Environmental Progress & Sustainable Energy

Article	Citations
Detailed analysis on engine operating in dual fuel mode with different energy fractions of sustainable HHO gas	65
Potential for optimization of energy consumption and costs in saffron production in central Iran through data envelopment analysis and multi‐objective genetic algorithm	65
Phosphate bed as energy storage materials for augmentation of conventional solar still productivity	48
Comparative assessment of different diesel engines fueled with 1‐pentanol and diesel blends	47
A history of Hanford tank waste, implications for waste treatment, and disposal	40
Experimental study of spray analysis for Palmarosa biodiesel‐diesel blends in a constant volume chamber	35
Standalone hybridPV/wind/diesel‐electric generator system for aCOVID‐19 quarantine center	34
TF33 Turbofan engine in every respect: Performance, environmental, and sustainability assessment	30
How changes in human activities during the lockdown impacted air quality parameters: A review	29
TMU‐24 (Zn‐based MOF) as an advance and recyclable adsorbent for the efficient removal of eosin B: Characterization, equilibrium, and thermodynamic studies	27
Energy, environment and enviroeconomic analyses and assessments of the turbofan engine used in aviation industry	26
Analysis of the synergistic effects of air pollutant emission reduction and carbon emissions at coal‐fired power plants in China	26
N719 dye as a sensitizer for dye‐sensitized solar cells (DSSCs): A review of its functions and certain rudimentary principles	26
Renewable energy and sustainable development: Evidence from OECD countries	25
Pharmaceuticals and personal care products (PPCPs): Environmental and public health risks	25
Adding n‐butanol, n‐heptanol, and n‐octanol to improve vaporization, combustion, and emission characteristics of diesel/used frying oil biodiesel blends in DICI engine	24
Energy and water: COVID‐19 impacts and implications for interconnected sustainable development goals	24
Characterization of hypercrosslinked polymer adsorbent based on carbazole to achieve higher CO2 capture	23
Sustainability assessment of single slope solar still with glass cover cooling using naturally available fibers	22
A review on recent developments and advances in environmental gas sensors to monitor toxic gas pollutants	21
Design and implementation of an islanded hybrid microgrid system for a large resort center for Penang Island with the proper application of excess energy	21
Evaluation of adsorptive and photocatalytic degradation properties ofFeWO4/polypyrrole nanocomposite for rose bengal and alizarin red S from liquid phase: Modeling of adsorption	21
The nexus among climate change, economic growth, foreign direct investments, and financial development: New evidence from N‐11 countries	20
A comprehensive review of castor oil‐derived renewable and sustainable industrial products	20
Emerging trends in sustainable treatment and valorisation technologies for plastic wastes in Nigeria: A concise review	19

Nitrous oxide emissions from rice paddy: Impacts of rice straw and water management	19
Mixotrophic cultivation of Chlorella vulgaris in sugarcane molasses preceding nitrogen starvation: Biomass productivity, lipid content, and fatty acid analyses	19
Supercritical transesterification route for biodiesel production: Effect of parameters on yield and future perspectives	18
Statistical optimization of photocatalytic degradation process of methylene blue dye by SnO–TiO2–AC composite using response surface methodology	18
Photocatalytic treatment of Crystal Violet in aqueous solution:Box–Behnkenoptimization and degradation mechanism	18
Moringa oleifera seed pod‐based adsorbent for the removal of paracetamol from aqueous solution: A novel approach toward diversification	17
Prediction of methane emission from landfills using machine learning models	17
Efficient performance of copper oxide nanoparticles synthesized with pomegranate leaf extract for neutral red dye adsorption	17
Synthesis and characterization of waste Styrofoam hypercrosslinked polymer as an adsorbent for CO2 capture	17
Combustion, performance, and emission characteristics of diesel engine with nanocera added water emulsified Mahua biodiesel blend	16
Study on a new cascade utilize method for ship waste heat based on TEG‐ORC combined cycle	16
Experimental investigation of single slope solar still with Eucheuma (agar‐agar) fiber for augmentation of freshwater yield: Thermo‐economic analysis	16
Photovoltaic distributed generation integrated electrical distribution system for development of sustainable energy using reliability assessment indices and levelized cost of electricity	16
A phosphogypsum‐based road material with enhanced mechanical properties for sustainable environmental remediation	16
Facile synthesis of Fe3O4@TMU‐12 (Co‐based magnetic MOF) for extraction of diazinon and chlorpyrifos from the environmental water samples	15
Effect of diesel and propanol blends on regulated pollutants and polycyclic aromatic hydrocarbons under lean combustion conditions	15
Investigations of combustion, performance, and emission characteristics in a diesel engine fueled with Prunus domestica methyl ester and n‐butanol blends	15
Porous foams and nanofluids for thermal performance improvement of a direct absorption solar collector: An experimental study	15
Life cycle assessment for hydrothermal carbonization of urban organic solid waste in comparison with gasification process: A case study of Southern Chile	14
Toward natural convection solar drying of date palm fruits (Phoenix dactylifera L.): An experimental study	14
Photocatalytic degradation of p‐nitrophenol in wastewater by heterogeneous cobalt supported ZnO nanoparticles: Modeling and optimization using response surface methodology	14
Temperature, soil moisture, and microbial controls on CO2 and CH4 emissions from a permafrost peatland	14
Optimization and planning of renewable energy sources based microgrid for a residential complex	13
Heterogeneous aluminum oxide/calcium oxide catalyzed transesterification of Mespilus germanica triglyceride for biodiesel production	13
Solvothermal decoration of Cu3SnS4 on reduced graphene oxide for enhanced electrocatalytic hydrogen evolution reaction	13
Treatment of intermediate landfill leachate using different anode materials in electrooxidation process	13
Rice yield and carbon dioxide emissions in a paddy soil: A comparison of biochar and polystyrene microplastics	13
Environmentally friendly dyeing of wool yarns using of combination of bio‐mordants and natural dyes	13
Green ZnO nanoparticles photocatalyst for efficient BR51 degradation: Kinetics and mechanism study	13
Valorization of waste biaxially‐oriented polypropylene plastic films by its co‐carbonization with almond leaves	13
Thermodynamic analysis of simple and modified organic Rankine cycle and vapor compression refrigeration (ORC–VCR) systems	13
Combining life cycle sustainability assessment and fuzzy multicriteria decision making method for prioritizing the flare technologies in the oil, gas, and chemical plants	13
Helianthus annuus assisted green synthesis of Co3O4 and Ag‐Co3O4 and evaluation of their catalytic activities toward	13
Highly production of dihydroxystrearic acid from catalytic epoxidation process by in situ peracid mechanism	13
Investigating the energy security performance, productivity, and economic growth for the EU	12
Adsorption of nickel(II) ions from aqueous solutions using Malatya clay: Equilibrium, kinetic, and thermodynamic studies	12
Effects of exogenous melatonin on the growth and cadmium accumulation of lettuce under cadmium‐stress conditions	12
Developing an adaptive neuro‐fuzzy inference system based on particle swarm optimization model for forecasting Cr(VI) removal by NiO nanoparticles	12
Application of zirconium modified layered double hydroxide and calcination product for adsorptive removal of phosphate from aqueous solution	12
Repurposing and recycling wind turbine blades in the United States	12
Esterification of oleic acid to biodiesel using biowaste‐based solid acid catalyst under microwave irradiation	12
Kinetic and structural changes during gasification of cashew nut shell char particles	12
Recent advancement in the application of metal based nanoadditive in diesel/biodiesel fueled compression ignition engine: A comprehensive review on nanofluid preparation and stability, fuel property,	12
Removal of emerging micropollutants from wastewater by nanofiltration and biofilm reactor (MicroStop)	11
A review of the sustainable development goals to make headways through theCOVID‐19 pandemic era	11
Superior adsorption of methyl blue on magnetic Ni–Mg–Co ferrites: Adsorption electrochemical properties and adsorption characteristics	11
Performance enhancement of constructed wetlands for wastewater remediation by modifications and integration of technologies: A review	11
Improved decolorization of dye wastewater and enhanced power output in the electrically stacked microbial fuel cells with H2O2 modified corncob anodes	11
Determinants of access to clean fuels and technologies for cooking in Africa: A panel autoregressive distributed lag approach	11
Environmental friendly exploration of cinnamon bark ( Cinnamomum verum ) based yellow natural dye for green coloration of bio‐mordanted	11

Biofuel characteristics and combustion emissions of poultry litter and lignocellulosic biomass	11
Simultaneous adsorption of manganese and fluoride from aqueous solution via bimetal impregnated activated carbon derived from waste tire: Response surface method modeling approach	10
Biosorption of fluoride from aqueous solutions byRhizopus oryzae: Isotherm and kinetic evaluation	10
Experimental exergy analyses in aDIdiesel engine fuelled with a mixture of diesel fuel andTiO2nano‐particle	10
The nexus between environmental degradation and industrial development in Pakistan and roles of financial development and fossil fuel	10
Characterization of products obtained of waste polyethylene terephthalate by pyrolysis	10
Non‐competitive and competitive adsorption of Zn(II), Cu(II), and Cd(II) by a granular Fe‐Mn binary oxide in aqueous solution	10
Experimental investigation to enhance the low‐temperature nitrogen oxide emission reduction in biodiesel exhaust using selective catalytic reduction with direct ammonia injection and manganese cerium	10
Methane emissions and energy generation potential from a municipal solid waste landfill based on inventory models: A case study	10
Fabrication and stabilization of green nanosilver using gardenia yellow natural dyes for efficient degradation of bacteria	10
Energy, exergy, and cost analysis of solar powered desiccant air conditioning system	9
Performance, environment, and cost‐benefit analysis of a split air conditioning unit usingHC‐290 andHCFC‐22	9
Optimization of engine operating variables on performance and emissions characteristics of biogas fuelled CI engine by the design of experiments: Taguchi approach	9
Heterogeneous degradation of oil field additives by Cu(II) complex‐activated persulfate oxidation	9
Evaluation of photocatalytic performance and cytotoxic activity of green synthesized nickel ferrite nanoparticles	9
Conversion efficiency of bioethanol from levoglucosan was improved by the newly engineered Escherichia coli	9
Enhancement of biogas yield from dual organic waste using hybrid statistical approach and its effects on ternary fuel blend (biodiesel/n‐butanol/diesel) powered diesel engine	9
Conversion of Karanja oil to biodiesel using modified heterogeneous base catalyst	9
	9
Mitigation of PFAS in U.S. Public Water Systems: Future steps for ensuring safer drinking water	9
Experimental investigation on performance of absorbents for carbon dioxide capture from diesel engine exhaust	9
Effectiveness of metakaolin and hybrid polymers incorporated mortar for the compressive strength and acid resistance of industrial and wastewater infrastructure	9
Greenhouse gas accounting for the energy transition in a brewery	9
Impact of polystyrene microplastics on cadmium uptake in corn (Zea maysL.) in acadmium‐contaminatedcalcareous soil	9
Preparation, characterization, and adsorption properties of modified carbon nanotubes for highly effective removal of tetracycline from aquaculture wastewater	9
Deterministic and probabilistic analysis of different empirical models to estimate monthly mean diffuse solar radiation for composite climatic region of India	9
Phytoextraction of heavy metals from tannery sludge: A cleaner approach	9
Improvement of performance and emission in a lean‐burn gas fueled spark ignition engine by using a new pre‐chamber	9
Ficus hispida leaf paste for goatskin preservation: Pollution reduction in tannery wastewater	9
Hydration activity and mechanical properties of steel slag used as cementitious materials	9
Feasibility of using near‐azeotropic refrigerant mixture R290/R1234ze(E) as substitute for R22	9
Thermal performance analysis of a novel direct absorption solar collector augmented solar still using silver nanofluids	9
Physicochemical characteristics of dried ivy gourd in a single slope solar dryer	8
Biodrying for fuel recovery from sewage sludge: An integrated evaluation by ultimate and proximate analyses	8
Biodiesel production from preutilized cooking oil using a renewable heterogeneous eggshell‐coconut pith catalyst: Process optimization and characterization	8
An integrated trapezoidal fuzzy FUCOM‐TOPSIS method to determine alternatives' ranking and utilization in the water treatment plant	8
Heavy metal pollution level and potential ecological risk assessment of sludge landfill	8
UV sensitive ZnO and TiO2‐ZnO nanocrystalline transparent glass‐ceramic materials for photocatalytic decontamination of surface water and textile industry w	8
High‐efficiency adsorption of various heavy metals by tea residue biochar loaded with nanoscale zero‐valent iron	8
Integration of solar dryer with a hybrid system of gasifier‐solid oxide fuel cell/micro gas turbine: Energy, economy, and environmental analysis	8
Effect of biomethane substitution on combustion noise and performance of a dual fuel common rail direct injection diesel engine	8
The adsorption of phenol on granular activated carbon prepared from waste coconut shell in Trinidad	8
Numerical and experimental analysis on spray characteristics of biodiesel (waste cooking oil) using pressure swirl atomizer	8
Simulation investigation of the effect of various exhaust gas recirculation temperatures and amounts on the exergy terms in a direct injection diesel engine fueled by diesel/biodiesel	8
Single and competitive sorption potential of date seed‐derived biochar during removal of lead (II) and cadmium (II) ions	8
Digital economy, new‐type urbanization, and carbon emissions: Evidence from China	8
Development of Environmental Decision Support System for Sustainable Smart Cities in India	8
Distribution of carbon and nitrogen cycle microbes along permafrost peatland profile in Northeast China	8
Optimization and prediction of pulsating heat pipe compound parabolic solar collector performances by hybrid deep belief network based bald eagle search optimizer	8
Valorization of waste waxed corrugated cardboard via pyrolysis for recovering wax	8
Structural, morphological, and electrochemical properties of AB5 hydrogen storage alloy by mechanical alloying	8
Attitude, knowledge and perception of choice of cooking fuels: Evidence from two large communities in South‐east Nigeria	7
A new double Z‐scheme TiO2/ZnO‐g‐C3N4 nanocomposite with enhanced photodegradation efficiency for Rhodamine B under sunlight	7
Experimental investigation on using adsorbent for post‐combustion carbon dioxide capture from CI engine exhaust	7
Potential application of palm oil products as electrical insulating medium in oil‐immersed transformers	7
Modernizing the U.S. electric grid: A proposal to update transmission infrastructure for the future of electricity	7
Evaluating the challenges to Life Cycle Assessment using Best‐Worst Method and Decision‐Making Trial and Evaluation Laboratory	7
Evaluation of factors affecting tetracycline and diclofenac adsorption by agricultural soils using response surface methodology	7
Generation of biofuel from anaerobic digestion of Scenedesmus obliquus grown in energetic‐laden industrial wastewater: Understanding microalgae strains, co‐digestants, and digestate toxicity	7
Isotherm and kinetic studies for sorption of Cr(VI) onto Prosopis cineraria leaf powder: A comparison of linear and non‐linear regression analysis	7
Comparative thermoeconomic optimization and exergoenvironmental analysis of an ejector refrigeration cycle integrated with a cogeneration system utilizing waste exhaust heat recovery	7
Development of hemp fiber composites with recycled high density polyethylene grocery bags	7
Removing Co(II) and Mn(II) ions effectively from aqueous solutions by means of chemically non‐processed Mardin stone waste: Equivalent, kinetic, and thermodynamic investigations	7
Experimental modeling and optimization of melanin production by Aureobasidium pullulansNBRC 100716 in carrot peel extract	7
Catalytic role of binary oxides (CuO and Al2O3) on hydrogen storage in MgH2	7
A simulation model of climate policy analysis for sustainable environment in Pakistan	7
Assessment of renewable energy transition in Moroccan electricity sector using a system dynamics approach	7
Sustainable phytoremediation of highly acidic mine spoil through economical valuable crop Pelargonium graveolens L	6
Effect of pilot fuel injection timing on the performance, combustion, and exhaust emissions of biodiesel–ethanol–diethyl ether blend fueled CRDI engine under hydrogen dual fuel s	6
Pyrolysis kinetics and conversion of pomegranate peels into porous carbon	6
Classical‐Fenton and Photo‐Fenton oxidation of wastewater arising from cosmetic automobile care products	6
Materials design and system structures of solar steam evaporators	6
Investigation of tropical plant‐based natural dyes combination and adsorption optimization for natural dye‐sensitized solar cell	6
Adsorptive degradation of hexavalent chromium from aqueous solution using coconut shell as a green adsorbent	6
Design of water‐energy management based on neural networks for an autonomous solar and wind renewable energy system coupled with brackish water desalination	6
Potential use of wood pyrolysis coproducts: A review	6
Catalytic pyrolysis of crofton weed: Comparison of their pyrolysis product and preliminary economic analysis	6
Anaerobic digestion of waste activated sludge to produce volatile fatty acids and release nutrients using sodium citrate with sodium hydroxide pretreatment	6
Hydrogen generation from the hydrolysis of ethylenediamine bisborane using Ni/NixByZr and Pd‐Ni/NixB	6
Synthesis of t‐B.PWFe/NiO nanocomposite as an efficient and heterogeneous green nanocatalyst for catalytic oxidative‐extractive desulfurization of gasoline	6

Machine learning predictive models for optimal design of photovoltaic/thermal collector with nanofluids based geothermal cooling	6
Experimental investigation on the effects of using ethanol with biodiesel and diesel blends along with exhaust gas recirculation and magnetization of fuel in the diesel engine	6
Developing a new model in solar radiation estimation with genetic algorithm method	6
Magnetic urchin‐like NiCo2O4 material derived from wastes as a peroxymonosulfate activator for the degradation of bisphenol A	6
Comparison of separation performance of absorption column and membrane contactor system for biohydrogen upgraded from palm oil mill effluent fermentation	6
Design of an acidic sulfonated mesoporous carbon catalyst for the synthesis of butyl levulinate from levulinic acid	6
Doping metal–organic framework composites to antibacterial air filter development for quality control of indoor air	6
Detailed studies on employing fish canning waste as a partial alternative in a research diesel engine: Waste to energy initiation	6
Optimization of photocatalytic degradation of biochemical oxygen demand from textile industry effluent using copper oxide nanoparticles by response surface methodology	6
Assessing the environmental benefits of battery packs from multi‐vehicle and multi‐region perspective: Aiming for lightweight and carbon neutrality	6
Chitosan as an organic amendment to improve soil properties and plant growth in the presence of polystyrene microplastics	6
Experimental comparison of evacuated tube solar air heater based on energy and exergy analyses with environmental and economic (4‐E) study	6
Experimental comparison of solar thermal desalination systems based on energy, exergy and economic (3‐E) analysis	6
A new approach to the synthesis of CuFe2O4@CeO2 direct Z‐scheme with a core‐shell structure for enhanced photo‐degradation of methyl violet under ultraviolet and visib	6
Biodiesel production from sunflower and waste cooking oils using K2O/RGO catalyst	6
Effect of slope tower angle and thermal storage media on flexibility solar chimney power plant performance	6
Distributed wind and solar power for grid sustainability and emission reduction	5
A state‐of‐the‐art review of the fate of heavy metals and product properties from pyrolysis of heavy‐metal(loid)‐enriched biomass harvested from phytoextraction	5
An environmental, energy, and economic efficiency analysis for the energy market in European Union	5
Sonochemical synthesis of cobalt (II) metal–organic framework (TMU‐10)/polypyrrole nanocomposites with high adsorption capacity for dye removal from water	5
High adsorption of methylene blue from water onto graphenic materials: Effect of degree of graphitization and analysis of kinetic models	5
Identification of sensitive process parameter of rubber seed oil conversion to biodiesel using fluorite and calcined limestone as catalysts—Uncertainty error analysis	5
Gemifloxacin removal from aqueous solution by rice‐straw based activated carbon: Batch adsorption and thermal regeneration	5
Dissolution kinetics of metallic zinc obtained from spent zinc‐carbon batteries in nitric acid solutions	5
Synthesis of geopolymers based on mechanically activated low‐calcium iron‐rich fly ash	5
Analysis of an uncovered photovoltaic/thermal solar system powering a seawater reverse osmosis desalination plant	5
Extraction and characterization of the lipids from domestic sewage sludge and in situ synthesis of methyl esters	5
Insight aerodynamic analysis on small‐scale wind turbines airfoils for low Reynolds number applications	5
Increasing the efficiency of liquefied natural gas production plant with considering appropriate refrigerant components	5
Novel fumed silica/g‐C3N4 composites for highly efficient removal of rhodamine B under visible light emitting diodes light irradiation	5
Preparation and performance evaluation of hybrid polymer flocculants (PAC‐PAM), and comparison experiments with other flocculants	5
A comprehensive review on impacts of COVID‐19 in food preservation and cold chain: An approach towards implementing green energy technologies	5
Artificial intelligence and response surface methodology to predict CO2 capture using piperazine‐modified activated alumina	5
Measurements and modeling of CO2 adsorption behaviors on granular zeolite 13X: Impact of temperature and time of calcination on granules properties in granulation proc	5
The impact of the COVID‐19 pandemic on the economic viability of distributed photovoltaic systems in Brazil	5
Comparative analysis of hybrid renewable energy systems based on concentrating solar and biomass technologies forFaro‐Poli, Cameroon	5
Exploration of mechanisms of lignin extraction by different methods	5
Efficient photocatalytic degradation of emerging pollutants by green synthesized Prussian blue analogue nanocomposite	5
Virtual power plant implementation scheme in Shenzhen city	5
Relative exergy and energy analysis of DI‐CI engine fueled with higher blend of Azadirachta indica biofuel with n‐butanol and NiO as fuel additives	5
Assessing the efficacy of water management and wheat straw addition in mitigating methane emissions from rice paddy fields	5
Critical operating parameters of solar flat plate collectors using CuO nanoparticles of different volume fractions subjected to natural convection	5
Assessment of emission and environmental parameters of different commercial high by‐pass turbofan engines throughout landing and take‐off cycle	5
Application of central composite design and response surface methodology for the study of extraction of gentian violet dye in aqueous solution by polystyrene membrane modified with oleic acid	5
Effects of exogenous gibberellic acid on growth and cadmium accumulation in Cyphomandra betacea seedlings	5
Explaining the rise and fall of the photovoltaic technological innovation system in Iran	5
Catalytic oxidation of toluene over B‐site doped La‐based perovskite LaNixB1−xO3 (B = Co, Cu) catalysts	5
The influence of organic pollutant load and external resistance on the performance of a solid phase microbial fuel cell fed orange peel wastes	5
Desalination using solar stills: A review	5
Sequential uptake of cadmium and methylene blue from binary solution using zeolite‐TiO2 modified porous CaCu3Ti4O12 photocatalyst	5
A novel functionalized chitosan nanoadsorbent for efficient elimination of malachite green from aqueous media	5
Influence of organic amendments on acidic soil responsive crop groundnut (Arachis hypogaeaL.)	5
A comprehensive review of nano‐phase change materials with a focus on the effects of influential factors	5
Adsorption of Cu2+, Cd2+, and Zn2+ by engineered biochar: Preparation, characterization, and adsorption properties	5
Magnetically recoverable steel slag/TiO2 visible‐light‐driven photocatalyst for paraquat degradation	5
Impact of antimicrobial resistance on sustainable development goals and the integrated strategies for meeting environmental and socio‐economic targets	5
Breakthrough studies of the adsorption of lead from synthetic solution using Liagora viscida in a fixed bed column	5
Development of machine learning models based on air temperature for estimation of global solar radiation in India	5
Application of the novel pH‐catalytic‐magnetic tri‐functionalities augmented bead for removal of organic dye pollutants	4
Synthesis of iron molybdate from molybdenum spent catalyst and evaluation of its electrochemical properties	4
Performance analysis based on energy and exergy output of double slope passive and active solar still	4
A novel design approach for indoor environmental quality based on a multiagent system for intelligent buildings in a smart city: Toward occupant's comfort	4
Strategic drivers for the deployment of energy economics principles in the developing construction industry: A Nigerian perspective	4
A new approach based on moving least square method for calculating the Weibull coefficients	4
Modification g‐C3N4 by MgO and its application for glycerol carbonate synthesis from glycerol and dimethyl carbonate	4
An effective method to remove organic sulfur in coal: Effects on the physicochemical properties and combustion kinetics	4
Experimental investigation of engine characteristics of CI engine fueled with fatty acid Millettia Pinnata oil with non‐fatty acid Pinus oil blended fuel	4
Investigation of slaughterhouse waste anaerobic digestion in a pilot‐scale mesophilic reactor	4
Potential application of domestic solar dryers for coriander leaves: Drying kinetics, thermal efficiency, and quality assessment	4
Optimization of a three‐dimensional electrochemical process with granular activated carbon for diclofenac removal using response surface methodology	4
Remediation of a clay soil contaminated with phenanthrene by using mixture of bentonite and cement	4
Iron modified zeolite carrier for efficiently pharmaceutical pollutant degradation in heterogeneous electro‐Fenton: Influence factors and kinetic	4
Impacts of phase change materials on performance of operational peak load shifting strategies in a sample building in hot‐arid climate	4
Impact analysis of energy‐related carbon emission in Chongqing based on logarithmic mean division index	4
Room‐temperature synthesis of flower‐like hierarchical architecture of BiOI and enhanced photocatalytic activity: Application of response surface methodology	4
Valorization of harmful algal blooms and food waste as bio‐methane	4
Treatment of starch‐rich wastewater using fly ash‐based low‐cost tubular ceramic membrane	4
Experimental investigations on the performance of solar cooker using nichrome heating coil—Photovoltaic with microcontroller PIC 16F877A	4
Comparative study of biochar prepared from cow dung and sewage sludge and its application as an adsorbent for organic pollutants removal in water	4
Effect of diesel‐biodiesel‐alcohol blends on combustion, performance, and emission characteristics of a single cylinder compression ignition engine	4
Evaluation of performance improvement of the combined biomass gasifier power cycle using low‐temperature bottoming cycles: Organic Rankine cycle, Kalina and Goswami	4
High‐capacity hydrogen storage on Li‐decorated B16N16	4
Water–food–energy nexus: Assessing challenges in the trend toward digitalization: The case study of an Italian winemaking industry	4
Raw sunflower seed shell particles as a green adsorbent for the adsorption of synthetic organic dyes from wastewater	4
Advances in the application of molecular sieves as catalysts for lignin depolymerization—HZSM‐5 as an example	4
Synthesis and characterization of layered double hydroxide decorated zeolite as the efficient sorbent for removal of toxic metal ions	4
Performance evaluation, environmental regulation, and urban land green use efficiency: Evidence from China	4
Performance of roof‐cool paints prepared using organic acrylic polymer binder and inorganic additives for the thermal reduction in buildings	4
Performance assessment of a desalination system integrated with ground heat exchanger for hydrogen and fresh water production	4
Effect of biochar and attapulgite amendment on saline soil hydraulic parameters and shrinkage	4
Techno‐economic assessment of trans‐critical CO2 booster system with modified evaporative cooling for supermarket application in Indian context	4
Experimental optimization of replacing R22 with R417A without any other changes in configuration of residential air‐conditioning systems based on energy and exergy analysis	4
Investigation of heavy metal removal from salty wastewater and voltage production using Shewanella oneidensisMR‐1 nanowires in a dual‐chamber microbial fuel cell	4
Biogas production potential from animal farm waste in Bangladesh: Case studies of two selected farms	4
A review on microbial fuel cell technology for Brewery industry wastewater treatment – From fundamentals to pilot scale studies	4