Acta Scientiarum-Technology

Papers
(The median citation count of Acta Scientiarum-Technology is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-10-01 to 2024-10-01.)
ArticleCitations
Effect of pH on the flaxseed (Linum usitatissimum L. seed) mucilage extraction process13
Evaluation of the teachers’ digital competences in primary and secondary education in Portugal with DigCompEdu CheckIn in pandemic times9
Skin cancer classification dermatologist-level based on deep learning model8
Statistical optimization of amylase production using grape fruit peels in submerged fermentation8
Exploratory analysis of bioactive compounds and antioxidant potential of grape (Vitis vinifera) pomace5
Green synthesis: characterization and biological activity of silver nanoparticles using aqueous extracts of plants from the Arecaceae family5
Use of carbonized corn cob biomass to reduce acidity of residual frying oil4
Production of antimicrobial biobased packaging and application in sliced cooked ham4
Fault current and fault voltage analysis of power transmission systems with high penetration of inverter-based wind generators4
Turmeric oleoresin encapsulated by spray drying in maltodextrin/gelatin and starch/gelatin blends: storage stability and water sorption4
Treatment of vinasse by adsorption on activated carbon from sugarcane bagasse agglomerated with Al2O34
Extracting feature requests from online reviews of travel industry4
Drying of foods under intermittent supply of microwave energy: proposal for a mathematical model3
In vitro effects of an Acanthophora muscoides (Ceramiales, Rhodophyta) native and modified sulfated polysaccharide fraction on thrombin generation3
Macronutrients, vitamins, minerals and bioactive compounds in fresh and dehydrated basil (Ocimum basilicum) and its hot and cold infusions3
Application of Arc-GIS, HEC-GeoHMS and HEC-HMS in a holistic sense for estimation of rainfall-runoff process: case study over Ballikaya Basin3
Use of the cyanobacterium Spirulina platensis in cattle wastewater bioremediation3
Study of the geotechnical behavior of soil-cement reinforced with plastic bottle fibers3
Bioactive compounds in the leaves of Baccharis dracunculifolia: extraction process and characterization3
Development of a low-cost weather station and real-time monitoring for automated irrigation management3
The impacts of climate change on rainfall modeling in the Pantanal of Mato Grosso do Sul3
Reconsidering green belts, green wedges and greenways3
Physicochemical properties, mineral and fatty acids composition of Jackfruit seeds flour of two varieties from Brazilian Midwest3
Thickness Influence of the Copper Powder Sintered Capillary Structure in the Thermal Performance of Heat Pipes2
The Physicochemical and sensory characteristics of Coppa with Bifidobacterium animalis ssp. Lactis (BB12) probiotic2
Dorsal hand vein biometrics with a novel deep learning approach for person identification2
Nano-silica added to Portland cement2
Streptomyces sp. K47 alkaline proteases: partial purification and analysis by zymography2
Flower stages, germination and viability of pollen grains of Annona squamosa L. in tropical conditions2
Adsorption of food dye using activated carbon from brewers’ spent grains2
Integrating corpus-based and NLP approach to extract terminology and domain-oriented information: an example of US military corpus2
Production and market comparison of urokinase and streptokinase as effective and cheap fibrinolytic agents for treatment of cardiovascular diseases2
Effect of autogenous GTAW on the reciprocating sliding wear behavior of a carbon martensitic steel2
An empirical research and comparative analysis of clustering performance for processing categorical and numerical data extracts from social media2
Combined Ensemble Intrusion Detection Model using Deep learning with Feature Selection for Fog Computing Environments2
Optimization of reinforced concrete columns via genetic algorithm2
Dam failure analysis according to different methods in HEC-RAS, Gökçe Dam, Turkey2
Influence of culture medium on growth and protein production by Haematococcus pluvialis2
Ergonomic analysis of biomechanical overloading: external coating activity using mortar2
Economic analysis of a cosmetic initiative addressing stochastic aspects and risk quantification2
Analysis of relative efficiency of vessels of passenger transportation in the Brazilian Amazon: an AHP-DEA approach2
Structure and share of satellite TV channels and DTH platforms in Europe2
Cross-cultural usability evaluation of AI-based adaptive user interface for mobile applications2
Evaluation of new Egyptian flaxseed genotypes and pasta fortified with flaxseeds2
Economic feasibility analysis for co-generation of power by diesel generator at peak time: Monte Carlo simulation approach in a hospital2
Agro-industrial waste as a source of bioactive compounds: ultrasound-assisted extraction from blueberry (Vaccinium myrtillus) and raspberry (Rubus idaeus) pomace2
Study of sediment transport in the Jordão River, located in the mesoregion of the Triângulo Mineiro-MG2
Formulation optimization of low-fat emulsion stabilized by rocket seed (Eruca Sativa Mill) gum as novel natural fat replacer: effect on steady, dynamic and thixotropic behavior2
A hybrid approach towards movie recommendation system with collaborative filtering and association rule mining2
Optimization of sizing of annual water storage reservoirs considering return period association1
Evaluation of the milk clotting potential and characterization of proteases from Aspergillus sp. and Pleurotus albidus1
Trend change estimation for interrupted time series with heteroscedastic and autocorrelated errors: application in syphilis occurrences in Brazil1
Tensor based statistical segmentation of green vegetation canopy images1
Comparative study for naval repairs using longitudinal slipway or airbags1
Classifying the physical activity indicator using machine learning and direct measurements: a feasibility study1
Breakthrough analysis of continuous fixed-bed dehydration of gas streams using 4A zeolite molecular sieve1
Proposal of two facial scales using emojis as tools to understand emotions in research with Brazilian consumers1
Effects of cooling type on mechanical properties of concrete produced with slag-modified cement exposed to high temperatures1
Elastoplastic analysis of reinforced concrete space frames using the uniaxial and biaxial bending method1
Health management and user protection: an analysis of gamification elements in applications for pregnant women1
Optimization of osmotic pretreatment of tomato slices using response surface methodology and further hot-air drying1
Pulsed electric field for Escherichia coli inactivation in pumpkin juice and nectar1
Low-cost multipurpose sensor network integrated with iot and webgis for fire safety concerns1
Extra and intracellular laccase titers of xylophagic bacteria isolated from adult termite1
The influence of urban and mineral expansion on surface temperature variation1
SFO for enhancing steganogrphy by exploiting exact resemblance between cover and secure text1
Detection of retinal diseases from ophthalmological images based on convolutional neural network architecture1
An MINLP model for the minimization of installation and operational costs in water distribution networks1
Maltodextrin- modified starch microparticles containing benzoic acid: Physical properties and thermal stability1
Study of the mechanical behavior of asphalt mixtures in terms of creep and Superpave compaction parameters1
Multimethod simulation approach for capacity design of a truck parking area in city ports1
Measurement of wood surface roughness in Dinizia excelsa Ducke using an atomic force microscope1
Characterization of pseudo-fruits of Hovenia dulcis T. at different maturation stages and drying methods1
Near infrared spectroscopy as a tool for agricultural expertise: identification of tomato seedlings1
Optimization and production kinetics for cellulases by wild and mutant strain of Thermomyces dupontii in stirred tank reactor1
App store mining for feature extraction: analyzing user reviews1
On On intuitionistic fuzzy hilbert ideal convergent sequence spaces1
Plant growth-promoting activity of wild-type and bromate-resistant mutant of the endophytic fungus Colletotrichum karstii1
Fuzzy logic is a powerful tool for the automation of milk classification1
Impacts caused by swine manure application and proper management proposition in a swine finishing farm1
Prediction of the innovative capacity of countries based on their cultural dimensions: an analysis of the global innovation index1
Kinetic-hydrodynamic models considering climatic influence on the domestic sewage treatment by constructed wetlands in tropical country1
Geotechnologies applied to geographic information system (GIS) of Fish farming in Rondônia state, Western Amazon0
Daylighting evaluation in deep plan office buildings with OPV windows through simulation on Radiance0
Internet of Things experimental platform for real-time water monitoring: a case study of the Araranguá River estuary0
Kinematic model of bar mechanism for ectrodactyly applications0
Lipid microcapsule synthesis from Melaleuca alternifolia (tea tree) hydrolate0
Evaluation of biogas production from residues of the dietary supplement industry0
Analysis of fat mass value, clinical and metabolic data and interleukin-6 in HIV-positive males using regression analyses and artificial neural network0
Synthesis and characterization of a new ruthenium (II) terpyridyl diphosphine complex0
Influence of mortar coating on the thermal analysis of steel profiles in a fire situation0
Predicting Blood Glucose Level in Malaysian Women Based on Glutathione and Anthropometric Parameters0
GUI-CAD Tool to assist the multiclass classification of mammary pathologies by infrared images0
New procedure to pre-select lactic acid bacteria able to control table-olive fermentation0
Evaluation of Weibull parameters by different methods for farms0
Designing a Temporin-1CEa Analog with Improved in Vitro Selectivity towards Prostate Cancerous Cell Line (LNCaP)0
Validation of mathematical models as a tool for prediction of α-amylase production by Coprinus comatus in a low-cost culture medium0
Carbon nanotubes added to Portland cement pastes containing nano-silica0
Effect of Land Use/Land Cover Maps on CN Method: Case Study over Kahramanmaras0
Influence of mean value of the modulus of elasticity in compression parallel to the grain on the design of timber trusses0
Discrimination of baru oil adulteration with soy oil using portable near infrared spectroscopy, Fourier-transform infrared spectroscopy and Partial Least-Squares Discriminant0
Normal-tangent-logarithm-(G_1,G_2 ): a class of probabilistic distributions depending on two baselines0
Annona muricata leaf extracts obtained with subcritical water and conventional methods: evaluation of antioxidant activities, total polyphenol and rutin contents0
Effect of tragacanth gum (Astragalus gummifer) and melaleuca essential oil to extend the shelf life of minimally processed pineapples0
Simulation of future climate scenarios and the impact on the water availability in southern Brazil0
Bayesian approach for a 2 x 2 crossover design with repeated measures: a simulation study0
Automatic Classification of COVID-19 using CT-Scan Images0
Comparison of different freezing techniques, extenders, and cryoprotectants on quality and fertility of cryopreserved Salmo trutta f. fario sperm0
Ecological soap production using green chemistry principles0
Characterization of SnO2-based gas sensors to analyze diesel and biodiesel blends0
Performance evaluation of urban drainage systems: an analytic hierarchy process approach for the Jaracati basin in Brazil0
Accumulation of ions in soil fertigated with dilutions of dairy effluents in the Brazilian semi-arid region0
Comparison between CFD simulation and affinity laws and analysis of the degree of reaction.0
Extending the Capacity of IoT Devices with Serverless Services for a Face Detection Application: A practical evaluation0
Nomograms for maximum pressure angles in radial cams with follower eccentricity for cycloidal and harmonic motion curves0
Mechanical analysis and materials selection of a scissor lift system for pig transportation0
Seismic behavior of large concrete panel prefabricated structures in relation to structural joints0
Using Response Surface Methodology to evaluate the effect of pequi flour, and pulp and by-product on sweet bread development0
Bone regeneration in critical size calvarial defects using synthetic hydroxyapatite and mineralized bovine tendon base materials: a micro-computed tomography analysis0
Feasibility of the expectation-maximization algorithm for assessing individuals with different sensory perceptions in discrimination of specialty coffees0
DNA Release from Polyaziridine Polyplexes Aided by Biomacromolecules: Effect of pH0
Interaction between attribute importance and user satisfaction on the promotion of public transport0
Biogas production and composition optimization in an anaerobic digestor using cheese whey and swine manure as substrate0
Change in injection angle as alternative for diesel engine fueled with biodiesel blends0
Optimization of fermentation conditions for sourdough by three different lactic acid bacteria using response surface methodology0
Numerical Integration of locally Peaked Bivariate Functions0
Grid-connected photovoltaic system to mitigate momentary voltage dip based on the balance between the active and reactive powers0
Intraspecific discrimination of fish populations by fluorescence spectroscopy0
Biomass cogeneration plants integrated into poultry slaughterhouses for reducing industry costs with energy0
Difference Gai Sequences of Interval numbers with respect to Orlicz Function0
Evaluation of representativeness of elasticity modulus and apparent density of D20 strength class of Brazilian standard in timber structures design0
Proposal of a method for routing school buses in a small-sized county0
Computational implementation of alternative method for determining the loss of prestressing by deformation of the anchorage in post-tensioning0
Preservation of frozen strawberries enriched with Saccharomyces boulardii using gelatin-based coating0
Soil suction effects on CPT data interpretation0
Pesticide residues detected in Colossoma macropomum by the modified QuEChERS and GC-MS/MS methods0
A modified mode shape data-based method for beams structural damage detection0
Mixture models of probability distributions applied to rainfall in the state of Pernambuco, Brazil0
Citizens’ perception analysis of public transport and smart technologies in the Brazilian capitals during the SARS-CoV-2 pandemic0
Stanford & Smith nonlinear model in the description of CO2 evolved from soil treated with swine manure: maximum entropy prior0
Development and characterization of wheat mill by-product films enriched with commercial rosemary extract0
Stress-strain analysis of the tow hook of a commercial truck by numerical simulations0
Agroindustrial co-products and waste cooking oil in the production of lipases by thermophilic Bacillus licheniformis SMIA-30
Goldenberry powder processing: analysis by a response surface methodology0
Rheological behavior of dehydrated cranberry suspensions: Analysis of the influence of temperature and solid concentration on Casson’s model parameters0
Evaluation of feeding molar rate in mini fixed bed reactor for methanol steam reforming with pre-optimized composition of CuO/ZnO/Al2O3 catalyst0
Criteria to assess the flow of cement-stabilised self-compacting earth0
Compressive strength assessment bricks manufactured with Phosphogypsum in different dosages0
A novel design on polymeric material recycling technology0
Metamodeling on uncertainty quantification in the behavior of the tire/road interaction of vehicles0
An assessment of the true Gini coefficient regarding the fulfilment of the basic criteria for inequality measures0
Investigation of students’ intent to use the online learning platform with usability dimensions0
Mixture Design of Experiments as Strategy for Portfolio Optimization0
Accuracy of goodness-of-fit criteria for nonlinear regression: a study via Monte Carlo simulation0
Physiological response of the protective enzymatic mechanism of Pontederia parviflora Alexander caused by chromium absorption stress0
Antioxidant capacity and evaluation of total phenolic content of optimized blueberry (Vaccinium corymbosum) wine0
Effect of the ionic radius on structural properties of orthochromites RCrO3 (R = La, Gd, Y)0
Huanglongbing vector insect counting (HLB) by GAMLSS0
Citric acid production by Brazilian garlic Aspergillus welwitschiae strains using orange residues0
The influence of feature grouping algorithm in outlier detection with categorical data0
Use of Ora-pro-nóbis (Pereskia aculeata Miller) mucilage as a wall material in microencapsulation by complex coacervation0
Use of remotely piloted aircraft systems in monitoring pest and diseases in agricultural crops: global literature review0
Meta-structure based on coupled resonators for low-frequency broadband sound absorption0
Briquettes produced from the mixture of agro-industrial residues composed of eucalyptus sawdust with turnip or corn cob cake0
Word association and check-all-that-apply accessing the difference between yogurt and fermented whey beverage0
Production of tacrolimus using coconut oil as an alternative to glucose0
The diabacare cloud: predicting diabetes using machine learning0
An integrated exploration of heat kernel invariant feature and manifolding technique for 3D object recognition system0
Accelerated swelling of wood for rapid dimensional stability0
Investigation of the use of hemp fibers in recycling spinning0
Physicochemical characteristics and bioactive compounds of three puçá (Mouriri pusa Gardner) varieties, an underexploited fruit from the Brazilian Cerrado0
Lifetime of forage grasses submitted to different water regimes using survival analysis0
Jaboticaba (Plinia jaboticaba (Vell.) Berg) peel flour as an anthocyanin-rich ingredient for the elaboration of sequilho biscuits: Effects on sensory and technological properties0
Convergence rate in structural equation models – analysis of estimation methods and implications in the number of observations0
Proposal of a spatial database for indoor navigation0
Standardization of processing parameters and color of gels aiming to replace citric pectin by mesocarp flour or pectin of passion fruit0
Use of biostimulants in millet as strategies for tolerance to salinity of irrigation water0
A novel moving window-based power spectrum features for single-channel EEG classification using machine learning0
Novel flaxseed mucilage-based probiotic film: Application to sheep Sicilian cheese preservation0
Synthesis, morphological characterization, and evaluation of nano zero-valent iron (nZVI) in the degradation of water contaminated with POPs0
Inactivation of Listeria monocytogenes in ready-to-consume liquid infant milk treated with Ohmic Heating0
Subjective evaluation of floor impact noise using the tapping machine and a non-standardized source0
Necropolitics and the Covid-19 pandemic: evictions and removals that mark the recurrent housing problem in Brazil0
Relationship between the rainfall index for Southern Brazil and the indexes of the Tropical Pacific and the Tropical Atlantic Oceans0
Effects of solvent extraction on phenolic concentration and antioxidant capacity of the Oedogonium sp. (Chlorophyta) using a simplex-centroid mixture design0
Medicinal plants in Sabah (North Borneo) exhibit anti-pancreatic lipase, anti-amylase, and antioxidant properties0
Defining cost standard and new algorithm for economic leakage level components in water loss management0
Premature ventricular contraction recognition using blind source separation and ensemble gaussian naive bayes weighted by analytic hierarchy process0
Critical review of the environmental management of a DNAPL contaminated site in Resende, Rio de Janeiro, Brazil0
Chemical composition of biodiesel produced in situ with Salvinia molesta DS Mitchell (Salviniaceae) by ethylic and methylic route0
The effect of mesh parameters on computational cost and results in simulation of milling in Inconel 7180
The impact of ‘seasonal urban event’ to the hosting city’s urban vitality: case study of Summer beach and Winter Wonderland in Nottingham, UK0
Evaluation of different hydration techniques on the viability of commercial dry brewing yeast0
Mix design of large-stone asphalt mixtures for heavy-traffic roads0
Rainfall intensity model with spatialization of intensity-duration-frequency curve parameters - A case study for the state of Maranhão, Brazil0
ARLE GPS: A computational tool to aid architects in spatial planning of house0
Antimicrobial activity and time kill curve study of newly synthesized dialkyl carboxylate cyclohexane derivative; A novel anti-Pseudomonas aeruginosa compound0
Lychee peel extract obtained by ultrasound-assisted extraction: bioactive compounds and functional properties0
Measuring the effectiveness of extrapolation techniques associated with the multigrid method applied to the Navier-Stokes equations0
Effective width of steel-concrete composite box girder bridges: a review and method comparison0
Use of the glyphosate herbicide: an integrated review0
Free vibration analysis employing strain gradient notation four-node plane elements and considering the effects of parasitic shear0
Combustion analysis of ternary mixtures of diesel oil, biodiesel, and refined soybean oil: a view of cylinder pressure0
Influence of Water Concentration on the Water/Vapor/ Oil Separation Process in a Vacuum Oil Filter: Modelling and Simulation0
Influence of connection stiffness on static-dynamic behavior of steel frames0
Evaluation of the use of a biofilter made with biodegradable material for biogas desulfurization0
Regression models for binary response applied to data on neonatal deaths in newborns0
A modeling strategy for the simulation of box sections with layered shell elements0
Exploring the characteristics of the cadets’ learning network under military education0
Evaluation of a constructed wetlands hybrid system with and without recirculation0
Simulation of robust adaptive regression multi-level models for quality analysis of special coffees in cold storage0
Canonical correlation analysis applied to regulated deficit irrigation in ‘Tommy Atkins’ mango trees0
A driver perspective-based investigation for lane line visibility of pavements on drivers’ lane utilization behaviors0
Physical-chemical characteristics and modeling of the dehydration curve for Viola x wittrockiana mass loss0
Development of a bulk cargo fruit sampler0
Reliability analysis using experimental statistical methods and AIS: application in continuous flow tubes of gaseous medium0
Effect of different types of sugar on guava jams’ physical, physicochemical, and sensory properties0
Energy efficiency of commercial offices by luminous retrofit0
Phosphorus concentrations in sediments from the equatorial Amazon estuary, Furo of Muriá, Pará State, Brazil0
Some relations between the sets of f-statistically convergent difference sequences0
Ultrasound-assisted extraction and characterization of the functional properties of starch from soursop fruits (Annona muricata L.)0
Characterization and selection of markers associated with resistance analogous genes as input for genetic analysis of Prosopis juliflora (Sw.) DC.0
Sulfated agaran with 4,6-pyruvated form from red seaweed Acanthophora muscoides attenuates thrombin formation: in vitro and ex vivo studies0
Solar Power and Demand Response for Greening Indian Lignite Power Plants: A CO2 Reduction Initiative0
Lifetime of forage cactus submitted to different water and saline levels0
0.077261209487915