Yb20 Nanofilms on Their Structure, Magnetic Properties, Electrical Efficiency, and Nanomechanical Characteristics	145
Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting	141

Mechanical Spectroscopy Study of CrNiCoFeMn High-Entropy Alloys	136
Numerical Simulation of the Effect of Freeze-Thaw Cycles on the Axial Compression Strength of Rubber Concrete	136
Recycling-Oriented Development and Microstructure–Property Evaluation of High-Recycled 6xxx Aluminum Alloys and CRM-Lean 6111 Alloy for Automotive Applications	133
Dynamic Response Mechanism of Bedding Slopes with Alternatively Distributed Soft and Hard Rock Layers Under Different Seismic Excitation Directions: Insights from Numerical Simulations	133
Predicting the Gas Permeability of Sustainable Cement Mortar Containing Internal Cracks by Combining Physical Experiments and Hybrid Ensemble Artificial Intelligence Algorithms	132
The Influence of Selected Laser Engraving Parameters on Surface Conditions of Hybrid Metal Matrix Composites	128
Finite Element Analysis and Fatigue Test of INTEGRA Dental Implant System	125
Manufacturability Assessment of Design Decisions for Reducing Material Diversity in Single-Piece and Small-Batch Production	125
A Study on the Fracture Properties of Cement Asphalt Emulsion Mixture Based on the SCB Test	124
Study on Modification and Mechanism of Construction Waste to Solidified Silt	123
The Effects of Lubricooling Ecosustainable Techniques on Tool Wear in Carbon Steel Milling	123
Side Oscillation Milling: Modeling, Analysis, and Compensation of Cutting Forces Through Feed Optimization	123
Stability of SnSe-Based Thermoelectric Compounds	122
Effects of a Complex Environment on Fatigue and Self-Healing Characterization of Asphalt Composites Containing Rock Asphalt	121
Experimental Study on Impact Performance of Basalt-Polypropylene Fiber Reinforced High-Performance Concrete	115
Stripe Noise Removal in Blazed Grating Generation for Electrically Tunable Beam Deflector	112
Microwave Electrodynamic Study on Antiferroelectric Materials in a Wide Temperature Range	111
Magnetization Processes in Metallic Glass Based on Iron of FeSiB Type	111
Factors Influencing the Thermo-Hydro-Mechanical Behavior of Unstabilized Rammed Earth Walls	106
Electron Screening in Deuteron–Deuteron Reactions on a Zr Target with Oxygen and Carbon Contamination	104
Silicon Carbide: Material Growth, Device Processing, and Applications	102
Investigation of the Thermodynamic Transformation and Rare Earth Microalloying of a Medium Carbon-Medium Alloy Steel for Large Ball Mill Liners	102
Nanoswimmers Based on Capped Janus Nanospheres	102
X-ray Fluorescence Analysis of Pigments in Gothic Frescoes, Coats of Arms, and Polychromy on Sculptures on the Triforium in St. Vitus Cathedral on the Territory of the Czech Kingdom in the 14th Centur	101
Band Structure and Quantum Transport of Bent Bilayer Graphene	98
Mechanical and Acoustic Properties of Alloys Used for Musical Instruments	98
Mechanobiology Platform Realized Using Photomechanical Mxene Nanocomposites: Bilayer Photoactuator Design and In Vitro Mechanical Forces Stimulation	97
Effect of Tool Shoulder Profile on Grain and Texture Development in the Weld Interface Zone of Friction-Stir-Welded Dissimilar AA2024/AA7075 Joints	95
A Method for Determining the Minimum Thickness of the Cut Layer in Precision Milling	95
Multi-Material Additive Manufacturing for Advanced High-Tech Components	95
Characterization of Silicate Glass/Mullite Composites Based on Coal Fly Ash Cenospheres as Effective Gas Separation Membranes	94
Advantages of Ferroelectrics as a Component of Heterostructures for Electronic Purposes: A DFT Insight	94
Development and Testing of the Thermoelectric Thermal Energy Conversion Device in the Conditions of Existing Aluminum Production	93
Research on Temperature Field of Controllable Bonded Prestressed Structure Based on Electrothermal Method	93
Effects of Mode Mixity and Loading Rate on Fracture Behavior of Cracked Thin-Walled 304L Stainless Steel Sheets with Large Non-Linear Plastic Deformation	93
Exciting and Detecting Higher-Order Guided Lamb Wave Modes in High-Density Polyethylene Structures Using Ultrasonic Methods	93
Effect of Melt-Spinning Parameters on the Structure and Properties of Ni55.5Mn18.8Ga24Si1.7 Heusler Alloy Ribbons	92
Effect of Sepiolite on the Field-Dependent Normal Force of Magnetorheological Grease	92
A Study on the Cutting Characteristics of Bottom Abrasive Grains in Helical Grinding Tools	90
Assessment of the Suitability of Coke Material for Proppants in the Hydraulic Fracturing of Coals	90
Investigation of Plasma-Electrolytic Processing on EDMed Austenitic Steels	90
Analyzing the Relationship between the Chemical Composition and the Surface Finish of Alnico Alloys in EDM	90
Investigating the Impact of Electrolyte Flow Velocity on the Resistivity of Vanadium Redox Batteries: A Theoretical Analysis and Experimental Data Comparison	89
Development of an Instantaneous Loading Impact Test System for Containment of a Nuclear Power Plant during Aircraft Impact on Steel Bar Joints	89
A Novel One-Step Reactive Extrusion Process for High-Performance Rigid Crosslinked PVC Composite Fabrication Using Triazine Crosslinking Agent@Melamine-Formaldehyde Microcapsules	89
Evidence of Individual Superspin Relaxation in Diluted Fe3O4/Hexane Ferrofluids	89
Dispersal Characteristics Dependence on Mass Ratio for Explosively Driven Dry Powder Particle	89
Effect of Carbon and Nitrogen Concentrations on the Superconducting Properties of (NbMoTaW)1CxNy Carbonitride Films	88
Flexural Behavior of BFRP Bar–Recycled Tire Steel Fiber-Reinforced Concrete Beams	88
7Be Recovery from Seawater by Sorbents of Various Types	88

Hybrid Binders Through Alkaline Activation of Fine Construction and Demolition Waste	86
Effect of Cd Doping on the Gas-Sensitive Properties of ZnSn(OH)6	86
Assessment of the Surface Characteristics of ISO 5832-1 Stainless Steel for Biomaterial Applications	86
Dimensional Accuracy Assessment of 3D-Printed Edentulous Jaw Models: A Comparative Analysis Using Three Laboratory Scanners	85
Novel Methodology to Assess Salt Movement Between Mortar and Stones from Heritage in Spain	85
Evaluation of Oral Mucosa Elastomers for a 3D Oral Simulation Model	85
Investigation of the Influence of Process Parameters on the Physicochemical and Functional Properties of Oil-Based Composites	85
Study on the Deterioration of Chloride Erosion in Tunnel Construction Joints Under a Multifactorial Environment	84
Impact of High Energy Milling and Mineral Additives on a Carbonate–Quartz–Apatite System for Ecological Applications	84
Magnetocaloric Effect of Gd1-xDyxScO3 (x = 0, 0.1, 0.2 and 1) Polycrystalline Compounds	84
The Synthesis of New Chalcogenides from the System GeTe6-Cu and a Layered Structure Based on Them and an Azo Polymer for Application in Optoelectronics	83
Experimental Investigation of Delayed Fracture Initiation in Advanced High-Strength Steel Under Accelerated Bending	82
Critical Design Parameters of Tantalum-Based Comb Structures to Manipulate Mammalian Cell Morphology	81
Strain-Rate Effects on the Mechanical Behavior of Basalt-Fiber-Reinforced Polymer Composites: Experimental Investigation and Numerical Validation	81
Autoregulation of Woven Fabric Structure: Image-Based and Regression Analysis of Structural Homogeneity Under Varying Weaving Parameters	81
New Three Dimensional-Printed Polyethylene Terephthalate Glycol Liners for Hip Joint Endoprostheses: A Bioactive Platform for Bone Regeneration	80
The Effect of Thermal Processing on the Microstructure and Properties of a Novel Nickel-Based Powder Metallurgy Superalloy	80
MBL-TransUNet: Enhancing Mesostructure Segmentation of Textile Composite Images via Multi-Scale Feature Fusion and Boundary Guided Learning	80
Green Design and Life Cycle Assessment of Novel Thiophene-Based Surfactants to Balance Their Synthesis Performance and Environmental Impact	80
Electroanalysis of Apocynin Part 2: Investigations on a Boron-Doped Diamond Electrode in Aqueous Buffered Solutions	79
Dynamic Softening Mechanism of Platinum Thermomechanically Deformed at Low Strain Rate	79
Effect of 3 wt% Cu on the Microstructure and Hardness of a Ti-10Ta-1.6Zr Alloy	79
Stabilization of Styrene Pickering Emulsions Using SiO2 Derived from Waste Cement	79
Preparation of Infrared Anti-Reflection Surfaces Based on Microcone Structures of Silicon Carbide	78
Influence of Moisture Invasion on the Deterioration of Epoxy Resin Performance, and Modification and Enhancement Methods	78
Substrate Orientation-Dependent Synaptic Plasticity and Visual Memory in Sol–Gel-Derived ZnO Optoelectronic Devices	78
Fracture Toughness, Work of Fracture and Hardness of 3D-Printed Denture Base Resins	78
A Study on the Microstructure and Properties of CoCr Alloy Deposited Via Arc Deposition on a Single-Crystal Alloy	77
Effect of Ultrasonic Rolling on the Surface Integrity and High Temperature Oxidation Properties of Laser Melted NiCrAl Coatings	77
Quantification of the Post-Fire Strength Retention Factors for Selected Standard Duplex and Lean Duplex Stainless Steel Grades	77
Optical Property Simulations of Gold and Silver Nanostructured Arrays Within a Liquid Crystal Environment	77
Ethylene Propylene Diene Monomer-Based Composites Resistant to the Corrosive Action of Acetic Acid	76
Influence of the Compliance of a Technological System on the Machining Accuracy of Low-Stiffness Shafts in the Grinding Process	76
The Effect of SiO2 Particle Size on Crystallization Behavior and Space Charge Properties for SiO2/MMT/LDPE Composites	76
Expanding the “Magic Triangle” of Reinforced Rubber Using a Supramolecular Filler Strategy	76
Study on Slipform Paving of Concrete Containing Alkali-Free Accelerators on Roadway Floor	76
Laboratory Investigation on Dynamic Complex Modulus of FRPU Composite	76
Influence of Specimen Width on Crack Propagation Process in Lightly Reinforced Concrete Beams	76
In Vivo and In Vitro Response to a Regenerative Dental Scaffold	75
Materials Make a Better Life: Functional Metals, Metal Oxides, and Metal Complexes	75
Optical and Geometrical Properties from Terahertz Time-Domain Spectroscopy Data	75
Synergistic Effect of Yak Dung Fiber and Yak Dung Ash on the Mechanical and Shrinkage Properties of Cement Mortar	75
Design of Acoustic Absorbing Structures for Mercurous Halide-Based Acousto-Optic Tunable Filters	75
Evolution of Microstructural and Mechanical Properties of Alloy 617B During Service on a Key-Component Test Platform at 700 °C	74
A Low-Profile and Ultra-Wideband Pancharatnam–Berry Coding Metasurface for High-Efficiency and Wide-Angle Circular Polarization Anomalous Reflection	74
Friction Characteristics of Low and High Strength Steels with Galvanized and Galvannealed Zinc Coatings	74
Preparation and Characterization of Nanofiber Coatings on Bone Implants for Localized Antimicrobial Activity Based on Sustained Ion Release and Shape-Preserving Design	74
Reduction in Olfactory Discomfort in Inhabited Premises from Areas with Mofettas through Cellulosic Derivative–Polypropylene Hollow Fiber Composite Membranes	74
The Effect of the Iridium Alloying and Hydrogen Sorption on the Physicochemical and Electrochemical Properties of Palladium	73
Utilization of Fibrous Mat Residues from Upholstered Furniture as Sustainable Fillers in Plywood Production	73
Fracture Behavior and Mechanism of Nb-Si-Based Alloys with Heterogeneous Layered Structure	73
Investigation of the Strain–Stress Field in Nanoscale Multilayer Systems by the Phase Plane Method	73
Ex Situ Study on the Co-Preparation of Pitch and Carbon Black from Petroleum Residue to Improve the Cost-Efficiency of the Pitch Synthesis Plant	73
Research on Evolution of Relevant Defects in Heavily Mg-Doped GaN by H Ion Implantation Followed by Thermal Annealing	73
Trimethylsilane Plasma-Nanocoated Silver Nanowires for Improved Stability	73
Effect of Preheating and Post-Heating on the Microstructures and Mechanical Properties of TC17-Ti2AlNb Joint with Electron Beam Welding	72
Properties of Adhesive Mortars Using Waste Glass	72
Texture-Differentiated Grain Growth in Silicon Steel: Experiments and Modeling	72
Innovative Materials Based on Epoxy Resin for Use as Seat Elements in Bulk Transport	72
Multiphase Reconstruction of Heterogeneous Materials Using Machine Learning and Quality of Connection Function	72
Coherent Oscillations in a SrRuO3/BiFeO3 Superlattice	71
Multiscale Simulation of Crack Propagation in Impact-Welded Al4Cu9 Alloy Based on Cohesive Zone Model	71
Regulation of Magnetocaloric Effect in Ni40Co10Mn40Sn10 Alloys by Using a Homemade Uniaxial Strain Pressure Cell	71
Forming-Free Tunable Analog Switching in WOx/TaOx Heterojunction for Emulating Electronic Synapses	71
Effect of Stearyl Methacrylate Comonomer on the Mechanical and Physical Properties of Dimethacrylate-Based Dental Resins	71
Dynamic Tensile Behavior of Woven C/SiC Composite: Experiments and Strain-Rate-Dependent Yield Criterion	71
Biodiesel Production Using Lithium Metasilicate Synthesized from Non-Conventional Sources	71
Development of Wide-Angle Short-Wave Pass Thin Film Based on the Ultra-Thin Silicate Glass	71
Effect of Heat Treatment on the Microstructure and Properties of Ti600/TC18 Joints by Inertia Friction Welding	70
Numerical and Experimental Analysis of the Rotational Stiffness of a Timber Semi-Rigid Dowel-Type Connection	70
Optimizing Parameters with FEM Model for 20CrMnTi Laser Shocking	70
Investigation of the Preparation, Corrosion Inhibition, and Wear Resistance of the Chromized Layer on the Surfaces of T9 and SPCC Steels	70
Production of Mesoporous Magnetic Carbon Materials from Oily Sludge by Combining Thermal Activation and Post-Washing	70
The Reaction Behavior of 2CaO·SiO2 with CaO–SiO2–FeO–P2O5 Slag	70
The Microstructural Evolution of Cu-Sn-P Alloy during Hot Deformation Process	69
Parametric Study towards Optimization of a Short Duration Carbonation Process of Recycled Cement Paste	69
Structuring of Surface Films Formed on Magnesium in Hot Chlorobenzotriazole Vapors	69
Vacancy and Strain Effects on the Stability and Electronic Properties of 2D-Mg Intercalated GaN	69
Kinetics of Ordering and Decomposition in Ti-Al-X (X = Si, Zr) Alloys: Monte Carlo Modeling	69
AlOOH-Coated Glass Fiber-Reinforced Composites for Pipeline Rehabilitation: Enhancement of Interfacial Adhesion and Durability	68

In Vitro Degradation Studies of 3D-Printed Thermoplastic Polyurethane for the Design of Vascular Implant	68
Strength Characteristics of Historical Mortars—Experimental Study Using the Double Punch Method	68
The Effect of Different Nanomaterials Additions in Clay-Based Composites on Electromagnetic Transmission	67
Laser Direct Joining of Steel to Polymethylmethacrylate: The Influence of Process Parameters and Surface Mechanical Pre-Treatment on the Joint Strength and Quality	67
Analysis of the Effect of Component Ratio Imbalances on Selected Mechanical Properties of Seasoned, Medium Viscosity Bone Cements	67
A Polymorph of Dipeptide Halide Glycyl-L-Alanine Hydroiodide Monohydrate: Crystal Structure, Optical Second Harmonic Generation, Piezoelectricity and Pyroelectricity	67
Unraveling Anomalous Eutectic Formation in Ni-Sn Alloys During Directional Solidification with Transition Variable Speed	67
Micromechanical and Tribological Performance of Laser-Cladded Equiatomic FeNiCr Coatings Reinforced with TiC and NbC Particles	66
Corrosion Behavior and Mechanical Properties of Metallic Materials	66
Experimental Study of the Discharging Process of Sorption Heat Storage Units Filled with 13X Zeolite	66
Carbon Quantum Dots-Doped Ni3Se4/Co9Se8/Fe3O4 Multilayer Nanosheets Prepared Using the One-Step Solvothermal Method to Boost Electrocatalytic Oxygen Evolution	66
Effect of Low Corrosion Levels on the Bond Performance of Lap-Splices in Reinforced Concrete Beams	66
Fatigue Behavior and Life Prediction of L-PBF Ti64 with Critical Plane Based Small Building Direction Variations Under Non-Proportional and Multiaxial Loading	66
Design of Tool Shape and Evaluation of Deformation Behavior by Digital Image Correlation Method in V-Bending of Sheet Metal Using Plastic Tools Manufactured by 3D Printer	66
Performance Prediction and Process Optimization of Aging-Resistant Rubber-Modified Asphalt via Enhanced BP Neural Network and Multi-Objective NSGA-II	66
Adsorption Tuning of Polarity and Magnetism in AgCr2S4 Monolayer	65
The Possibility of Using Components of Plant Origin as Reinforcements in Composite Friction Materials—A Simulation-Based Braking Process Study	65
Effect of Post-Heat Treatment on Microstructure and Corrosion Property of Additively Manufactured AlCoCrFeNi2.1 Eutectic High-Entropy Alloy	65
Seagrass Leaves: An Alternative Resource for the Production of Insulation Materials	65
Mechanical Properties Analysis of Explosive Welded Sheet of AA2519-Ti6Al4V with Interlayer of AA1050 Subjected to Heat-Treatment	65
Electrochemical Response of 3D-Printed Free-Standing Reduced Graphene Oxide Electrode for Sodium Ion Batteries Using a Three-Electrode Glass Cell	65
Special Issue “Recent Developments in Bio-Based Particleboards and Fiberboards”	64
Unveiling GaN Prismatic Edge Dislocations at the Atomic Scale via P-N Theory Combined with DFT	64
Pressure-Tuning Superconductivity in Noncentrosymmetric Topological Materials ZrRuAs	64
Surface Functionalisation of Hyaluronic Acid-Based Foams with TiO2 via ALD: Structural, Wettability and Antimicrobial Properties Analysis for Biomedical Applications	64
The Effect of Laser Surface Treatment on the Bond Strength of Adhesive Materials to Primary Teeth: A Systematic Review	64
Synthesis and Properties of Highly Tilted Antiferroelectric Liquid Crystalline (R) Enantiomers	64
Nano-Innovations in Cancer Therapy: The Unparalleled Potential of MXene Conjugates	64
Tensile Deformation and Fracture of Unreinforced AZ91 and Reinforced AZ91-C at Temperatures up to 300 °C	63
Structural, Magnetic, and Magneto-Optical Properties of Thin Films of BaM Hexaferrite Grown by Laser Molecular Beam Epitaxy	63
Investigation on Carbonation and Permeability of Concrete with Rice Hush Ash and Shop Solution Addition	63
Austenite Growth Behavior and Prediction Modeling of Ti Microalloyed Steel	63
Flexural Strength and Surface Properties of 3D-Printed Denture Base Resins—Effect of Build Angle, Layer Thickness and Aging	63
Investigation of Structural, Elastic and Magnetic Properties of CoCr2−xZrxO4 Nanoparticles	63
Optimization of Johnson–Cook Constitutive Model Parameters Using the Nesterov Gradient-Descent Method	63
Structural, Electrical and Corrosion Properties of Bulk Ti–Cu Alloys Produced by Mechanical Alloying and Powder Metallurgy	63
The Impact of the Final Sintering Temperature on the Microstructure and Dielectric Properties of Ba0.75Ca0.25TiO3 Perovskite Ceramics	63
Young’s Modulus and Vickers Hardness of the Hydroxyapatite Bioceramics with a Small Amount of the Multi-Walled Carbon Nanotubes	63
A Study of the Response Surface Methodology and Finite Element Method to Model Aircraft Engine Body Deformations During Hole Drilling	62
A Novel Hydroforming Process by Combining Internal and External Pressures for High-Strength Steel Wheel Rims	62
Curing Effect on Durability of Cement Mortar with GGBS: Experimental and Numerical Study	62
Evaluation of CNTs and SiC Whiskers Effect on the Rheology and Mechanical Performance of Metakaolin-Based Geopolymers	62
Effect of Abrasive Grain Size on the Abrasion Volume Loss of Subfossil and Recent Oak Wood in Three Characteristic Sections	62
Analysis of Cutting Forces and Geometric Surface Structures in the Milling of NiTi Alloy	62
Application of Laser-Induced Breakdown Spectroscopy for Depth Profiling of Multilayer and Graded Materials	62
Spectroscopic Analysis on Different Stacking Configurations of Multilayered MoSe2	62
Effect of Limestone Powder Fineness on the Physical and Mechanical Performance of Concrete	62
Durability Testing of a Polymer Worm Gear Used in a Vehicle Steering System	62
The Impact of Selected Eutectic Solvents on the Volatile Composition of Citrus lemon Essential Oil	62
Effect of Poling on Multicatalytic Performance of 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Sr0.3)TiO3 Ferroelectric Ceramic for Dye Degradation	61
Enhanced Wettability and Adhesive Property of PTFE through Surface Modification with Fluorinated Compounds	61
Interpretable Machine Learning for Prediction of Post-Fire Self-Healing of Concrete	61
Analysis of Kerf Quality Characteristics of Kevlar Fiber-Reinforced Polymers Cut by Abrasive Water Jet	61
Effect of Material Change on Stirnol Engine: A Combination of NiTiNOL (Shape Memory Alloy) and Gamma Stirling Engine	60
Electrochemical and Structural Characterization of Lanthanum-Doped Hydroxyapatite: A Promising Material for Sensing Applications	60
A Novel Measurement Approach to Experimentally Determine the Thermomechanical Properties of a Gas Foil Bearing Using a Specialized Sensing Foil Made of Inconel Alloy	60
Compressive Strength and Chloride Resistance of Slag/Metakaolin-Based Ultra-High-Performance Geopolymer Concrete	59
Structural Diversity, XAS and Magnetism of Copper(II)-Nickel(II) Heterometallic Complexes Based on the [Ni(NCS)6]4− Unit	59
Tuning the Performance of Ge-Doped CZTSSe Solar Cells via Selenization	59
Change in Selected Mechanical Properties of Beech Wood at the Contact Drying	59
Mechanical Properties and Fatigue Life Estimation of Selective-Laser-Manufactured Ti6Al4V Alloys in a Comparison Between Annealing Treatment and Hot Isostatic Pressing	59
Self-Organization Effects of Thin ZnO Layers on the Surface of Porous Silicon by Formation of Energetically Stable Nanostructures	59
Influence of Waste Basalt Powder Addition on the Microstructure and Mechanical Properties of Autoclave Brick	59
Effect of Cooling Rate on the Microstructure and Mechanical Property of Nickel-Based Superalloy MAR-M247	59
A Comparison Between the Residual Stresses of Ti6Al4V and Ti-6Al-2Sn-4Zr-6Mo Processed by Laser Powder Bed Fusion	58
Performance Optimization of Pb0.97La0.03Sc0.45Ta0.45Ti0.1O3 Ceramics by Annealing Process	58
Modeling and Characterization of Surface Discharges in Insulating Material for Spacers: Electrode Shape, Discharge Mode, and Revision of the Creepage Concept	58
Hydration and Expansion Characteristics of MgO Expansive Agent in Mass Concrete	57
Computational Screening of Bonding-Controlled Electronic Structures in One-Dimensional Cu/Ag-Based Hybrid Semiconductors	57
Increasing Exploitation Durability of Two-Layer Cast Mill Rolls and Assessment of the Applicability of the XGBoost Machine Learning Method to Manage Their Quality	57
Experimental Investigation and FEM Simulation of the Tensile Behavior of Hot-Rolled Quenching and Partitioning 5Mn Steel	57
Characterization Studies on Graphene-Aluminium Nano Composites for Aerospace Launch Vehicle External Fuel Tank Structural Application	57
Dispersion Mechanism of Conductive Phase Materials and Micro-Mechanical Properties of ERCC	57
Mechanical Properties and Failure Behavior of Dry and Water-Saturated Foliated Phyllite under Uniaxial Compression	57
Evaluation of Setting Times of Concrete Using Electro-Mechanical Impedance Sensing Technique	57
Influence of an Engineered Notch on the Electromagnetic Radiation Performance of NiTi Shape Memory Alloy	57
Optimisation of Response Surface Methodology Based on Finite Element Analysis for Laser Cladding of Highly Hardened WC(Co,Ni) Coatings	57
Oil-Based Phase Change Emulsions Endowed with High Thermal Conductivity and Responsive Rheological Behavior	57
Sustainable Soil Reinforcement by Maximizing Geotechnical Performance with Rice Husk Ash in Subgrade Layers	57
Mechanical and Environmental Properties of Cemented Paste Backfill Prepared with Bayer Red Mud as an Alkali-Activator Substitute	57
Training Deep Neural Networks with Novel Metaheuristic Algorithms for Fatigue Crack Growth Prediction in Aluminum Aircraft Alloys	57
A Study of the Possibility of Producing Annealed and Metallized Pellets from Titanomagnetite Concentrate	56
Enzymatic Modification of Walnut Shell for High-Efficiency Adsorptive Methylene Blue Removal	56
Thermal [2+2] Cycloaddition Reactions of Perfluorobicyclo[2.2.0]hex-1(4)-ene with Ethylene, Benzene and Styrene: A MEDT Perspective	56
Investigation on Adsorption of Polar Molecules in Vegetable Insulating Oil by Functional Fossil Graphene	56
GaN Vertical Transistors with Staircase Channels for High-Voltage Applications	56
Percentage of Gutta-Percha-Filled Areas in Canals Obturated by Two Different Core Techniques with Endodontic Bioceramics Sealer	56
Analysis of the Uniformity of Mechanical Properties along the Length of Wire Rod Designed for Further Cold Plastic Working Processes for Selected Parameters of Thermoplastic Processing	55
Titanium Oxide Formation in TiCoCrFeMn High-Entropy Alloys	55
A Rapid Spheroidizing Annealing Process for High-Carbon Steel	55
New Method for Detecting Flange Fracture Initiation in Incremental Radial Extrusion	55
Effects of Solid Solution Heat Treatment on the Corrosion Behavior of 800H Used in Fourth-Generation Nuclear Power Generators	55
The Elastic Critical Moment of Lateral Torsional Buckling of Steel Beams with Spatially Elastically Restrained at the Support Nodes	55
Microstructure and Mechanical Properties of 7072 Aluminum Alloy Joints Brazed Using (Ni, Y)–Modified Al–Si–Cu–Zn Filler Alloys	55
Effect of Paste Fluidity and Paste-to-Aggregate Ratio on the Strength and Permeability of Porous Mortar from Manufactured Sand	55