Journal of Laser Micro Nanoengineering

(The median citation count of Journal of Laser Micro Nanoengineering is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-06-01 to 2024-06-01.)
Material Processing at GHz Burst Mode by Femtosecond Laser Ablation11
Femtosecond Laser Ablation in Burst Mode as a Function of Pulse Fluence and Intra-Burst Repetition Rate9
Dual Process Strategy to Increase the Usable Power for Laser-Milling5
Integration of Microfluidic and Photonic Components within Transparent Cyclic Olefin Copolymers by Using fs Laser4
Research on Maskless Lithography System Based on Digital Oblique Scanning Strategy4
Advances of Laser Welding Technology of Glass -Science and Technology-4
Laser Powder Bed Fusion of Multilayer Thin-walled Structures Based on Data-driven Model3
Efficient Ultrashort Pulsed Laser Processing by Dynamic Spatial Light Modulator Beam Shaping for Industrial Use3
High Speed Soldering Using Laser Printing for the Assembly of Electronic Components3
Comparison of Structural Colors Achieved by Laser-Induced Periodic Surface Structures and Direct Laser Interference Patterning3
Fabrication of Rectangular Micro-Channels by Ultrashort Pulse Ablation Using a Bessel Beam2
Ultra-Short Pulsed Laser Marking and Coloration of Metals with Segmented Pixel Parameter Transformation2
Influence of Nanosecond Pulse Bursts at High Repetition Rates on Ablation Process2
In-Situ Monitoring of Bottom-Up Percussion Drilling of Alkali-Free Alumina-Borosilicate Thin Glasses Using Single and Double Femtosecond Laser Pulses2
Tangential Laser Turning of Fused Silica Using Ultra-short Laser Pulses2
High-Precision Surface Profiling Using Multi-Hundred Watts Ultrashort Pulse Lasers and Ultrafast Polygon-Mirror Based Scanner2
Homogeneous Intensity within the Rayleigh Length and Enhanced Depth of Focus for Gaussian Beams2
Pulse-by-Pulse Optical Observation of Growth of Laser-Induced Periodic Surface Structure at Oblique Incidence2
The Influence of Laser Pulse Duration on Periodic Surface Structures on Stainless Steel2
Process Monitoring in Absorber-Free Laser Transmission Welding of Plastics by Using Deep Learning Algorithms2
Beam Shaping for Uniform and Energy-efficient Surface Structuring of Metals with Ultrashort Laser Pulses in the mJ Range2
Direct Laser Ablation of Glasses with Low Surface Roughness Using Femtosecond UV Laser Pulses1
Crack-free Nanosecond Laser Processing of Mechanically Enhanced Tungsten-rhenium Alloys1
Wetting Properties of Aluminium Surface Structures Fabricated Using Direct Laser Interference Patterning with Picosecond and Femtosecond Pulses1
Observation of SiO2Nanoparticle Formation via UV Pulsed Laser Ablation in a Background Gas1
Comparative Analysis of the Applicability of Feed-Forward and Recurrent Neural Networks for Prediction of Surface Quality of Laser Polished Surfaces1
Laser Peening with Solid-State Medium Having High Acoustic Impedance as Plasma Confinement Layer1
Particle Re-Deposition During Ultrashort Pulse Laser Ablation of ITO Thin Films Using Single- and Multi-Beam Processing1
Femtosecond Laser Drilling of Copper: Modeling and Experiment Comparison1
Monitoring the Heat Accumulation during Fabrication of Surface Micropatterns on Metallic Surfaces Using Direct Laser Interference Patterning1
Gradient and Core-Cladding Waveguides Fabrication in Porous Glass1
Deep Drilling of Structural Timber with High Power Ultrashort Pulsed Laser Radiation1
Comparative Study of Ultraviolet and Infrared Femtosecond Laser Irradiation on Textile Polymers PET and PA661
Wetting Properties of Aluminium Surface Structures Fabricated Using Direct Laser Interference Patterning with Picosecond and Femtosecond Pulses1
Recast-Free Helical Drilling of Fused Silica Using SHG Picosecond Laser Pulses1
UV Direct Laser Interference Patterning of Diffraction Gratings in Poly-Hydroxyethyl-Methacrylate Ophthalmic Polymers1
Laser Structuring of Open Cell Metal Foams for Micro Scale Surface Enlargement1
Generation of Rotationally Symmetric Micro Tools using Ultrashort Laser Pulses1
Effects of Laser Peening Parameters on Plastic Deformation in Aqueous Glycerol Solution as Plasma Confinement Layer1
High Throughput Laser Drilling with High Power Lasers Using a Two-Dimensional Polygon Mirror Scanner1
Online Pyrometry for Weld Seam Localization in Absorber-Free Laser Transmission Welding of Transparent Polymers1
High Pore Density Polyimide Membrane Production by PS Laser Pulses1
Millisecond Pulsed Laser Micro-drilling of Stainless Steel – Optimizing Hole Quality Using Response Surface Methodology1
Printing Method for Long Flight Distance by Laser-Induced Forward Transfer1
Simulation of Laser-Induced Thermo-Mechanical Stress During Ultrafast Laser Ablation of Indium Tin Oxide with Transient Optical Properties1
Integration of Diffractive Optics for Top-Hat Generation and En-hanced Depth of Focus1
New Approach for Monitoring a Direct Laser Interference Patterning Process Using a Combination of an Infrared Camera and a Diffraction Measurement System1
Ultrahigh Precision Machining of Polymer Surface using Laser-Induced Reactive Micro-Plasmas1
Dimensionless Enthalpy as Characteristic Factor for Process Control in Laser Powder Bed Fusion1
A Multi-Scale Model for Ultra Short Pulsed Parallel Laser Structuring — Part I. the Micro-Scale Model1
Rapid Fabrication of Glass Micro and Nanostructures via Laser-assisted Hot Embossing1
Water Jet Guided Laser vs. Conventional Laser: Experimental Comparison of Surface Integrity for Different Aerospace Alloys1
Influence of Structure Size and Geometry on Wetting Behavior of PMMA Surfaces Imprinted with Laser-Textured Stamps1
Direct Laser Writing of Functional Optofluidic Elements in Porous Silicate Matrix1
Free-Form Micro-Lens Array Fabrication via Laser Micro-Lens Array Lithography0
Micromechanism of High-temperature Fatigue Properties of Inconel 718 Nickel-based Alloy Treated by Laser Peening0
Glass Welding with Ultrashort Laser Pulses Producing mm-long Filaments0
Laser Direct Writing of Conductive Carbon Microelectrodes and Micro-Supercapacitor Applications0
A Study on the Enhancement of Chemical and Mechanical Properties of Low Carbon Steel Surface Cleaned with a Nanosecond Pulsed Laser0
UV-Laser Treatment of Thermoplastic CFRP Parts for Paint Applications0
Minimizing Defect on Ti Thin Film Laser Ablation using Square Flat-top NIR Femtosecond Laser for Thin Film Transistor of µ-LED Repair0
Parametric Study of Ultrasuperhydrophobic Nanotextured Microstructured Surface Topographies Produced by Picosecond Laser Micromachining on H13 Tool Steel0
Fabrication of Breathable Film Using Diffractive Multi-beam Nanosecond Laser Patterning of Polypropylene Film0
Preparation of Manganese Phthalocyanine Nanoparticles by Laser Ablation in Liquid and Application to Bioimaging0
The Design and Evaluating Method for The Scanning Strategy in Nano-second Laser Milling of Axisymmetric 3D Structure Micro Cone Consid-ering Its Symmetric Errors0
Synthesis of CeO2/rGO Nanocomposites by Laser Ablation in Liquid Method and the Characterization for Advanced Materials Development0
Beam Shaping and Power Handling of an Spatial Light Modulator System for Laser Induced Periodic Surface Structuring Texturation0
Femtosecond Laser Slicing of Single Crystal AlN Layer Grown by Hydride Vapor Phase Epitaxy on an AlN Substrate Generated by Physical Vapor Transport0
Room Temperature Space-selective Precipitation of Silver Nanoparticles inside Tb³+-doped Silica Xerogels using Femtosecond Laser0
Surface Modification of Addition Manufactured Ti–6Al–4V Alloys by Ultraviolet Pulsed Laser Scanning Technique: Morphologies, Roughness And Electrical Properties0
Intensity and Time Resolved Scattered Laser Radiation Monitoring in Single Pulse Micro-Drilling as a Method for Quality Control0
Characterization of Femtosecond Laser-induced Structural Changes in CVD Diamond by Raman Spectroscopy0
Direct, Laser-based Production of Optics0
Formation of Sub-100 nm Femtosecond Laser-Induced Periodic Fine Structures on Laser Powder Bed Fusion Fabricated Stainless Steel0
Time-Resolved Pump–Probe Imaging of Ablation Phenomena in Silica Glass Using Visible Femtosecond Laser0
Drilling of CFRP with Reduced and Non-Directional Heat-Affected Zone by Using 3-kW CW Single-Mode Fiber Laser0
Preparation of Hexagonal-Boron Nitride Nanoparticles by Laser Ablation in Liquid and their Properties0
Impact of Molten Pool Dynamics on Resultant Surface Structures During Direct Laser Interference Patterning0
Selective Laser Thermoregulation System for Accelerated Deg-radation Test of SiC/SiC CMCs0
Numerical Simulation of Micro-Flow Surface Smoothing of Fused Silica by CO2 Laser0
Processing of Hierarchical Structures on Stainless Steel by Direct Laser Interference Patterning0
Sensor Fusion for Position Estimation in Robot-based Laser Material Processing0
Analyzing the Electromagnetic Radiations Emitted during a Laser-based Surface Pre-Treatment Process for Aluminium using Diode Sensors as an Approach for High-Resolution Online Monitoring0
Improving the Processing Efficiency of Femtosecond Laser Sulfur Hyperdoping of Silicon by Diffractive Beam Shaping0
Laser-Induced Forward Transfer of Ni-rich NiTi Alloys for Shape Memory Applications0
Single Track Ultra-short Pulsed Laser Ablation on Additive Manufactured Metallic Surfaces0
Platform for Adaptive Integration of Data-Driven Models And Simulations Into Ultra Short Pulse Manufacturing Systems0
Realization of High Aspect Ratio Anti-reflection Structures via Laser Irradiation inside Liquid0
Electron Collision Rate in Ultrashort Laser – Metal Interaction Inferred from Reflectivity Measurements0
Laser Ablation of Copper and YAG:Ce Targets in Liquid PDMS, Studied by Shadowgraph and Photoluminescence Imaging0
Effective Time of Nanogratings Formation on Sol-Gel Films by Two-Beam Laser Interference0
Estimate Pulsed Laser Drilling Aluminum Nitride (AlN) Ceramic: A Thermal Simulation and Experimental Analyze0
Multi-Beam Processing with Individually Addressable Beamlets: Calibration & Data Processing0
In-Situ Analysis of Heat Accumulation during Ultrashort Pulsed Laser Ablation0
Effect of Laser Irradiation of TiO2 Particles and Their Property of Decomposition of Methylene Blue0
Intra-Burst Interaction During Ultrashort Pulsed Laser Structuring of Metals with Variable Temporal Pulse Spacing0
Influence of the Laser Beam Shape on Laser-Induced Periodic Surface Structure Formation Assisted by Surface Plasmon Polariton0
Rapid Method Using Deep Learning with Multi-focus Microphotographs to Measure Submicrometric Structures and Its Evaluation0
Time-resolved Spectroscopy of Glass Ablation during Micro-via Processing using 248 nm Excimer Laser for Semiconductor Interposer Packaging0
Titanium Surface Nanostructuring by Picosecond Laser Irradiation for Surface Improvement of Dental Abutments0
Hydrophobic and Hydrophilic Surfaces Created by Nanosecond Laser Structuring0
Photoinduced Structural Change in MgO Single Crystal0
Thickness Dependence of Laser Damage in Silicon Thin Films0
Processing of Functional Texturing on Micro-fibers by Laser-induced Micro/Nanoscale Surface Topographies0
Wetting of Lubricants on Cemented Tungsten Carbide Surfaces with Surface Structures Produced with Ultrashort Laser Pulses0
Preparation of Microstructured Surface of Pyrolytic Carbon by Laser and Its Blood Compatibility Application0
Surface Modification of Forming Tools for Aluminum Sheet Metal Forming0
Development of High-power Infrared Laser Capable Phase-only Spatial Light Modulator0
Beam Shaping the Direct Laser Interference Patterning Spot0
Fundamentals of a New Sub-Diffraction Direct Laser Writing Method by a Combination of Stimulated Emission Depletion and Excited State Absorption0
Design an Asymmetrical Three-Beam Laser Interference Lithography for Fabricating Micro- and Nano-Structures0
In-Situ Pulsed Laser Interference Nanostructuring of Semiconductor Sur-faces0
Surface Characterization of Thin Titanium Foils Processed by Femtosecond Laser Ablation in Liquids0
Artificial Intelligence for Estimating Laser Power from Temperature Distribution0
Formation of Fine Periodic Structures on Back Surface of Si Substrate by a Femtosecond Laser at 1552 nm0
Glass Molding Tools Fabricated with Selective Laser-induced Etching for Sustainable Treatment of Solid-State Electrolytes0
Automatic Image Analysis for Processing Marks in Femtosecond Laser Micromachining Using Concave and Convex (unevenness) Coefficien0
Classification of Photo-Acoustic Emission in Direct Laser Interference Pattering for Identifying the Spatial Period0
Numerical Simulation of Silicon Laser Ablation with GHz Bursts of Femtosecond Pulses0
Laser Surface Texturing of Metals Using Dynamic Melt Expulsion by Application of Fast Modulated CW-Laser Radiation0
Study of CO2 Laser-induced Thermal Stress Mechanisms on Decorative Soda-lime Glass0
Multibeam Micro-Drilling with High-Power Ultrashort Laser Pulses: 2-Stage Beam-Splitting Strategy and Implementation0
Modelling and Validation of Microstructure Replication on Aluminum Foils from Laser-Patterned Stamps0
Kinetics of Nanoparticles Formation Under UV, VIS and IR Nanosecond Laser Irradiation of a Silver-Ions-Enriched Glass0
Design and Implementation of OPU-based Laser Direct Writing Lithography System0
Microstructure Formation on Glass Substrates for High-productivity Fabrication of Micro-vias Using 248 nm Excimer Laser0
Formation and Its Mechanism of High-speed Micro-grooving on Metal Surface by Angled CW Laser Irradiation0
Raman Studies of Structural Changes in Diamond-like Carbon Films on Si Induced by Ultrafast Laser Ablation0
Topography Analysis and Homogeneity Quantification of Laser-Patterned Periodic Surface Structures0
Preparation of Gd2O3:Er,Yb Nanoparticles by Laser Ablation in Liquid and Their Optical Properties for Biomedical Application0
Pulse Duration and Wavelength Effects on the Surface Topography of Direct Laser Interference Patterning Treated Titanium Specimen0
Electrical Activation of Polymer Reny1002H Surface with Laser Irradiation for Molded Interconnect Devices0
4H-SiC Surface Modified by a Green Femtosecond Laser at Low Fluence0
Control of Plasma Confinement Layer for Effective Laser- peening0
Pulse Duration Dependence of Infrared Laser-Induced Secondary Electron Yield Reduction of Copper Surfaces0
Artificial Intelligence for Estimating Multiple Irradiation Conditions from Temperature Distribution0
Applicability of Laser Polishing on Inconel 738 Surfaces Fabricated Through Direct Laser Deposition0
Selective Area Nd:YAG Laser Functionalization of Digital Photocorrosion GaAs/AlGaAs Biosensor0
Super Hydrophilic Surface Fabricated on Alumina Ceramic by Ultra-fast Laser Microprocessing0
Femtosecond Laser Ablation Modeling of Tilted Microfeatures on Copper Surfaces0
Crater Formation and Damage Optimisation on Soda-Lime Glass for LIBS Analysis0
Fabrication of Pure Copper Rod by Multi-beam Laser Metal Deposi-tion with Blue Diode Lasers0
Effect of Scan Strategy on Mechanical Properties of AlSi12 Lattice Fabricated by Selective Laser Melting0
Improved Efficiency of an Adaptive Beam-Shaping Technique Based on Phase Gratings and Spatial Frequency Filtering0
Ultrashort Pulse Laser Surface Texturing for Injection Mold Functionalization0
High Power Water Jet Guided Laser Cutting of SiC/SiC Ceramic Matrix Composite0
Laser Cutting of Polymer Templates for Water-Droplet Induced Self-Folding of Cubes: Hinge Geometry Optimization0
Rapid µm ITO Electrode Patterning by Laser-direct Writing Using a Modest Commercial Fibre Laser Scriber0
In Situ Analysis of Ultrashort Pulse Burst Ablation via Transmission Pump Probe Imaging0
Enhancement of Glass Ablation Rate During Micro-via Processing using Very Long Pulse 248-nm Excimer Laser for Semiconductor Interposer Packaging0
Pulse Duration Dependence of Novel Metal Alloying on Fe/Cr/Ni Thin Films by Ultra-Short Pulsed Laser Irradiation0