Advances in Materials Science and Engineering

Article	Citations
Microstructural Evolution during Thermal Exposure of G115 Steel and Its Influence on Mechanical Properties	102
Experimental and Mathematical Studies for Optimality of GTAW Parameters on Similar and Dissimilar Steel Substrates	99
Experimental Investigation on Microstructure and Mechanical Properties of Friction Welded Dissimilar Alloys	89
Parameter Design in Carbonitriding of EN36, 16MnCr5, and AISI 4140 Steels Using Principal Component-Based Grey Incidence (PGI)	71
Synthesis and Characterization of a Novel Bentonite Composite Superabsorbent Resin Based on Starch	57
Progressive Failure Analysis of Laminated CFRP Composites under Three-Point Bending Load	56
Microstructure Effects of the Electrical Discharge Machining Drill on Aerospace Super Alloys	53
Air‐Entraining Effect on Rheological Properties of Cement‐Based Mixtures	53
Investigation on the Effect of Butyl Acrylate (nBA) to Improve the Toughness Properties of Methacrylate-Based Waterproofing Adhesive Material (MMA) for the Steel Bridge Deck	51
Physicomechanical and Thermal Properties of Particle Board Produced Using Waste Ceramic Materials and Corncob	48
Continuously Varying Thickness Interference Bandpass Filter for the Visible Spectral Range: Using Ion Beam Sputter Deposition	48
Approximate Relationship for the Bond-Slip Using a Concrete Damage-Plastic Model	42
Application of Honeycomb Structures in Key Components of Space Deployable Structures	41
An Investigation on the Influences of Construction Schemes on Backfilling the River-Crossing Section of a Utility Tunnel	40
Study on Creep Mechanical Properties of Non-Water Reacting Polyurethane Grouting Material	40
A Beam Steering Dielectric Resonator Antenna Designed Using Rogers RO4003C Material for S-Band Applications	39
Microstructure Evolution and Work Hardening Behavior of Hot-Rolled DP780 Ferrite/Bainite Dual-Phase Steel	38
On the Adaptability and Effect of High Damping Rubber Bearings in the Seismic Resistance of Large Aqueducts	37
Finite Element Analysis of the Shear Capacity of Recycled Aggregate Concrete Beams with Corroded Stirrups	37
Experimental Analysis of Recycled Aggregate Concrete Beams and Correction Formulas for the Crack Resistance Calculation	36
Forging Temperature Effects on Crack Tip Creep Behaviour of Hot Hammer Forged Ti-6Al-4V Alloy	36
Axial Compressive Behavior of Lithium Slag Recycled Coarse Aggregate Concrete-Filled Circular Steel Stub Columns	35
Penetrating Power of High-Density Tungsten Fiber/Zr-Based Metallic Glass Matrix Composite	34
Effective Removal of Reactive Yellow 145 (RY145) using Biochar Derived from Groundnut Shell	33
The Impact of Multiple Autoclave Cycles on the Surface Roughness of Thermally Treated Nickel-Titanium Endodontic Files	32

Experimental Study on Mechanical Properties of Cement-Solidified Remolded Soil Reinforces by Polyvinyl Alcohol Fiber	31
Pattern Design of Ethnic Clothing Based on Stretchable Nanofiber Fabrics	30
Expression of Concern on “Monitoring of Sports Health Indicators Based on Wearable Nanobiosensors”	30
Retracted: Application of Laser Raman Spectroscopy of Ferroelectric Nanomaterial BaTiO3 in the Design of Color Spotlight Products on Stage	30
Analysis of the Coupling Effect of Thermal and Traffic Loads on Cement Concrete Pavement with Voids Repaired with Polymer Grout	29
Study on Stress Corrosion Properties of 1Cr17Ni2 Stainless Steel	29
Retracted: Innovative Application of Nano-Organic Photochromic New Materials in Hakka Traditional Decorative Pattern Design	28
Investigation of the TIG Welding Process for Joining AA6082 Alloy Using Grey Relational Analysis	28
Retracted: Microstructure and Fatigue Properties of 6061 Aluminum Alloy Laser-MIG Hybrid Welding Joint	27
Retracted: Application of Nanomaterials in Visual Effects of National Costume Pattern Design	27
Application of Nanomaterials in Visual Effects of National Costume Pattern Design	27
Application of Composite Nano-Bone Transplantation and Massage Exercise Rehabilitation Training in Patients Undergoing Limb Replantation	26
Retracted: Application of Nanocomposites with Thermal Barrier Coating in Heat Pump Heat Transfer Systems	26
Natural Fiber Incorporated Polymer Matrix Composites for Electronic Circuit Board Applications	26
Strength Characteristics and Failure Mechanism of Granite with Cross Cracks at Different Angles Based on DIC Method	26
Effect of TaC/Ti/Si3N4 Hard Ceramics on Mechanical and Microstructural Behaviour of AA7075 Processed through Stir Casting Process	26
Response of Partly Recrystallized Microstructure to the Rapid Heat Treatment in TC18 Alloy	25
Reliable Laboratory Tests: A Prerequisite for the Design of High-Quality Slurry Surfacing Mixtures	25
Durability Performance of Concrete with Fly Ash as Fine Aggregate Eroded by Chloride Salt	25
Experimental and Numerical Investigation of Energy Evolution Characteristic of Granite considering the Loading Rate Effect	24
Extraction and Characterization of Cellulose from Coffee Husk and Brewery’s Spent Grain Fibers Using Alkali-Hydrogen Peroxide Treatment Method	24
The Wound Healing Effect of Nanoclay, Collagen, and Tadalafil in Diabetic Rats: An In Vivo Study	23
Assessing the Prospect of Sustainable Biocomposites Produced From Corn Starch and Reinforced With Jute Spinning Mills Waste	23
Metallographic Investigation on Postweld Heat-Treated0.21%C-1020 Steel Plates Joined by SMAW Method	23
Experimental Investigation on Effect of Weight Fraction of Sisal Fiber on Mechanical Properties of Sisal-E-Glass Hybrid Polymer Composites	23
Investigation on Three-Body Abrasion Resistance of Mild Steel Soil Slurry Condition-Simulating Agricultural Condition	23
A Computational Method for Acoustic Interaction with Large Complicated Underwater Structures Based on the Physical Mechanism of Structural Acoustics	23
Effect of Defocusing Distance on Microstructural, Hardness, and Tribological Behavior of Ni-Cr-Si-B-C Powder Deposit on 316LN Austenitic Stainless Steel Substrate Using Laser Hard-Facing	23
Development of Compliant Vibration Isolation Damper and Its Performance Analysis in Turning Operation	22
Evaluating the Influence of Carbon Fiber on the Mechanical Characteristics and Electrical Conductivity of Roller-Compacted Concrete Containing Waste Ceramic Aggregates Exposed to Freeze-Thaw Cycling	22
Mesoscopic Fracture Model of Coarse Aggregate Interlocking Concrete	22
Surface Flaw Detection of Plug Valve Material Using Infrared Thermography and Weighted Local Variation Pixel-Based Fuzzy Clustering Technique	22
Creep Mechanical Properties of Granite under Combined Axial Compression and Water Pressure and Support Characteristics of Surrounding Rock	22
High-Temperature Performance Enhancement of Bitumen by Waste PET-Derived Polyurethane	21
Impact of AlN-SiC Nanoparticle Reinforcement on the Mechanical Behavior of Al 6061-Based Hybrid Composite Developed by the Stir Casting Route	21
Design and Experimental Study on Divergent Magnetic Fluid Seal with Large Clearance and Dual Magnetic Sources	21
Forming Parameters on Friction during Single Point Incremental Forming	20
Effect of Tungsten Carbide Addition on the Microstructure and Mechanical Behavior of Titanium Matrix Developed by Powder Metallurgy Route	20
Toward Sustainable Leather Processing: A Comprehensive Review of Cleaner Production Strategies and Environmental Impacts	20
Optimizing the Mechanical and Microstructure Characteristics of Stir Casting and Hot-Pressed AA 7075/ZnO/ZrO2 Composites	20
Bacteria-Induced Calcite Precipitation for Engineering and Environmental Applications	20
Retracted: Preparation and Properties of HGBTPU Composite Foam for Football Protection	19
Potential Assessment of E-Waste Plastic in Metakaolin Based Geopolymer Using Petrography Image Analysis	19
Retracted: A Comprehensive Examination of Bandgap Semiconductor Switches	19
Retracted: Performance and Exhaust Emission Characteristics of C.I Engine Using Biofuels and Its Diesel Blend with Nano-Additives	18
Design of Remote Monitoring Iot System Based on 5G and New Optical Fiber Intelligent Structure	18
Retracted: Mechanical Strength and Fatigue Fracture Analysis on Al-Zn-Mg Alloy with the Influence of Creep Aging Process	18
Retracted: Effect of SiC Particle Incorporated Dielectric Medium on Electrical Discharge Machining Behavior of AA6061/B4Cp/SiCp AMCs	18
Study on Rheological Characteristics of Uncemented Coal Gangue-Fly Ash Backfill (UCGFB) Slurry Based on Fractal Theory	17
Retracted: Control of Material Procurement Cost of Enterprises under the Background of the Low-Carbon Economy	17

Preparation and Properties of HGBTPU Composite Foam for Football Protection	17
Retracted: Heating Properties of Graphene Oxide Nanosheets and Their Application in Clothing Design	17
High-Temperature Creep Behavior of a Nickel-Based Single-Crystal Superalloy with Small-Angle Deviation from [111] Orientation	17
Retracted: Experimental and Thermal Investigation on Powder Mixed EDM Using FEM and Artificial Neural Networks	17
Retracted: Methane Extraction and Resource Utilization Based on Multisource Data Fusion	17
A Hybrid Nondominant-Based Genetic Algorithm (NSGA-II) for Multiobjective Optimization to Minimize Vibration Amplitude in the End Milling Process	16
Axial Compressive Behavior of Glass Fiber-Reinforced Hollow Concrete Columns	16
Characterization of Synthetic Brushite Material Precipitated at Room Temperature Developed for Kidney Stone Treatment	16
Preparation and Adsorption Performance on Congo Red of Sodium Alginate-Lanthanum Hydrogel Spheres	16
Application of Laser Raman Spectroscopy of Ferroelectric Nanomaterial BaTiO3 in the Design of Color Spotlight Products on Stage	15
Methodology for Determining the Compliance Matrix and Analyzing the Skew Anisotropic Plate with an Arbitrarily Shaped Hole	15
Experimental Investigation on the Shear Behavior of Interface between High Plastic Clay and Concrete	15
Dynamic Propagation Characteristics of a Mode-III Interfacial Crack in Piezoelectric Bimaterials	15
The Effect of Compression on the Void Coalescence under Strong Dynamic Loading	15
Vegetable Tannins as Chrome-Free Leather Tanning	14
Analysis of Optimal RAP Content Based on Discrete Element Method	14
Experimental Studies on Mechanical Behavior of TIG and Friction Stir Welded AA5083 -AA7075 Dissimilar Aluminum Alloys	14
Load Transfer Efficiency Analysis and Void Evaluation of Composite Pavement Cement Concrete Slab	14
Influence of Microstructural Characteristics on Wear and Corrosion Behaviour of Si3N4-Reinforced Al2219 Composites	14
Road Performance and Microscopic Mechanism Analysis of Modified Straw Fiber Asphalt Binder	14
Study on Developments in Protection Coating Techniques for Steel	14
Consolidation Attributes and Deformation Response of Soft Clay Reinforced with Vertical Scoria Drains under Road Embankment	14
A Review on the Effect of Various Chemical Treatments on the Mechanical Properties of Renewable Fiber-Reinforced Composites	14
Evaluating the Performance of Aluminum Oxide Nanoparticle-Modified Asphalt Binder and Modelling the Viscoelastic Properties by Using Artificial Neural Networks and Support Vector Machines	14
Investigations on the WEDM of Friction Stir Processed Magnesium/Graphene-Boron Nitride Hybrid Surface Composite through the Entropy-COPRAS Approach	14
Size-Dependent Thermoelastic Behavior Analysis of Functionally Graded Magneto-Electro-Elastic Cylindrical Shells Based on Modified Couple Stress Theory	13
Retracted: Dynamic Analysis and Fabrication of Single Screw Conveyor Machine	13
Retracted: Performance of Ferroelectric Materials in the Construction of Smart Manufacturing for the New Infrastructure of Smart Cities	13
Assessment of Rotational Speed and Plunge Rate on Lap Shear Strength of FSSW Joints of AA7075/Mild Steel	13
Effect of Repeated Weld Repairs on Microstructure and Mechanical Properties of Heat-Affected Zone in CA6NM Stainless Steel	13
Application of Composite Nanomaterials in the Teaching of Piano Touch Technology and Timbre Expressiveness	13
Retracted: Creativity of Nanofiber Materials and Application in the Expressive Power of Manual Tie-Dyeing Process	13
Investigation of Nonlinear Vibrational Analysis of Circular Sector Oscillator by Using Cascade Learning	13
Simulation Analysis of External Damage and Repair of the Gas Transmission Pipeline	13
Retracted: Improvement on Mechanical Properties of Submerged Friction Stir Joining of Dissimilar Tailor Welded Aluminum Blanks	13
Retracted: MoWS2 Nanosheet Composite with MXene as Lithium-Sulfur Battery Cathode Material	13
Construction and Performance Research of Reinforced Iron-Based Powder Metallurgy Materials Based on Phyllanthin as Drug Transport Carriers	12
Fabrication and Analysis of the HLM Method of Layered Polymer Bumper with the Fracture Surface Micrographs	12
Analysis of Coupling Effect and Heavy Load of High-Temperature Stability of Asphalt Mixture	12
Study on the Mechanical Properties and Thermal Conductivity of Cotton Stalk Fiber Heat-Insulating Shotcrete	12
Pharmaceutical Effluent Treatment Using Multi-effect Evaporator Process	12
800 MPa Class HSLA Steel Block Part Fabricated by WAAM for Building Applications: Tensile Properties at Ambient and Elevated (600°C) Temperature	12
A Calculation Method of Bearing Capacity of Single Squeezed Branch Pile Based on Load Transfer Method	12
Formability Characteristics and Penetration Performance of Micro-Jets from Different Materials	12
Progress of Laser Processing Technology in Ferroelectric Nanocomposites	12
Axial Compression Behavior of Rubberized Concrete-Filled Square Steel Tubular Columns after Exposed to High Temperatures	12
Research and Evaluation on Dynamic Response Characteristics of Various Pavement Structures	12
The Shear Damage Model of the Two-Component Forming Polymer Grouting Material-Bentonite Contact Surface	12
Retracted: Treatment of Comprehensive Wastewater from Chemical and Pharmaceutical Parks by Fly Ash-Coated Iron Electrode Electrocoagulation	12
Accumulative Plastic Deformation of the Improved Completely Weathered Granite Subgrade in High-Speed Railway	11
Effect of Microstructure on the Corrosion Fatigue Crack Growth of Low and Medium Steels	11
Effects of Earthquake on Behavior Characteristics of Fault Gouge in Time-History Analysis of Slope	11
Parameter Optimization and Bending Performance Analysis of a Corrugated Steel Plate-UHPC Composite Bridge Deck with PZ Shear Connectors	11
Functionalization of Carbon Electrodes with Nanotitania by Atomic Layer Deposition	11
Research on Rejuvenation of Styrene-Butadiene-Styrene Block Copolymer Modified Asphalt with Rejuvenating Agent Based on Pre-Mixing Method	11
Combined Influence of Particle Shape and Fabric on the Shear Behaviour of Granular Materials	10
Optimization of Stir-Squeeze Casting Parameters to Analyze the Mechanical Properties of Al7475/B4C/Al2O3/TiB2 Hybrid Composites by the Taguchi Method	10
Analysis of Instability Mechanism and Induced Cause of Urban Pavement in Xining City, China	10
Evaluating the Effectiveness of Nonwoven Geotextile-Encased Cinder Gravel Column in Improving Load-Bearing and Deformation Characteristics of Soft Clay	10
Progress in the Preparation of Large-Size High-Performance CuCr Alloys	10
Unsteady Radiative Maxwell Fluid Flow over an Expanding Sheet with Sodium Alginate Water-Based Copper-Graphene Oxide Hybrid Nanomaterial: An Application to Solar Aircraft	10
Research on the Relationship between Soil Shear Stress Level and Safety Factor	10
Experimental Study and Microscopic Analysis on Frost Resistance of Iron Ore Tailings Recycled Aggregate Concrete	10
Influence of Zinc-Saturated Zeolite on Portland Cement Hydration Kinetics	10
An Investigation on Effects by Adding Cerium and Lithium on Mechanical and Metallurgical Properties of AZ91D + XCe + XLi Cast Mg Alloy	10
Study of Problems Related to Laying Ballastless Track in the Turnout of Ballasted Track at High-Speed Railway Stations	10
Local and Global Interactive Buckling Capacity of Thin-Walled Box-Section Members of BS700 High-Strength Steel under Axial Compression	10
Comparative Study of Mortars Made with Sands of Different Geological Origin	10
Separation and Improvisation of a Unique Natural Cellulosic Fiber From the Exterior Sheet of Bangladeshi Amaranthus viridis	10
In Vitro Comparison of the Effect of Three Types of Heat-Curing Acrylic Resins on the Amount of Formaldehyde and Monomer Release as well as Biocompatibility	10
Thermogravimetric Analysis and Mechanical Properties of Pebble Natural Filler-Reinforced Polymer Composites Produced through a Hand Layup Technique	10
Examination of Friction Stir-Welded AA 6262/5456 Joints through the Optimization Technique	10
An Overview of Current and Prognostic Trends on Synthesis, Characterization, and Applications of Biobased Silica	9
Retracted: Characterization of Composite RFID Antennas Based on Thermal Properties: A Survey	9
Analysis of the Direct Shear Test and Microstructure of the Lunar Soil Simulant Solidified by Sodium Silicate	9
Optimization of Mechanical Properties and Manufacturing Time through Experimental and Statistical Analysis of Process Parameters in Selective Laser Sintering	9
Experimental Investigation on Reactive Orange 16 Removal Using Waste Biomass of Ulva prolifera	9
Microstructure and Stress Rupture Properties of K417G Superalloy at Different Hot Isostatic Pressing Temperatures	9
Retracted: Thermogravimetric Analysis and Mechanical Properties of Pebble Natural Filler-Reinforced Polymer Composites Produced through a Hand Layup Technique	9
Influence of High-Performance Composite Sports Equipment on Brand International Sports Marketing Strategy	9

Thermal Analysis of Ni-Cu Alloy Nanocomposites Processed by Sand Mold Casting	9
Retracted: Optimization of the Spark Plasma Sintering Process for High-Volume Fraction Tungsten Carbide/Al 2025 Composites	9
Retracted: Characteristics of Tight Oil Reservoir Based on Nano-CT	9
Analysis of the Performance Characteristics of ZnO Nanoparticles’ Dispersed Polyester Oil	9
A Neural Network-Based Prediction of Superplasticizers Effect on the Workability and Compressive Characteristics of Portland Pozzolana Cement-Based Mortars	9
Study on Mechanical Performance of ECC Reinforced by Polypropylene Fiber Mixed with Manufactured Sand and Carbon Black (CBMSPP-ECC) Based on Response Surface Method	9
A Simplified Finite Element Model for Modular Steel Structure Building Wallboard through Experimental Research and Finite Element Analysis	9
Effect of Using Modern Banking Services on Customer Inspiration: Statistical Analysis	9
Retracted: Nonlinear Matrix Ferroelectric Composites on Construction Quality and Safety Measures	9
Sugarcane Bagasse Fibers for Enhancing Moisture Susceptibility Properties in Stone Mastic Asphalt	9
Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method	9
Retracted: Influences of Aqueous Nanofluid Emulsion on Diesel Engine Performance, Combustion, and Emission: IoT (Emission Monitoring System)	9
Study on Mechanical Properties of Concrete-Filled Steel Tubular Members under Axial Tension	9
An Optimization of Particle Size and Additives of Slip Cast Alumina Samples to Reduce Warpage and Porosity	9
Optimization of Abrasive Wear Characteristics of Polyethylene/Acrylate Copolymer Nanocomposites	9
Flexural Behavior of Insulated Concrete Sandwich Panels using FRP-Jacketed Steel-Composite Connectors	9
Measurement of the Compressive Strength of Concrete Using Modeling of Deep Hybrid Forest Regression	9
Tang Sancai Cultural and Creative Product Design Based on Bi4Ti3O12 Ferroelectric Nanomaterials	9
Effect of Material Behaviour on Flow Uniformity over Different Spillway Weir Profiles	9
A Comparative Study of Metakaolin and Silica Fume on the Properties and Microstructure of Ultrafine Dredged Sand Mortars	9
Analysis of the Extension of the Elastic Parameters for Modelling Highly Expansive Unsaturated Soils with the Barcelona Basic Model	8
Treatment of Comprehensive Wastewater from Chemical and Pharmaceutical Parks by Fly Ash-Coated Iron Electrode Electrocoagulation	8
Retracted: Detecting Distance between Surfaces of Large Transparent Material Based on Low-Cost TOF Sensor and Deep Convolutional Neural Network	8
Creativity of Nanofiber Materials and Application in the Expressive Power of Manual Tie-Dyeing Process	8
Influence of Geometric Variations on the Compressive Strength of Concrete‐Filled Steel‐Reinforced Columns: A Nonlinear FEA Approach	8
Vortex Trajectory of Rotating Shaft Undergoing Vibration Coupling of Parallel Multicylinders	8
Fresh, Mechanical, and Microstructural Properties Investigation on the Combined Effect of Biomedical Waste Incinerator Ash and Bagasse Ash for High-Strength Concrete	8
Study of Various Epoxy-Based Surface Coating Techniques for Anticorrosion Properties	8
Impact of BN and WC Particulate Reinforcements on Mechanical Properties and Damage Development of Al-2048 Metal Matrix Composites	8
Determination of Constitutive Parameters of Crystalline Limestone Based on Improved RHT Model	8
Comparison of the Effect of Extracted Bacteriocin and Lytic Bacteriophage on the Expression of Biofilm Associated Genes in Streptococcus mutans	8
Multiple Quadratic Polynomial Regression Models and Quality Maps for Tensile Mechanical Properties and Quality Indices of Cast Aluminum Alloys according to Artificial Aging Heat Treatment Condition	8
Ternary Complexation Process for New Spectrophotometric Assay of Levodopa using Ni(II) and 2,3-Diaminopyridine	8
Retracted: Analysis of Pomegranate Dye Coated Titanium Nanotubes Anode for Solar Cell Application	8
Metal Cellulose Nanocomposites in Decorative Animation Character Modeling	8
Characterization of PVA Fiber-Reinforced Pervious Concrete with Blended Recycled Ceramic Aggregates and Natural Aggregate	8
Evaluation of Mechanical Behaviour of Multiwalled Nanotubes Reinforcement Particles in Jute-Glass Fibres Hybrid Composites	8
Thermoelastic Damping Limited Quality Factor Enhancement and Energy Dissipation Analysis of Rectangular Plate Resonators Using Nonclassical Elasticity Theory	8
Research on the Changing Law of Tunnel Temperature Field and the Application of Air Curtain System in Cold Regions	8
Microfriction Stir Welding of Aluminium Using ABB IRB 1410 Robot	8
Modelling of Modulus of Elasticity of Low-Calcium-Based Geopolymer Concrete Using Regression Analysis	8
A New Fractal Permeability Model for Porous Media Based on Rough Capillary Channels	8
Experimental Investigation on the Average Surface Roughness (Ra) of AlSi10Mg Alloy Manufactured by Laser Powder Bed Fusion Method	8
The Influence of the Different Cementitious Material on Self-Healing of Microcracks in Shotcrete	8
Topically Applied Luteolin /Quercetin-Capped Silver Nanoparticle Ointment as Antileishmanial Composite: Acceleration Wound Healing in BALB/c Mice	8
Factors Influencing Piezoelectric Response of Horizontally and Vertically Embedded PZT Patch in Confined Granular Fills	8
Mechanical Properties and Acoustic Emission Characteristics of Thawing Frozen Sandstone	8
Fracture Properties of Recycled Concrete Reinforced with Nanosilica and Steel Fibers	8
Effect of Boron Carbide Particles Addition on the Mechanical and Wear Behavior of Aluminium Alloy Composites	7
Comparative Analysis between 5th and 6th Generation Superalloys and Previous Generation Superalloys	7
Investigation of Interfacial Bonding Properties of Polyurethane Concrete and Cement Concrete/Steel Reinforcement	7
Autonomous Multiport Solar Power Plant with Lithium Ion Battery Storage Using a Voltage Source Inverter for Automotive Applications	7
Study on Damage of the OGFC Mixture Based on Characteristics of Void Distribution	7
Application of Nanoflexible Photoelectric Devices in Welding Tooling Equipment Systems	7
Experimental Investigation Monitoring the Saturated Line of Slope Based on Distributed Optical Fiber Temperature System	7
Retracted: Nanometer TiO2 Film-Based Solar Thin Film Manufacturing Technology and Performance Research	7
Retracted: Free Vibration Analysis of Thick Rectangular and Elliptical Plates with Concentric Cut-Out	7
Investigating the Effects of Recycled Micropowder and Aggregate on the Properties of Cement Stabilization of Crushed Aggregate (CSCA)	7
Experimental Analysis on the Feasibility of Bamboo Reinforcement in Concrete Mix Design and Comparison with Steel Reinforced Concrete	7
Characterization of Cold Bituminous Mastics Prepared with Different Active Fillers at High and Intermediate Temperature	7
Smart Fluids and Their Applications in Drilling Fluids to Meet Drilling Technical Challenges	7
Microstructural Dynamics of the Myocardium: Orientation of the Muscle Fibers and Occurrence of Cardiomyopathies	7
Mathematical Model and Numerical Simulation of Coalbed Methane Migration Considering the Adsorption Expansion Effect	7
Investigate the Process Parameter on the Friction Stir Welding of Dissimilar Aluminium Alloys	7
Retracted: Application of Digital Painting Technology in the Creation of an Oil Painting Containing Graphene	7
Control of Material Procurement Cost of Enterprises under the Background of the Low-Carbon Economy	7
A Review on Synthesis, Properties, and Environmental Application of Fe-Based Perovskite	7
Preparation and Properties of Nano-ZnO Combined with Biomass Heavy Oil Composite-Modified Asphalt	7
Research on Influencing Factors of Effective Gas Extraction Radius in Coal Mine Based on Multiple Linear Regression	7
Optimizing the Extraction of Keratin from Cattle Hoof Using Central Composite Design	7
Development of Quality Information Management System for Alumina Ceramic Tube Manufacturing Process	7
Effect of Apple (Malus domestica) Stem Cells on UVB-Induced Damage Skin with Anti-Inflammatory Properties: An In Vivo Study	7
Retracted: Optimization of Remazol Black B Removal Using Biochar Produced from Caulerpa scalpelliformis Using Response Surface Methodology	7
Retracted: Research on the Injection Mold Design and Molding Process Parameter Optimization of a Car Door Inner Panel	7
Retracted: Thermal Analysis of the Solar Dish Array Concentrator System	7
Large-Area Saline-Alkali-Tolerant Rice Growth Environment Monitoring System Based on LoRa+UAV	6
Investigation of Effective Parameters Ce and Zr in the Synthesis of H-ZSM-5 and SAPO-34 on the Production of Light Olefins from Naphtha	6
An Enhanced Drone Technology for Detecting the Human Object in the Dense Areas Using a Deep Learning Model	6
Retracted: Metal Cellulose Nanocomposites in Decorative Animation Character Modeling	6
Thermal Analysis of the Solar Dish Array Concentrator System	6
Design and Performance Evaluation of Dry-Mixed Cement Recycled Aggregate Pile	6
Effect of Recycled Aggregate Content on Water Permeability and Pore Structure of Pervious Concrete Pavement	6
The Impact of Family Sustainable Livelihood and Environmental Cognition on Herdsmen’s Choice of Production Behavior	6
Study on Road Performance and Electrothermal Performance of Poured Conductive Asphalt Concrete	6
Retracted: Economic Scheduling Problem of Nanomaterial Import and Export Trade Based on Redundant Data Compression Algorithm and Its Parameter Adjustment Method	6
Retracted: Research on the Innovation of Procurement Mode of Nanomaterials Based on E-Commerce	6
Retracted: Effects of the FR 4 Substrate Realized in a Circularly Polarized UHF-RFID Reader Antenna with Fractal Geometry for Enhancing Parameters	6
Numerical Simulation of Acoustic Emission Events in Supporting Roadways under Different Dynamic Loads	6
Predicting the Spread of Vessels in Initial Stage Cervical Cancer through Radiomics Strategy Based on Deep Learning Approach	6
Research on the Effect of Curing Temperature, Steel Fiber, and Admixture Content on Concrete Performance Based on Orthogonal Test in Cold Region	6
The Impact of the Development of Modern Biotechnology and Nanotechnology on the Swimming Sports Industry	6
Retracted: Experimental Investigation and Optimization on Friction Stir Welding of Nylon 6A Using Taguchi and ANOVA with Microstructural Analysis	6
Retracted: Based on the Application Practice of Multifunctional Nanomaterials in Art Design and Industrial Manufacturing Concept	6
Modification of Asphalt Concrete With Sulfur‐Containing Waste	6
Research on Shield Tunnelling Parameters Correlation in Composite Strata	6