International Journal of Environmental Science and Technology

Papers
(The median citation count of International Journal of Environmental Science and Technology is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Comparative study of CO2 and steam activation on carbon-derived tire waste for effective arsenic removal from water163
Experimental assessment of bulk vs microfluidic reactors for nano-bio-photocatalyst synthesis and antibiotic degradation161
KOH-activated lightweight expanded clay aggregate (LECA) for malachite green adsorption: activation mechanism and adsorption process assessment145
Clay/polymer nanocomposite material: a sustainable approach of leather industries wastewater treatment144
Bioremoval of cadmium by co-cultivated bacterial strains, Bacillus paramycoides and Bacillus subtilis, in a pilot-scale phyto- and rhizoremediation approach96
Dynamic behavioral characteristics of maritime liquefied petroleum gas freight rate74
Functionality of denitrification with minerals composition, process conditions and microbial community71
Evaluation of groundwater quality at Shahid dam site using statistical and geostatistical methods (south of Semirom city, Iran)69
A rapid colorimetric method for the determination of lead (II) at low concentrations in aqueous solution68
Revisiting bibliometric methods in natural solvent research (Int J Environ Sci Technol. 2024 Jul 1)65
The effect of carbon coating on the arsenite sorption by magnetic carbon nanocomposites61
Microplastic pollution scenario and its effects on public health and ecosystem: a Bangladesh perspective58
Comparison of classical and sensor-based methods for determination of indoor air quality57
Biosorption of Bromocresol green from aqueous solution by Earliella scabrosa fungal biomass in removal of environmental pollutants57
Evaluation of the effect of a new alternative fuel containing boron and hydrogen on gasoline engine performance and emission responses57
Application of geographic information systems with artificial neural networks technique in prediction of wind energy potential; the case of Isparta Province, Türkiye55
Health risk and heavy metal assessment in soils and vegetables sourced from Amaonye forest Farmland, Eastern Nigeria55
Environmental availability of some trace metals in dredged sediments disposed on-land before use in fired brick processing55
Occurrences of antibiotic resistant bacteria in a tropical river impacted by anthropogenic activities in Ho Chi Minh City54
Tannery wastewater treatment process to minimize residual organics and generation of primary chemical sludge54
Reducing the transfer kinetics and holdup enhancement of antibiotics in soil by modifying its composition using montmorillonite54
Effects of polyaniline-polyethylene glycol modified with surfactants for Cefazolin removal in aqueous media54
The effect of Triton X100 and Tween 80 surfactants on diesel removal from soil using electrokinetic remediation53
Effects of thermo-chemical and enzymatic pre-treatment of tropical seaweeds and freshwater macrophytes on biogas and bioethanol production53
Hydrophobic deep eutectic solvent-based dispersive liquid–liquid microextraction for the zinc determination in aqueous samples: multivariate study52
Occurrence and removal of antibiotic resistant Escherichia coli and antibiotic resistance genes in an urban wastewater treatment plant51
The relative contributions of iron and aluminum oxides to ferrocyanide retention in soils: a comparative study51
A geological interpretation method for non-uniform survey51
Bioclimatic comfort in urban planning and modeling spatial change during 2020–2100 according to climate change scenarios in Kocaeli, Türkiye50
Current trends on extraction of water from air: an alternative solution to water supply48
Mechanistic insight into amoxicillin removal by natural sepiolite48
Selective and sensitive detection of aqueous contaminants via coinage metal-enhanced fluorescence with diiminic Schiff bases47
Nanoscale zero-valent-iron-loaded sugarcane bagasse composite as an efficient adsorbent for phosphate sorption from aqueous solution47
Modeling and techno-economic study of a solar reverse osmosis desalination plant47
Effects of climate change and human activities on environment and area variations of the Aral Sea in Central Asia47
Application of residue of degraded waste plastics as a sorbent for the removal of zinc (II) ions45
Performance-based comparative study of commercial polymeric nanofiltration membranes for ionic retention from synthetic water45
What is the best option for surgical face mask wastes treatment? Integrated LCA and MCDM methodologies44
Designing long-term scenarios for Iranian electricity sector: a novel integrated scenario planning approach based on MCDM method43
Offshore extinctions: ocean acidification impacting interstitial fauna43
Valorization of residual ashes from boiler combustion process into activated carbon for adsorption of food industry wastewater42
A high-efficiency Pebax® 1657-based mixed matrix membrane containing molybdenum oxide particles for enhanced CO2/N2 separation42
Assessing forest health using remote sensing-based indicators and fuzzy analytic hierarchy process in Valmiki Tiger Reserve, India42
Reusable lemon juice microwave-activated rice husk biochar for lead and mercury removal in solution42
Feasibility of Fenton-based oxidation for reducing organic content, toxicity, and carbon footprint of automotive industry wastewater42
Rare earth elements for enhancing photocatalysis in pollutant degradation and water treatment42
Calculate the best slope angle of photovoltaic panels theoretically in all cities in Turkey42
Interrelationship among institutional quality, energy consumption and environmental degradation in Australia: a dynamic autoregressive distributed lag approach41
Analyzing the relationship between lichen biodiversity indicators and disturbances in investigating the quality of forest ecosystems41
A comprehensive analysis of the advantages and disadvantages of pulsed electric fields during soil electrokinetic remediation41
Correction: Assessment of groundwater sustainability in arid and semi-arid regions using a fuzzy Delphi method41
Study on the performance of 3D printed layered filler in moving bed biofilm reactor41
Significant hydrogen production by Enterococcus faecium IITGEN1 and Proteus mirabilis IITGEN2 newly isolated from local waste sources40
Effects of atmospheric pollution and vegetation on nitrogen and phosphorus content in agri-forest watersheds under climate40
Assessing the relationship between digital service trade and carbon emissions: evidence from RCEP countries40
Simultaneous removal of cadmium and lead ions from aqueous solutions by nickel oxide-decorated reduced graphene oxides39
Analysis of physicochemical properties and bacterial diversity of stevia waste composting: feasibility of waste mud composting39
Carbon nanotube/bentonite @ polyvinylidene fluoride tri-flouro ethylene nanocomposite matrix for surpior elimination of carcinogenic dye from wastewater37
Evaluation of pumice stone as an alternative low-cost adsorbent for atenolol removal, an emerging contaminant37
Experimental study of remediation of wastewater with low concentrations of uranium using Syngonium podophyllum-endophyte symbiotic systems37
Flow field and pressure characteristics in pulse-jet dust cleaning37
Impact of nutrient enrichment on habitat heterogeneity and species richness of aquatic macrophytes: evidence from freshwater tropical lakes of Central Ganga Plain, India36
Impact of the opening of high-speed rail on environmental pollution in the Yangtze River Economic Belt: Promoting or inhibiting?36
Effects of landscape structure on river water characteristics: a multi-scale analysis36
An image-based deep learning model for water turbidity estimation in laboratory conditions35
Application of chitosan-Acacia nilotica bio-composite for wastewater treatment and significance of RSM-model for parametric optimization35
Relative importance of climatic and anthropogenic factors on runoff change at watershed scale34
Exploring biosorption and bioaccumulation capacities of cyanobacteria Nostoc and Anabaena for remediation of heavy metals in wastewater34
Black cumin bioactive compounds as eco-friendly novel green herbicides in wheat cropping: application to reduce chemical herbicides pollution34
Synthesis and characterization of Ceria incorporated Nickel oxide nanocomposite for promising degradation of methylene blue via photocatalysis34
Soil erosion and landslide susceptibility insights based on hierarchical clustering and multilayer perceptron networks: a Nigerian case study34
Eco-efficiency assessment of liquid dishwashing detergents33
Eco-friendly organic nanomaterials for multifunctional textiles: sources, applications, recent advances and future prospects towards sustainability33
Sustainable approach for photocatalytic and sorptive abatement of crystal violet dye using antimony-doped cerium vanadate (Sb-CeVO4)33
Photocatalytic removal of diazinon with Ag-coated SiO2@TiO2 core–shell using the response surface methodology33
Fabrication of phosphorus-doped graphitic carbonitride towards the photodegradation of ciprofloxacin and sulfamethoxazole32
Biosorption potential of Bacillus anthracis PM21 for the sequestration of cadmium, chromium, and nickel from contaminated water32
An optimization model for construction project scheduling by considering CO2 emissions with multi-mode resource constraints under interval-valued fuzzy uncertainty32
Synthesis and characterisation of waste-based composites from banana fibre and low-density polyethylene32
Energy yield of solar PV in 34 Indonesian cities with respect to various roof pitches and orientations31
Ion-exchanged commercial-zeolites for O2 production and CO2 capture by swing adsorption technology: a brief review31
Detection of organochlorine pesticides residue and trace metals in vegetables obtained from Iwo market, Iwo, Nigeria31
Application of membrane bioreactor integrated with ultraviolet disinfection for simultaneous greywater treatment and SARS-CoV-2 removal30
Potential application of spent mushroom compost (SMC) biochar as low-cost filtration media in heavy metal removal from abandoned mining water: a review30
Synthesis of non-active electrode (TiO2/GO/Ag) for the photo-electro-Fenton oxidation of micropollutants in wastewater30
Scaling up soil electrokinetic removal of inorganic contaminants based on lab chemical and biological optimizations30
Colloid and colloid-facilitated contaminant transport in subsurface ecosystem—a concise review29
Review of natural and anthropogenic emissions of carbon dioxide into the earth’s atmosphere29
Removal of stable and radio isotopes from wastewater by using modified microcrystalline cellulose based on Taguchi L1629
Microbial transformation to remediate mercury pollution: strains isolation and laboratory study29
Valorizing papaya seed waste for wastewater treatment: a review29
Utilization of chemically modified coal fly ash as cost-effective adsorbent for removal of hazardous organic wastes29
Produced water treatment and its green future in the oil and gas industry: a multi-criteria decision-making study29
Microalgae-based wastewater treatment system: current state, antibiotic resistant bacteria and antibiotic resistance genes reduction potentials29
Assessing and mapping the groundwater quality of Taluka Larkana, Sindh, Pakistan, using water quality indices and geospatial tools29
Effects of pre-oxidation by ozone, permanganate and ferrate on generation and toxicities of disinfection byproducts29
Automatic extraction of highly risky coastal retreat zones using Google earth engine (GEE)28
A multi-criteria performance assessment of concentrated solar power plants for site and technology selection in Egypt28
Removal of fluoroquinolone antibiotic from wastewater based on immobilized metal affinity mechanism28
Effective synergistic removal of NO and dichloromethane from flue gas based on Ce-modified V-W/Ti catalysts28
Editorial Expression of Concern: An overview of global energy scenarios by 2040: identifying the driving forces using cross‑impact analysis method28
Model-based evaluation of three different A2O processes in the presence of carbon and metal dosages28
Prioritizing of industrial wastewater management processes using an integrated AHP–CoCoSo model: comparative and sensitivity analyses28
Optimization of a two-stage reverse osmosis pilot system for Caspian seawater desalination using response surface methodology: SEC reduction through recovery increase, Fe fouling, and scaling control28
Developing of HSE management system model and its application in sustainable development planning, based on artificial intelligence27
Surface sediment quality of the Red River (Vietnam): impacted by anthropogenic and natural factors27
Start-up and operation of an activated sludge effluent treatment system in an agro-industrial complex27
Removal of 3-chlorocarbazole using a Fe/Ni bimetallic nanocomposite as an effective catalyst: characteristics and mechanism27
Investigation on baler technology for ex situ paddy residue biomass management with energy consumption analysis for wheat establishment27
Assessing and geostatistical mapping of metal contamination in the polar arable plot (Yamal-Nenets Autonomous District, Russia)27
Recycling valuable elements from aluminum dross26
Mobility pattern, risk assessment of heavy metals in soil-dust and hazards of consuming vegetables at auto-body workshops26
Modelling chlorine residuals in drinking water: a review26
Practice of wastewater irrigation and its impacts on human health and environment: a state of the art26
Simultaneous decolorization/degradation of AB-113 and chromium(VI) removal by a salt-tolerant Klebsiella sp. AB-PR and detoxification of biotransformed-metabolites25
Concentration and translocation of trace metals in Solidago gigantea in urban areas: a potential bioindicator25
Analysis and forecast of China's carbon emission: evidence from generalized group method of data handling (g-GMDH) neural network25
A review on emission and performance of water diesel micro-emulsified mixture-diesel engine25
Noise vulnerability assessment using an integrated approach of multi-criteria decision-making model and geospatial techniques25
Maximum electrodeposition capacity of Pb on a stainless-steel cathode using a galvanostatic regime25
Factors influencing the transfer and abundance of antibiotic resistance genes in livestock environments in China25
The challenges of micropollutants and their environmental detection through biochar-based nanostructured electrochemical sensors: a review25
Horizontal subsurface flow constructed wetlands as post-treatment of aerated pond effluent25
Comparative study between GRA and MEREC technique on an agricultural-based MCGDM problem in pentagonal neutrosophic environment24
Stable and effective photo-Fenton catalysts of Fe-alginate/PVDF composite electrospun nanofibers for the removal of methylene blue24
6-Stroke water injection engine literature review with an introduction of heat transfer and thermodynamic analysis24
Green adsorbent for CO2 adsorption: MgO impregnated palm kernel shell-based activated carbon24
Green synthesis of calcium oxide nanoparticles impregnated activated carbon from algal–bacterial activated sludge: its application in ciprofloxacin removal24
Microbe-assisted phytoremediation of domestic and tannery wastewater: in vitro application of a macrophyte mixture for contaminant removal24
Naphthalene partitioning from creosote of a contaminated site in Brazil24
Recent developments in omics techniques for improving plant abiotic stress using microbes24
Application of the sono-Fenton/UV process on the treatment of table olive processing wastewater24
Enhancement of cyanobacterial blooms buoyancy by controlling extracellular polysaccharides content and cation concentration under light-limited condition24
Vermicompost from sewage sludge: effects on heavy metal presence in soil and bioaccumulation in castor bean24
Influence of compositional and structural characteristics on food waste for biogas production23
Acetate based CaMnO3 thermoelectric material synthesis: effects on efficiency, phase formation, and microstructural change23
Ecological security evaluation and spatial–temporal evolution characteristics of natural resources Based on wind-driven optimization algorithm23
Minimizing fuel emission by optimizing ship scheduling considering priorities and release times23
Influence of mass concentration, cement-to-tailings ratio, and stirring duration on the strength of CPB considering pore characteristics23
Phosphorus adsorption of a residue from the pulp and paper industry (grits): contributions to tertiary wastewater treatment23
Evaluation of heavy metals and polycyclic aromatic hydrocarbons pollution in residential, agricultural and commercial soils in Ngong, Kenya23
Increasing opportunities for component reuse on printed circuit boards using deep learning23
Examination of the performance effects of refrigerants in a multistage refrigeration cycle using advanced exergy analysis23
Adsorption of carbon monoxide on novel and Merck activated carbon treated by dielectric barrier discharge23
Vermicomposting of gastro waste does not produce high-quality fertilizer23
Analysis and sampling of atmospheric particles of precipitation sub-events in Istanbul, Turkey23
Remediation of organophosphate pesticide-contaminated soil using soil washing and advanced oxidation processes23
Influence of diethyl ether on exergy and emission characteristics of diesel engine with waste cooking oil methyl ester22
Mitigation of environmental impacts in warm-weather wastewater treatment plants using the life cycle assessment tool22
Case studies on energy performance of walling materials in various regions22
Characterization of fouled ultrafiltration membranes from a full-scale wastewater reclamation plant in iron and steel industry22
Biosynthesis of selenium nanoparticles using Trigonella foenum-graecum L extract and examination of their photocatalytic and cytotoxic properties22
Designing of stable copper ferrite-doped metal–organic framework heterostructure for improved visible light-induced photodegradation of 4-nitrophenol in water22
Novel green sorbent Aerva Javanica for dyes remediation from aqueous media and future prediction through QSPR modeling22
Comment on “A new approach to stabilization of calcareous dune sand” [Int. J. Environ. Sci. Technol. 19, 3581–3592 (2022)]22
Microbiological methods for removing heavy metals from saline water-based drilling mud: challenges and practical strategies22
Biodegradability of bioplastic film using different regions of Pennisetum purpureum incorporated with gelatine and chitosan22
Cradle-to-factory gate environmental impact of the dairy sector in Haryana, India22
Pineapple waste biosurfactant: sustainable soil clean up via optimization, characterization and sorption kinetics22
Novel nafion-palygorskite composite for Pb/Lead treatment22
Assessment of integration options of hybrid biological reactor in a petrochemical wastewater treatment plant22
Development of a new formulation of air revitalization tablets in closed atmospheres using the Taguchi statistical method22
Physicochemical and computational analysis of the melamine resin derivative for the glyphosate absorption from water using Langmuir-type model22
Effects of cadmium and nickel interaction on growth and some physio-biochemical indices of Calotropis procera (Aiton) W.T.Aiton21
Correction: Health risk assessment of nitrates and fluorides ingestion and geochemical evaluation of groundwater characteristics in semi-arid regions21
Strategies for enhancing landscape thermal comfort in traffic squares under extreme heat21
Novel approach of thionyl chloride detection and disposal using a benzimidazole-based derivative: perspectives and proposals21
Enhanced chromium (VI) removal by Anacardium occidentale stem bark extract-coated multiwalled carbon nanotubes21
Intelligent irrigation scheduling scheme based on deep bi-directional LSTM technique21
Efficient removal of Ceftriaxone from simulated wastewater using carbonaceous 2D MXenes21
Facile removal of emerging pollutants using mesoporous TiO2 nanoparticles synthesized via xanthan gum templated greener protocol20
Moving towards green university: a method of analysis based on multi-criteria decision-making approach to assess sustainability indicators20
An efficient hybrid weather prediction model based on deep learning20
Assessment of seven different global climate models for historical temperature and precipitation in Hatay, Türkiye20
Hydrothermal carbonization of plastic wastes and effect of influential parameters on performance and challenges: a review20
Caffeine removal from water using rice husk residue biochar: characterization, kinetics and sorption isotherms20
A hybrid process of electrocoagulation and electro-Fenton for treatment of paper wastewater20
Effect of chitin, chitosan and NaCMC biopolymers on the consistency limits of organic silt20
Direct interspecies electron transfer performance through nanoparticles (NPs) for biogas production in the anaerobic digestion process20
Climate change and irrigation expansion in Northwest Minas Gerais, Brazil: the need for hydroclimatic monitoring20
Adsorption of congo red using carbon from leaves and stem of water hyacinth: equilibrium, kinetics, thermodynamic studies20
Different advanced oxidation processes for the abatement of pharmaceutical compounds20
Pollution and contamination level of Cu, Cd, and Hg heavy metals in soil and food crop20
Nickel nanoparticles synthesized from Psidium guajava peels mediated degradation of Orange E3 dye reactive dye: a sustainable approach20
Meteorological AQI and pollutants concentration-based AQI predictor20
Testing the validity of disaggregated agricultural-induced growth–environmental pollution nexus in selected emerging economies19
Evaluating the consequences of household hazardous waste diversion on public health and ecological risks of leachate exposure19
Transport of a severe dust storm from Middle East to Indian region and its impact on surrounding environment19
Ecological modeling of climate change effects on priority  species of the Liliaceae family in Iran19
Present status and mitigation approaches of arsenic in the environment of Bangladesh: A critical review19
An investigation of the PM2.5 concentrations and cumulative inhaled dose during subway commutes in Changchun, China19
Deciphering the effects of plasticizers in potato-based bioplastic for food and fresh produce packaging19
Acid-modified coffee grounds biochar for nitrate and nitrite removal: an optimization via central composite design19
Modelling climatic variable impacts on ground-level ozone in Malaysia using backward trajectory and Generative Additive Models19
Life cycle assessment of new bio-based coagulant production for sustainable wastewater treatment19
An investigation of bioleaching and valorization of hazardous zinc plant purification residue using Aspergillus niger19
Biosorption of Congo red dye removal from aqueous solution using fennel seed spent and garlic peel19
Improvement of different biopolymers on electroosmotic consolidation of soil19
The influence of effective capital, technological innovation and energy efficiency on environmental sustainability on the European region19
An approach to forecast pollutants concentration with varied dispersion19
Investigation of pre-treatment techniques to improve membrane performance in real textile wastewater treatment19
Driving forces of land use change in the Tiexi old industrial relocation area, Shenyang, China19
Impact of environmental factors on the spread of dengue fever in Sri Lanka19
Microbial calcite induction: a magic that fortifies and heals concrete19
A comprehensive overview of environmental footprints of water desalination and alleviation strategies19
Application of nonwoven microfiltration membrane on activated sludge final effluent: improving wastewater quality for reuse18
Radiation hazards and extremophiles bioaccumulation of radionuclides from hypersaline lakes and hot springs18
Production and characterization of ginger (Zingiber officinale Roscoe) as adsorbent of glycerol stream from biodiesel production18
Adsorption of methylene blue onto spent alchemilla vulgaris leaves: characterization, isotherms, kinetic and thermodynamic studies18
Exploring land use/land cover change by using density analysis method in yenice18
Content and gradation of aggregates effect on compaction property of gangue backfill and strata movement: experiments and models18
Utilization of supplementary cementitious materials in pervious concrete: a review18
Characteristics of microplastics in sediment of the Vaal River, South Africa: implications on bioavailability and toxicity18
Sorption of zinc chloride complexes from acid-based solutions by using anionic resins: process optimization and modelling18
Comparison of waste plastic fuel, waste cooking oil biodiesel, and ultra-low sulfur diesel using a Well-to-Exhaust framework18
Recruiting endophytic bacteria of wetland plants to phytoremediate organic pollutants18
Performance and characteristics of dynamic membranes for dairy wastewater treatment under anaerobic conditions18
Research on the influence of environmental regulation on technological innovation efficiency of manufacturing industry in China18
Impact of COVID-19 force confinement for CO2 emission, NO2 concentration, and daily traffic congestion throughout EU nations and the United Kingdom (UK)18
Chromite ore addition to serpentinized magnesite mining wastes for the production of refractory products following thermal treatment17
Microorganisms-assisted degradation of Acid Orange 7 dye: a review17
Solid–liquid separation of V(V) from aqueous medium by 3-(2-hydroxy phenyl)-imino-1-phenyl butan-1-one Schiff base immobilized XAD-2 resin17
Dealing with uncertainty along the Kan River, Tehran: planning the Kan River based on social-ecological resilience17
Removal of arsenic (III and V) from aqueous solution using stable maghemite (γ -Fe2O3) loaded pumice composite17
Solar radiation estimation using ANFIS model: evaluation of membership function types and data selection17
Combined effects of drought stress and different forms of nitrogen deposition as response mechanism to environmental change17
Selection of endophyte and indigenous bacteria degrading textile wastewater in floating treatment wetland17
Effects of human physiological thermoregulation on thermal comfort in a naturally ventilated environment in summer17
Analysis of the microbial diverisity and the mechanism of simultaneous nitrification and denitrification in high nitrogen environments17
Biorestoration strategies of a highly weathered mine tailings, Zimapán, México17
Prevention of COVID-19 pandemic through technological innovation: ensuring global innovative capability, absorptive capacity, and adaptive healthcare competency17
Contamination, health risk assessment, and spatial distribution of heavy metals in soils from gold mining district, Ghana16
Simultaneous remediation of soil contaminated by mercury ions and acetochlor using CTAB and DTAB modified bentonites16
For reducing CO2 emissions, what is the most effective: making power plants more efficient or developing renewable resources?16
Serial installation of massive weirs impacts the nutrients, solids, chlorophyll, and water chemistry along the river gradient16
An approach to quantify the contamination potential of hazardous waste landfill leachate using the leachate pollution index16
Influences of greenly synthesized iron oxide nanoparticles on the bioremediation of dairy effluent using selected microbial isolates16
Leaching characteristics of Cr in municipal solid waste incineration fly ash solidified/stabilized using blast furnace slag-based cementitious materials16
Two-faced nanomaterials: routes to resolve nanowaste16
Clustering tall building typologies and analyzing their composite impacts on wind environments in infill development projects16
Cost-effective strategies to improve crop water productivity—case study: Bakhtegan and Maharloo, Iran16
Reclamation of coal mining subsidence based on people’s esthetic preference16
Fe-Mn-textile waste synthesis for COD and color removal from textile wastewater by UV/S2O82− oxidation16
Environmental parameters and habitats of Dorema ammoniacum (D. Don) in south-central Alborz Dorema ammoniacum (D. Don) habitat parameters in south-central Alborz16
Feasible techniques for valorisation of construction and demolition waste for concreting applications16
Valorization of aquatic weed Salvinia minima to value-added eco-friendly biosorbent: preferential removal of dye and heavy metal16
Isolation and characterization of a novel bacterial strain Cytobacillus firmus RP5 for the degradation of petroleum hydrocarbons16
16s-RNA sequencing analysis of the influence of UV radiation on the metabolic pathways of pollutants in the A2O process16
Sources and risk assessment of soil heavy metals in typical tailings ponds of Mouding city, China16
Investigation on microstructure and selected properties of aluminum oxide–copper–nickel ceramic–metal composites16
0.093899965286255