New Carbon Materials

Article	Citations
The oxidation reaction mechanism and its kinetics for a carbonaceous precursor prepared from ethylene tar for use as an anode material for lithium-ion batteries	191
A new anode material for high rate and long life lithium/sodium storage	113
Preparation and lithium storage of anthracite-based graphite anode materials	104
A review of carbon-supported single-atom catalysts for electrochemical reactions	82
The preparation and use of γ-graphdiyne, a superb new photoelectrocatalyst	49
Controllable construction of CoP nanoparticles anchored on a nitrogen-doped porous carbon as an electrocatalyst for highly efficient oxygen reduction in Zn-air batteries	47
Review of H2S selective oxidation over carbon-based materials at low temperature: from pollutant to energy storage materials	47
Graphdiyne: Synthesis, modification and application of a two-dimensional carbonaceous material	43
A wet granulation method to prepare graphite particles with a high tap density for high volumetric energy density lithium-ion storage	41
Synthesis of size-controlled carbon microspheres from resorcinol/formaldehyde for high electrochemical performance	40
Recent advances in producing hollow carbon spheres for use in sodium−sulfur and potassium−sulfur batteries	39
Applications of nanocarbons in redox flow batteries	38
Design, progress and challenges of 3D carbon-based thermally conductive networks	38
Preparation of highly graphitized porous carbon and its ethane/ethylene separation performance	38
In-situ observation of electrolyte-dependent interfacial change of the graphite anode in sodium-ion batteries by atomic force microscopy	37
Factors that influence the performance of hydrogen detectors based on single-wall carbon nanotubes	36
Recent advances in Mxene-based nanomaterials as hosts for high-performance lithium metal anodes and as additives for improving the properties of solid electrolytes	35
Supercapacitors based on nitrogen-enriched crumpled graphene with a high volumetric capacitance and high-mass-loading per area of the electrode	35
The regeneration of graphite anode from spent lithium-ion batteries by washing with a nitric acid/ethanol solution	35
A review of fluorescent carbon dots: synthesis, photoluminescence mechanism, solid-state photoluminescence and applications in white light-emitting diodes	35
An interfacial self-assembly strategy to fabricate graphitic hollow porous carbon spheres for supercapacitor electrodes	34
Encapsulation of sulfur inside micro-nano carbon/molybdenum carbide by in-situ chemical transformation for high-performance Li-S batteries	34
Construction of a flexible, integrated rechargeable Li battery based on a coaxial anode with a carbon fiber core encapsulated in FeNiMnO4 and a nitrogen-doped carbon sheath	34
Cardo poly (ether sulfone) toughened E51/DETDA epoxy resin and its carbon fiber composites	32
Co, N co-doped porous carbons as high-performance oxygen reduction electrocatalysts	32

Effect of surface functionalization on the surface and inter-facial properties of thermoplastic-coated carbon fibers	31
Effective solar-driven interfacial water evaporation-assisted adsorption of organic pollutants by a activated porous carbon material	31
Three-dimensional printed carbon-based microbatteries: progress on technologies, materials and applications	29
Development of biochar electrode materials for capacitive deionization: preparation, performance, regeneration and other challenges	28
Thermal conductivity of graphite nanofibers electrospun from graphene oxide-doped polyimide	28
Graphene with KI-modified pore structure and its electrochemical capacitors application	27
Research progress on metal and covalent organic framework-based materials for high-performance supercapacitors	26
Phosphorescent carbon dots: Microstructure design, synthesis and applications	26
The formation of uniform graphene-polyaniline hybrids using a completely miscible cosolvent that have an excellent electrochemical performance	25
Carbon-based metal-free oxygen reduction reaction electrocatalysts: past, present and future	24
Charge storage mechanisms of manganese dioxide-based supercapacitors: A review	24
A mini review: application of graphene paper in thermal interface materials	24
A high-frequency flexible symmetric supercapacitor prepared by the laser-defocused ablation of MnO2 on a carbon cloth	23
Fabrication of coal-based oxygen-rich porous carbon nanosheets for high-performance supercapacitors	23
Se with Se-C bonds encapsulated in a honeycomb 3D porous carbon as an excellent performance cathode for Li-Se batteries	23
Research progress on carbon-based materials for electromagnetic wave absorption and the related mechanisms	23
Photothermal catalysis in CO2 reduction reaction: Principles, materials and applications	22
High-surface-area porous carbons produced by the mild KOH activation of a chitosan hydrochar and their CO2 capture	22
Preparation of molded biomass carbon from coffee grounds and its CH4/N2 separation performance	21
Review of chemical recycling and reuse of carbon fiber reinforced epoxy resin composites	21
A review of polymer-derived carbon molecular sieve membranes for gas separation	21
A review of aligned carbon nanotube arrays and carbon/carbon composites: fabrication, thermal conduction properties and applications in thermal management	21
Bismuth nanoparticles anchored on N-doped graphite felts to give stable and efficient iron-chromium redox flow batteries	20
Preface	20
The in situ formation of ZnS nanodots embedded in honeycomb-like N-S co-doped carbon nanosheets derived from waste biomass for use in lithium-ion batteries	20
Sulfonyl chloride-intensified metal chloride intercalation of graphite for efficient sodium storage	20
A review of three-dimensional graphene networks for use in thermally conductive polymer composites: construction and applications	19
Understanding the process of lithium deposition on a graphite anode for better lithium-ion batteries	19
A review of graphdiyne: A new material for synthesizing effective adsorbents for aqueous contaminants	19
Preparation and performance of electrocatalytic carbon membranes for treating micro-polluted water	19
Cu-modified biomass-derived activated carbons for high performance supercapacitors	19
Electrochemical sensing of phenacetin on electrochemically reduced graphene oxide modified glassy carbon electrode	19
Reversible surface modification of PAN-based carbon fibers by a ferrocene-based surfactant	18
Two-dimensional layer materials for highly efficient molecular sensing based on surface-enhanced Raman scattering	18
A review of the high-concentration processing, densification, and applications of graphene oxide and graphene	18
Progress on graphitic carbon materials for potassium- based energy storage	18
Advances in graphene/molybdenum dichalcogenide-based van der Waals heterostructure photodetectors	18
A review of carbon-based catalysts and catalyst supports for simultaneous organic electro-oxidation and hydrogen evolution reactions	18
A correlation of the hydrogen evolution reaction activity to the number of defects formed by the decomposition of doped phosphorus species in carbon nanotubes	18
A review of the use of Mxenes as hosts in lithium metal anodes and the anode formation	18
A carbon catalyst doped with Co and N derived from the metal-organic framework hybrid (ZIF-8@ZIF-67) for efficient oxygen reduction reaction	17
Magnetic modification of used tea leaves for uranium adsorption	17
Research progress on recovering the components of spent Li-ion batteries	17
The synthesis of iron-nitrogen sites embedded in electrospun carbon nanofibers with an excellent oxygen reduction reaction activity in alkaline/acidic media	17
Preparation of a high-performance synthetic pitch from aromatic hydrocarbons containing N/Cl	16
Progress and prospects of graphene for in-plane micro-supercapacitors	16
Research progress on the effect of graphene oxide on the properties of cement-based composites	16
Carbon based electrocatalysts for selective hydrogen peroxide conversion	16
Research progress on carbon-based non-metallic nanomaterials as catalysts for the two-electron oxygen reduction for hydrogen peroxide production	16
Defect engineering of carbon-based electrocatalysts for the CO2 reduction reaction: A review	16

A review of the catalytic preparation of mesophase pitch	16
A review of covalent organic framework electrode materials for rechargeable metal-ion batteries	15
Research progress on graphene-based materials for high-performance lithium-metal batteries	15
Hydrophilic carbon monoliths derived from metal-organic frameworks@resorcinol-formaldehyde resin for atmospheric water harvesting	15
A DFT study of the effect of stacking on the quantum capacitance of bilayer graphene materials	15
A review of the synthesis of carbon materials for energy storage from biomass and coal/heavy oil waste	15
N/S co-doped carbon nanosheets for the efficient electrochemical extraction of uranium from seawater	15
Recent advances in multilevel nickel-nitrogen-carbon catalysts for CO2electroreduction to CO	15
The relationship between the high-frequency performance of supercapacitors and the type of doped nitrogen in the carbon electrode	15
Highly efficient Co−N−C electrocatalysts with a porous structure for the oxygen reduction reaction	15
Flexible and lightweight graphene grown by rapid thermal processing chemical vapor deposition for thermal management in consumer electronics	15
Recent progress of mesoporous carbons applied in electrochemical catalysis	14
Algae-based carbons: Design, preparation and recent advances in their use in energy storage, catalysis and adsorption	14
Status and development trends for fluorinated carbon in China	14
Reduced graphene oxide encapsulated MnO microspheres as an anode for high-rate lithium ion capacitors	14
Improving electron and ion transport by constructing 3D graphene nanosheets sandwiched between porous carbon nanolayers produced from resorcinol-formaldehyde resin for high-performance supercapacitor	14
Incorporating TiO2 nanoparticles into the multichannels of electrospun carbon fibers to increase the adsorption of polysulfides in room temperature sodium-sulfur batteries	14
Recent advances in porous carbons for electrochemical energy storage	14
Application and prospects for using carbon materials to modify lithium iron phosphate materials used at low temperatures	14
Research progress on the biomedical uses of graphene and its derivatives	14
Polyetherketoneketone/carbon fiber composites with an amorphous interface prepared by solution impregnation	13
A bimetallic sulfide Co9S8/MoS2/C heterojunction in a three-dimensional carbon structure for increasing sodium ion storage	13
Increasing the interlaminar fracture toughness and thermal conductivity of carbon fiber/epoxy composites interleaved with carbon nanotube/polyimide composite films	13
A comprehensive review of the 3D printing of sp2 carbons: Materials, properties and applications	13
In-situ thermal Raman mapping and stress analysis of CNT/CF/epoxy interfaces	13
A sustainable strategy to prepare porous carbons with tailored pores from shrimp shell for use as supercapacitor electrode materials	13
Research progress on freestanding carbon-based anodes for sodium energy storage	12
Preparation of fixed length carbon fiber reinforced plastic composite sheets with isotropic mechanical properties	12
3D printed freestanding ZnSe/NC anodes for Li-ion microbatteries	12
Regulating the radial structure of polyacrylonitrile fibers during pre-oxidation and its effect on the mechanical properties of the resulting carbon fibers	12
Polyimide-assisted fabrication of highly oriented graphene-based all-carbon foams for increasing the thermal conductivity of polymer composites	12
A novel gas diffusion layer and its application to direct methanol fuel cells	12
Topography changes and microstructural evolution of nuclear graphite (IG-110) induced by Xe26+ irradiation	12
Carbon-based flexible electrodes for electrochemical potassium storage devices	12
Synthesis and use of hollow carbon spheres for electric double-layer capacitors	12
A review of three-dimensional graphene networks for thermal management and electromagnetic protection	12
Pitch-based carbon materials: a review of their structural design, preparation and applications in energy storage	12
Optimizing the carbon coating to eliminate electrochemical interface polarization in a high performance silicon anode for use in a lithium-ion battery	11
Peat-derived nitrogen-doped porous carbons as photothermal-assisted visible-light photocatalysts for water splitting	11
Carbon-based current collector materials for sodium metal anodes	11
Advances in flexible sensors with MXene materials	11
Carbon materials for solar-powered seawater desalination	11
A new strategy for the efficient exfoliation of graphite into graphene	11
Recent progress in the carbon-based frameworks for high specific capacity anodes/cathode in lithium/sodium ion batteries	11
Controllable synthesis of 2D mesoporous nitrogen-doped carbon/graphene nanosheets for high-performance micro-supercapacitors	11
Recent advances in 3D interconnected carbon/metal high thermal conductivity composites	11
Micro/mesopore carbon spheres derived from sucrose for use in high performance supercapacitors	10
Increasing the interlayer spacing and generating closed pores to produce petroleum coke-based carbon materials for sodium ion storage	10
A review of nitrogen-doped carbon materials for lithium-ion battery anodes	10
Two extreme crystal size scales of diamonds, large single crystal and nanocrystal diamonds: Synthesis, properties and their mutual transformation	10
A review of 3D monolithic carbon-based materials with a high photothermal conversion efficiency used for solar water vapor generation	10
Engineering the interface between separators and cathodes to suppress polysulfide shuttling in lithium-sulfur batteries	10
Glycine-derived nitrogen-doped ordered mesoporous carbons with a bimodal mesopore size distribution for supercapacitors and oxygen reduction	10
The use of carbon-based particle electrodes in three-dimensional electrode reactors for wastewater treatment	9
The effect of the carbon components on the performance of carbon-based transition metal electrocatalysts for the hydrogen evolution reaction	9
Carbon materials for water desalination by capacitive deionization	9
Advanced design strategies for multi-dimensional structured carbon materials for high-performance Zn-air batteries	9
Research progress on carbon-based zinc-ion capacitors	9
Hydrothermal synthesis of carbon nanodots from waste wine cork and their use in biocompatible fluorescence imaging	9
Carbon-based electrocatalysts for water splitting at high-current-densities: A review	9
The potassium storage performance of carbon nanosheets derived from heavy oils	9
Porous silicon/carbon composites as anodes for high-performance lithium-ion batteries	9
A high-rate and ultrastable anode for lithium ion capacitors produced by modifying hard carbon with both surface oxidation and intercalation	9
KOH-treated mesocarbon microbeads used as high-rate anode materials for potassium-ion batteries	9
Progress in the research of carbon aerogel in photothermal conversion	8
Conversion of carbon nanotubes into curved graphene with improved capacitance	8
Modeling of pyrolytic carbon deposition from propylene	8
A review of the coefficient of thermal expansion and thermal conductivity of graphite	8
Synthesis of pitch-derived carbon anodes for high-performance potassium-ion batteries	8
A review of carbon material-based Z-scheme and S-scheme heterojunctions for photocatalytic clean energy generation	8
Recent advances in the electroreduction of carbon dioxide to formic acid over carbon-based materials	7
Research progress on tantalum carbide coatings oncarbon materials	7
Templating synthesis of porous carbons for energy-related applications: A review	7
A review of biomass-derived graphene and graphene-like carbons for electrochemical energy storage and conversion	7
Near-infrared emission carbon dots for bio-imaging applications	7
Preparation of graphene/copper nanocomposites by ball milling followed by pressureless vacuum sintering	7
Recent progress in the use of graphene/po lymer composites to remove oil contaminants from water	7
The synthesis of porous carbon material derived from coal liquefied residue and its electromagnetic wave absorption	7
A review of biomass-derived carbon materials for lithium metal anodes	7
Progress on carbonene-based materials for Zn-ion hybrid supercapacitors	7

Preparation and electrochemical properties of novel silicon-carbon composite anode materials with a core-shell structure	7
A review of the preparation and applications of wrinkled graphene oxide	7
Preparation of carbon nanotube/cellulose hydrogel composites and their uses in interfacial solar-powered water evaporation	7
Sulfonated graphene improves the wear resistance of pantograph carbon slider materials under normal and wet conditions	7
A flexible hard carbon microsphere/MXene film as a high-performance anode for sodium-ion storage	6
Design of a 3D CNT/Ti3C2Tx aerogel-modified separator for Li–S batteries to eliminate both the shuttle effect and slow redox kinetics of polysulfides	6
Chemical vapor deposition of two-dimensional transition metal sulfides on carbon paper for electrocatalytic hydrogen evolution	6
A Co3O4/graphdiyne heterointerface for efficient ammonia production from nitrates	6
One-pot modified “grafting-welding” preparation of graphene/ polyimide carbon films for superior thermal management	6
Non-layered transition metal carbides for energy storage and conversion	6
Preparation and electrochemical properties of Ni(OH)2/graphitized carbon nitride/graphene ternary composites	6
A review of porous carbons produced by template methods for supercapacitor applications	6
The role, formation and characterization of LiC6 in composite lithium anodes	6
Deposition of MnO2 on KOH-activated laser-produced graphene for a flexible planar micro-supercapacitor	6
Advances in the use of carbonaceous scaffolds for constructing stable composite Li metal anodes	6
Effect of the air oxidation stabilization of pitch on the microstructure and sodium storage of hard carbons	6
Preparation of a N-P co-doped waste cotton fabric-based activated carbon for supercapacitor electrodes	6