Carbon Letters

Papers
(The median citation count of Carbon Letters is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)
ArticleCitations
TiO2 nanoparticles anchored on graphene oxide nanosheets as a highly active photocatalyst for decabromodiphenyl ether degradation152
Carbon nanofiber electrodes derived from polyacrylonitrile/cucurbituril composite and their supercapacitor performance143
Enhanced CO2 capture by cupuassu shell-derived activated carbon with high microporous volume137
Submicron graphite platelet-incorporated PVDF composite: an efficient body motion-based energy harvester for flexible electronics126
Experiment and molecular simulation for liquid phase adsorption of triethylenetetramine on activated carbon: equilibrium, kinetics, thermodynamics and molecular behavior106
Interface and dimensionality driven engineering of carrier transport and phonon dynamics in MoS2/MWCNT nanocomposites94
Two-dimensional materials based on negative differential transconductance and negative differential resistance for the application of multi-valued logic circuit: a review91
The effect of heteroatoms and temperature ramping rate on pyrolysis of coal tar pitch for high value of β-resin88
Preparation and characterization of pitch-derived activated carbon pellet for butane adsorption84
Synergistic effect of novel ionic liquid/graphene complex on the flame retardancy of epoxy nanocomposites67
Facile microwave hydrothermal synthesis of citric acid-derived carbon dots for photothermal therapy of cancers under NIR irradiation66
Sun-powered synthesis: harnessing multiwall carbon nanotube-EB photocatalytic magic in a unified photocatalytic-biocatalytic system for solar- driven L-glutamate production from ɑ-ketoglutarate62
Fluorescent carbon quantum dots synthesized from coconut shell for the detection of Fe3+ ion58
Evolution of electrical properties and microstructure of polyacrylonitrile-based carbon fibers during carbonization58
One-step preparation of N-doped porous carbon materials with excellent microwave absorption properties based on methylene blue saturated wood-based activated carbon58
Comparison of carbon coating and MCMB structures used in graphite anodes for potassium ion batteries57
Novel pH-sensitive of organic composite (kc-g-poly(AAc-co-AAm)/bentonite), synthesis and characterization candidate as a carrier for controlled release system in vitro to some drugs56
Evolution of microstructure and properties of various types of PAN-based carbon fibers under the action of a mild electric field55
A comparative study of microstructures and thermal conductivities of nuclear graphite55
Mechanism in pH effects of electrochemical reactions: a mini-review55
Current overview of the valorization of bio-wastes for adsorbed natural gas applications54
Preparation of iron/carbon composite by grafting ferrocene to carbon nanofibers for supercapacitor electrodes50
Facile synthesis of self-doped carbon derived from waste tires as an efficient supercapacitor electrode material50
Perspective on carbon nanotubes as conducting agent in lithium-ion batteries: the status and future challenges49
Eco-friendly flame-retardant epoxy composite using tannic acid and upcycled carbon black via mechano-fusion49
Carbon Dot-Magnetite Nanoparticle Composites in CaCO₃ Microspheres for Multiplexed Bioimaging and Magnetic Targeting49
Study on fixation mechanism of soil available nutrients and optimization of production process of nutrient-rich biochar based on XGBoost machine learning prediction model46
Selectively anchoring Cu(OH)2 and CuO on amine-modified brookite TiO2 for enhanced CO2 photoreduction45
Preparation and electrochemical performance of porous carbon derived from polypyrrole43
Basic principles of resonance Rayleigh scattering in Graphene38
Chemical dissolution of oxide layer on carbon steel SA 106 GR.B-based oxalic acid38
Improving the compressive strength of interlaminar stiffened and reinforced glass fiber composites by CNT/epoxy composite film with photothermal effects36
Electrochemically tuned oxidized carbon nanotubes reinforced polypyrrole matrix in varying electrolytic environment as supercapacitor electrode36
Correction: In-situ growth of ZIF-8/CP with ultra-high adsorption capacity for removing Malachite green from water35
Inorganic nanocrystal-carbon composite derived from cross-linked gallic acid derivative of polyphosphazenes for the efficient oxygen evolution reaction35
Preparation of PAN/GO composite nanofiber membrane for oil-containing wastewater treatment34
Optimisation lignin core-shell structures for sodium-ion batteries33
Optimization for testing conditions of inverse gas chromatography and surface energies of various carbon fiber bundles33
Li-IL@CuBTC-enhanced PEO composite polymer electrolytes for solid-state lithium batteries33
Electrospun and electropolymerized carbon nanofiber–polyaniline–Cu material as a hole transport material for organic solar cells33
Recent progress of covalent organic frameworks as catalysts for green and renewable fuel production32
Effects of micropore size of activated carbon fibers prepared by steam activation on toluene adsorption32
Customized carbon composite nanomaterials for the mitigation of emerging contaminants: a review of recent trends32
Cashew Nut Shell–derived activated carbon/MWCNTs composite electrodes for enhanced Supercapacitor performance32
Comprehensive review: challenges, strategies, and prospects of brazing fillers for joining carbon-carbon composites with self and other materials32
Carbon nanotubes for high-performance energy storage devices31
Fast-charging natural graphite anodes: synergistic effects of optimized spheronization and TLE-tailored pitch coating31
Preparation and properties of self-healing polyurethane based on disulfide and hydrogen bonding31
Synthesis of few-layer graphene through simultaneous ultrasonication and electrochemical exfoliation in a Bronsted acidic ionic liquid [NMP] [HSO4] aqueous electrolyte for NH3 vapor sensing30
Prediction of mechanical properties in graphene-reinforced aluminum nanocomposites using machine learning and molecular dynamics simulations30
Biased dual-exfoliation technique with expanded graphite for high-quality few-layer graphene sheets in electrochemical exfoliation30
Linear negative temperature coefficient effect exhibited by highly flexible thermosensitive film from N-Doped rGO/TPU composites30
Luminescent bioplastic nanocomposite based on N, K, Ca-doped carbon quantum dots derived from ice plant flower extract for applications in quantum dot-based optical displays29
Treatment of textile dye consortium through photo-electro-fenton process using graphite-Ti electrode system and toxicity studies29
Statistical analysis of the synthesis of carbon nanotubes using wet-impregnated catalysts for improved robustness29
Effect of mesophase formation from quinoline insoluble-containing coal tar pitch on physical properties of carbon blocks29
Decoupling crystallinity from thermal stability: revisiting thermal resistance of PAN-based high modulus carbon fibers28
Enhanced vermicomposting of Sesbania bispinosa through carbonaceous biochar amendment for nutrient-rich vermicompost production28
Hybrid capacitive deionization system for short-chain perfluoroalkyl substances (PFAS) removal using activated carbon composite and Nafion-coated prussian blue electrodes28
Fe-Doped RuS2 nanodots/MWCNT electrodes for dual detection of xylazine and erythrosine: experimental and computational insights28
Experimental study on flotation of graphite with inorganic electrolytes solution28
Sizing-agent control of the high-focusing and spread-ability of a melt-spun polyacrylonitrile-based carbon fiber and its interfacial shear strength27
Enhancing cancer biomarker identification: precise monitoring of MUC1 using V2C/Au nanocomposite-amplified electrochemical biosensor27
Fluorescence resonance energy transfer-based sensor with silver-conjugated orange peel waste-derived carbon dots for melamine detection27
Acid treatment enhances performance of beads activated carbon for formaldehyde removal27
2D/2D composites based on graphitic carbon nitride and MXenes for photocatalytic reactions: a critical review26
Electrochemical field-effect bio-transistor based on a multi-scale electronic nanomesh of single-walled carbon nanotubes25
Core–shell ZIF-67(Co) wrapped CuO as high efficient peroxymonosulfate catalyst for the degradation of methylene blue25
Electrochemical and physical adsorption properties of activated carbon with ultrahigh specific surface area using 2,9-dimethyl quinacridone (2,9-DMQA)25
Effect of Pt clusters on hydrogen adsorption behaviors of cup-stacked carbon nanotubes: a DFT study25
Synergistic enhancement of thermal conductivity and electromagnetic interference shielding in Ag foam and short carbon fiber-reinforced phase change composites24
Fabrication of flexible nitrogen-doped graphene micro-supercapacitors by laser-induced self-made precursors24
Data analytics approach to evaluating the impact of acetylene and ethylene precursors on the crystallinity of carbon nanotubes synthesized in a fluidized bed reactor24
Unveiling trends and insights: a bibliometric analysis of nickel-based electrocatalysts for the valorization of HMF to FDCA23
Research progress on perovskite solar cells based on organic carbon electrodes23
Investigation of electromagnetic interference shielding effectiveness and electrical percolation of carbon nanotube polymer composites with various aspect ratios23
Sugarcane bagasse-derived biochar enables high-efficiency methylene blue separation from waste effluent23
Sustainable ibuprofen degradation using eco-friendly CQDs/TiO2 nanocomposites from banana peels waste22
Removal of aqueous arsenic (III) by graphene-based systems at micro-trace level22
Porous nitrogen-doped carbon nanosheets composite Fe3C synthesized by molten salt-mediated template method as efficient ORR catalyst for zinc-air batteries22
Transparent and flexible carbon dots/polymer scaffold for deep UV photodetection applications22
Mechanical properties of polycaprolactone bone scaffolds reinforced with carbon nanotube-modified tricalcium phosphate22
Process optimization, kinetic, and thermodynamic studies of biodiesel production using KOH-modified bio-carbon catalyst derived from marine macroalgae21
Density functional theory insights into decorated, doped, and defective graphene as a model system for understanding hydrogen storage in carbon materials21
Determination of the antibacterial activity of various metal-doped carbon quantum dots21
Temperature effects on the properties of solid carbon from natural gas pyrolysis in molten tin21
Influence of sulfur promoter on electrical conductivity in direct-spun carbon nanotube fibers21
Enhanced electrochemical performance of FeSe2@rGO composites as anode materials for Lithium-ion batteries21
Hard carbon anode from sodium lignosulfonate-formaldehyde resin for sodium-ion batteries21
Synthesis, characterization and evaluation of porous carbon adsorbents derived from waste biomass for CO2 capture21
Microstructure and properties of copper matrix composites reinforced with Cu-doped graphene21
Modified screen-printed electrochemical biosensor design compatible with mobile phones for detection of miR-141 used to pancreatic cancer biomarker21
Synergistic enhancement of low-grade flake graphite flotation via ultrasonic cavitation and ionic-strength modulation20
The detection of toxic gases (CO, FN3, HI, N2, CH4, N2O, and O3) using a wearable Kapton–graphene biosensor for environmental and biomedical applications20
One-pot synthesis of homogeneous carbon quantum dots/aluminum hydroxide composite and its application in Cu(II) detection20
Performance study of g-C3N4/carbon black/BiOBr@Ti3C2/MoS2 photocatalytic fuel cell for the synergistic degradation of different types of pollutants20
Properties, assembly and characterization of carbon nanotubes: their application in water purification, environmental pollution control and biomedicines—a comprehensive review20
Electrochemical surface modification of carbon: a highly active metal-free electrocatalyst for hydrogen evolution reaction20
Microwave-DES activation of poplar-derived ultramicroporous carbon for efficient CO2/N2 separation with extremely high pore utilization rate20
Mineralization of oxalic acid by underwater non-thermal plasma: TOC removal and 13C isotope tracer19
Correlation between graphite morphology and interparticle space affecting rate performance in Li-ion battery anodes19
Development and evaluation of machine-learned interatomic potentials for carbon nanotubes for molecular dynamics simulations19
Development of petroleum pitch/polymer composite binder for anode material of the lithium-ion battery19
Effect of electron beam irradiation on durian-peel-based activated carbon for phenol removal19
Effects of mass and heat transfer on the development of microcrystalline structure of mesophase pitch and the properties of derived carbon fibers19
Preparation and application of graphene oxide nanocomposites loaded with enzymes and liposomes19
Determination of bortezomib and dasatinib anticancer drugs in real samples using an electrochemical sensor modified with new CuFe2O4/SmVO4/ionic liquid nanocomposite19
Microstructure and tribological properties of ion beam-modified GO-reinforced copper matrix composites18
Preparation and properties of NFG-based composites synergistically regulated by MCMB and SG18
Inner filter effect-based highly sensitive quantification of 4-nitrophenol by strong fluorescent N, S co-doped carbon dots18
An environmentally friendly and simple method for producing multi-layer exfoliated graphene in mass production from pencil graphite and its utilization for removing cadmium from an aqueous medium18
Co2+-coordination-assisted enhancement of mechanical and iodynamic properties of 3D graphene-based double network hydrogels for all-solid-state supercapacitors18
Preparation and electrochemical characteristics of waste-tire char-based CFX for lithium-ion primary batteries18
Research progress of carbon nanotubes as anode materials for lithium-ion batteries: a mini review18
Study on the controlled release properties of modified multi-walled carbon nanotubes on sulforaphane18
Synthesis of durian shell-based carbon dots and its application in the detection of $${\text{MnO}}_{4}^{ - }$$and $${\text{Cr}}_{{2}} {\text{O}}_{7}^{2 - }$$18
Synthesis and antitumor efficacy of biodegradable hollow mesoporous carbon nanocarriers18
Ultrasonication-assisted fabrication of MnFe2O4@TiO2@MWCNTs ternary nanocomposite for enhanced supercapacitor applications18
Hierarchical bimetallic nanoparticles embedded nitrogen-doped carbon derived from ZIF-67 composites for efficient electrochemical nitrite sensing18
Iron-nickel-based catalyst as efficient electrocatalyst for hydrogen evolution reaction18
Iodine-free carbon cathodes for aqueous zinc–iodine batteries with supercapacitor-level rate performance17
Water-soluble photoluminescent carbon dots prepared from phloroglucinol by catalyst- and solvent-free reaction17
The mesopore development of the activated carbon from coconut husk via flow-through fractionation and superheated steam activation for dye and metal adsorption17
Investigating the effect of microwave growth parameter regulation in the growth and thermoelectric properties of zinc oxide nanorods/carbon fabric for wearable thermoelectric application17
The coconut shell-derived porous carbon supported hollow spherical ZnFe2O4 as an efficient electromagnetic wave absorption material17
Lightweight flower-like nitrogen-doped carbon materials achieve efficient electromagnetic wave absorption17
Synthesis of carbon materials with extremely high pyridinic-nitrogen content and controlled edges from aromatic compounds with highly symmetric skeletons16
Porous heterostructure of h-BN/carbon as an efficient electrocatalyst for hydrogen peroxide generation16
Arginine-polyaniline@g-C3N4 for outstanding retention of Orange G dye from water16
AlN-PVDF composite protective coating for stabilizing lithium metal anodes in lithium metal batteries16
Structural modulation of graphene–polyimide interfaces below pyrolysis temperature under electrothermal treatment16
Recent advances in activated carbon fibers for pollutant removal16
Preparation of high specific surface area activated carbon using residual oil and waste PET16
Evolution of the understanding of quantum capacitance through advancements in graphene-related carbon materials16
Research progress and the prospect of CO2 hydrogenation with dielectric barrier discharge plasma technology15
Investigation of the effect of catalyst type, concentration, and growth time on carbon nanotube morphology and structure15
Application of modified graphite felt as electrode material: a review15
Stabilizing silicon anodes via high-entropy alloying and hierarchical carbon encapsulation for high-performance lithium-ion batteries15
Evolution of nitrogen functionalities in PAN-based carbon fiber during KOH activation to understand the formation of pore structure15
Correction to: Revealing the effect of graphite source on the properties of synthesized graphene oxide15
Nitrogen and phosphorous co-doped carbon nanotubes for high-performance supercapacitors15
Towards a high energy density asymmetric supercapattery: binary metal MOF-derived Co–Mn/rGO as cathode materials15
Leveraging petroleum-derived carbon for atmospheric water harvesting15
Expanded graphite-confined bimetallic sulfide heterostructure enables high-capacity and long-life lithium-ion batteries15
Carbon-based microelectrodes for environmental remediation: progress, challenges and opportunities15
Investigating structural disparities in carbon nanoribbons and nanobelts through spectroscopies15
Construction of polylactic acid-based flame retardant composites by zinc oxide and bamboo carbon15
Analysis of spinnable mesophase pitch in terms of lyotropic liquid crystalline solution15
Cavity miniaturization and cluster interconnectivity enable high-capacity and fast-charging hollow carbon for lithium-ion battery anodes15
Influence of post-heat treatment over structural network and mechanical properties of carbon (C)-incorporated CVD TiCN thin-film coating15
Correction to: Carbon-based materials in proton exchange membrane fuel cells: a critical review on performance and application15
Influence of graphite platelets with and without SiC on the densification and fracture toughness of ZrB2 ceramic sintered by SPS14
A review of carbon-based materials and their coating techniques for biomedical implants applications14
Tungsten-based activated carbon matrix for the catalytic oxidation of model volatile organic compounds (VOCs) and pharmaceutical VOCs from wastewater14
Influence of carbon fibers on interfacial bonding properties of copper-coated carbon fibers14
Fabrication of graphene-assisted voltammetry platform for the detection of nitrate ions in PM2.514
Revealing the charge transfer mechanism in Er ion-doped Bi4O5Br2/g-C3N5 nanocomposite for efficient photocatalytic degradation of antibiotic tetracycline14
A dual-mode fluorescent probe for temperature-sensing and metal ions detection based on castor leaves-derived carbon quantum dots14
Mild purification of multiwalled carbon nanotubes with increased selectivity for carbon impurity and residual metal removal14
Tribological behavior of friction stir process surface hybrid composite AA5083/MWCNT/Al2SiO5 using multi-quadratic RBF algorithm14
In-situ hydrogen-reduced red mud/apple peel biochar with highly loaded nZVI for efficient removal of organic pollutants14
A simple electrospinning strategy to achieve the uniform distribution of ultra-fine CoP nanocrystals on carbon nanofibers for efficient lithium storage14
Plasma-engineered kenaf-derived hard carbon with fluorine–oxygen synergy for kib anodes14
Pd–Fe bimetallic nanoparticles anchored on N-doped carbon-modified graphene for efficient catalytic organic reactions14
A comparative study on metal species implanted amine–brookite–TiO2 nanorods for enhanced photocatalytic CO2 reduction14
The effect of non-polar solvent on the structural properties and electrochemical performance of LiFePO4/C cathode materials synthesized by solid-state reaction14
Immobilization of molybdenum disulfide nanoparticles onto metal–organic framework-derived carbon nanotubes and carbon cloth templates for flexible sodium-ion battery anodes14
Copper nanoparticles supported on biocarbon film from Sargassum spp. and its electrochemical activity in reducing CO214
Bromine-doped carbon dot: concentration-dependent multicolor emission, nanozyme activity, and visible-light-induced photodynamic bacterial inactivation13
A study on the development of C-dots via green chemistry: a state-of-the-art review13
Modification of graphite-based composite bipolar plates by “nanoglue” strategy for vanadium redox flow battery13
Ultra-high sensitivity electrochemical aptamer biosensor based on a carbon nano-confined interface for the detection of aflatoxin B1 in traditional chinese materia medica decoction pieces13
Carbonization temperature dependent structural modifications of waste coffee grounds derived hard carbons and their electrochemical behaviors as anode materials for sodium ion batteries13
Synthesis of heteroatoms doped reduced graphene oxide for the electrochemical determination of uric acid in commercial milk13
A sandwich-like CMC-based/graphene/CMC-based conductive agent prepared from needle coke for high-performance LiFePO4 batteries13
Tri-metallic (Ni–Ce–Cu)-based metal–organic framework for highly efficient electrochemical detection of l-cysteine13
Coffee grounds derived sulfur and nitrogen dual-doped porous carbon for the cathode material of lithium‑sulfur batteries13
Enhancement of anticorrosion performance of epoxy coatings with exfoliated graphite nanoplatelets and functionalized graphene13
Oxidation behaviour and residual mechanical properties of carbon/carbon composites13
Chitosan/graphene oxide/gelatin (CS/GA/GO) hybrid fiber with enhanced tensile strength and photothermal conversation efficiency13
Nano-engineered prepreg manufacturing: control of capillary rise of resin into VACNTs’ forests13
Machine learning model prediction of CO2 production and resource utilization of commercial concrete: curing utilization mechanism, carbon emission assessment and visualisation analysis13
Waterborne polyurethane toughened carbon nanotube paper with excellent Joule heating properties and strain-sensing potential13
Advancing building management with nano-enhanced carbon materials: a machine learning-driven business and economic analysis13
Photoanode modified with nanostructures for efficiency enhancement in DSSC: a review13
Stretchable graphene conductor based on fluid dynamics and its application to flexible conductometric sensor12
Facile co-pyrolysis synthesis of nano si-anisotropic C composite anodes with controlled silicon dispersion for high-performance lithium-ion batteries12
Thermophysical properties of Cu-coated carbon fibers reinforced aluminum matrix composites by stir casting12
Development of a graphene-based bimetallic catalyst for enhanced voltammetric detection of sulfafurazole antimicrobial agents12
Control of the properties of a binder pitch to enhance the density and strength of graphite blocks12
Two-dimensional MXene@ZIF-8 hybrid-derived TiO2/TiN@N-C heterostructure as an emerging material for electrochemical sensing12
CNT–PDMS film-based flexion sensor for examining physical activity in humans12
Platinum-decorated biochar from pequi tree bark as a sustainable catalyst for hydrogen production from ammonia borane12
Structural, optical and photovoltaic properties of V2O5/ZnO and reduced graphene oxide (rGO)-V2O5/ZnO nanocomposite photoanodes for dye-sensitized solar cells12
One-step copper electroplating of carbon nanotube buckypaper using optimized electrolyte with additive chemicals12
A combined experimental and molecular modelling study on fixed bed adsorption of carbon dioxide over activated carbon12
In situ construction of lightweight CF/CNTs with compatible thermal performance toward sandwich structures for hypersonic vehicles12
Preparation of polyimide-based activated carbon fibers and their application as the electrode materials of electric double-layer capacitors12
N, S co-doped fluorescent carbon dots synthesized by microwave irradiation: a sensitive probe for Pb (II) ions detection in food samples12
The fluorescent and colorimetric dual-response sensor based on carbon dots doped with nitrogen and sulfur for detecting copper ions12
Fluorometric sensing probe using carbon quantum dots for selective detection of doxycycline antibiotic12
Easily prepared graphene-modified melamine sponge and its solar-aided adsorption performance on viscous oil12
Efficient hydrogen generation from the NaBH4 methanolysis by waste material: banana peel12
Electrochemical performance of microporous carbons derived from oak wood for electric double-layer capacitor11
Mechanical and microstructural properties of ultrafine slag cement mortar reinforced with graphene oxide nanosheets11
Performance of CNT-CNP aerogel as electrode in capacitive deionization system11
A glassy carbon electrode modified with a composite consisting of electrodeposited chitosan and carboxylated multi-walled carbon nanotubes for simultaneous voltammetric determination of dopamine, sero11
Nitrogen-rich self-doping modified porous carbon material as a CDI electrode for brine desalination11
Synthesis of nickel–manganese sulfide decorated with reduced graphene oxide nanocomposite for ultra-fast photocatalytic degradation of organic dye molecules11
Comparative analysis of Aurantii Fructus Immaturus and Aurantii Fructus via graphene-assisted electrochemical chemometrics11
Preparation of high surface area carborundum-supported cobalt catalysts for hydrogen production by ammonia decomposition11
Effects of electrodes type and design on electrical stability of conductive cement as exposed to various weathering conditions11
Waste plastic-derived FWCNT-NiMgAl composite for supercapacitor application11
Recent progress of low-loaded platinum on well-functionalized carbon electrocatalysts for oxygen reduction reaction11
Investigation on thermal conductivity of dimethyl silicone oil modified by graphene nanosheets11
Study on thermal conversion behaviors of ethylene tar pitch11
Flexible self-supporting laser-induced graphene electrode devices for highly sensitive electrochemical analysis of Allura Red11
Directly integrated hierarchical 3D porous graphene/silicon Schottky photodetectors for self-powered operation11
Evaluation of the catalytic and antioxidant activity of in situ green synthesized graphene-gold nanocomposite11
Polyethylene based hollow porous carbon by facile method for KIB anode material11
Janus-Wettability electrode with porous PVA-PDMS interface for enhanced ion transport and high-performance supercapacitor10
Correction: Fluorescent microspheres of zinc 1,2-dicarbomethoxy-1,2-dithiolate complex decorated with carbon nanotubes10
Transforming excitation-dependent green to independent yellow emission in citric acid-derived carbon dots via melamine addition for high-performance warm pc-LEDs10
Tribological behavior and mechanism of polyamide particles in urea-based grease at different temperatures10
Porous carbon from polyvinylidene chloride or polyvinylidene fluoride with ZnO, Mg(OH)2, and KOH for supercapacitor10
Achievement of an efficient oxygen reduction electrocatalyst based on carbon boosted with MnOx/MnCo2O4 with excellent electrocatalytic activity in neutral media10
Preparation of superparamagnetic AC/Fe3O4/TiO2 nanoparticles from magnetic waste oily petroleum sludge (MWOPS): comprehensive characterization, H2 production, design batch photoreactor, and treatment 10
Effect of metal–support interaction in Ni/SiO2 catalysts on the growth of carbon nanotubes by methane decomposition10
Urea-assisted N-type conversion of laser-induced graphene for thermoelectric applications10
Electrostatic self-assembly cellulose nanofibers/MXene/nickel chains for highly stable and efficient seawater evaporation and purification10
Predicting the wear performance of graphene and silicon nitride reinforced aluminium hybrid nanocomposites using artificial intelligence approach10
Characterization of high-temperature heat-treated bamboo-based white charcoals for lithium ion battery electrode10
High-performance cement with minimal graphene content enabled by improved dispersion through cellulose nanofibers10
Fast fluorescent blood sugar sensing using phenylboronic acid functionalized N, S-doped carbon dots10
A high frequency insulated gate bipolar transistor (IGBT) structure using carbon nanotube vacuum field emission transistor10
A beaded g-C3N4/CoFe2O4 nanofibers for efficient adsorbing and catalytical degrading multiple pollutants10
Butane working capacity of highly mesoporous polyimide-based activated carbon fibers10
Study on co-carbonization characteristics and thermal conversion kinetics of medium- and low-temperature and high-temperature refined pitch10
Noble metals functionalized reduced graphene oxide as an efficient optical limiter: a combined experimental and theoretical investigation10
Correction: Recent developments in the application of carbon-based nanomaterials in implantable and wearable enzyme-biofuel cells10
In situ co-deposition-enabled hierarchical pores in Ni–Co–Zn ferrite/carbon derived from biomass composites with adaptive electromagnetic wave absorption10
An electrochemical immunosensor based on a graphene/multi-wall carbon nanotube composite platform for the detection of cardiovascular marker C-reactive protein10
Environmental sustainability through the utilization of seashell wastes in the development of MWCNT-reinforced nylon 66 composites10
Effect of introduction of graphene nanoplatelets (GNPs) on the microstructure, mechanical properties, and wear resistance of FeCoNiCuAl particles reinforcing aluminum matrix composites via friction st10
Synergistic design of intra- and inter-laminar fiber hybridization and axial yarn reinforcement in carbon/glass hybrid braided tubes10
Enhanced pursuance of dye-sensitized solar cell for indoor and outdoor stability using reduced graphene oxide @ Mn2O3 nanocomposite10
Construction of metal-free heteroatoms doped carbon catalysts with certain structure and properties: strategies and methods10
Development of a nitrogen-doped carbon nanotube nanogenerator for mechanical energy harvesting10
Carbon dynamics in agricultural greenhouse gas emissions and removals: a comprehensive review10
Substrate effect on phonon in graphene layers10
0.79305720329285