Journal of Medical Devices-Transactions of the Asme

Papers
(The median citation count of Journal of Medical Devices-Transactions of the Asme is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Microfluidic Devices for Magnetic Separation of Biological Particles: A Review12
Kinematic Analysis and Design of a Six-Degrees of Freedom 3-RRPS Mechanism for Bone Reduction Surgery11
Classification and Comparison of Mechanical Design of Powered Ankle–Foot Prostheses for Transtibial Amputees Developed in the 21st Century: A Systematic Review10
Design, Fabrication, and Testing of a Flexible Three-Dimensional Printed Percutaneous Needle With Embedded Actuators9
Design and Fabrication of Custom-Fit BiPAP and CPAP Masks Using Three-Dimensional Imaging and Three-Dimensional Printing Techniques9
Scale Effects on Performance of BLDC Micromotors for Internal Biomedical Applications: A Finite Element Analysis8
Design and Modeling of a Parallel Continuum Manipulator for Trunk Motion Rehabilitation8
Monocular Vision-Based Retinal Membrane Peeling With a Handheld Robot7
Design and Evaluation of a Handheld Robotic Device for Peripheral Catheterization7
Design and Experimental Characterization of a Cable-Driven Elbow Assisting Device7
A Systematic Review of Compliant Mechanisms as Orthopedic Implants6
Shape Accuracy and Surface Quality of Additively Manufactured, Optimized, Patient-Specific Bone Plates6
Full-Dimensional Intuitive Motion Mapping Strategy for Minimally Invasive Surgical Robot With Redundant Passive Joints5
iQbD: A Technological Readiness Level-Indexed Quality-by-Design Paradigm for Medical Device Engineering5
Mechatronic Design and Active Disturbance Rejection Control of a Bag Valve-Based Mechanical Ventilator5
A Low-Cost Visual Grasp Aid for Neuropathy Patients Using Flexible Three-Dimensional Printed Tactile Sensors5
A Novel Design for a Compliant Mechanism Based Variable Stiffness Grasper Through Structure Modulation5
Generic Implant Positioning Technology Based on Hole Projections in X-Ray Images5
Development and Evaluation of a Prosthetic Ankle Emulator With an Artificial Soleus and Gastrocnemius4
Apparatus for In Vivo Knee Laxity Assessment Using High-Speed Stereo Radiography4
Design and Evaluation of a Passive Constant Force Mechanism for a Cardiac Ablation Catheter4
Development of a pO2-Guided Fine Needle Tumor Biopsy Device4
Stakeholders, Prototypes, and Settings of Front-End Medical Device Design Activities4
Design and Initial Validation of a Multiple Degree-of-Freedom Joint for an Ankle-Foot Orthosis4
Three-Dimensional Force Perception of Robotic Bipolar Forceps for Brain Tumor Resection4
Literature Review on Endoscopic Robotic Systems in Ear and Sinus Surgery4
A Conformable Two-Dimensional Resistance Temperature Detector for Measuring Average Skin Temperature4
Design and Performance Evaluation of a Hybrid Hand Exoskeleton for Hand Opening/Closing4
RailBot: A Novel Assistive Device for Stair Climbing4
Design of a Surgical Pen-Type Probe for Real-Time Indocyanine Green Fluorescence Emission Diagnosis3
Three-Dimensional Printing in Combined Cartesian and Curvilinear Coordinates3
Research on Movement Intentions of Human's Left and Right Legs Based on Electro-Encephalogram Signals3
A Computational Method for the Estimation of the Geometrical and Thermophysical Properties of Tumor Using Contact Thermometry3
Human–Robot Interfaces of the NeuRoboScope: A Minimally Invasive Endoscopic Pituitary Tumor Surgery Robotic Assistance System3
A New Medical Device Modeling Framework for Predicting the Performance of Indwelling Continence Care Devices and Improving Patient Care3
Inexpensive Multipatient Respiratory Monitoring System for Helmet Ventilation During COVID-19 Pandemic3
Multimodal Risk-Based Path Planning for Neurosurgical Interventions3
Establishing a Quantitative Endpoint for Transarterial Embolization From Real-Time Pressure Measurements3
Functional Evaluation of a Personalized Orthosis for Knee Osteoarthritis: A Motion Capture Analysis3
Fully Closed Loop Test Environment for Adaptive Implantable Neural Stimulators Using Computational Models3
Microbiota Sampling Capsule: Design, Prototyping and Assessment of a Sealing Solution Based on a Bistable Mechanism3
Clinical Translation of an Insertion Tool for Minimally Invasive Cochlear Implant Surgery3
Custom Three-Dimensional-Printed CPAP Mask Development, Preliminary Comfort and Fit Evaluation3
Performance and Sensitivity Analysis of an Automated X-Ray Based Total Knee Replacement Mass-Customization Pipeline3
Use of Real-World Data for Enhancing Model Credibility: Applications to Medical Device Development3
DynaRing: A Patient-Specific Mitral Annuloplasty Ring With Selective Stiffness Segments3
Application-Specific Learning Curve With a Modern Computer-Assisted Orthopedic Surgery System for Joint Arthroplasty2
Device Prototype for Vaginal Delivery of Extremely Preterm Fetuses in the Breech Presentation2
Characterization and Validation of Fatigue Strains for Superelastic Nitinol Using Digital Image Correlation2
Design and Functionality of a Multilumen Thoracic Access Port for Pericardial Access Under Direct Visualization2
Design and Development of a Spherical 5-Bar Thumb Exoskeleton Mechanism for Poststroke Rehabilitation2
A Translatable System for Bi-Directional Stimulation and Evoked Response Measurement to Enable Neuronal Network Exploration2
Optimal Design and Experiment of Cable-Driven Puncturing Surgery Robot for Soft Needle2
Surgical Microgrippers: A Survey and Analysis2
Velocity-Domain Motion Quality Measures for Surgical Performance Evaluation and Feedback2
Mechanical Characterization and Validation of the Dynamic Collimation System Prototype for Proton Radiotherapy2
Research on Biomechanical Compatibility for the Artificial Anal Sphincter Based on Improved Actuator2
A Novel Low-Cost Three-Dimensional Printed Brace Design Method for Early Onset Scoliosis2
A Low-Cost Three-Axis Force Sensor for Wearable Gait Analysis Systems2
An Experimental Study of Feasibility of a Mini-Invasive Fixator for Rib Osteosynthesis2
Experimental Structural Stiffness Analysis of a Surgical Haptic Master Device Manipulator2
Design Synthesis of a Robotic Uniaxial Torque Device for Orthopedic Haptic Simulation2
Positive Pressure Testing Booths Development and Deployment in Response to the COVID-19 Outbreak2
RestEaze: An Emerging Technology to Characterize Leg Movements During Sleep2
Effect of Leaflet Type and Leaflet-Stent Attachment Height on Transcatheter Aortic Valve Leaflet Thrombosis Potential2
VEMERS UC: A Clinically Validated Emergency Mechanical Ventilator for COVID-19 and Postpandemic Use in Low Resource Communities2
A Practical Approach to the Design and Development of Tele-Operated Surgical Robots for Resource Constrained Environments—A Case Study2
Pre-Operative Motion Planner for Steerable Needles Using Cost Map Based on Repulsive Field and Empirical Model of Needle Deflection2
Comanipulation Robotic Platform for Spine Surgery With Exteroceptive Visual Coupling: Development and Experimentation2
Feasibility of a One Degree-of-Freedom Linear Robot for Bed-Bound Stroke Rehabilitation2
Control of a Robotic Flexible Endoscope Holder for Laparoscopic Surgery2
Protective Masks Utilizing Nonendangered Components2
User-Centered Virtual Environment for Poststroke Motor Rehabilitation2
Biologic: H-Bot Kinematics Based Multi-Micro-Extrusion Bioprinter2
Neuromodulation Applications for Chronic Pain1
Trajectory Planning Software for Deep Brain Stimulation Driven by Patient-Specific Data1
Design, Modeling, and Experimental Characterization of A Valveless Pulsatile Flow Mechanical Circulatory Support Device1
A Modular Magnetic Resonance Imaging-Compatible Pipette Simulator to Evaluate How Design Affects the Basilar Thumb Joint Mechanics1
Designing an Interchangeable Multi-Material Nozzle System for the Three-Dimensional Bioprinting Process1
In Vitro Thrombogenicity Testing of Biomaterials in a Dynamic Flow Loop: Effects of Length and Quantity of Test Samples1
Design of a Novel Tendon-Sheath-Driven Upper Limb Exoskeleton for Assisting Surgeon Performing Microlaryngoscopic Surgery1
Generating Appropriate and Reliable Evidence for Value Assessment of Medical Devices: An ISPOR Medical Devices and Diagnostics Special Interest Group Report1
Sterile Tissue Ablation Using Laser Light—System Design, Experimental Validation, and Outlook on Clinical Applicability1
Design Synthesis and Preliminary Evaluation of a Novel Tool to Noninvasively Characterize Pressurized, Physiological Vessels1
Using Smartphones for Clinical Assessment in Cervical Spondylotic Myelopathy a Feasibility Study1
Characterization of Acetabular Cup Insertion Forces in Cancellous Bone Proxy for Validation of an Invasive Sensing Model and Development of Automatic Prosthesis Installation Device: A Preliminary Stud1
Deformation Modeling of a Flexible Instrument Using a Bézier Curve1
Design of a Legged and Clamper-Based Capsule Robot With Active Locomotion Function1
In Vitro Evaluation of a Nasal Interface Used to Improve Delivery From a Portable Oxygen Concentrator1
Design and Performance Testing of a Novel In Vivo Laparoscope Lens Cleaning Device1
Design and Evaluation of Self-Cooling Electrodes for Radiofrequency Intestinal Anastomosis1
Design of Low-Cost Endoscope Based on Novel Wire-Driven Rotary Valve and Water-Jet Mechanism1
A New Handheld Tool to Select the Correct Tibial Insert Thickness by Measuring the Force to Push a Trial Insert Into Position During Total Knee Arthroplasty Surgery1
Autonomous Cricothyroid Membrane Detection and Manipulation Using Neural Networks and a Robot Arm for First-Aid Airway Management1
Gravity Augmented Fused Filament Fabrication Additive Manufacturing1
Preliminary Assessment of a Laparoscopic Training System Using Magneto-Rheological Clutches and Virtual Reality1
A Novel Suction-and-Irrigation Laparoscopic Surgical Instrument: Internal Design and Preclinical Performance Evaluation1
Design, Analysis, and Control of a User-Adaptive Ankle Foot Orthosis1
Application of Artificial Neural Network to Nucleic Acid Analysis: Accurate Discrimination for Untypical Real-Time Fluorescence Curves With High Specificity and Sensitivity1
High-Speed Jet Injector for Pharmaceutical Applications1
Fatigue Evaluation of a New Two-Piece Dental Implant, Having a Replaceable Titanium Sleeve1
Preliminary Evaluation of Hydraulic Needle Delivery System for Magnetic Resonance Imaging-Guided Prostate Biopsy Procedures1
Examination of Mechanical Properties and Photoelastic Properties of Gel Material for Blood Vesssel Mimics1
A Novel Design Method for the Knee Joint of the Exoskeleton Based on the Modular Wearable Sensor1
The Multisplit Ventilator System: Design and Function of a Regulated, Shared Ventilator System1
SW-SiStA2: A New-Generation Semi-Wearable Device for Sit-to-Stand Assistance1
A Novel Approach to Open Reduction and Internal Fixation of Distal Radius Fractures Utilizing a Multi-Degree-of-Freedom Traction and Stabilization Device1
PEGASOS - A New Linking Mechanism for Modular Osteosynthesis Plates in Minimally Invasive Acetabular Surgery1
On the Design and Testing of an Origami Inspired Nasal Cover: Mitigating Aerosol Risks During Endoscopic Sinus Procedures1
Evaluation of a Pneumatic Vest to Treat Symptoms of ARDS Caused by COVID-191
Design and Experiment Research of a Novel Retrievable Peripheral Vascular Stent1
Design, Fabrication, and Validation of a Portable Perturbation Treadmill for Balance Recovery Research1
0.028779029846191