Journal of the Taiwan Institute of Chemical Engineers

Papers
(The TQCC of Journal of the Taiwan Institute of Chemical Engineers is 15. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)
ArticleCitations
Black-odor water body remediations by ecological floating island coupled with Ecobase and Acinetobacter haemolyticus: Lab and pilot tests336
Development of a polyethyleneimine/poly(N-isopropylacrylamide) semi-IPN hydrogel for use in the temperature-swing adsorption and selective desorption of hydrophobic organic compounds144
Microengineered Polyketone-nylon membrane with thermal calendaring for nanomaterial rejection129
Editorial Board128
Comparison of oxidation absorption and reduction absorption process for sulfur recovery tail gas treatment of natural gas treatment plants in China Part Ⅰ: Technical section120
Preparation and characterization of Sm3+/Tm3+ co-doped BiVO4 micro-squares and their photocatalytic performance for CO2 reduction112
Optimization configuration of scrubber steel wire coils as porous materials for augmenting the performance of hemispherical distillers105
Targeted elimination of heavy metals from industrial wastewater: Synergistic effect of nano metal oxides104
A comprehensive laboratory measurement on the thermal characteristics of Ag–CuO–tungsten oxide/water nanofluid in mono, hybrid and ternary cases and presenting a new correlation102
Improving the anti-corrosive performance of an epoxy coating by ionic liquid modified layered double hydroxide nanocontainer93
Cellulose nanocrystals/zeolitic imidazolate framework-L (CNCs/ZIF-L) composites for loading and diffusion-controlled release of doxorubicin hydrochloride82
Ultra-sensitive zinc cobaltate assembled on N-rich carbon nitride electrochemical sensor for the detection of paraquat in food samples80
Response surface methodology as a statistical tool for optimization and FAME profile by GC-MS for assessing microalgae Scenedesmus quadricauda as a potential biodiesel feedstock77
Conversion of waste biomass to highly porous biochar for tricresyl phosphate removal: Adsorption performance study and exhausted adsorbent re-utilization77
Ciprofloxacin adsorption onto Pumice-bentonite composites: Modeling, kinetics, equilibriums and reusability studies76
Green solvent production of ethyl lactate via process intensification76
Co-silanization engineering to construct molecular diffusion barrier for copper metallization on silicon76
Numerical simulation of combined effects of a vertical magnetic field and thermal radiation on natural convection of non-Newtonian fluids confined between circular and square concentric cylinders74
Blood compatible, fog-, frost- and bacterial-resistant dopamine-enabled zwitterionic glass interfaces71
Novel CuFe2O4@NG composite for efficient sulfamethoxazole degradation in Fenton-like system: Directional non-radical degradation pathway switched via photo-assistant71
Expression of Weimberg xylose utilization pathway for succinate production by cyanobacteria under diurnal condition70
Study of functional perylene diimides for corrosion protection on aluminum alloy surfaces66
Magnesium chloride-modified potassium humate-based carbon material for efficient removal of phosphate from water64
Nanocrystalline copper for thermally efficient Cu-Cu bonding63
Residence time distribution experiments in a hybrid anaerobic blanket reactor treating real pharmaceutical wastewater63
Vacuum pyrolysis of Tamanu seed (Calophyllum inophyllum): Fuel properties, distillation, and composition study of the pyrolytic oil59
Assessment of the inhibitive performance of pyrimidine derivative for P110 steel in simulated formation water: Establishing the inhibition mechanism at an experimental and theoretical level59
Sn-doped Bi2WO6 for degradation of nitrophenol, Cr (VI) reduction and biomedical applications58
Waste valorization through acetone-butanol-ethanol (ABE) fermentation58
Enhancing wastewater treatment efficiency through hydrodynamic cavitation and advanced oxidation processes: Experimental insights and comparative analysis57
A bio-based one-component moisture curing polyurethane elastomer with ultrahigh mechanical strength and toughness based on multiple hydrogen bonds and dynamic boronate bonds57
COSMO-RS prediction, liquid-liquid equilibrium experiment and quantum chemistry calculation for the separation of methanol and dimethyl carbonate system using dihydrogen phosphate ionic liquids57
pH-responsive poly(acrylic acid) coated mesoporous silica nanoparticles for controlled abamectin release: Synthesis, characterization, and agricultural application56
Preparation of metal-organic framework/molybdenum disulfide-based nanomaterials and research on their electrorheological properties56
Trends on barrier characteristics improvement of emerging biopolymeric composite films using nanoparticles - A review55
Computational and Kinetics analysis of lead ions removal from industrial wastewater through natural bone powder55
Cascade Kinetic Model on Ethoxylation of Iso/Sec/n-Octanol Catalyzed by Alkali Hydroxides/Alkoxides and Its Experimental Verification54
Improvement in fouling behavior of polyacrylonitrile membrane using dome-shaped support fabricated via 3D printing54
Low-cost coal-based adsorbents for the removal of high concentrated ammonia nitrogen from real coking wastewater: Aiming at industrial application53
Promising organoselenium corrosion inhibitors for C1018-steel in hydrochloric acid environments52
Insight into the anti-corrosion performance of Daucus carota var. sativa hoffm extract as inhibitor for copper in sulfuric acid solution52
Phase, microstructure, and properties of fine-grained Mo-W-Cu alloys prepared by mechanical alloying and large electric current sintering52
Chemical analysis of hydrogen bonding in 4-methyl-2-pentanol + 1-alkanol binary complexes: Insights from thermodynamics and DFT analysis52
Recent progress in ceramic heat exchangers51
Performance improvement strategies of R1234yf in vapor compression refrigeration system as a R134a replacement: A review51
Stabilizing potassium ion batteries with RGO coated cathode architectures51
MoO3@ZIF-8 core–shell photocatalysts for the degradation of organic dye under visible-light irradiation50
Publisher note49
Soft sensor modeling based on masked convolutional transformer block deep residual shrinkage network49
Iron and nitrogen co-doped MXene quantum dots: A novel dual-mode electrochemical and fluorescence sensor for dopamine detection48
Real-time detection of sorafenib in human serum samples: An evaluation study via electrochemical sensing probe fabricated with silver stannate48
Recovery of phosphate and removal of Cr(VI) from water by calcium-modified panda manure biochar: Synergistic effect of adsorption and reduction47
Editorial Board47
Insights into the degradation of norfloxacin antibiotics on boron-doped diamond anode: Kinetics, pathways and mechanisms47
Measurement and correlation of isothermal vapor-liquid equilibrium for (−)-β-caryophyllene + p-cymene with dehydroabietic acid at 313.15, 323.15, and 333.15K47
Editorial Board46
IrO2-ZrO2-SiO2 ternary oxide composites- based DSAs: Activity toward oxygen evolution reaction with long-term stability46
Exploring MicroRNA's role in enhancing lipid biosynthesis in microalgae for green energy production46
Deep purification of low concentration fine particles in a cross flow rotating packed bed46
A versatile microfluidic intermediate delivery reservoir for isolating fluid dynamics in serially interconnected microfluidic networks46
Preparation and optimization of nanocomposite membranes for ethanol dehydration via pervaporation by using response surface methodology44
Experimental determination of liquid-liquid equilibrium and interaction insights for ternary mixtures 2,2,2-trifluoroethanol + water + pyridinium-based ionic liquids44
Microwave plasma enhanced chemical vapor deposited vertical carbon nanoflakes electrodes for electric double layer capacitors44
Structural, electronic, optical, and thermoelectric properties of CsPbI3-yBry (y = 0.5, 1.5, 2.5) compounds: First-principle study44
Constructing Ag2S/Al-doped Zn vanadate p-n heterostructure for enhanced photocatalytic redox performance44
Photocatalytic application of defective WO3 nanoparticles for precious metal recovery from plating effluent44
Construction of a microelectrochemical sensor for simultaneous detection of depression biomarkers cortisol and BDNF based on a thiazole-based covalent organic framework44
Machine learning predicts properties of hydrochar derived from digestate44
A precision intelligence system to explore GHG integration prevention and control in inclined extremely thick coal seam: Current status and challenges ahead43
Reprint of “Characteristics and electrochemical performance of copper/graphite felt composite electrodes for vanadium redox flow battery”43
Nickel doped ZIF-67 catalyst for the catalytic reduction of environmental pollutant, 4-nitrophenol43
Characterization of nasal aerodynamics and air conditioning ability using CFD and its application to improve the empty nose syndrome (ENS) submucosal floor implant surgery–Part II virtual surgery42
Real-time optimization of continuous catalytic reforming using transfer learning and reinforcement learning for feedstock variability42
Faradaic electrochemical impedimetric analysis on MoS2/Au-NPs decorated surface for C-reactive protein detection42
Optimization and test study of centripetal pump in disc-stack centrifuge based on flow field analysis41
Aerogels in wastewater treatment: A review41
Unveiling the potential of Bacillus cereus for the biodegradation of antibiotic metronidazole in aqueous solutions41
Computational fluid dynamic analysis of graphene oxide/water nanofluid heat transfer over a double backward-facing microchannel41
Synthesis of core-shell magnetic mesoporous silica nanoparticles to disperse amine functionalities for post-combustion carbon dioxide capture41
Revisiting the softening and melting behavior of sinter under simulated blast furnace conditions: Part II – Characteristics of microstructure evolution and grain coarsening41
Compensation of accuracy by increased data “thickness” for high timeliness in fault diagnosis of chemical process41
Coincident augmentation and alignment of lamellar stacking structures for rapid fabrication of solid-state polymer photonic crystal films40
Aloe vera extract mediated hydrothermal synthesis of rose-like copper iron sulfide for efficient oxygen evolution reaction40
Solar radiative MHD transformation of a Sutterby hybrid nanofluid flow using modified Buongiorno's nanomaterial model over a stretched surface40
Catalytic performances of SmCoO3 perovskite-type catalysts supported on cordierite in volatile organic pollutant oxidation40
Mixing performance of a non-Newtonian fluid in a coaxial agitated impeller reactor40
Machine learning-based prediction and optimization of effective removal of tetracycline from wastewater using magnetic MoS2/polyglucosamine/β-cyclodextrin nanocomposite40
Granger causality analysis using error correction model for root cause diagnosis in non-stationary industrial processes40
Editorial Board39
Synthesis and advances of smart heteroatom-sited coatings for anticorrosion applications39
Modeling and prediction of key parameters of circulating fluidized bed boiler based on Transformer39
Synthesis of Pd-Fe2O3 nanoflakes nanocomposite for superior energy storage device39
A novel salt-swelling nanofiltration membranes for drinking water purification: High mineral ions passage and efficient organic removal39
Editorial Board39
Pyrazole-based schiff bases as high-performance corrosion inhibitors for mild steel: Experimental and theoretical insights39
Separation of glatiramer acetate and its monomers utilizing aqueous biphasic systems based on glucose/sucrose and acetonitrile38
The impact of palmitoyl glycyl-histidyl-lysine on phospholipid model membranes38
Hybrid lipid bilayer platform with restricted flip-flop for probing surfactant-induced membrane disruption: towards biofouling-resistant membranes38
Reprint of “Optimizing aeration efficiency and forecasting dissolved oxygen in brackish water aquaculture: Insights from paddle wheel aerator”38
Low-crystalline CoCu–MgAl oxide nano sheet heterostructures immobilized by crab shell-derived phosphorus-doped carbon for hydrazine dehydrogenation38
Investigation on the urea deposits formation in the selective catalyst reduction system of a marine high-power engine38
Artificial intelligence as a novel tool for enhancing the performance of urine fed microbial fuel cell as an emerging approach for simultaneous power generation and wastewater treatment37
Highly-impressive performances of novel NiCo2O4/Bi2O3/Ag2ZrO3 nanocomposites in photocatalysis system, removal pathway, toxicity estimation, and antibacterial activities37
Preparation of three Brønsted acid metal-organic frameworks and their use as catalysts in esterification reactions37
Effect of Ce doping on the magnetic properties of LaFeO3 nanofibers36
Surface and interfacial properties of poly(methyldiallylammonium chloride): Effect of hydrophobic pendant and synergism (KI) on corrosion of C1018CS in 15% HCl36
Mesostructured ellipsoidal capsules barium stannate based perovskite photocatalysts anchored PtO nanoparticles for hydrogen evolution36
Intimate coupling of 3D MnFe2O4 cubes on 1D ZnO nanorods for sustainable photocatalysis under visible light: Computational analysis of reactive sites and degradation pathway36
Entropy generation and forced convection analysis of ethylene glycol/MWCNTs-Fe3O4 non-Newtonian nanofluid in a wavy microchannel with hydrophobic surfaces36
Enhancing photocatalytic performance for H2O2 production and lignin C C bond cleavage via designing carbon nitride-based homojunction photocatalysts36
Multi-function passivation of amino acid at the interface of perovskite and electron transport layer for n-i-p perovskite solar cells36
Enhancing PEDOT modified electrode for tartrazine sensing through the immobilization of MIL-100(Fe) metal-organic framework35
Multilayer self-healing coatings based on in-situ LDH films and inhibitor-loaded nanofibers for enhanced corrosion protection of copper35
Design and preparation of three-dimensional core-shell structures CF@Cu-BDC@NiCo-LDH for high-performance battery-type supercapacitors and oxygen evolution reaction35
Electroviscous effects in pressure-driven flow of electrolyte liquid through an asymmetrically charged non-uniform microfluidic device35
Interfacial nanoarchitectonics of SiOx via CVD carbon coating and vapor-phase polymerized PEDOT for enhanced lithium-ion battery anode performance35
A flexible, filtration-enabled, and low-background paper-based SERS substrate coated with perovskite quantum dots and evaporated silver for highly sensitive and versatile detection35
Construction of magnetic COF composites for lead removal with fast dynamics and superior capacity35
Process development of guava leaves with alkali in removal of zinc ions from synthetic wastewater35
Intelligent identification method of chemical processes based on maximum mean discrepancy domain generalization35
Development and characterization of biodegradable packaging films based on sodium alginate, Iota-carrageenan and latex blends for packaging applications35
Nanoarchitectonics of europium vanadate nanoparticles decorated carbon nanofibers for electrochemical detection of fungicide in fruits34
Molecular dynamics method to investigate the interaction energy and mechanical properties of the reinforced graphene aerogel with paraffin as the phase change material in the presence of different ext34
Decoding linker contributions in solid state synthesis of MOF-derived NiCo2O4/NiO/C composites for efficient electrocatalytic OER: Machine learning assisted prediction and forecasting of device stabil34
Elucidation on supporting effect of WO3 over MCF-Si and SBA-15 catalysts toward ethanol dehydration34
Study on the effects of dopamine-modified electroplating bath on the performance of copper plating on carbon fiber surfaces34
Effect of substitution on corrosion inhibition properties of 4-(substituted fluoro, chloro, and amino) Benzophenone derivatives on mild steel in acidic medium: A combined Electrochemical, surface char34
Comparison of enhanced neural network and response surface models in predicting bio-dissolution of aluminum and vanadium from bauxite residue by isolated Aspergillus niger strains34
Recyclable CF-supported SnS2/MIL-101(Fe) Z-scheme heterostructure photocatalyst for simultaneous removal of antibiotics and Cr(VI): Performance and mechanism insight34
Manipulating the charge transfer pathway in a dual Z-scheme BiOBr/g-C3N4/V2O5-Al2O3 heterojunction toward efficient degradation of textile dyes34
Metal-free β-ketoenamine-based conjugated microporous polymers: rational design of robust photocatalysts for efficient organic pollutant degradation33
Editorial Board33
Tuning annealing temperature to improve the sensing performance of single-walled carbon nanohorn-modified electrodes for simultaneous detection of ascorbic acid, dopamine, and uric Acid33
Enhanced photocatalytic degradation activity of ZIF-8 doped with Ag2WO4 photocatalyst33
Transition metal, rare earth and nonmetal Si modification to engineer efficient and durable Nb2O5-Fe2O3-MOx mixed oxides for catalytic combustion toluene and chlorobenzene33
Distributed status evaluation method based on evidence revision fusion33
Life cycle assessment and techno-economic analysis of nanotechnology-based wastewater treatment: Status, challenges and future prospectives33
Fabrication of novel 4-methyl-5-thiazoleethanol covalently-linked graphene oxide composite with adsorption selectivity for Cu2+ from aqueous solutions33
Study on volatilization kinetics of mercury in mercury-containing solid waste33
Cavern development characteristics of pseudoplastic fluid in a stirred tank with dual-impellers33
Optimization the TIT profile in an annular combustion of a turbojet engine based on smart modeling and CFD simulation32
Engineering nanoarchitectonics of β-carotene particles via coaxial nozzle-assisted supercritical CO₂ anti-solvent process using liquefied dimethyl ether as a green solvent32
Hyaluronic acid-decorated Fe3+-based metal-organic framework nanoparticles carrying juglone with dual-mode glutathione depletion to enhance tumor-targeted chemodynamic-chemo combination therapy32
Molecular interactions in ethyl caprate and 2-alcohol: Extended hard sphere framework32
Employing economic model predictive control for improving efficiency of the batch reactor carrying out decomposition of the Di-Cumyl-Peroxide32
Indoor thermal comfort analysis of TABS with untreated natural ventilation in a warm and humid climate – An experimental study32
Direct extraction of biphasic organosolv lignin for producing aromatic aldehydes via alkaline oxidation32
Size-dependent antibacterial efficacy of silver nanoparticles from a green synthesis method: Effects of extract quantity and origin32
Ionic-liquid-assisted synthesis of Fe/Co diatomic catalysts on hollow carbon nanospheres for lithium–sulfur batteries32
Fabrication of high-performance non-enzymatic sensor by direct electrodeposition of nanomaterials on porous screen-printed electrodes31
The dual strategy of hydroxylation modified Si-O-C bond cooperation and π-π stacking: Efficient photocatalytic degradation of tetracycline31
Exergy and exergoeconomic evaluation and optimal design of a solar-powered system integrated with PEM fuel cell and TEG for cleaner production31
Interface engineering of ruthenium-supported sulfur-doped graphitic carbon nitride for ultrasensitive electrochemical determination of riboflavin31
Adsorption performance and mechanism of polyamidoxime-coated glucose derived biochar for separation of uranium from nuclear wastewater31
Transition metal promoted palladium-catalyzed oxidative carbonylation of phenol to diphenyl carbonate31
Insights of recent developments in microplastics pollution and its degradation in wastewater and other environment31
Catalytic methane halogenation by bromine over microporous SAPO-34 zeolite material towards methyl bromide, dibromomethane and hydrogen bromide31
Adsorption films based on indazole derivatives for application to protect Cu in sulfuric acid: Experimental and theoretical approaches31
A bivariate Gompertz model quantifies the growth kinetics of Navicula lanceolata31
Selective cobalt extraction from waste lithium-ion battery leachate using metal-organic framework composites31
Cellulose based pH-responsive smart membrane for selective removal of oil and water30
Tailoring 0D-C60 – Co-MnO2 interfaces for superior bifunctional water electrolysis30
Enhanced removal of ciprofloxacin antibiotic using agricultural byproduct-derived biochars: From studies on adsorption kinetic, isotherm and thermodynamic to explore mechanistic insights into the remo30
Construction of novel and noble-metal-free WC/CdIn2S4 Schottky heterojunction photocatalyst for efficient photocatalytic H2 evolution30
Eco-friendly synthesis of bio-supported silver nanoparticles over magnetic chitosan: An efficient recyclable catalyst for N-substituted tetrazoles synthesis30
Surface migration of long-chain alkanes in waterborne polyurethane for robust, fluorine-free superhydrophobic cotton fabrics30
Unraveling the inhibitive performance and adsorption behavior of expired compound glycyrrhizin tablets as an eco-friendly corrosion inhibitor for copper in acidic medium30
Intermolecular dynamics and quantum insight of lithium perchlorate in the deep eutectic solvent (DES) solutions with nitriles for energy storage applications30
Green corrosion inhibition: Tobacco stem extract and KI on steel in H₃PO₄ – experimental, modeling, and theoretical insights30
MOF-808(Zr)-supported with Keggin Polyoxometalates as an efficient oxidative desulfurization catalyst30
An overview of electrochemical sensing strategies for methylparaben analysis30
DFT and experimental investigations on the photocatalytic mechanism of C3N4-MQDs/BWO heterojunction for Tetracycline degradation30
Acid-functionalized porous polymer as an adsorbent for the highly efficient removal of ammonia nitrogen from aqueous solutions30
Experimental investigation of the hydro-thermal efficiency of the non-Newtonian ferrofluid in the annulus heat tube under the influence of the non-uniform magnetic fields30
Root cause diagnosis of plant-wide oscillations based on fuzzy kernel multivariate Granger causality30
Substrate-independent fabrication of superhydrophilic membrane based on dopamine methacrylamide and zwitterionic substance for effective oil-in-water emulsion separation30
Electrospun LaFe1+XO3 nanotubes for enhancing gas sensing to n-butanol30
Comprehensive study of synergistic corrosion inhibition for XC48 steel in acidic medium using cistus creticus extract and iodide ions: Integrative experimental and computational analysis30
Synergistic catalysis of graphitic carbon nitride and dichromate for augmented oxidative polymerization of hydroquinone leading to enhanced humic-like substance formation29
Plasmon-enhanced CsPbBr3 crystal photodetectors: Angle-dependent light coupling and waveguided excitation29
An impact of sea sponge-derived hard carbon with the symbiosis of sodium ion battery and biomedical applications29
Mild routine to prepare Fe-Mn bimetallic nano-cluster (Fe-Mn NCs) and its magnetic starch-based composite adsorbent (Fe-Mn@SCAs) for wide pH range adsorption for Hg(Ⅱ) sewage29
Rational design of amine-terminated terephthalate in bismuth metal-organic framework for boosting sunlight-catalytic removal of organic pollutants29
Bio-carbon anchored praseodymium molybdate microflowers for sensitive detection of xanthine in biofluids and fish meat29
Experimental investigation and machine learning prediction of thrust, fuel consumption, and emissions for micro gas turbine engine fueled with biofuel and hydrogen- A comparative study of linear regre29
Corrigendum to “Eco-friendly and low-cost homogeneous cation exchange membranes functionalized by sodium dodecyl sulfate and applied in fine desalination” [Journal of the Taiwan Institute of Chemical 29
Editorial Board29
Enhancing biomass and lipid production in Chlorella sorokiniana via magnesium metal-organic framework of Mg-MOF-7429
Intrinsic thermal hazard analysis of tetrazole energetic compounds: A macroscopic-microscopic investigation perspective29
Development of a copper-chelated ZIF-67 framework to effectively catalyse oxidative coupling between N-arylmaleimides and N,N-dimethylanilines29
Transforming β-cyclodextrin into a non-conventional luminophore via H2O2 oxidation and its application in detection of tetracyclines29
Synthesis and capacitive properties of nano-layered MoSSe/Nitrogen-doped RGO/Nickel foam electrode for enhanced-performance battery-like supercapacitors with coin cell design29
Catalytic potential of sustainable dinuclear (Cu2+ and ZrO2+) metal organic incorporated frameworks with comprehensive biological studies29
Numerical investigation of the effect of swirling flow caused by twisted tape in impinging jet's nozzle on heat transfer: Application in cooling of electronic components and turbine blades29
Editorial Board29
The entropy generation analysis and optimization of a water/silver nanofluid flow inside a photovoltaic thermal collector considering plain, ribbed, and porous-ribbed absorber tubes29
Editorial Board29
Efficient CF4 adsorption on porous carbon derived from polyaniline29
Harnessing algal power: Algal membrane photobioreactors revolutionizing toxic wastewater matter separation and treatment–A comprehensive review29
Investigation on the decomposition kinetics, thermal safety and mechanism of the nitration products of m-xylene: experiment and DFT calculations28
A review on fabrication and in vivo applications of piezoelectric nanocomposites for energy harvesting28
Hydrophobic tuning of PDMS-PVDF hollow fiber membranes for enhanced isopropanol recovery in pentane diol production process via pervaporation28
Preparation of 3D-printed gastric models with biomimetic mechanical, topographical and fluid dynamic properties28
Cooperation of phytoene synthase, pyridoxal kinase and carbonic anhydrase for enhancing carotenoids biosynthesis in genetic Chlamydomonas reinhardtii28
Unlocking the potential of FTIR for corrosion inhibition prediction exploiting principal component analysis: Machine learning for QSPR modeling28
Design amorphous solid dispersion microparticle of aripiprazole in polyvinylpyrrolidone using the supercritical antisolvent process28
An interfacial networked self-cleaning membrane based on 2D/2D C-g-C3N4/BiVO4 heterojunction for photocatalytic degradation of tetracycline28
The rising behavior of a bubble loaded by a single particle in various liquids28
Interface design strategy in combined materials of lithium thiophosphate electrolyte for solid-state lithium-ion batteries applications28
Composite micelle induced biomass self-assembly into N, S co-doped hierarchical porous carbon spheres with tunable properties for energy storage27
Functionalization of SBA-15 mesoporous silica for highly efficient adsorption of glutathione: Characterization and modeling studies27
Alkali modification and nitrogen doping synergistically regulate sludge-derived biochar for persulfate activation and organic pollutant degradation27
Generalized IMC-PD decoupled dual-loop control of delay-dominated chemical systems using stability-constrained crayfish optimization27
Performance analysis of modified solar still with parabolic reflector and nanofluids27
Development of alkali-etched ZIF-67 metal-organic framework composite incorporated PVDF UF membranes for efficient wastewater treatment27
Bio-inspired thermal responsible liquid crystal actuators showing shape and color variations simultaneously27
Hydrothermal synthesis and ionic sensing properties of graphitic carbon nitride quantum dots27
Formosan subterranean termite-inspired unidirectionally inclined conical structure arrays for directional transport of fog droplets27
Experimental and theoretical insights into enhanced light harvesting in dye-sensitized solar cells via Au@TiO2 core-shell and BaTiO3 nanoparticles27
Impact of sludge density and viscosity on continuous stirred tank reactor performance in wastewater treatment by numerical modelling27
Tin-tuned ZnO nanoparticles for dual-mode environmental remediation: UV and solar driven RR 120 dye breakdown and microbial control27
Interfacial optimization of LATP/PVDF-HFP composite electrolytes for enhanced performance in carbon-coated LMVP based quasi-solid-state batteries27
Parameter identification of PV and PEMFC systems using the smart butterfly optimization algorithm27
Electrochemical corrosion mitigation of copper in 3.5 wt.% NaCl solution using cerium (III) chloride salt26
Nanoparticle-assisted removal of EBT dye from textile wastewater: Towards sustainable green gram seedling cultivation26
Machine learning and modelling approach for removing methylene blue from aqueous solutions: Optimization, kinetics and thermodynamics studies26
Functional group engineering of UiO-66 MOFs: Dual control of morphology and surface chemistry for high-flux, stable oil–water separation membranes26
Synthesis of a “turn-on” fluorescent polymer probe, preparation and reusability of its test paper on metal ions detection26
Design and synthesis of straw-based ion-imprinted adsorbent for efficiently selective adsorption of Gadolinium ion26
Rod-shaped MoC-decorated CdS for boosted visible-light-driven H2 production26
Developments in the utilization of heterogeneous catalysts for biodiesel generation: An update on recent advancements26
Exploring the potential of dual-sensitive hydrogels for personalized precision medicine applications26
Designing ion pair amphiphiles for biomimetic bilayer formation via the Law of Matching Water Affinity26
Self-cleaning application of mesoporous ZnO, TiO2 and Fe2O3 films with the accommodation of silver nanoparticles for antibacterial activity26
MoO3 based nanocomposites for the photocatalytic degradation of colourants – A review26
Self-powered piezoelectric ultraviolet photodetectors based on TiO2-NFs:P(VDF-TrFE) nanocomposites via ultraviolet-assisted thermal annealing for the prevention of ultraviolet overexposure26
Functionalized metal-organic framework UIO-66 nanocomposites with ultra-high stability for efficient adsorption of heavy metals: Kinetics, thermodynamics, and isothermal adsorption26
Facile synthesis of calix[4]arene-based polymer for effective removal of cationic dyes and antihistamines from water25
Experimental study and machine learning simulation of Pb (II) separation from aqueous solutions via a nanocomposite adsorbent25
Catalytic pyrolysis of corncob with Ni/CaO dual functional catalysts for hydrogen-rich gas25
Enhancing the stability of a cobalt-based Fischer–Tropsch synthesis catalyst using g-C3N4-coated SBA-15 as support25
Investigation of the flow patterns and mixing efficiency in a stirred tank through particle image velocimetry25
Corrigendum to “Internal corrosion in oil and gas wells during casings and tubing: Challenges and opportunities of corrosion inhibitors” [Journal of the Taiwan Institute of Chemical Engineers, Volume 25
Novel heat transfer fluid for maximum recovery of heat of compression: A steady state analysis on improving the performance of liquid air energy storage25
Facile synthesis of Co, Fe-bimetallic MIL-88A/microcrystalline cellulose composites for efficient adsorptive and photo-Fenton degradation of RhB dye25
Nitrogen removal from urea effluent in an anammox sequencing batch biofilm reactor with valorised dishwashing scrubber as biocarrier25
Heat transfer enhancement through pulsating nanoparticles in tubes: DPM-CFD and data-driven ANN study25
Slippery liquid-infused porous surface by ZnAl-layered double hydroxide on AZ31 Mg alloys25
Nitrogen-doped 3D micro-coral Cd(O,S) for highly efficient zero-VRHE solar-to-hydrogen photocathode25
Enhancing low-temperature CO2 methanation via a dual anchoring impregnation strategy for highly dispersed Ni-Ce/SBA-15 catalysts25
0.20676302909851