Carbon Letters

Article	Citations
Obituary: B. S. Rhee (June 25, 1932–December 4, 2020)	99
Synthesis of multicolor fluorescent CDs from natural plant kaempferide and their application in anti-counterfeiting inks	96
Investigation of freeze–thaw deterioration effects on electrical properties and electric-heating capability of CNT-CF incorporated cement mortar	70
In situ construction of N-rich carbon nitride (C3N5)/silver phosphate (Ag3PO4) S-scheme heterojunctions for the efficient photocatalytic removal of levofloxacin antibiotic and RhB	66
Improvement of tensile strength and anti-oxidation property of graphite electrode for electric arc furnace through heterogenization of binder pitch	64
Evolution of the understanding of quantum capacitance through advancements in graphene-related carbon materials	63
A review on the adsorption of volatile organic compounds by biomass-based porous carbon (BPC) and its mechanism	60
Effective removal of phenol from wastewater by magnetic porous loofah biochar	58
A dual-mode fluorescent probe for temperature-sensing and metal ions detection based on castor leaves-derived carbon quantum dots	57
Heat-generation capability of CNT/PDMS nanocomposites with different CF lengths: experimental and numerical approaches	54
Polyacrylonitrile-derived carbon nanofibers/carbon foams containing closed microspheres	52
Marine biomass-derived activated carbon as an electrode material for electric double-layer capacitors	41
Application of modified graphite felt as electrode material: a review	40
Current overview of the valorization of bio-wastes for adsorbed natural gas applications	39
Growth of rGO nanostructures via facile wick and oil flame synthesis for environmental remediation	38
Simple Joule-heating pyrolysis in air boosts capacitive performance of commercial carbon fiber cloth	37
Two-dimensional materials based on negative differential transconductance and negative differential resistance for the application of multi-valued logic circuit: a review	35
Structural evolution of the thermal conversion products of modified coal tar pitch	34
Novel pH-sensitive of organic composite (kc-g-poly(AAc-co-AAm)/bentonite), synthesis and characterization candidate as a carrier for controlled release system in vitro to some drugs	33
Nitrogen-doped reduced graphene oxide (N-rGO) three-dimensional electrode electrochemically activates persulfate for the degradation of tetracycline	32
Influence of graphite platelets with and without SiC on the densification and fracture toughness of ZrB2 ceramic sintered by SPS	30
Fluorescent carbon quantum dots synthesized from coconut shell for the detection of Fe3+ ion	30
Facile synthesis and characteristics of NiMoS2/rGO nanocomposites for energy and environmental application	29
Perspective on carbon nanotubes as conducting agent in lithium-ion batteries: the status and future challenges	28
A review of carbon-based materials and their coating techniques for biomedical implants applications	28

Experimental and theoretical study of lead sulfide nanocrystals attached to nitrogen-doped carbon nanotubes	28
Finite element simulation of mechanical properties of TaC-based core/graphite shell fibrous monolithic ceramics	27
Enhancing corrosion resistance of bridge structural steel through graphene/cerium hydroxide composite coatings in polluted marine atmospheres	27
Synthesis of γ-carboline derivatives via indole-2,3-dienolate	26
Recent advances in carbon-based catalysts for electrocatalytic nitrate reduction to ammonia	26
Experimental analysis and optimization on machining of coated carbon fiber and nanoclay reinforced aluminum hybrid composites	25
Analysis of spinnable mesophase pitch in terms of lyotropic liquid crystalline solution	24
Graphene oxide: Fe2O3 nanocomposite: synthesis, properties, and applications	24
Smooth surface induced glossy appearance of freestanding multiwall carbon nanotube sheet	24
One-step preparation of N-doped porous carbon materials with excellent microwave absorption properties based on methylene blue saturated wood-based activated carbon	23
Synthesis and development of a highly adhesive graphene coating to improve the corrosion resistance of zinc in aggressive environment	23
Structural modulation of graphene–polyimide interfaces below pyrolysis temperature under electrothermal treatment	23
Effect of asphaltene content in petroleum residues on carbon layer properties and the electrochemical performance of SiOx as an anode in lithium-ion batteries	22
Preparation of whisker carbon nanotube composite paper by vacuum filtration method and its electrical heating performance	22
Advances in graphene aerogel–metal oxides (Ni, Co, and Mn) composites for supercapacitor electrodes	22
Fluorinated reed-carbon with three-dimensional porous channels to boost high-rate performance of lithium/fluorinated carbon battery	22
Facile approach to preparation of novel black vitamin C using microwave treatment: characteristics, antioxidant activity, and anti-pollution properties	21
Cerium-doped carbon quantum dots trigger mung bean seeds to help mitigate salt stress by increasing the degree of stomata opening	21
Evolution of electrical properties and microstructure of polyacrylonitrile-based carbon fibers during carbonization	21
Effect of anion species on preparation and properties of pitch-based activated carbon fibers by in-situ catalytic activation of metal nanoparticles	21
Experiment and molecular simulation for liquid phase adsorption of triethylenetetramine on activated carbon: equilibrium, kinetics, thermodynamics and molecular behavior	20
Investigation of the effect of catalyst type, concentration, and growth time on carbon nanotube morphology and structure	20
Mechanism of activated carbon-catalyzed methane decomposition process for the production of hydrogen and high-value carbon	20
Investigation and analysis of surface roughness in machining carbon fiber reinforced polymer composites using artificial intelligence techniques	20
Insights into carbon formation over molten salt-promoted NiO/Al2O3 during methane pyrolysis	20
Hierarchically porous carbon derived from tobacco waste by one-step molten salt carbonization for supercapacitor	20
Phase-shift controller for analog device application using 2-D material	19
Carbon nanofiber electrodes derived from polyacrylonitrile/cucurbituril composite and their supercapacitor performance	19
Carbon aerogel supported Ni–Fe catalysts for superior oxygen evolution reaction activity	19
Hydrophobic ionic liquid-modified graphene via fluid-dynamic process for ion-to-electron transducers for all-solid-state potentiometric sensors	19
Porous carbon derived from waste corrugated paper with KOH-NaOH mixture and its adsorption property for methylene blue	18
Electrophoresis-deposition construction of covalently bonded interface material with enhanced thermal conductivity	18
Treatment of wastewater containing organic pollutants in the presence of N-doped graphitic carbon and Co3O4/peroxymonosulfate	18
Deriving activated carbon using microwave combustion technique and its energy storage applications: a topical review	18
Fibrous and granular activated carbon mixed media for effective gas removal as a cabin air filter	18
Sun-powered synthesis: harnessing multiwall carbon nanotube-EB photocatalytic magic in a unified photocatalytic-biocatalytic system for solar- driven L-glutamate production from ɑ-ketoglutarate	18
Optical method for detecting the concentration of sucrose based on plasmonic nanostructures	18
Salt-activated phenolic resin/PAN-derived core-sheath nanostructured carbon nanofiber composites for capacitive energy storage	18
A recent advancement on hydrothermal carbonization of biomass to produce hydrochar for pollution control	17
Construction of polylactic acid-based flame retardant composites by zinc oxide and bamboo carbon	17
ZIF67-derived ultrafine Co9S8 nanoparticles embedded in nitrogen-doped hollow carbon nanocages for enhanced performances of trifunctional ORR/OER/HER and overall water splitting	17
Nitrogen and phosphorous co-doped carbon nanotubes for high-performance supercapacitors	17
Microstructure characteristics and hydrogen storage kinetic of nano MgNi-REO alloys	17
Preparation and characterization of pitch-derived activated carbon pellet for butane adsorption	17
Carbon-based microelectrodes for environmental remediation: progress, challenges and opportunities	17
Constructing all-in-one graphene-based supercapacitors for electrochemical energy storage via interface integration strategy	17
Research progress and the prospect of CO2 hydrogenation with dielectric barrier discharge plasma technology	16
Comparative study between micro- and nano-carbon with epoxy for gamma shielding applications	16
High capacitance sustainable low-cost cold plasma exposed activated carbon electrode derived from orange peel waste to eco-friendly technique	16
Soft-template-assisted synthesis of N-doping layered CoS2 nanoparticles as an advanced anode for sodium-ion batteries	16

Facile synthesis of Ni-based oxides nanocatalyst: effect of calcination temperature on NRR properties of NiO	16
Evaluation of carbon nanotubes dispersion in aqueous solution with various dispersing agents	15
Investigating structural disparities in carbon nanoribbons and nanobelts through spectroscopies	15
Facile synthesis of silver nanoparticle-decorated zinc oxide nanocomposite-based pencil graphite electrode for selective electrochemical determination of nitrite	15
Comparison of carbon coating and MCMB structures used in graphite anodes for potassium ion batteries	15
Development of nitrogen-decorated carbon dots (NCDs) thermally conductive film for windows application	15
The effect of heteroatoms and temperature ramping rate on pyrolysis of coal tar pitch for high value of β-resin	15
Simultaneous electrochemical detection of ascorbic acid, dopamine and uric acid using Au decorated carbon nanofibers modified screen printed electrode	14
Facile microwave hydrothermal synthesis of citric acid-derived carbon dots for photothermal therapy of cancers under NIR irradiation	14
Au-loaded alkali metal-modified crystalline carbon nitride for photocatalytic nitrogen fixation	14
A method to characterize ink performance by line resistance measurement through modeling for direct pen writing	13
Dual-template synthesis of interconnected 3D hollow N-doped carbon network for electrochemical application	13
Recent advances of MXenes Mo2C-based materials for efficient photocatalytic hydrogen evolution reaction	13
Plasma treatment of CFX: the effect of surface chemical modification coupled with surface etching	13
Magnetic alignment of electrochemically exfoliated graphite in epoxy as a thermal interface material with high through-plane thermal conductivity	13
Synergistic effect of novel ionic liquid/graphene complex on the flame retardancy of epoxy nanocomposites	12
Preparation of a highly sensitive graphene-based sensor to investigate the effect of exercise on electrolytes in sweat in hot and humid environment	12
Electrochemical determination of paracetamol by SWCNT-modified carbon paste electrode: a cyclic voltammetric study	12
Influence of post-heat treatment over structural network and mechanical properties of carbon (C)-incorporated CVD TiCN thin-film coating	12
Pd–Fe bimetallic nanoparticles anchored on N-doped carbon-modified graphene for efficient catalytic organic reactions	12
Facile scalable synthesis of graphene oxide and reduced graphene oxide: comparative investigation of different reduction methods	12
Evaluation of adsorption characteristics of new-generation CNT-based adsorbents: characterization, modeling, mechanism, and equilibrium study	12
TiO2 nanoparticles anchored on graphene oxide nanosheets as a highly active photocatalyst for decabromodiphenyl ether degradation	12
Graphene quantum dots as game-changers in solar cell technology: a review of synthetic processes and performance enhancement	11
Development and characterization of poly(butylene adipate‐co‐terephthalate) (PBAT) composites with N, P-doped carbons for food packaging	11
Preparation of graphene–ZnO composite with enhanced photocatalytic performance	11
Correction to: Revealing the effect of graphite source on the properties of synthesized graphene oxide	11
Dual-templating-derived porous carbons for low-pressure CO2 capture	11
Preparation and capacitive property of graphene oxide composite supercapacitor electrodes functionalized by Fe-based metal–organic frameworks	11
Electrochemical sensor based on CuO/reduced graphene nanoribbons and ionic liquid for simultaneous determination of tramadol, olanzapine and acetaminophen	11
A novel synthesis of carbon foam@Fe2O3 via hydrolysis-driven emulsion polymerization for supercapacitor electrodes	11
Correction: A sandwich-like CMC-based/graphene/CMC-based conductive agent prepared from needle coke for high-performance LiFePO4 batteries	11
Eco-friendly flame-retardant epoxy composite using tannic acid and upcycled carbon black via mechano-fusion	11
Analysis of pore formation and development in carbon blacks activated in a CO2 gas atmosphere through microstructural observation	11
Submicron graphite platelet-incorporated PVDF composite: an efficient body motion-based energy harvester for flexible electronics	11
Mechanism in pH effects of electrochemical reactions: a mini-review	11
Enhanced CO2 capture by cupuassu shell-derived activated carbon with high microporous volume	11
One-step green synthesis and dispersion characteristics of silver/graphene core/shell-structure nanocomposites	10
Chemical dissolution of oxide layer on carbon steel SA 106 GR.B-based oxalic acid	10
Reusable, magnetic laser-induced graphene for efficient removal of organic pollutants from water	10
Effects of nitrogen plasma treatments on hydrogen storage capacity of microporous carbon at room temperature and its feasibility as a hydrogen storage material	10
Nuclear reactor graphite under irradiation: insights on microstructural degradation and deformation mechanisms from advanced transmission electron microscopy analysis	10
Correction to: Carbon-based materials in proton exchange membrane fuel cells: a critical review on performance and application	10
Mild purification of multiwalled carbon nanotubes with increased selectivity for carbon impurity and residual metal removal	10
Facile tuning of carbon nanotube morphologies via residual carbon control during catalyst preparation stage	10
Revealing the effect of graphite source on the properties of synthesized graphene oxide	10
Correction: The epoxy resin system: function and role of curing agents	10
Facile fabrication of CdS@GO binary nanocomposite coated GCE for separate and parallel electrochemical sensing of ascorbic acid, uric acid and nitrite	10
Optimization of the TiO2 content and location in core–shell tubular carbon nanofibers to improve the photocatalytic activity under visible light irradiation	10
Bias process for heteroepitaxial diamond nucleation on Ir substrates	10
The effect of non-polar solvent on the structural properties and electrochemical performance of LiFePO4/C cathode materials synthesized by solid-state reaction	10
Nitrogen plasma synthesis of flexible supercapacitors based on reduced graphene oxide/aloe vera/carbon nanotubes nanocomposite	10
Recent developments in the application of carbon-based nanomaterials in implantable and wearable enzyme-biofuel cells	10
Tribological behavior of friction stir process surface hybrid composite AA5083/MWCNT/Al2SiO5 using multi-quadratic RBF algorithm	9
Fe, N-doped carbon quantum dots from pig blood as peroxymonosulfate activator for photodegradation of ibuprofen	9
Mechanosynthesis of graphene nanoribbons from waste zinc–carbon batteries	9
Influence of carbon fibers on interfacial bonding properties of copper-coated carbon fibers	9
Rational design of dysprosium oxide nanochains decorated on graphitic carbon nitride nanosheet for the electrochemical sensing of riboflavin in food samples	9
rGO@Cu2ZnSnS4 chalcopyrites modified polypyrrole paper-based photoanode for solar water splitting	9
CO2 capture using activated carbon synthesized from date stone: breakthrough, equilibrium, and mass-transfer zone	9
A study on the correlation between microstructure change and the mechanical strength of a single CF modified by electron beam	9
Electroanalysis of nirofurazone at silver particles and graphite powder composite electrode	9
A vacuum pressure sensor based on graphene/ZnO nanorod Schottky junction	9
Customized carbon composite nanomaterials for the mitigation of emerging contaminants: a review of recent trends	9
An investigation on development of a molecular imprinted sensor with graphitic carbon nitride (g-C3N4) quantum dots for detection of acetaminophen	9
Preparation and properties of composite coatings, based on carbon nanotubes, for medical applications	9
Hierarchical porous carbons derived from corncob: study on adsorption mechanism for gas and wastewater	9
Preparation and characterization of carbon felt/carbon composites by chemical vapor infiltration process	9
Revealing the charge transfer mechanism in Er ion-doped Bi4O5Br2/g-C3N5 nanocomposite for efficient photocatalytic degradation of antibiotic tetracycline	8
Copper nanoparticles supported on biocarbon film from Sargassum spp. and its electrochemical activity in reducing CO2	8
Advances in ferroelectric and piezoelectric photocatalysts with oxygen vacancy	8
Optimization of mixed agro residue pellets for enhanced fuel quality and economic feasibility	8
Upcycling of waste masks into carbon nanotubes combined with ZIF-8 for the detection of heavy-metal ions and nitrite	8
Modified organic reagent for deeply purifying crude TiCl4: an in-depth study on key component and mechanism	8
Synthesis of g-C3N4/CQDs composite and its photocatalytic degradation property for Rhodamine B	8
Single- and double-atom catalyst anchored on graphene-like C2N for ORR and OER: mechanistic insight and catalyst screening	8
Oxidation behaviour and residual mechanical properties of carbon/carbon composites	8
One-step preparation of functionalized cotton exocarp-based sorbent for efficient Hg0 immobilization	8
Recent advances in properties and applications of nanoporous materials and porous carbons	8
Modulation of the lattice structure of 2D carbon-based materials for improving photo/electric properties	8

A graphene-based highly sensitive aptasensor for the detection of lung cancer marker CA125	8
Inorganic nanocrystal-carbon composite derived from cross-linked gallic acid derivative of polyphosphazenes for the efficient oxygen evolution reaction	8
Optimization of the eco-friendly synthesis of graphene oxide from graphite using Plackett–Burman and Box–Behnken models for industrial production orientation	8
Adsorption and sensing characteristics of air decomposed species onto pyridine-like PdN3-doped CNT: a first-principles study	8
Thermal and mechanical properties of diamond/SiC substrate reinforced by bimodal diamond particles	8
A nonenzymatic laser-induced flexible amperometric graphene electrode for glucose detection in saliva	8
A comparative study on metal species implanted amine–brookite–TiO2 nanorods for enhanced photocatalytic CO2 reduction	8