European Journal of Environmental and Civil Engineering

Article	Citations
Properties prediction of environmentally friendly ultra-high-performance concrete using artificial neural networks	43
Compressive strength of geopolymer concrete composites: a systematic comprehensive review, analysis and modeling	41
ML-EHSAPP: a prototype for machine learning-based earthquake hazard safety assessment of structures by using a smartphone app	29
Experimental and empirical evaluation of strength for sustainable lightweight self-compacting concrete by recycling high volume of industrial waste materials	25
Challenges and perspectives in designing engineering structures against debris-flow disaster	25
Effects of natural zeolite and sulfate environment on mechanical properties and permeability of cement–bentonite cutoff wall	24
Estimation of the compressive strength of green concretes containing rice husk ash: a comparison of different machine learning approaches	23
Effects of alternative ecological fillers on the mechanical, durability, and microstructure of fly ash-based geopolymer mortar	22
Displacement prediction of water-induced landslides using a recurrent deep learning model	19
Behavior of concrete incorporating waste plastic as fine aggregate subjected to compression, impact load and bond resistance	19
Optimizing protocols for microbial induced calcite precipitation (MICP) for soil improvement–a review	19
Study of the effect of construction techniques on the seismic capacity of ancient dry-joint masonry towers through DEM	19
Durability performance evaluation of green geopolymer concrete	19
Eco-friendly and cost-effective concrete utilizing high-volume blast furnace slag and demolition waste with lime	18
Analytical solution for one-dimensional nonlinear consolidation of double-layered soil with improved continuous drainage boundary	18
Comparative analysis of soft computing techniques in predicting the compressive and tensile strength of seashell containing concrete	16
Bearing capacity of strip footing on rock under inclined and eccentric load using the generalized Hoek-Brown criterion	15
Life cycle assessment of lightweight concrete containing recycled plastics and fly ash	15
Excavation induced over pore pressure around drifts in the Callovo-Oxfordian claystone	15
A review on recycled concrete aggregates (RCA) characteristics to promote RCA utilization in developing sustainable recycled aggregate concrete (RAC)	14
Investigation on the strength, durability and swelling of cement- solidified dredged sludge admixed fly ash and nano-SiO2	14
Failure modes of slope stabilized by frame beam with prestressed anchors	14
Damage behaviours of new-to-old concrete interfaces and a damage prediction model of reinforced concrete	13
Nonlinear structural performance and seismic fragility of corroded reinforced concrete structures: modelling guidelines	13
Mechanical characteristics of PET fibre-reinforced green ultra-high performance composite concrete	13

Application of computational intelligence and statistical approaches for auto-estimating the compressive strength of plastic concrete	13
Characterization of mechanical behavior of binary granular assemblies through the equivalent void ratio and equivalent state parameter	13
Effects of elevated temperatures on the properties of ground granulated blast furnace slag (GGBFS) based geopolymer concretes containing recycled concrete aggregate	12
Hydraulic pressure effect on mechanical properties and permeabilities of layered rock mass: an experimental study	12
Neural network-based optimization of fibres for seismic retrofitting applications of UHPFRC	12
Flexural behavior of environmentally friendly ultra-high-performance concrete with locally available low-cost synthetic fibers	12
Friction and maximum dilatancy angles of granular soils incorporating low plastic fines and depositional techniques effects	12
Bearing capacity-relative density behavior of circular footings resting on geocell-reinforced sand	11
Behaviour of RC beams strengthened with FRP strips under combined action of torsion and bending	11
Hydrodynamic landslide displacement prediction using combined extreme learning machine and random search support vector regression model	11
Bond properties between smooth carbon fibre-reinforced polymer bars and ultra-high performance concrete modified with polymeric latexes and fibres	11
Reusing plastic waste in the production of bricks and paving blocks: a review	11
Detailed amount of particle breakage in multi-sized coral sands under impact loading	11
Study on seismic failure probability of high earth-rock dam considering dam body deformation and slope stability	11
Improvements in mechanical and durability parameters of bio-engineered concrete with metakaolin as a partial substitute for cement	11
Influence of joint angle on the instability failure characteristics and AE evolution law of underground caverns	11
Tree-based nonlinear ensemble technique to predict energy dissipation in stepped spillways	11
Application of load transfer method for bored pile in loess area	11
Properties of sustainable self-compacting concrete made with rice husk ash	11
Numerical study on the bearing capacity of strip footing resting on partially saturated soil subjected to combined vertical-horizontal-moment loading	10
Mechanism of valley narrowing deformation during reservoir filling of a high arch dam	10
Effect of graphite tailings as substitute sand on mechanical properties of concrete	10
Probabilistic characteristics analysis for the time-dependent deformation of clay soils due to spatial variability	10
Physical and mechanical properties of metakaolin-based geopolymer mortars containing various waste powders	10
Mechanism, influencing factors and research methods for soil desiccation cracking: a review	10
Stability of glassy concrete under elevated temperatures	10
Properties of metakaolin-based green pervious concrete cured in cold and normal weather conditions	10
Effect of abrasion and chemical treatment of recycled aggregate on the workability, strength, and durability properties of concrete	10
Recent advances in blended alkali-activated cements: a review	9
Bearing capacity of ring footings placed on dense sand underlain by a loose sand layer	9
Influence of treated bio-fibers on the mechanical and physical properties of cement mortars	9
Laboratory and centrifugal model tests on failure mechanism of canal slopes under cyclic action of wetting–drying	9
Flexural behavior of reinforced concrete beam using CFRP hybrid system	9
Temperature-dependent lateral earth pressures in partially saturated backfills	9
Mechanical properties and dynamic constitutive relation of lightweight shale ceramsite concrete	9
State of the art on the mechanical properties of pervious concrete	9
A framework for coupled hydro-mechanical continuous modelling of gap-graded granular soils subjected to suffusion	9
The mechanism of alkali-aggregate reaction in concrete/mortar and its mitigation by using geopolymer materials and mineral admixtures: a comprehensive review	8
Sound absorbing porous concretes composed of different solid wastes	8
Numerical investigation on effect of confining pressure on the dynamic deformation of sandstone	8
Solutions for lined circular tunnels sequentially constructed in rheological rock subjected to non-hydrostatic initial stresses	8
Permeation-durability properties of metakaolin blended concrete containing rubber	8
Predicting changes in the mechanical properties of frozen saline soils	8
Experimental study on mechanical properties of multi-layered rock mass and statistical damage constitutive model under hydraulic-mechanical coupling	8
Investigation of the properties and technologies of epoxy asphalt concrete preparation with the addition of fiber from fly ash of thermal power plants	8
Properties of natural pozzolan-based geopolymer concrete: effects of natural pozzolan content, type of alkaline activator, and silicate/alkali ratio	8
Numerical analysis on rock blasting damage in Xiluodu underground powerhouse using an improved constitutive model	8
Effects of recycled tyre rubber and steel fibre on the impact resistance of slag-based self-compacting alkali-activated concrete	8
Review on key issues in centrifuge modeling of flow-structure interaction	8
Investigating impacts of deep foundation pit dewatering on land subsidence based on CFD-DEM method	8

A novel true triaxial test device with a high-temperature module for thermal-mechanical property characterization of hard rocks	8
Crack healing in concrete by microbially induced calcium carbonate precipitation as assessed through electromechanical impedance technique	8
Improving corrosion resistance of reinforcement steel rebars exposed to sulphate attack by the use of electroless nickel coatings	8
Application of ANN-PSO algorithm based on FDM numerical modelling for back analysis of EPB TBM tunneling parameters	8
Novel bond-slip model between concrete and angular CFRP fan type anchoraged CFRP strip	7
Laboratory investigation of cemented silt improved with bentonite and phosphogypsum in DCM walls	7
Comparative life cycle assessment (LCA) of concrete mixtures: a critical review	7
Ground reaction curve of a circular tunnel considering the effects of the altered zone and the self-weight of the plastic zones	7
Effect of type and volume fraction of recycled-tire steel fiber on durability and mechanical properties of concrete	7
Nonlinear models to predict stress versus strain of early age strength of flowable ordinary Portland cement	7
Large strain dynamic characteristics of quaternary alluvium sand with emphasis on empirical pore water pressure generation model	7
Biochar as a cost-effective and eco-friendly substitute for binder in concrete: a review	7
Experimental and analytical study of passive earth pressure behind a vertical rigid retaining wall rotating about base	7
Experimental study of polypropylene fibre-reinforced clay soil mixed with municipal solid waste incineration bottom ash	7
Performance evaluation of sustainable geopolymer concrete produced from ferrochrome slag and silica fume	7
Using a hybrid artificial intelligence method for estimating the compressive strength of recycled aggregate self-compacting concrete	7
Effects of fiber addition on performance of high-performance alkali activated slag concrete mixes: An experimental evaluation	7
Properties of geopolymer mortars derived from ground calcined perlite and NaOH solution	7
Performance of a top-down excavation in shanghai: case study and numerical exploration	7
Instability analysis of a quaternary deposition slope after two sudden events of river water fluctuations	7
Effect of the proximity of slope and pile shape on lateral capacity of piles in clay slopes	7
Improvement of bonding between synthetic fibers and a cementitious matrix using recycled concrete powder and plasma treatment: from a single fiber to FRC	7
Relation between rheological and mechanical properties on behaviour of self-compacting concrete (SCC) containing recycled plastic fibres: a review	7
Experimental and numerical investigation of seismic retrofitting of RC square short columns using FRP composites	7
Effects of blending manufactured sand and offshore sand on rheological, mechanical and durability characterization of lime-cement masonry mortar	7
Free desiccation shrinkage process in clayey soils	6
The effects of lime, bentonite and nano-clay on erosion characteristics of clay soils	6
Experimental study of liquefaction resistance: effect of non-plastic silt content on sand matrix	6
Mechanical properties and environmental impact of rubberized fly ash- and red mud-based geopolymer concrete	6
Fluid migration in faulted shale rocks: channeling below active faulting threshold	6
Experimental study on the process of overtopping breach of concrete-faced sand-gravel dam	6
Consolidation theory of homogeneous multilayer treatment by air-boosted vacuum preloading	6
A method for calculating the ultimate bearing capacity of uplift piles in combined soil and rock mass	6
Mechanical and durability properties of slag/fly ash based alkali-activated concrete reinforced with steel, polypropylene and polyamide fibers	6
Equilibrium, kinetic and hydraulic study of different Indian bentonites in presence of lead	6
Examination of particle shape on the shear behaviours of granules using 3D printed soil	6
Sustainable lightweight mortar using biochar as sand replacement	6
Tensile properties of bamboo strips and flexural behaviour of the bamboo reinforced concrete beams	6
Investigation of influencing factors for valley deformation of high arch dam using machine learning	6
Consideration of maximum impact force design for a rock shed against dry granular flow	6
Two-phase analytical model of seepage during grout consolidation around shield tunnel considering the temporal variation in viscosity and the infiltration effect	6
Effect of partial drainage on the pullout behaviour of a suction bucket foundation	6
Analytical solutions for consolidation of composite ground improved by composite columns with circular and non-circular cross sections	6
Numerical study on crack propagation of rock mass using the time sequence controlled and notched blasting method	6
A new index for the strength analysis and prediction of cement-mixed soils	6
Combination effect of limestone filler and slag on hydration reactions in ternary cements	6
Experimental study of energy and frequency characteristics of acoustic emissions induced from tensile and shear cracks in tunnel rockburst process	5
Correlation between valley deformation and water level fluctuations in high arch dam	5
Environmental influence on bacterial efficiency in ensuring self-healing mortars	5
Analysis of suspension bridges in construction and completed status considering the pylon saddles	5
Phase field characteristic of multizone hydraulic fracturing in porous media: the effect of stress boundary	5
Bio-fiber reinforced roller compacted concrete designed for road construction: feasibility of date palm fibers in pavements	5
Influence of alkali activators on thermo-physical properties of ecofriendly unfired clay bricks from anthill mounds	5
The effectiveness of rubber short fibers reinforcing on mechanical characterization of clay adobe elements under static loading	5
Optimization of dune sand-based mixture material for pavement design	5
Transport property evolution during hydrostatic and triaxial compression of a high porosity sandstone	5
Experimental study of fracture geometry characteristics on rock mass strength and crack propagation evolution law	5
Effectiveness of using Metakaolin and fly ash as supplementary cementitious materials in pervious concrete	5
Closed-form solutions for large strain analysis of cavity contraction in a bounded Mohr-Coulomb medium	5
Experimental study on the acoustic emission response and permeability evolution of tunnel lining concrete during deformation and failure	5
Influences of low fines content and fines mixing ratio on the undrained static shear strength of sand–silt–clay mixtures	5
A simplified approach to estimate settlements of earth embankments on piled foundations: the role of pile shaft roughness	5
3D centrifuge and numerical modelling of lateral responses of a vertical loaded pile group to twin stacked tunnels	5
Mechanical and microscopic properties of alkali-activated fly-ash-stabilised construction and demolition waste	5
Numerical simulation of non-cohesive homogeneous dam breaching due to overtopping considering the seepage effect	5
Calibrating partial safety factors in line with required reliability levels for concrete structures	5
Effectiveness of henna leaves extract and its derivatives as green corrosion inhibitors of reinforcement steel exposed to chlorides	5
Ambient cured high calcium fly ash geopolymer concrete with dolomite powder	5
Experimental study on the shear mechanical properties of the cemented soil–concrete interface	5
Load-sharing mechanism of piled-raft foundation: a numerical study	5
Effect of slab stiffness on the geotechnical performance of energy piled-raft foundation under thermo-mechanical loads	5
Assessment of properties of mortars modified with sugarcane bagasse ash processed by heating at different temperatures as cement replacement	5
Upper bound kinematic approach to seismic bearing capacity of strip foundations resting near rock slopes	5
Model study on backfill grouting in shield tunnels based on fractal theory	5
Bearing capacity of single stone column in clay using finite element limit analysis	5
Behaviour of heat damaged repaired reinforced SCC cantilever beam using carbon fiber reinforced polymer rope	5
Effect of the addition of electric arc furnace dust on the mechanical properties and carbonation performance of concrete	5
Hybrid finite–discrete element modelling of rock fracture process in intact and notched Brazilian disc tests	5
Liquefaction study of soils in unified model and liquefaction potential evaluation of compacted sand	5
Influence of component damage on the mechanical performance of bracket set joints in ancient timber structures	4

Dynamic elastic modulus of Xianyang loess based on microscopic analysis: a qualitative evaluation	4
The critical behaviour of finite thickness lining systems in tunnels	4
Influence of styrene-butadiene rubber and pretreated hemp fibers on the properties of cement-based repair mortars	4
Theoretical analysis of the shield tunnel face stability in dry sandy strata	4
Characteristics of unloading damage and permeability evolution of sandstone under hydro-mechanical coupling	4
Study on the use of lightweight expanded perlite and vermiculite aggregates in blended cement mortars	4
Mechanical behaviour and damage evolution of Beishan granite considering the transient and time-dependent effects of excavation unloading	4
Influence of GGBFS and silica fume on characteristics of alkali-activated Metakaolin-based concrete	4
Insight into the partial replacement of cement by ferronickel slags from New Caledonia	4
A closed-form hydraulic-mechanical coupling solution of a circular tunnel in elastic-brittle-plastic rock mass	4
Mechanical performance and corrosion resistance of reinforced concrete with marble waste	4
Evaluation of the sulphate resistance of foamed concrete containing processed spent bleaching earth	4
Large-scale triaxial experiments on the static and dynamic behavior of an artificially cemented gravel material	4
Shear behavior of reinforced concrete beams incorporating waste glass powder as partial replacement of cement	4
A simplified geopolymer concrete mix design considering five mineral admixtures	4
A dynamic Gaussian process surrogate model-assisted particle swarm optimisation algorithm for expensive structural optimisation problems	4
Top challenges to widespread 3D concrete printing (3DCP) adoption – A review	4
Drying experiment on rammed earth structure	4
Experimental investigation and analysis of pure bending plastic hinge zone in hybrid beams reinforced with high reinforcement ratio under static loads	4
Effect of slightly cadmium-enriched kenaf straw on the mechanical and thermal properties of cement mortar	4
Experimental and analytical investigations on the failure modes of concrete sandwich panels under axial compression	4
A complex slide-buckling-toppling failure of under-dip soft rock slopes	4
Residual compressive strength of plain and fiber reinforced concrete after exposure to different heating and cooling regimes	4
Relationship between multifractal characteristics of particle-size distribution and hydraulic conductivity of unsaturated soils	4
An experimental and statistical investigation on the fresh and hardened properties of HFR-SCC: the effect of micro fibre type and fibre hybridization	4
Using P-wave propagation velocity to characterize damage and estimate deformation modulus of in-situ rock mass	4
Mechanical properties distribution of lime-fly ash solidified oil contaminated soil in a coastal environment	4
Dynamic behaviour of drystone retaining walls: shaking table scaled-down tests	4
Elasto-plastic behavior of the Fontainebleau sandstone based on a refined continuous strain deviation approach	4
Influence of stress relief due to deep excavation on a brick masonry wall: 3D numerical predictions	4
Seismic analysis of damaged concrete gravity dams subjected to mainshock-aftershock sequences	4
Experimental and numerical investigation of strengthening of openings in masonry walls using steel bars and steel wire mesh	4
Effect of nano and micro iron oxide particles on the workability, strength and absorption rate of cement mortar containing fly ash	4
Deformation characteristics and influential factors of a toppling rock slope based on the grey relational analysis	4
Mechanical and durability properties of steel, polypropylene and polyamide fiber reinforced slag-based alkali-activated concrete	4
Geosynthetic-reinforced and pile-supported embankments: theoretical discussion of finite difference numerical analyses results	4
Deep tunnel faces in cohesive soils under undrained conditions: application of a new design approach	4
Experimental study of the mechanical properties of basalt fibre-reinforced concrete at elevated temperatures	4
Experimental study on fracture properties of concrete under cyclic loading using digital image correlation method	4
Investigation of suspended particle size effects on clogging of soil filters under laminar flow	4
Experimental investigation of linear damping characteristics on granite and red sandstone under dynamic cyclic loading	4
Optimum characteristics of plastic fibres for sustainable self-compacting concrete SCC	4
Shear banding in unsaturated geomaterials through a strong nonlocal hydromechanical model	4
Stability assessment of a shallow abandoned chalk mine of Malogne (Belgium)	4
Prediction of triaxial drained creep behaviors of interactive marine-terrestrial deposit soils by fractal derivative	4