Journal of Geophysics and Engineering

Papers
(The median citation count of Journal of Geophysics and Engineering is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-03-01 to 2024-03-01.)
ArticleCitations
Deep carbonate reservoir characterisation using multi-seismic attributes via machine learning with physical constraints22
Geochemical characteristics and depositional environment of the Shahejie Formation in the Binnan Oilfield, China18
Least-squares reverse-time migration with sparsity constraints18
The influence of advance speed on overburden movement characteristics in longwall coal mining: insight from theoretical analysis and physical simulation17
Microtremor HVSR analysis of heterogeneous shallow sedimentary structures at Pohang, South Korea15
Effective moduli of rocks predicted by the Kuster–Toksöz and Mori–Tanaka models14
Fault and horizon automatic interpretation by CNN: a case study of coalfield14
Reflection signals and wellbore scattering waves in acoustic logging while drilling13
Experimental investigation on the characteristics of transient electromagnetic radiation during the dynamic fracturing progress of gas-bearing coal13
Progressive failure mechanical behaviour and response characteristics of sandstone under stress-seepage coupling11
A method for well log data generation based on a spatio-temporal neural network11
The application of multi-grounded source transient electromagnetic method in the detections of coal seam goafs in Gansu Province, China10
An integrated approach for reservoir characterisation in deep-water Krishna-Godavari basin, India: a case study10
High-frequency wavefield extrapolation using the Fourier neural operator9
Brittle mineral prediction based on rock-physics modelling for tight oil reservoir rocks9
Efficient least-squares reverse time migration using local cross-correlation imaging condition9
A review of OBN processing: challenges and solutions8
Two-dimensional deep learning inversion of magnetotelluric sounding data8
Direct inversion for reservoir parameters from prestack seismic data8
Electromagnetic signal characteristics and energy response pattern of briquette hammer fracturing8
Combined multi-branch selective kernel hybrid-pooling skip connection residual network for seismic random noise attenuation7
Calculation of matrix permeability from velocity and attenuation of ultrasonic S-wave7
A high-order total-variation regularisation method for full-waveform inversion7
Data-driven method for an improved linearised AVO inversion7
Distribution characteristics of the advance abutment pressure in a deep stope7
Propagation characteristics of ultrasonic P-wave velocity in artificial jointed coal briquettes7
Regional local integrated rockburst monitoring and early warning for multi-seam mining7
On three-stage temperature dependence of elastic wave velocities for rocks7
High-efficiency and precision VSP wavefield separation method via DCT6
Phase arrival picking for bridging multi-source downhole microseismic data using deep transfer learning6
Seismic random noise attenuation based on adaptive nonlocal median filter6
A finite-element algorithm with a perfectly matched layer boundary condition for seismic modelling in a diffusive-viscous medium6
Fracture characteristics of basic roof and mechanism of strata behavior in a pillarless working face6
Joint migration inversion: features and challenges6
Automatic first-arrival picking method via intelligent Markov optimal decision processes6
Evaluating the effect of EPBM operational parameters on surface settlement in soft ground5
Anisotropic frequency-dependent characteristics of PP- and PS-waves in partially saturated double-porosity rocks5
A case study of floor failure characteristics under fully mechanised caving mining conditions in extra-thick coal seams5
High-temperature effect on the material constants and elastic moduli for solid rocks5
Long-term creep and microscopic deformation mechanisms of sandstone using rock rheology creep equipment and scanning through high-resolution 3D XRM5
Biot's equations-based reservoir parameter inversion using deep neural networks5
An improved ant-tracking workflow based on divided-frequency data for fracture detection5
3D finite-element modeling of effective elastic properties for fracture density and multiscale natural fractures5
Two-dimensional variational mode decomposition for seismic record denoising5
Identifying critical failure information of thermal damaged sandstone through acoustic emission signal5
Weak signal enhancement using adaptive local similarity and neighboring super-virtual trace for first arrival picking5
Geophysical investigations for stability and safety mitigation of regional crude-oil pipeline near abandoned coal mines5
Comparing different approaches of time-lapse seismic inversion5
Optimization of proppant parameters for CBM extraction using hydrofracturing by orthogonal experimental process5
Velocity gradients choice affecting seismic site response in deep alluvial basins: Application to the Venetian Plain (Northern Italy)5
Source modification for efficiency enhancement of marine controlled-source electromagnetic method5
Lithology prediction method of coal-bearing reservoir based on stochastic seismic inversion and Bayesian classification: a case study on Ordos Basin4
Application of seismic multiattribute machine learning to determine coal strata thickness4
Acoustic wave propagation with new spatial implicit and temporal high-order staggered-grid finite-difference schemes4
Using logging while drilling resistivity imaging data to quantitatively evaluate fracture aperture based on numerical simulation4
Precision analysis of forced-oscillationdevice: numerical modelling and experimental investigations4
A novel saturation calculation model of fractured-vuggy carbonate reservoir via multiscale pore networks: a case study from Sichuan Basin, China4
CG-DAE: a noise suppression method for two-dimensional transient electromagnetic data based on deep learning4
Prediction of sweet spots in tight sandstone reservoirs based on anisotropic frequency-dependent AVO inversion4
Robust K-means algorithm with weighted window for seismic facies analysis4
A towed-type shallow high-resolution seismic detection system for coastal tidal flats and its application in Eastern China4
A comparison of $A\! -\! \phi $ formulae for three-dimensional geo-electromagnetic induction problems4
A calculation methodology of fault relative displacement used to study the mechanical characteristic of fault slip4
Modified viscoelastic wavefield simulations in the time domain using the new fractional Laplacians4
An immersed boundary method with iterative symmetric interpolation for irregular surface topography in seismic wavefield modelling4
Inversion of horizontal in situ stress field based on wide-azimuth seismic data4
Zero-offset data estimation using CNN for applying 1D full waveform inversion4
Study on temporal and spatial evolution characteristics of overburden deformation and gas emission during the longwall working face initial mining phase4
Predicting the thickness of sand strata in a sand-shale interbed reservoir based on seismic facies analysis3
Trapezoid-grid finite difference frequency domain method for seismic wave simulation3
3D full-time anisotropic TEM modelling using a mixed BDF2/SAI method3
Retrieving reflection arrivals from passive seismic data using Radon correlation3
Application of electrical resistivity tomography (ERT) in uranium mining earth dam3
Poroelastic property analysis of seismic low-frequency shadows associated with gas reservoirs3
Excavation unloading response of cylindrical rock-like specimen with axial joints: laboratory experiment and numerical simulation3
High-resolution time–frequency analysis based on a synchroextracting adaptive S-transform and its application3
Rock physics model for shale gas reservoirs with nanopore adsorption3
Patched Green's function method applied to acoustic wave propagation in disordered media: an interdisciplinary approach3
Seismic shot-encoding schemes for waveform inversion3
An efficient symplectic stereo-modeling method for seismic inversion by using deep learning technique3
An edge-assisted smooth method for potential field data3
Frequency information extraction based on time-frequency ridges for characterizing thin sand bodies3
Evaluating strategies for estimation of local kinematic parameters in noisy land data: quality versus performance trade-offs3
Numerical investigation of particles flow pattern and pressure distribution of coal bunker3
Accelerating the 2+2+1 method for estimating local traveltime operators in nonlinear beamforming using GPU graphics cards3
Vibration and horizontal directivity analysis of transmitting transducer for acoustic logging while drilling3
TOC estimation of shale oil reservoir by combining nuclear magnetic resonance logging and nuclear physics logging3
Estimation of shallow subsurface S-wave velocity structure in urban area based on inversion of apparent dispersion curve3
3D general-measure inversion of crosswell EM data using a direct solver3
A study on the geometric effects of a concrete filling body in remaining roadways with fully mechanised caving3
Wave velocity in shale in the Wufeng-Longmaxi formation in Sichuan Basin3
The effects of tool eccentricity on individual P and S head waves in monopole acoustic LWD3
Joint PP-PS seismic prestack inversion of thin-bed reservoirs3
Impact of geomechanical heterogeneity on multiple hydraulic fracture propagation3
The mechanisms of S-wave attenuation in grainstones3
Pulse width research on half-sine excitation signal for bending vibrator3
Imaging with surface-related multiples to overcome large acquisition gaps3
A novel method to retain a waterproof coal pillar near water-conducting fault2
3D anisotropic TEM modeling with loop source using model reduction method2
Spectral-ratio tomography for seismic attenuation estimation2
A novel apparent resistivity for land-based controlled-source electromagnetic method2
Five-dimensional interpolation in the OVT domain for wide-azimuth seismic data2
Designing monitoring networks for local earthquakes2
Development and application of triangulation joint network based on an FEM program (RS2)2
3D adaptive internal multiples modeling based on globally optimised Fourier finite-difference method2
Using the multi-component induction logging data to evaluate the geometric parameters of the hydraulic fracture2
Robust prestack seismic facies analysis using shearlet transform-based deep learning2
Seismic inversion and fracture prediction in tilted transversely isotropic media2
Seismic prediction and evaluation techniques for hot dry rock exploration and development2
Stability mechanism and control technology of large inclined working face roof in large-scale caving area2
Extension of grouting-induced splitting fractures in materials similar to coal rocks containing prefabricated fractures2
A high-resolution dispersion imaging method of seismic surface waves based on chirplet transform2
Application of stable carbon and hydrogen isotope technology in the determination of gas sources from limestone layers at Shuangliu mine, China2
Characteristics of elastic wave dispersion and attenuation induced by microcracks in complex anisotropic media2
Seismic reflection waveform inversion based on Gauss–Newton optimization2
Modeling seismic waves in ocean with the presence of irregular seabed and rough sea surface2
AVA inversion for novel fluid indicator considering consolidation parameter2
A mass balance method for measuring condensed water content in gas reservoirs2
Site-specific seismic hazard levels at the economic zone of Duqm, Oman2
Analytical spontaneous imbibition model for confined nanofractures2
Augmented deep learning workflow for robust fault prediction over multiple tectonic regimes2
Improving the 3D facies model with the seismic-derived log volumes: a case study from the Asmari Formation in the Hendijan Field, southwest Iran2
Improved adaptive thin-layer inversion for semi-airborne transient electromagnetic method2
Application of resistivity sounding in Quaternary stratigraphic division in Yixing, Eastern China2
Application of the three-component transient electromagnetic method in gold exploration: a case study of the Heicigou gold deposit in east Kunlun2
The mechanical responses in monopole acoustic LWD and their relation with the output voltage waveform2
Challenges in seismic rock physics2
Suppressing the very low-frequency noise by B-spline gating of transient electromagnetic data2
Full-time domain matching pursuit and empirical mode decomposition based sparse fixed-point seismic inversion2
A robust method for dynamic image stitching on a fully mechanized mining face2
Unsupervised deep learning seismic data random noise attenuation with early stopping2
Seismic wavefield reconstruction inversion using a plane-wave encoding strategy2
Crosswell frequency-domain reverse time migration imaging with wavefield decomposition2
Pore structure and its effect on acoustic velocity and permeability of reef-shoal carbonates in the Tarim Basin, Northwest China2
An analysis for unipole acoustic logging while drilling wavefields with varying eccentered collar positions2
Application of powerline noise cancellation method in correlation identification of controlled source electromagnetic method2
Lithospheric structure beneath southern Iberia and northern Morocco constrained by 3D Kirchhoff-approximate GRT imaging2
Least-squares reverse-time migration in VTI media using a T-distribution-based misfit function2
Seismic radiation analyses in anisotropic media based on general dislocation source model2
Crustal structures beneath the Northern Jiangsu Basin and its surrounding areas: implications for geothermal prospecting2
Flooding mechanism of biolithite based on progressive ion exchange model: an example of the Wangxuzhuang biolithite reservoir in the Dagang oilfield2
Fixed-loop TEM surveying using the SQUID magnetometer for deep mineral exploration in a conductive area2
Extracting angle domain common image gather with variable density acoustic-wave equation2
An optimised one-way wave migration method for complex media with arbitrarily varying velocity based on eigen-decomposition2
Efficient pure qP-wave simulation and reverse time migration imaging for vertical transverse isotropic (VTI) media2
Anisotropic viscoacoustic wave modelling in VTI media using frequency-dependent complex velocity1
Boundary recognition of tunnel lining void from ground-penetrating radar data1
Integration of EM techniques for mapping buried historical harbours: a case study from the archaeological site of Tell el-Rub'a, Egypt1
A novel phased-array transmitting source in controlled-source audio-frequency magnetotellurics1
Denoising for airborne transient electromagnetic data using noise-whitening-based weighted nuclear norm minimization1
Experimental research on the instability characteristics of the overlying strata structure that characterizes shallow interval goaf mining1
Simultaneously computing the 3D dip attributes for all the time samples of a seismic trace1
Nonstationary phase-corrected full-waveform inversion with attenuation compensation in viscoacoustic medium1
Evaluating imaging uncertainty associated with the near surface and added value of vertical arrays using Bayesian seismic refraction tomography1
An improved LTI algorithm for multiphase raytracing in undulating surface model1
An extraction method of dispersion curve from vertical seismic profiling data1
High-precision magnetization vector inversion: application to magnetic data in the presence of significant remanent magnetization1
Electrical resistivity imaging of an enhanced aquifer recharge site1
Application of the transfer learning method in multisource geophysical data fusion1
Upper Cretaceous paleoenvironmental changes and petrophysical responses in lacustrine record (Songliao Basin, NE China) and marine sedimentary deposit (Goban Spur Basin, NW Europe)1
Global apparent resistivity definition for a high-performance TEM excitation source1
Creep hardening damage constitutive model of coal with fracture proppant1
Gas coal delamination recognition method based on the Fisher discriminant function of trace element characteristics1
Comparison of map metrics as fitness input for assisted seismic history matching1
Characterization of potential Cu-Au mineralization using electrical resistivity and induced polarization methods: a case study in Eastern Labo, Bicol, Philippines1
Nonstationary pattern-based signal–noise separation using adaptive prediction-error filter1
A new denoising strategy and the X-shaped supplement denoising operator targeting time-reversed mirror imaging technique1
Position optimisation for a roadway under small coal mines in same coal seam: a case study1
Goaf area detection using high-precision wavefield imaging method of ground-airborne transient electromagnetics1
Seismic random noise attenuation using DnCNN with stratigraphic dip constraint1
Precise prediction of the collapse column based on channel wave spectral disparity characteristics and velocity tomography imaging1
Calibration method of azimuth electromagnetic boundary detection logging while drilling based on air–seawater double-layer dielectric as reflection interface1
Numerical investigation on seismoelectric wave fields in porous media: porosity and permeability1
3D acoustoelastic FD modeling of elastic wave propagation in prestressed solid media1
An advanced detection method for unfavorable geological boulder based on electrical source in drill holes under shield machine1
One-dimensional full-waveform inversion for magnetic induction data in ground-based transient electromagnetic methods1
Research on acoustic logging while drilling transmitting technologies1
Estimation of weak anisotropy parameters and fracture density of asymmetric fractures in monoclinic medium1
Imaging Islamic architecture in the multileveled archaeological settlement of Tell Dibgou, Northeast Nile Delta, Egypt1
The strain characteristics of cracked anchored soft rock under short-term creep1
Detecting fracture zones in granite with seismic and audio-magnetotelluric methods1
A method for characterization of stress concentration degree of coal mine roadway surrounding rock1
A protective seam mining method by cutting roof with chainsaw arm machine1
Robust full-waveform inversion based on automatic differentiation and differentiable dynamic time warping1
The quantitative characterization of hydraulic fracture connectivity from a postmortem investigation1
2D investigation of water permeability in hydrate-bearing sediment with coexisting hydrate growth habits1
Disposition of magmatic eruptions and fault distribution in northwestern Saudi Arabia using pseudo-depth slice magnetic anomaly1
Discontinuous finite element method for efficient three-dimensional elastic wave simulation1
Determining crack initiation stress in unconventional shales based on strain energy evolution1
Seismic geomorphological analysis of channel types: a case study from the Miocene Malay Basin1
Multichannel adaptive deconvolution based on streaming prediction-error filter1
Estimating model parameters from SP anomaly of sheet-shaped sources using differential search and particle swarm optimization algorithms1
Electromagnetic propagation logging while drilling data acquisition method based on undersampling technology1
Investigation of urban active faults using the short-offset transient electromagnetic method: an example from Shunping, Hebei Province, China1
2D cross-hole electromagnetic inversion algorithms based on regularization algorithms1
Plane-wave least-squares diffraction imaging using short-time singular spectrum analysis1
Filtering of a Ricker wavelet induced by anelastic seismic wave propagation and reflection1
Experimental study on the receiving piezoelectric vibrator of azimuthal acoustic logging1
NMR investigation on gas desorption characteristics in CBM recovery during dewatering in deep and shallow coals1
U-net-based pseudoseismic imaging for the short-offset transient electromagnetic method1
Two-dimensional complex wavelet transform for linear noise attenuation and image decomposition1
Intelligent data-driven denoising based on texture complexity1
High-resolution seismic impedance inversion integrating the closed-loop convolutional neural network and geostatistics: an application to the thin interbedded reservoir1
Porosity prediction from prestack seismic data via deep learning: incorporating a low-frequency porosity model1
Viscoacoustic least-squares migration with a blockwise Hessian matrix: an effective Q approach1
Azimuthal seismic reflection characteristics with quality factor Q in viscoelastic horizontal transverse isotropic media1
Three-dimensional P-wave model of the shallow crustal structure, a complementary method for detecting a trapped hydrocarbon: a case study in the DehDasht region, SW Iran1
Structural implications of potential field data on Southeastern North America1
Horizon auto-picking with quantitative uncertainty evaluation by using a modified VQ-VAE framework1
Born approximation imaging technique for electrical source multi-component TEM1
Uncertainty analysis of numerical inversions of temperature logs from boreholes under injection conditions1
Multisource stress data constraints on Cretaceous—present regional tectonic stress field evolution in the southern Jinzhou area, North China Craton1
Borehole radiation and reception responses for azimuthal shear-wave reflection imaging with an off-centred dipole acoustic tool1
Shadow effect and source overprint effect of short-offset transient electromagnetic method1
An efficient 3D wave-equation pre-stack time migration for high-density and wide-azimuth data1
Elastic wave pre-stack reverse-time migration based on the second-order P- and S-wave decoupling equation1
0.026680946350098