Journal of Prosthodontic Research

Article	Citations
A systematic review of digital removable partial dentures. Part II: CAD/CAM framework, artificial teeth, and denture base	57
The accuracy of implant placement with computer-guided surgery in partially edentulous patients and possible influencing factors: A systematic review and meta-analysis	50
Comparison of the flexural and surface properties of milled, 3D-printed, and heat polymerized PMMA resins for denture bases: An <i>in vitro</i> study	47
A Potential Application of Materials Based on a Polymer and CAD/CAM Composite Resins in Prosthetic Dentistry	39
Prospective study of monolithic zirconia crowns: clinical behavior and survival rate at a 5-year follow-up	39
The biological width around implant	36
Clinical performance of monolithic CAD/CAM tooth-supported zirconia restorations: systematic review and meta-analysis	35
A systematic review of digital removable partial dentures. Part I: Clinical evidence, digital impression, and maxillomandibular relationship record	33
Clinical evaluation of monolithic zirconia crowns: a failure analysis of clinically obtained cases from a 3.5-year study	32
Accuracy evaluation of complete-arch models manufactured by three different 3D printing technologies: a three-dimensional analysis	31
A system for designing removable partial dentures using artificial intelligence. Part 1. Classification of partially edentulous arches using a convolutional neural network	31
Oral frailty and gait performance in community-dwelling older adults: findings from the Takashimadaira study	31
Association between oral health and sarcopenia: A literature review	28
Fracture resistance of maxillary premolars restored with different endocrown designs and materials after artificial ageing	27
Patient satisfaction with conventional dentures vs. digital dentures fabricated using 3D-printing: A randomized crossover trial	26
Trueness and fitting accuracy of maxillary 3D printed complete dentures	26
Reference value of masticatory performance by measuring the amount of glucose extraction from chewing gummy jelly	23
In vitro analysis of intraoral digital impression of inlay preparation according to tooth location and cavity type	21
Measured accuracy of intraoral scanners is highly dependent on methodical factors	21
Current perspectives of residual ridge resorption: Pathological activation of oral barrier osteoclasts	20
Adhesive luting to hybrid ceramic and resin composite CAD/CAM Blocks:Er:YAG Laser versus chemical etching and micro-abrasion pretreatment.	20
Efficacy of adhesive strategies for restorative dentistry: A systematic review and network meta-analysis of double-blind randomized controlled trials over 12 months of follow-up	19
Development of artificial intelligence model for supporting implant drilling protocol decision making	19
Six-year follow-up assessment of prosthesis survival and oral health-related quality of life in individuals with partial edentulism treated with three types of prosthodontic rehabilitation	19
Mechanical and surface properties of additive manufactured zirconia under the different building directions	17

Five-year clinical performance of monolithic and partially veneered zirconia single crowns—a prospective observational study	16
Clinical outcomes and influence of material parameters on the behavior and survival rate of thin and ultrathin occlusal veneers: A systematic review	16
Polyetheretherketone versus titanium CAD-CAM framework for implant-supported fixed complete dentures: a retrospective study with up to 5-year follow-up	16
Association of Oral Health and Mini Nutritional Assessment in Older Adults: A Systematic Review with Meta-analyses	16
Retention of zirconia crowns to Ti-base abutments: effect of luting protocol, abutment treatment and autoclave sterilization.	16
The impact of a newly constructed removable denture on the objective and subjective masticatory function	16
Effect of implant placement depth on bone remodeling on implant-supported single zirconia abutment crown: A 3D finite element study	15
Initial curing characteristics of composite cements under ceramic restorations	15
Mechanical properties of new denture base material modified with gold 　nanoparticles	15
Effectiveness of the socket shield technique in dental implant: A systematic review	15
Four-year clinical evaluation of CAD/CAM indirect resin composite premolar crowns using 3D digital data: Discovering the causes of debonding	15
A simple solution to recycle and reuse dental CAD/CAM zirconia block from its waste residuals	14
Evaluation of the marginal fit of monolithic crowns fabricated by direct and indirect digitization	14
Comparison of the accuracy of different handheld-type scanners in three-dimensional facial image recognition	14
Influence of reinforcement bar on accuracy of removable partial denture framework fabricated by casting with a 3D-printed pattern and selective laser sintering	14
Quantitative evaluation of the degradation amount of the silane coupling layer of CAD/CAM resin composites by water absorption	14
Color and masking properties of translucent monolithic zirconia before and after glazing	13
Effects of abutment tooth and luting agent colors on final color of high-translucent zirconia crowns	13
Clinical effects of conventional and underprepared drilling preparation of the implant site based on bone density: A systematic review and meta-regression	13
Survival and complication rates of tooth-implant versus freestanding implant supporting fixed partial prosthesis: a systematic review and meta-analysis	13
Accuracy of online symptom checkers for diagnosis of orofacial pain and oral medicine disease	12
Influence of intraoral conditions on the accuracy of digital and conventional implant impression techniques for two-implant-supported fixed dental prostheses	12
Influence of fatigue loading on fracture resistance of endodontically treated teeth restored with endocrowns	12
Facial scanning technologies in the era of digital workflow: A systematic review and network meta-analysis	12
Biomechanical evaluation of anterior implants associated with titanium and zirconia abutments and monotype zirconia implants	12
Influence of different cleaning procedures on the shear bond strength of 10-methacryloyloxydecyl dihydrogen phosphate-containing self-adhesive resin cement to saliva contaminated zirconia	12
Marginal adaptation and fracture resistance of milled and 3D-printed CAD/CAM hybrid dental crown materials with various occlusal thicknesses	12
Clinical outcome of posterior cantilever resin-bonded fixed dental prostheses using two different luting agents	12
Digital impressions’ accuracy through “cut-out-rescan” and “data exchange by over scanning” techniques in complete arches of two intraoral scanners and CAD/CAM software	12
Effect of airborne-particle abrasion and polishing on novel translucent zirconias: Surface morphology, phase transformation and insights into bonding	11
Responsiveness of methods to evaluate objective masticatory function in removable partial denture treatments	11
Effects of metformin on the prevention of bisphosphonate-related osteonecrosis of the jaw-like lesions in rats	11
<i>In-vitro</i> accuracy of complete arch scans of the fully dentate and the partially edentulous maxilla	11
Effects of heat-treatment methods on cytocompatibility and mechanical properties of dental products 3D-printed using photopolymerized resin	11
Reliability of a novel wearable device to measure chewing frequency	11
Thermal, structural and morphological characterization of dental polymers for clinical applications	11
Decrease in posterior occlusal support area can accelerate tooth loss: The Suita study	11
Longevity of resin-bonded fixed partial dentures made of metal alloys: A review of the literature	11
A biomimetic approach to evaluate mineralization of bioactive glass-loaded resin composites	11
Average rate of ridge resorption in denture treatment: A Systematic Review	10
Assessment of dental implant stability using resonance frequency analysis and quantitative ultrasound methods	10
Retentive force and fitness accuracy of cobalt-chrome alloy clasps for removable partial denture fabricated with SLM technique	10
Application of artificial intelligence in the dental field: A literature review	10
Is the bond strength of zirconia-reinforced lithium silicate lower than that of lithium disilicate? - A systematic review and meta-analysis	9
Multivariate analysis reveals oral health-related quality of life of complete denture wearers with denture adhesives: a multicenter randomized controlled trial	9
Physical and biological implications of accelerated aging on stereolithographic additive-manufactured zirconia for dental implant abutment	9
Effect of masseter muscle activity during wakefulness and sleep on tooth wear	9
Influence of the base design on the accuracy of additive manufactured casts measured using a coordinate measuring machine	9
Digital assisted soft tissue sculpturing (DASS) technique for immediate loading pink free complete arch implant prosthesis	9
The relationship between dental metal allergy, periodontitis, and palmoplantar pustulosis: An observational study	9

Effect of night dentures on tooth mobility in denture wearers with sleep bruxism: A pilot randomized controlled trial	9
Degree of conversion of resin-cements (light-cured/dual-cured) under different thicknesses of vitreous ceramics: systematic review	9
Factors related to masticatory performance in junior and senior high school students and young adults: A cross-sectional study	9
The rising challenge of mucormycosis for maxillofacial prosthodontists in the Covid-19 pandemic: A literature review	9
Selective Laser Sintering versus Selective Laser Melting and Computer Aided Design – Computer Aided Manufacturing in Double Crowns Retention	9
A lack of specific motor patterns between rhythmic/non-rhythmic masticatory muscle activity and bodily movements in sleep bruxism	8
Current surface modification strategies to improve the binding efficiency of emerging biomaterial polyetheretherketone (PEEK) with bone and soft tissue: A literature review	8
Effect of partial ferrule on fracture resistance of endodontically treated teeth: A meta-analysis of <i>in-vitro</i> studies	8
Optimization of blood and protein flow around superhydrophilic implant surfaces by promoting contact hemodynamics	8
Influence of molding angle on the trueness and defects of removable partial denture frameworks fabricated by selective laser melting	8
Impact of nano-scale trabecula size on osteoblastic behavior and function in a meso-nano hybrid rough biomimetic zirconia model	8
Fracture load of zirconia implant supported CAD/CAM resin crowns and mechanical properties of restorative material and cement	8
Bibliometric analysis and evaluation of the <i>Journal of Prosthodontic Research</i> from 2009 to 2021	8
Comparison of the occurrence of sleep bruxism under accustomed conditions at home and under polysomnography conditions in a sleep laboratory	8
The effect of resin cement shade and restorative material type and thickness on the final color of resin-matrix ceramics	8
Association between masticatory movement and oral and physical function in healthy older women	8
Mechanical properties and surface roughness of chitosan reinforced heat polymerized denture base resin	8
Long-term retrospective clinical study of tooth-supported fixed partial dentures: A multifactorial analysis	7
Fit accuracy of resin crown on a dental model fabricated using fused deposition modeling 3D printing and a polylactic acid filament	7
Clinical application of robots in dentistry: A scoping review	7
Patient-reported outcomes of implant-assisted removable partial dentures with magnetic attachments using short implants: A prospective study	7
Fabrication of sports mouthguards using a semi-digital workflow with 4D-printing technology	7
A new proposal for improving the accuracy of intraoral scanning for partially edentulous residual ridge	7
Validation of masticatory function and related factors in maxillectomy patients based on the concept of "oral hypofunction": A retrospective cross-sectional study	7
Palatal brushing for the treatment of denture stomatitis: A multicentre randomized controlled trial	7
Cyclic pressure-induced cytokines from gingival fibroblasts stimulate osteoclast activity: Clinical implications for alveolar bone loss in denture wearers	6
Fracture behavior of discontinuous fiber-reinforced composite inlay-retained fixed partial denture before and after fatigue aging	6
Clinical outcome of metal- and all-ceramic resin-bonded fixed dental prostheses	6
Effect of computer literacy on the working time of the dental CAD software program	6
Effects of layer thickness and build angle on the microbial adhesion of denture base polymers manufactured by digital light processing	6
Original vs compatible stock abutment- implant connection: An <i>in vitro</i> analysis of the internal accuracy and mechanical fatigue behaviour	6
Population-based reference values for tongue pressure in Japanese older adults: A pooled analysis of over 5,000 participants	6
Analysis of the relevant factors associated with oral health-related quality of life in elderly denture wearers	6
Does the bonding effectiveness of a fiber post/resin composite benefit from mechanical or chemical treatment? Seven methods for saliva-contaminated surfaces	6
Fatigue failure and success rate of lithium disilicate table-tops as a function of cement thickness	6
Bond durability and surface states of titanium, Ti-6Al-4V alloy, and zirconia for implant materials	6
Long-term observation of periodontal condition following placement of removable partial dentures with rigid retainers and major connector in patients with/without diabetes: A retrosp	5
Bond strength of CAD/CAM denture teeth to a denture base resin in a milled monolithic unit	5
Biomechanical behavior of all-ceramic endocrowns fabricated using CAD/CAM: A systematic review	5
Influence of mandibular distal extension implant-supported removable partial dentures on the force exerted on maxillary anterior teeth	5
Expected and perceived burdens in patients receiving mandibular overdentures retained by one or two implants	5
Monitoring fatigue damage in different CAD/CAM materials: A new approach with optical coherence tomography	5
Dental material research in prosthodontics—Towards developing better and efficient biomimetic materials	5
Preclinical bioequivalence study of E.coli-derived rhBMP-2/β-TCP and autogenous bone in a canine guided-bone regeneration model	5
Superimposition of intraoral scans of an edentulous arch with implants and implant-supported provisional restoration, implementing a novel implant prosthetic scan body	5
Socket shield technique: A systemic review and meta-analysis	5
Restoration’s thickness and bonding tooth substrate are determining factors in minimally invasive adhesive dentistry	5
Reliability of automatic finish line detection for tooth preparation in dental computer-aided software	5
Influence of monolithic restorative materials on the implant-abutment interface of hybrid abutment crowns: An <i>in vitro</i> investigation	5
Customized 3D printed nanohydroxyapatite bone block grafts for implant sites: A case series	5
Clinical and radiographic performance of one-piece and two-piece implant:a systematic review and meta-analysis	5
Stimulation of oral mucosal regeneration by low intensity pulsed ultrasound: an in vivo study in a porcine model	5
Risk factors for root caries annual incidence and progression among older people requiring nursing care: A one-year prospective cohort study	5
Influence of butt joint connections with long guiding areas on the stability of single crowns and 3-unit bridges - an in-vitro-study	5
Comparison of the effect of conventional and implant-retained overdentures on brain activity and cognition in a geriatric population - A functional MRI study	5
Effect of degradation of filler elements on flexural strength for dental CAD/CAM resin composite materials in water	5
Influence of zirconia surface treatments of a bilayer restorative assembly on the fatigue performance	5
Development of novel antimicrobial acrylic denture modified with copper nanoparticles	5
Effects of surface glazing on the mechanical and biological properties of 3D printed permanent dental resin materials	5
JPR continues to grow as a leading dental journal and international public asset	5
Niobium silicate as a filler for an experimental photopolymerizable luting agent	5
Implications for clinical dental practice during the coronavirus disease pandemic: A scoping review	5
Dental diagnosis for inlay restoration using an intraoral optical coherence tomography system: A case report	5
Clinical performance of implant-supported single hybrid abutment crown restoration: A systematic review and meta-analysis	4
Development of dental inspection method: nondestructive evaluation of a dentin–adhesive interface by acoustic emission	4
Influence of the chemical composition of monolithic zirconia on its optical and mechanical properties. Systematic review and meta-regression	4
Three-dimensional evaluation of the dental arch in cleft lip and palate after prosthetic treatment	4
Fabrication of milled removable partial dentures using a custom plate with prefabricated artificial teeth	4
Stimulation of dental implant osseointegration by low-Intensity pulsed ultrasound: An <i>in vivo</i> preliminary study in a porcine model	4
Effect of tooth brush abrasion on the color, gloss and surface roughness of internally and externally stained monolithic ceramic materials	4
Impact of hybrid layer formation on the 15-year survival, complications, and failures of full-coverage retainers	4
8-year multicenter retrospective study on partial laminate veneers	4
Patient satisfaction and crestal bone changes with one-piece and two-piece single implant-retained mandibular overdenture: A randomized controlled clinical study	4
Effects of abutment materials on peri-implant soft tissue health and stability: A network meta-analysis	4
Biomechanical performance of three fiberglass post cementation techniques: Imaging, <i>in vitro</i>, and <i>in silico</i> analysis	4
Evaluation of the effect of keratinized mucosa on peri-implant tissue health using a multivariate analysis	4
Fracture resistance of CAD/CAM blocks cemented on dentin using different cementation strategies	4
A digital workflow to predict facial aesthetics in patients with maxillofacial trauma with implant retained prostheses	4
Implant-assisted removable partial dentures: Part I. a scoping review of clinical applications	4
Comparison of the shear bond strength of composite resins with zirconia and titanium using different resin cements	4

Physicochemical properties of anodized-hydrothermally treated titanium with a nanotopographic surface structure promote osteogenic differentiation in dental pulp	4
The biocompatibility of glass-fibre reinforced composites (GFRCs) – a systematic review	4
Gene expression analysis of fresh extraction wounds prior to onset of bisphosphonate-related osteonecrosis of the jaw-like lesions in mice: A preliminary animal study	4
Accuracy of optical interocclusal registration using an intraoral scanner	4
Novel flapless esthetic procedure for the elimination of extended gingival metal tattoos adjacent to prosthetic teeth: Er:YAG laser micro-keyhole surgery	4
Cantilever resin-bonded fixed dental prosthesis to substitute a single premolar: Impact of retainer design and ceramic material after dynamic loading	4
Clinical outcomes of minimally invasive ceramic restorations executed by dentists with different levels of experience. Blind and prospective clinical study	4
Database-Driven Prosthodontics—Future of Digital Dentistry	4
Leadership for the further growth of <i>JPR </i>	4
Implant-assisted removable partial dentures: Part II. a systematic review of the effects of implant position on the biomechanical behavior	4
The biocompatibility of glass-fibre reinforced composites (GFRCs) – a systematic review	3
Bonding properties of third-generation zirconia CAD-CAM blocks for monolithic restorations to composite and resin-modified glass-ionomer cements	3
Evaluation of PEEK and zirconia occlusal rest designs for removable partial dentures based on finite element analysis	3
Maternal chewing alleviates prenatal stress-related neuroinflammation mediated by microglia in the hippocampus of the mouse offspring	3
Effectiveness of denture space recording method in the prosthetic treatment of edentulous patients	3
Factors related to masticatory performance in patients with removable dentures for jaw defects following oral tumor surgery	3
Effect of denture adhesives on masticatory performance: Multicenter randomized controlled trial	3
Evaluation of a palatal lift prosthesis with a flexible lift in a lower cranial nerve palsy patient with dysphagia using high-resolution manometry: A case report	3
Fabricating nasal prostheses using four-dimensional facial expression models	3
The use of mini-implants for provisional prosthetic rehabilitation in growing patients: a critical review	3
Patient preferences for different tooth replacement strategies for the edentulous mandible: A willingness-to-pay analysis	3
Risk assessment of lacunar infarct associated with oral conditions: A case control study focused on radiographic bone loss and Eichner classification	3
Refabrication of an implant-retained obturator using the denture duplication technique in a bilateral maxillectomy patient with a free fibula osteocutaneous flap	3
Effects of dimensions of laser-milled grid-like microslits on shear bond strength between porcelain or indirect composite resin and zirconia	3
Maxillary implant overdentures retained with bars or solitary attachments: A 5-year randomised controlled trial	3
The academic value of <i>JPR</i> is steadily increasing	3
Antimicrobial adhesive polyurethane gel sheet with cetylpyridinium chloride-montmorillonite for facial and somato prosthesis fastening	3
Effects of ceramic thickness, ceramic translucency, and light transmission on light-cured bulk-fill resin composites as luting cement of lithium disilicate based-ceramics	3
Effectiveness of silicone-based resilient denture liners on the patient-reported chewing ability: A randomized controlled trial	3
Applications and performance of artificial intelligence models in removable prosthodontics: A literature review	3
Effect of aging on bone metabolism: the involvement of complement C1q	3
Osteogenic effect of low-intensity pulsed ultrasound on peri-implant bone: A systematic review and meta-analysis	3
Ability to adjust occlusal force in implant-supported overdenture wearers	3
Digital transformation of removable dentures	3
Leadership capabilities to establish a successful research program of any size in any place	3
Fatigue behavior and colorimetric differences of a porcelain-veneered zirconia: effect of quantity and position of specimens during firing	3
Effects of denture adhesives on denture retention and occlusal forces in complete denture wearers: A multicenter, randomized controlled trial	3
Leadership and love: Part 1	3
Association between gonial angle on orthopantomogram and reline frequency in removable partial denture wearers	3
Trends and patterns of patient attendance at an oral rehabilitative tertiary care hospital in India during the COVID-19 pandemic	3
Lack of occlusal support did not impact amyloid β deposition in APP knock-in mice	3
Single mandibular implant study – chewing efficiency – 5-year results from a randomized clinical trial using two different implant loading protocols	3
Evaluation of dynamic impression lining material effects on masticatory function and the oral health-related quality of life of complete denture wearers: A six-month randomized contr	3
JPR starts 2022 with a new design –Towards a new frontier in prosthodontics–	3
Effects of food particle loss on the evaluation of masticatory ability using image analysis	3
The impacts of prosthetic interventions on mastication predominance in Kennedy Class Ⅱ patients	3
Increase in masseter muscle activity by newly fabricated complete dentures improved brain function	3
Effects of attachment type and number of dental implants supporting mandibular overdenture on peri-implant health: A systematic review and network meta-analysis	3
Innate immune regulation in dental implant osseointegration	3
Effect of phosphoric acid and sodium hydroxide on cleaning and bonding of saliva-contaminated feldspar porcelain	3
Accuracy of the preparation depth in mixed targeted restorative space type veneers assisted by different guides: An <i>in vitro</i> study	3
Radiographic predictive factors for 10-year survival of removable partial denture abutment teeth: Alveolar bone level and density	3
Visualization of droplets and aerosols in simulated dental treatments to clarify the effectiveness of oral suction devices	3
Effect of firing procedures and layering thickness of porcelain on internal adaptation of zirconia cantilever resin-bonded fixed dental prostheses	3
Effects of various functional monomers’ reaction on the surface characteristics and bonding performance of polyetheretherketone	3
Effects of denture wearing on coordinated features of jaw and neck muscle activities during chewing in partially edentulous elderly patients	3
Effect of abutment tooth location on the accuracy of digital impressions obtained using an intraoral scanner for removable partial dentures	3
Courage: A key requirement for effective healthcare leadership	3