Proceedings of the Institution of Mechanical Engineers Part O-Journal

Papers
(The median citation count of Proceedings of the Institution of Mechanical Engineers Part O-Journal is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Optimizing inspection plan for corroded pipeline with considering imperfect maintenance20
Guest Editorial: SMRLO-2019 Special Issue18
A practical method for reliability evaluation of hybrid system under unit life submitted with different distribution16
Parameter estimation of lifetime distribution for the meta-action unit with uncertainty failure modes under type-I censored data15
Is eliciting dependency worth the effort? A study for the multivariate Poisson-Gamma probability model14
Remaining useful life estimation based on the joint use of an observer and a hidden Markov model11
A hybrid maintenance policy with fixed periodic structure and opportunistic replacement10
An integrated lifetime prediction method for double-nut ball screws subject to preload loss failure mode9
Efficient reliability computation of consecutive-k-out-of-n: F systems with shared components9
Measuring in-service traction elevator reliability based on orthogonal defect classification and Markov analysis9
A combined approach of convolutional neural networks and machine learning for visual fault classification in photovoltaic modules9
Generalized mixed shock model for multi-component systems in the shock environment with a change point8
Simulation-based dynamic probabilistic risk assessment of an internal flooding-initiated accident in nuclear power plant using THALES2 and RAPID8
A bathtub pattern for repairable systems: From better-than-minimal to minimal and worse-than-minimal repairs7
Dynamic and adaptive grouping maintenance strategies: New scalable optimization algorithms7
Research on reliability analysis strategy of high-speed train ATP on-board equipment under uncertain information6
Petri nets-based method for operational risk analysis in supply chains based on timeliness and recovery time6
MDRM model and its application in hybrid reliability analysis6
Modelling software reliability growth through generalized inflection S-shaped fault reduction factor and optimal release time6
On the effectiveness of standards application to threshold setting in vibration condition monitoring in industrial machinery5
Reliability assessment for bolt joint system with multiple dependent competing failure processes5
Reliability analysis of the anti-sliding of a retaining wall subjected to seismic loads5
Publication note for ESREL 2016 special issue5
Maintenance cost assessment for heterogeneous multi-component systems incorporating perfect inspections and waiting time to maintenance5
Reliability evaluation of consecutive k-out-of-m: F balanced systems with a symmetry line5
The need for and conceptual design of an AI model-based Integrated Flight Advisory System5
A seafarers’ cognitive error mining model based on IDA and TRACEr and mitigation measures for ship collision accidents5
A study on the small failure probabilities of cylindrical composite hydrogen storage tanks using subset simulation5
Reliability model for key components of urban rail transit train based on improved hunter-prey optimization5
Planning maintenance tasks in airline operating companies: A mathematical programming model applied to a case study5
Risk-informed control systems for improved operational performance and decision-making5
Reliability assessment of degradation processes with random shocks considering recoverable shock damages4
HSMM multi-observations for prognostics and health management4
Modeling safety barriers and risk analysis in cement firing systems: A BORA-based approach incorporating risk influencing factors4
Optimal burn-in for minimally repaired components from n subpopulations4
A novel methodology based on long short-term memory stacked autoencoders for unsupervised detection of abnormal working conditions in semiconductor manufacturing systems4
Using formal methods for autonomous systems: Five recipes for formal verification4
Reliability analysis of complex multistate systems based on an evidence-based discrete-time Bayesian network4
Optimal defense resource allocation against cyber-attacks in distributed generation systems4
Mission reliability evaluation and selective maintenance approach for manufacturing systems considering epistemic uncertainty4
Risk-based maintenance optimization of aircraft gas turbine engine component4
Remaining useful life prediction of implicit linear Wiener degradation process based on multi-source information4
Unsupervised incremental transfer learning with knowledge distillation for online remaining useful life prediction of rotating machinery4
Reliability modeling for multi-state systems with a protective device considering multiple triggering mechanism4
Is the definition of risk still contested?4
Optimal block replacement based on expert judgement method4
Inventory optimization of spare parts for k -out-of- n pairs: G balanced systems4
Reliability-based robust optimization design of vehicle braking systems under multiple failure modes based on high-precision surrogate models4
Estimation in a multicomponent stress-strength model for progressive censored lognormal distribution4
Collaborative data-driven reliability analysis of multi-state fault trees4
Performance reliability analysis of multi-state degraded system with improved Lz transform3
Reliability analysis and selective maintenance for multistate queueing system3
BEPU robustness analysis via perturbed law-based sensitivity indices3
Computing reliability indices of a wind power system via Markov chain modelling of wind speed3
Assess reliability of a tourism transport network considering limited-budget and late arrivals3
Vulnerability assessment of critical infrastructures for cascading failures: An application to water distribution networks3
Optimizations of discrete garbage collections in computer reliability systems3
Reliability analysis of city gas pipelines subjected to surface loads based on the Kriging model3
First hitting time distribution and cost assessment in a two-unit system with dependent degradation processes subject to imperfect maintenance3
A comparison between computer vision- and deep learning-based models for automated concrete crack detection3
An intelligent fault diagnosis framework based on piecewise aggregate approximation, statistical moments, and sparse autoencoder3
Joint optimization of multi-type component procurement and assignment problems with budget constraint3
Determination of optimal post-warranty variable maintenance period for repairable second-hand product based on mean residual life3
Integrated planning framework for preventive maintenance grouping: A case study for a conveyor system in the Chilean mining industry3
RAM analysis of dynamic positioning system: An approach taking into account uncertainties and criticality equipment ratings3
Optimization of a preventive maintenance strategy for a product with limited repair times3
Influence of different railway lines on wheel damage of high-speed trains: Data-driven modelling and prediction3
Guest Editorial: Special Issue of ESREL2020 PSAM153
Mission abort strategy for generalized k-out-of-n: F systems considering competing failure criteria3
Reliability analysis of bathtub-shaped distribution using empirical Bayesian and E-Bayesian estimations under progressive Type-II censoring3
Reliability of one-shot device with generalized gamma lifetime under cyclic accelerated life-test3
A study of the different relations between disruptive events and human factors and their effects on maintenance performance3
Optimal allocation of reliability improvement target under dependent component failures3
Path reachability including distance-constrained detours3
Novel assessment and prediction method for vessel traffic risk degree3
Inference on the stress-strength reliability of multi-component systems based on progressive first failure censored samples3
The social structure of 70 years of literature on Human Reliability3
Imperfect condition-based maintenance for a gamma degradation process in presence of unknown parameters3
Spare parts provisioning strategy of warranty repair demands for capital-intensive products3
Dynamic and gradual coupled reliability analysis of the transmission system of a shearer cutting arm2
Condition-based maintenance in hydroelectric plants: A systematic literature review2
Imperfect debugging-based modelling of fault detection incorporating change point for software reliability analysis2
An efficient discretization scheme for a dynamic Bayesian network in structural reliability analysis2
Development of a leading simulator/trailing simulator methodology as part of an integrated safety-security analysis for nuclear power plants2
Towards the formal performance analysis of multistate coherent systems using HOL theorem proving2
Risk analysis of accident-causing evolution in chemical laboratory based on complex network2
An integrated life-cycle maintenance modeling and simulation framework for aero engine fleet management decision support2
Bi-objective flexible job shop scheduling on machines considering condition-based maintenance activities2
Multi-feature learning-based extreme learning machine for rolling bearing fault diagnosis2
Estimation for Kies distribution with generalized progressive hybrid censoring under partially observed competing risks model2
A Bayesian agent-based model and software for wildfire safe evacuation planning and management2
A composite learning approach for multiple fault diagnosis in gears2
Reliability aspects in a dynamic time-to-failure degradation-based model2
Operational reliability and quality loss of diversely configurated manufacturing cells with heterogeneous feedstocks2
Sample allocation method for maintainability test based on extended FMECA information2
Reliability analysis for systems subject to mutually dependent degradation and shock processes2
Toward a hybrid causal framework for autonomous vehicle safety analysis2
Dynamic reliability measures of weighted k-out-of-n system with heterogeneous components and its application to solar power generating system2
Continual learning for fault diagnosis considering variable working conditions2
Reliability analysis of k-out-of-n: G repairable systems considering common cause failure and multi-level maintenance strategy2
A framework based on Natural Language Processing and Machine Learning for the classification of the severity of road accidents from reports2
Analyze periodic inspection and replacement policy of a shock and wear model with phase-type inter-shock arrival times using roots method2
State-of-the-art multivariate lifetime assessment methodology for offshore renewable energy systems, utilizing novel deconvolution extrapolation scheme2
RUL management by production reference loopback2
Risk assessment of collisions of an autonomous passenger ferry2
Reliability study on crack propagation life of aluminum alloy repair structure2
Key components identification of EMU complex system faults with interval intuitionistic fuzzy set and multi-attribute group decision-making based on FMECA method2
Automatic simulation-based testing of autonomous ships using Gaussian processes and temporal logic2
On the causation correlation of maritime accidents based on data mining techniques2
Analysis of coal mining accident risk factors based on text mining2
Gear fault diagnosis based on bidimensional time-frequency information theoretic features and error-correcting output codes: A multi-class support vector machine2
Optimal post-warranty replacement policy based on number of product failures for the second-hand product2
Estimating collapse risk and reliability of concrete moment frame structure using response surface method and hybrid of artificial neural network with particle swarm optimization algorithm2
Joint optimization of maintenance and spare ordering policy for a competing failure system considering product quality2
Advanced Maintenance Modelling for Industrial Systems1
Subset simulation for optimal sensors positioning based on value of information1
Root cause identification approach using decomposition of QFD and extended RPN for product manufacturing reliability degradation1
Prioritisation of operations during emergency shutdown of a crude distillation unit by interval-valued intuitionistic fuzzy analytic hierarchy process1
Joint production, transportation, and maintenance in downstream fuel supply chain1
Using expert judgement techniques to assess reliability for long service-life components: An application to railway wheelsets1
Performance-based contracting in the airline industry from the standpoint of risk-averse maintenance providers1
Post-prognostics decision-making strategy for load allocation on a stochastically deteriorating multi-stack fuel cell system1
Bayesian inference-based prognosis of fatigue damage for MPPO polymer using Zhurkov fatigue life model1
Multiple stresses optimization design of constant-stress accelerated degradation test based on Wiener process1
The assessment and selection of suppliers using AHP and MABAC with type-2 fuzzy numbers in automotive industry1
A new risk assessment method based on belief rule base and fault tree analysis1
A new method for safety assessment of complex avionic systems1
A novel index for shearer system resilience in underground coal mines based on the operational environment1
A novel approach based on fault tree analysis and Bayesian network for multi-state reliability analysis of complex equipment systems1
Prognostic considering missing data: An input output hidden Markov model based solution1
Early pitting fault detection for polymer gears using kurtosis-VMD based condition indicators1
A new adaptive analysis method based on the Kriging model for structural reliability analysis1
A novel fault detection and diagnostic Petri net methodology for dynamic systems1
A sequential two-stage approach based on variational Bayesian inference for reliability-redundancy allocation1
Reliability of the two-unit priority standby system revisited1
Availability analysis and maintenance optimization for multiple failure mode systems considering imperfect repair1
Reliability assessment of phased mission systems with ternary components1
On preventive maintenance of k-out-of-n systems subject to fatal shocks1
Reliability assessment of PEEK/17-4PH stainless steel tribopair under seawater lubrication1
A test-based methodology for the probabilistic assessment of system resilience under random disturbances1
An algorithmic reliability evaluation approach for a multi-state k-out-of-n:G system with nonidentical and large number of components1
Observed and unobserved heterogeneity in failure data analysis1
Industry 5.0: Do risk assessment and risk management need to update? And if yes, how?1
Machine cross-domain remaining useful life prediction via contrastive adversarial variational recurrent method1
A fault diagnostic system based on Petri nets and gray relational analysis for train–ground wireless communication systems1
On the reliability and the optimal replacement policy of a k-out-of-n system in a discrete shock model1
Reliability optimization in series-parallel and parallel-series systems subject to random shocks1
On the use of leading safety indicators in maritime and their feasibility for Maritime Autonomous Surface Ships1
Active domain adaptation method for label expansion problem1
Multi-level risk classification of distributed embedded software failures for autonomous systems1
A load spectra design method for multi-stress accelerated testing1
Reliability analysis of complex networks based on irredundant subset cut group1
Computer simulation of the reliability of the heat exchange surface of the steam turbine condenser1
Fault diagnosis method of peak-load-regulation steam turbine based on improved PCA-HKNN artificial neural network1
Exploiting structural similarity in network reliability analysis using graph learning1
Operational reliability analysis of remote operated vehicle based on dynamic Bayesian network synthesis method1
Reliability evaluation of phased-mission systems exposed to random shocks1
Software reliability and cost models with warranty and life cycle1
Joint optimization of maintenance and spares inventory policies for a series system with multiple voting subsystems supported by protective devices1
Variational Bayesian inference-based polynomial chaos expansion: Application to time-variantreliability analysis1
Condition-based maintenance optimization for deteriorating systems considering performance-based contracting and destructive inspections1
Bearing remaining useful life prediction with an improved CNN-LSTM network using an artificial gorilla troop optimization algorithm1
A new warranty policy for heterogeneous items subject to monotone degradation processes1
A two-stage Gaussian process regression model for remaining useful prediction of bearings1
Continuum fault trees1
Stability and performance analysis of wireless powered communication networks1
A framework for modeling fault propagation paths in air turbine starter based on Bayesian network1
An active learning Kriging-based method combining the weight information entropy function and the adaptive candidate sample pool1
A Markov chain-based genetic algorithm for solving a redundancy allocation problem for a system with repairable warm standby components1
Ant colony optimisation of a community pharmacy dispensing process using Coloured Petri-Net simulation and UK pharmacy in-field data1
Optimal multi-kernel local fisher discriminant analysis for feature dimensionality reduction and fault diagnosis1
An efficient variance-based global sensitivity analysis method based on multiplicative dimensional reduction method and Taylor series expansion1
Maintenance analysis of a partial observable K-out-of-N system with load sharing units1
0.38701391220093