Biofabrication

Article	Citations
From microtissues to organs: the future of reconstructive surgery with organ building block-based bioprinting	78
Enhanced gelatin methacryloyl nanohydroxyapatite hydrogel for high-fidelity 3D printing of bone tissue engineering scaffolds	75
3D bioprinted extracellular vesicles for tissue engineering—a perspective	70
Biochemical and immunomodulatory insights of extracellular matrix from decellularized human whole cervix: recellularization and in vivo ECM remodeling interplay	66
Melt electrowriting scaffolds for investigating Schwann cell-mediated modulation of vascular network formation	65
Conceptual design of growth-adaptive calcium phosphate cement implants for large paediatric cranial defects	60
Spheroid on-demand printing and drug screening of endothelialized hepatocellular carcinoma model at different stages	60
Microfluidic-based platforms for cell-to-cell communication studies	58
Cancer cell migration depends on adjacent ASC and adipose spheroids in a 3D bioprinted breast cancer model	56
Suspension bath bioprinting and maturation of anisotropic meniscal constructs	55
Bioprinting dynamic hydrazone hydrogels via light-mediated crosslinking	52
Development of immunocompetent full thickness skin tissue constructs to model skin fibrosis for high-throughput drug screening	52
3D bioprinted vascularized lung cancer organoid models with underlying disease capable of more precise drug evaluation	52
A microvascularized in vitro liver model for disease modeling and drug discovery	51
A biopsy-sized 3D skin model with a perifollicular vascular plexus enables studying immune cell trafficking in the skin	51
Cell-laden bioink circulation-assisted inkjet-based bioprinting to mitigate cell sedimentation and aggregation	49
In vitro vascularization of hydrogel-based tissue constructs via a combined approach of cell sheet engineering and dynamic perfusion cell culture	48
Influence of asymmetric microchannels in the structure and function of engineered neuronal circuits	47
Study of paraquat-induced pulmonary fibrosis using biomimetic micro-lung chips	47
Biofabricated nanomaterials in sustainable agriculture: insights, challenges and prospects	47
Acetylcholine-loaded nanoparticles protect against doxorubicin-induced toxicity in in vitro cardiac spheroids	43
Biofabrication of 3D breast cancer models for dissecting the cytotoxic response of human T cells expressing engineered MAIT cell receptors	43
High-throughput microgel biofabrication via air-assisted co-axial jetting for cell encapsulation, 3D bioprinting, and scaffolding applications	42
Formation of functionally robust human neocartilage from multiple donors using highly expanded costochondral cells	41
Self-driving bioprinting laboratories	41

3D bioprinted cell-laden GrooveNeuroTube: a multifunctional platform for ex vivo neural cell migration and growth studies	41
Principle-based multiphysics simulation for 3D bioprinting systems: modelling inkjet, extrusion, and DLP processes	41
Injectable rBMSCs-laden hydrogel microspheres loaded with naringin for osteomyelitis treatment	41
Optimizing release dynamics of bone-derived nanoparticles for enhanced in vivo fluorescence monitoring and bone regeneration in craniofacial repair	39
Bilayer silk fibroin/sodium alginate scaffold promotes vascularization and advances inflammation stage in full-thickness wound	39
Biofabrication of a tri-layered 3D-bioprinted CSC-based malignant melanoma model for personalized cancer treatment	39
The Batch-Resourcing Angiogenesis Tool (BRAT) to enable high-throughput microscopy screening of microvascular networks	37
A 3D-printed blood-brain barrier model with tunable topology and cell-matrix interactions	37
In vitro osteogenesis of hMSCs on collagen membranes embedded within LEGO®-inspired 3D printed PCL constructs for mandibular bone repair	36
Support-less ceramic 3D printing of bioceramic structures using a hydrogel bath	36
Recent trends in embedded 3D bioprinting of vascularized tissue constructs	36
Bioassembly of hemoglobin-loaded photopolymerizable spheroids alleviates hypoxia-induced cell death	36
Biohybrid tensegrity actuator driven by selective contractions of multiple skeletal muscle tissues	36
In vitro circulation model driven by tissue-engineered dome-shaped cardiac tissue	36
On-chip human lymph node stromal network for evaluating dendritic cell and T-cell trafficking	35
3D bioprinted in vitro epilepsy models for pharmacological evaluation in temporal lobe epilepsy	35
A hepatic zonation chip with an oxygen concentration gradient embracing the spatial distribution of metabolic function	34
Fabrication of 3D engineered intestinal tissue producing abundant mucus by air–liquid interface culture using paper-based dual-layer scaffold	34
Editorial: Special Issue on biofabrication of cartilage, bone and their interface	34
Endothelial extracellular vesicles enhance vascular self-assembly in engineered human cardiac tissues	34
Engineering an organoid culture system for enhanced murine and human hematopoietic stem and progenitor cell self-renewal and expansion	33
Fibrinogen-based cell and spheroid sheets manipulating and delivery for mouse hindlimb ischemia	33
Fabrication of a tailor-made conductive polyaniline/ascorbic acid-coated nanofibrous mat as a conductive and antioxidant cell-free cardiac patch	33
Biofabrication of microstructured bacterial ecosystems using chaotic bioprinting: advancing in vitro research for microbial engineering	32
Generating human skeletal myoblast spheroids for vascular myogenic tissue engineering	32
Pneumatic conveying inkjet bioprinting for the processing of living cells	31
Pillar electrodes embedded in the skeletal muscle tissue for selective stimulation of biohybrid actuators with increased contractile distance	31
Engineered tumor microspheres via microfluidics and decellularized extracellular matrix for high-throughput organoid-based drug screening	31
Uniform cerebral organoid culture on a pillar plate by simple and reproducible spheroid transfer from an ultralow attachment well plate	31
Printing GelMA bioinks: a strategy for building in vitro model to study nanoparticle-based minocycline release and cellular protection under oxidative stress	31
3D bioprinting approaches for spinal cord injury repair	30
The bioengineering of perfusable endocrine tissue with anastomosable blood vessels	30
Enhancement of properties of a cell-laden GelMA hydrogel-based bioink via calcium phosphate phase transition	30
Assessment and process optimization of high throughput biofabrication of immunocompetent breast cancer model for drug screening applications	30
Advances in biomaterials-based tissue engineering for regeneration of female reproductive tissues	30
Efficient one-step immobilization of DNA probes on 1DZnO nanoplatforms targeting a low-mutation region of SARS-CoV-2	30
Modular assembly of bioprinted perfusable blood vessel and tracheal epithelium for studying inflammatory respiratory diseases	29
Engineering anisotropic tissue analogues: harnessing synergistic potential of extrusion-based bioprinting and extracellular matrix-based bioink	29
Electrospun microfibers to enhance nutrient supply in bioinks and 3D-bioprinted tissue precursors	28
Efficient fabrication of 3D bioprinted functional sensory neurons using an inducible Neurogenin-2 human pluripotent stem cell line	28
Development of a bioreactor and volumetric bioprinting protocol to enable perfused culture of biofabricated human epithelial mammary ducts and endothelial constructs	28
Scale-out production of extracellular vesicles derived from natural killer cells via mechanical stimulation in a seesaw-motion bioreactor for cancer therapy	28
Integration of bioprinting advances and biomechanical strategies for in vitro lung modelling	27
Mimicking sarcolemmal damage in vitro: a contractile 3D model of skeletal muscle for drug testing in Duchenne muscular dystrophy	27
Recent trends in the development of in vitro 3D kidney models	27
Phototunable Hydrogel Mechanics for Spatial Guidance of Blood Capillary Morphogenesis	27
Computer-aided patterning of PCL microspheres to build modular scaffolds featuring improved strength and neovascularized tissue integration	27
Placing biofabrication into the context of human disease modeling	26
Fabrication of hierarchically porous trabecular bone replicas via 3D printing with high internal phase emulsions (HIPEs)	26
Biomimetic human skin model patterned with rete ridges	26

Co-axial printing of convoluted proximal tubule for kidney disease modeling	26
Constructing high-strength nano-micro fibrous woven scaffolds with native-like anisotropic structure and immunoregulatory function for tendon repair and regeneration	25
Constraint based Bayesian optimization of bioink precursor: a machine learning framework	25
Complex in vitro models positioned for impact to drug testing in pharma: a review	25
Cation-crosslinked κ-carrageenan sub-microgel medium for high-quality embedded bioprinting	25
Current advances in engineering meniscal tissues: insights into 3D printing, injectable hydrogels and physical stimulation based strategies	25
Development of ECM-inspired supramolecular cryogels with innate mineralization and compression-resistance for 3D culture of mini-bone trabeculae tissue analogs	25
Long-term in vitro maintenance of plasma cells in a hydrogel-enclosed human bone marrow microphysiological 3D model system	25
The interface stiffness and topographic feature dictate interfacial invasiveness of cancer spheroids	24
Targeted micro-heterogeneity in bioinks allows for 3D printing of complex constructs with improved resolution and cell viability	24
A novel solution for real-time in-situ cell distribution monitoring in 3D bioprinting via fluorescence imaging	24
Local extensional flows promote long-range fiber alignment in 3D collagen hydrogels	24
Modulation of iPSC-derived NCMSC cell state by TD-198946 enhances scaffold-free cartilage biofabrication	24
Design and bioprinting for tissue interfaces	23
Development of a high-throughput micropatterned agarose scaffold for consistent and reproducible hPSC-derived liver organoids	23
In vitro long term differentiation and functionality of three-dimensional bioprinted primary human hepatocytes: application for in vivo	23
Current progress of in vitro vascular models on microfluidic chips	23
High resolution melt electro-written scaffolds promote alignment of human skeletal muscle cells	23
Core–shell microbead-based 3D vascularized glioma tumor model for effective drug testing	23
Additive manufacturing and performance of bioceramic scaffolds with different hollow strut geometries	23
Biofabrication of biomimetic undulating microtopography at the dermal-epidermal junction and its effects on the growth and differentiation of epidermal cells	22
Rational design of 3D-printed scaffolds for breast tissue engineering using structural analysis	22
An open-source bioink database for microextrusion 3D printing	22
Self-assembled innervated vasculature-on-a-chip to study nociception	22
Droplet microfluidic fabrication of stiffness-tunable alginate-Matrigel microspheres with innovative external gelation for high-throughput tumor organoid assays	22
3D hydrogel microfibers promote the differentiation of encapsulated neural stem cells and facilitate neuron protection and axon regrowth after complete transactional spinal cord injury	22
An automated pipeline for tracking and measuring cell spheroids encapsulated in 3D hydrogel systems	21
3D printed bioactive coated scaffolds boost osteogenesis and angiogenesis via the regulation of scaffold microstructure	21
Novel in situ and rapid self-gelation recombinant collagen-like protein hydrogel for wound regeneration: mediated by metal coordination crosslinking and reinforced by electro-oxidized tea polyphenols	21
Microfluidic bioprinting as a tool to produce hiPSCs-derived renal organoids	21
3D engineering of diseased blood vessels for integrative in vitro–in silico mechanobiology study	21
Advancing extrusion-based embedded 3D bioprinting via scientific, engineering, and process innovations	20
Additive manufacturing of silicon nitride fiber-reinforced polyetheretherketone composites with enhanced mechanical strength and multifunctional bioactivity for load-bearing bone defect repair	20
Orchestrating the Parkinson’s disease microenvironment in 3D for pathogenesis study and therapeutic development	20
Functional imaging of 3D bioprinted microalgal constructs and simulation of their photosynthetic performance	20
Simulating big mechanically-active culture systems (BigMACS) using paired biomechanics-histology FEA modelling to derive mechanobiology design relationships	20
Versatile xanthan gum-based support bath material compatible with multiple crosslinking mechanisms: rheological properties, printability, and cytocompatibility study	20
Stress-free cell aggregation by using the CEPT cocktail enhances embryoid body and organoid fitness	19
The degradation behavior of 3D-printed polyurethane composite scaffolds regulates bone regeneration	19
3D bioprinted epicardial patch of GelMA containing VEGF-loaded chitosan nanoparticles and human bone marrow mesenchymal stem cells for the treatment of myocardial infarction	19
Non-destructive luminescence and PET imaging to monitor tissue microenvironment in microphysiological systems during brain metastasis using dissociated cerebral organoids	19
In vitro bioprinted 3D model enhancing osteoblast-to-osteocyte differentiation	19
Scaffold-free tenogenic macro-tissues engineered by multi-layered bioassembly of rat tendon fibroblast spheroids	19
Efficient wet-spinning of pre-aligned microtissues for 3D bioprinting complex tissue alignment	18
Using a micro-device with a deformable ceiling to probe stiffness heterogeneities within 3D cell aggregates	18
Development of a plasma-based 3D printing system for enhancing the biocompatibility of 3D scaffold	18
Ionically annealed zwitterionic microgels for bioprinting of cartilaginous constructs	18
Antibacterial, ROS scavenging and angiogenesis promoting ϵ-Polylysine/gelatin based hydrogel containing CTLP to regulate macrophages for pressure ulcer healing	18
An immunocompetent human kidney on-a-chip model to study renal inflammation and immune-mediated injury	18
High-throughput bioprinting of the nasal epithelium using patient-derived nasal epithelial cells	18
Biofabrication & cryopreservation of tissue engineered constructs for on-demand applications	18
Fused deposition modeling of defect-specific conformable bone grafts from 13-93B3 polymer-bio-glass composites	18
Comparison study on hyaline cartilage versus fibrocartilage formation in a pig model by using 3D-bioprinted hydrogel and hybrid constructs	18
Construction of highly vascularized hepatic spheroids of primary hepatocytes via pro-angiogenic strategy in vitro	18
Recent progress of organ-on-a-chip towards cardiovascular diseases: advanced design, fabrication, and applications	17
3D bioprinting in tissue engineering: current state-of-the-art and challenges towards system standardization and clinical translation	17
High-precision path planning for multi-material 3D bioprinting of complex structures	17
3D melt electrowritten MXene-reinforced scaffolds for tissue engineering applications	17
In vitro three-dimensional volumetric printing of vitreous body models using decellularized extracellular matrix bioink	17
Incorporating biomechanics as a key evaluation metric for organoids	17
Regolith-supported biofabrication: 3D bioprinting of living, photosynthetically active structures using Lunar and Martian regolith simulants	17
Digital light processing-bioprinted poly-NAGA-GelMA-based hydrogel lenticule for precise refractive errors correction	17
Surface slicing and toolpath planning for in-situ bioprinting of skin implants	17
Fixation method of a single muscle fiber by magnetic force for stretching, transportation, and evaluation of mechanical properties	17
Bioprinting of pre-vascularized constructs for enhanced in vivo neo-vascularization	17
Highly compliant biomimetic scaffolds for small diameter tissue-engineered vascular grafts (TEVGs) produced via melt electrowriting (MEW)	17
Calcium supplementation of bioinks reduces shear stress-induced cell damage during bioprinting	17
Bio-3D printing with smooth muscle cells derived from human iPSCs via neural crest and its application for the tracheal regeneration	16
miRNA induced 3D bioprinted-heterotypic osteochondral interface	16
Comparison of in-situ versus ex-situ delivery of polyethylenimine-BMP-2 polyplexes for rat calvarial defect repair via intraoperative bioprinting	16
Pharmacy 3D printing	16
A cell bank paradigm for preclinical evaluation of an analogous cellular product for an allogeneic cell therapy	16
Tailoring agarose fluid gels for use in suspension bath bioprinting and culture of spheroid-based bioinks	16
Engineering strategies for the construction of oriented and functional skeletal muscle tissues	16
Construction of a three-dimensional urothelium on-chip with barrier function based on urinary flow microenvironment	16
Vascular dysfunction in hemorrhagic viral fevers: opportunities for organotypic modeling	16
Ultrasound standing wave spatial patterning of human umbilical vein endothelial cells for 3D micro-vascular networks formation	16
Closed-loop vasculature network design for bioprinting large, solid tissue scaffolds	16
Patient-derived osteosarcoma tumoroid model reveals functional phenotypic diversity with implications for drug responses	16
A microphysiological model of bone development and regeneration	16

Exploring bio-nanomaterials as antibiotic allies to combat antimicrobial resistance	16
Co-axial hydrogel spinning for facile biofabrication of prostate cancer-like 3D models	16
Interstitial fluid flow contributes to prostate cancer invasion and migration to bone; study conducted using a novel horizontal flow bioreactor	16
Microfluidic-based preparation of artificial antigen-presenting gel droplets for integrated and minimalistic adoptive cell therapy strategies	15
Ultrasound-optimized decellularization and functional modification for enhanced vascular grafts	15
Fabricating vascularized, anatomically accurate bone grafts using 3D bioprinted sectional bone modules, in-situ angiogenesis, BMP-2 controlled release, and bioassembly	15
Advances in bone organoids research and future perspectives	15
Cellnet technology to generate 3D, functional, single-cell networks in custom architectures within collagen	15
Controlled fabrication of functional liver spheroids with microfluidic flow cytometric printing	15
Advancing regenerative medicine: the Aceman system’s pioneering automation and machine learning in mesenchymal stem cell biofabrication	15
Effect of viscosity of gelatin methacryloyl-based bioinks on bone cells	15
Development and characterization of biological sutures made of cell-assembled extracellular matrix	15
3D bioprinting of dense cellular structures within hydrogels with spatially controlled heterogeneity	14
3D modeling of normal skin and cutaneous squamous cell carcinoma. A comparative study in 2D cultures, spheroids, and 3D bioprinted systems	14
Nanoliposome functionalized colloidal GelMA inks for 3D printing of scaffolds with multiscale porosity	14
Reconstruction of tumor microenvironment via in vitro three-dimensional models	14
Dynamic 3D in vitro platform engineered via low-cytotoxic DLP 3D printing for enhanced ovarian follicle culture	14
Xeno-free bioengineered human skeletal muscle tissue using human platelet lysate-based hydrogels	14
Flexible 3D printed microwires and 3D microelectrodes for heart-on-a-chip engineering	14
Microfabrication and lab-on-a-chip devices promote in vitro modeling of neural interfaces for neuroscience researches and preclinical applications	14
3D-printed biomimetic scaffolds with precisely controlled and tunable structures guide cell migration and promote regeneration of osteochondral defect	14
AI-augmented ultrasound analysis of noninvasive quantification of hydrogels concentration for bioprinting	14
Calcium phosphate complex of recombinant human thrombomodulin promote bone formation in interbody fusion	14
Shaping soft hydrogels into 3D, multiscale, perfusable models using multimodal printing	14
Corrigendum: Toward a neurospheroid niche model: optimizing embedded 3D bioprinting for fabrication of neurospheroid brain-like co-culture constructs (2021 Biofabrication	14
Progress in the application of organoids for exploring the relationship between macrophages and various lung diseases	13
Organoid bioinks: construction and application	13
A hollow fiber membrane-based liver organoid-on-a-chip model for examining drug metabolism and transport	13
Bioprinted M2 macrophage-derived extracellular vesicle mimics attenuate foreign body reaction and enhance vascularized tissue regeneration	13
Translational biomaterials of four-dimensional bioprinting for tissue regeneration	13
Radial constraint of plastically compressed human dermo-epidermal skin substitutes mitigates in vitro contraction and enhances structural maturity	13
A mechanically active nucleus pulposus-on-a-chip for studying mechanobiology and therapeutic strategies in intervertebral disc disease	13
Physically-based simulation of elastic-plastic fusion of 3D bioprinted spheroids	13
Fabrication and characterization of a multilayered membrane for biliary stents enabling directional delivery of UDCA and aspirin	13
A capsule-based scaffold incorporating decellularized extracellular matrix and curcumin for islet beta cell therapy in type 1 diabetes mellitus	13
3D vascularized microphysiological system for investigation of tumor-endothelial crosstalk in anti-cancer drug resistance	13
Long-term mechanical loading is required for the formation of 3D bioprinted functional osteocyte bone organoids	13
Heart-on-a-chip using human iPSC-derived cardiomyocytes with an integrated vascular endothelial layer based on a culture patch as a potential platform for drug evaluation	13
Directing ligament-mimetic bi-directional cell organization in scaffolds through zone-specific microarchitecture for ligament tissue engineering	13
Microneedle system for tissue engineering and regenerative medicines: a smart and efficient therapeutic approach	13
Implantable ocular therapeutic systems: an insight into their clinical potential in the long-term treatment of ocular diseases	13
High-yield extracellular vesicle production from HEK293T cells encapsulated in 3D auxetic scaffolds with cyclic mechanical stimulation for effective drug carrier systems	13
Lung dECM matrikine-based hydrogel reverses bleomycin-induced pulmonary fibrosis by suppressing M2 macrophage polarization	13
AI-powered printability evaluation framework for 3D bioprinting using Hausdorff distance metrics	13
Early-stage material properties as predictors of neural bioink performance during extrusion 3D bioprinting	13
Wet 3D printing of biodegradable porous scaffolds to enable room-temperature deposition modeling of polymeric solutions for regeneration of articular cartilage	13
Silver nitrate-assisted photo-crosslinking for enhancing the mechanical properties of an alginate/silk fibroin-based 3D scaffold	13
Renal proximal tubule-on-a-chip in PDMS: fabrication, functionalization, and RPTEC:HUVEC co-culture evaluation	12
A glomerulus chip with spherically twisted cell-laden hollow fibers as glomerular capillary tufts	12
AC electrokinetic mixing-assisted controllable liposome synthesis using a mold-extraction fabricated microfluidic chip	12
A vascularized 3D model of the human pancreatic islet for ex vivo study of immune cell-islet interaction	12
A three-dimensional human adipocyte model of fatty acid-induced obesity	12
A scalable human iPSC-based neuromuscular disease model on suspended biobased elastomer nanofiber scaffolds	12
Engineering pre-vascularized 3D tissue and rapid vascular integration with host blood vessels via co-cultured spheroids-laden hydrogel	12
Engineering a microfluidic-assisted 3D bioprinting approach for the hierarchical control deposition and compartmentalisation of graded bioinks	12
Bone on-a-chip: a 3D dendritic network in a screening platform for osteocyte-targeted drugs	12
Embedded 3D printing of dilute particle suspensions into dense complex tissue fibers using shear thinning xanthan baths	12
Hybrid 3D bioprinting for advanced tissue-engineered trachea: merging fused deposition modeling (FDM) and top–down digital light processing (DLP)	12
Therapeutic potential of TAS-115 in 3D breast cancer models	12
Intervertebral disc spheroids as an in vitro multicellular platform for recapitulating the microenvironment of intervertebral disc degeneration	12
A perfusable, vascularized kidney organoid-on-chip model	12
Biofabrication of 3D bioprinted and organ-on-chip blood–brain barrier models using hCMEC/D3 for intranasal delivery of central nervous system therapeutics	12
Biomimetic gradient scaffolds for the tissue engineering and regeneration of rotator cuff enthesis	12
Physicochemically guided modular assembly of a multi-appendage skin model via 3D bioprinting	12
Steering cell orientation through light-based spatiotemporal modulation of the mechanical environment	12
3D bioprinting platform development for high-throughput cancer organoid models construction and drug evaluation	12
Analysis of bioprinting strategies for skin diseases and injuries through structural and temporal dynamics: historical perspectives, research hotspots, and emerging trends	12
Microphysiological systems to study colorectal cancer: state-of-the-art	12
Organoid models: the future companions of personalized drug development	12
Bioprinting a resilient and transparent cornea stroma equivalent: harnessing dual crosslinking strategy with decellularized cornea matrix and silk fibroin hybrid	12
A long-term storable gel-laden chip composite built in a multi-well plate enabling in situ cell encapsulation for high-throughput liver model	12
Sacrificial scaffold-assisted direct ink writing of engineered aortic valve prostheses	12
RCAN1.4 regulates tumor cell engraftment and invasion in a thyroid cancer to lung metastasis-on-a-chip microphysiological system	12
One-stop assembly of adherent 3D retinal organoids from hiPSCs based on 3D-printed derived PDMS microwell platform	12
Construction of a 3D bioprinted skin model for psoriasis research and drug evaluation	11
Purified adipose tissue-derived extracellular vesicles facilitate adipose organoid vascularization through coordinating adipogenesis and angiogenesis	11
Collagen silver-doped hydroxyapatite scaffolds reinforced with 3D printed frameworks for infection prevention and enhanced repair of load-bearing bone defects	11
SARS-CoV-2 infection of 3D in vitro cardiac spheroids models the activation of antiviral, inflammatory, fibrotic, and contractile responses in a dose-dep	11
Scaffold-free assembly of cortical–hippocampal circuit from modular neurospheroids: a high-throughput platform to investigate network development and dynamics	11
Three-dimensional bioprinted BMSCs-laden highly adhesive artificial periosteum containing gelatin-dopamine and graphene oxide nanosheets promoting bone defect repair	11
Vascular smooth muscle cells can be circumferentially aligned inside a channel using tunable gelatin microribbons	11
Engineering breast cancer tumor microenvironment: advanced fabrication for 3D in vitro models	11
Highly conductive, stretchable, and biocompatible graphene oxide biocomposite hydrogel for advanced tissue engineering	11
Core–shell bioprinting of vascularized in vitro liver sinusoid models	11
Scaffold-based tissue engineering strategies for urethral repair and reconstruction	10
Bioprinting of light-crosslinkable neutral-dissolved collagen to build implantable connective tissue with programmable cellular orientation	10
3D bioprinting of mouse pre-osteoblasts and human MSCs using bioinks consisting of gelatin and decellularized bone particles	10
Chlorella-enriched hydrogels protect against myocardial damage and reactive oxygen species production in an in vitro ischemia/reperfusion model using cardiac spheroids	10
A microscale 3D organ on a chip for recapitulating reciprocal neuroendocrine crosstalk between the hypothalamus and the pituitary gland	10
Programmable morphogenesis: integrating biophysical and genetic engineering tools to direct tissue formation	10
A photosynthetic egg based oxygen-releasing platform to promote angiogenesis and tissue regeneration in diabetic wounds	10
A novel GelMA-SPAK hydrogel with affinity-controlled release of bFGF towards wound healing	10
Biofabrication and simulation techniques for gut-on-a-chip	10
Fabrication of gradient hydrogels using a thermophoretic approach in microfluidics	10
A physiologically relevant in vitro 3-D melanoma skin model for targeted therapy assessment	10