Advances in Civil Engineering

Papers
(The TQCC of Advances in Civil Engineering is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)
ArticleCitations
Research on the Estimation Model of Energy Consumption Capacity for Reinforced Concrete Components with Axial Force35
Calculation Method for Bearing Capacity of Bottom‐Supported Anti‐Pull Piles in Layered Foundation32
Experimental Study of Macro‐ and Micro‐Scopic Damage in Red Sandstone under Dry and Wet Cycling29
Numerical Simulation of Artificial Recharge Groundwater Effect on Overlying Soft Clay Compression Control29
Effects of Different Ratios of Fly Ash and River Sand on Mechanical Properties of Cemented Paste Backfill Materials27
Cavity behind Special Segment Structures in Upward Shield Tunneling: A Numerical Approach25
Land Cover and Land Surface Temperature in the West Bank, Palestine23
Study on Acoustic Emission Characteristics and Damage Evolution Law of Shale under Uniaxial Compression23
Experimental and Numerical Investigation of One‐Dimensional Electroosmotic Consolidation Based on Segment Inheritance Strategy20
Improvement of the Nonlinear Damage Mathematical Model for Steel Components in Bridge Under Complex Stress19
Enhancing Understanding of Hydrologic Processes in the Shafe Watershed, Ethiopia18
Experimental Investigation on the Utilization of Marble and Scoria Powder as Partial Replacement of Cement in Concrete Production18
Research on Neural Network Prediction Model of Whole Process Risk Management Based on Building Information Model17
Numerical Simulation Study on Influence of a Structural Parameter of D Bolt, an Energy-Absorbing Rock Bolt, on its Stress Distribution17
Study on the Effect of Soil Type and Salinity on Water–Soil Characteristic Curves of Saline Soils Based on the Vapor Balance Technique16
The Effect of Granite Waste Powder as a Cement Substitute on the Mechanical Properties and Microstructure of Mortar15
NSF (Nylon Synthetic Fiber) Effectiveness in Stabilizing Weak Subgrade Soil: An Experimental Investigation15
Deformation Analysis of Deep Foundation Pits Based on Fluid–Structure Interaction15
Progressive Failure of Surrounding Rock in Underground Engineering and Size Effect of Numerical Simulation14
Theoretical Solutions for Forecasting the Response of the Existing Pipeline Induce by Tunneling underneath13
Study of the Roof Deformation Characteristics of Roadway Excavation Face and Unsupported Roof Distance13
Numerical Simulation of the Influence of Long‐Term Deformation of a Water‐Rich Goaf on Highway Stability: A Case Study in Jixi13
Multiobjective Optimization Method for Energy‐Saving Design of Green Buildings13
A Study on the Analysis of the Ground Compaction Effect According to the Roller Operation Method through CMV Analysis Using IC Rollers12
Machine Learning Approach on Automatic Classification of Tunnel Construction Worker’s Hazard Prediction Ability12
Numerical Analysis Study on the Influence of Shield Cutting Pile on the Settlement of Pile–Soil Composite Foundation12
Potential Use of Reclaimed Asphalt Pavement Aggregate and Waste Plastic Bottles for Sustainable Asphalt Pavement Production12
Joint Damage Effects on Axial Capacity of Cold‐Formed Steel Uprights: Experimental, Numerical, and Machine Learning Study12
Strengthening Characteristics of Bottom Expansion and Backfilling Anchoring in Fractured Surrounding Rock Roadways12
Microbial Deterioration Potential and Mitigation Strategies in Blended Cement Structures: A Review11
Numerical Simulation of Layered Compressible Soils’ Creep Deformation Under Monopile Foundation11
Investigation of Engineering Properties and Solidification Mechanism of Loess by Sodium Silicate Alkali‐Activated Coal Gangue Powder11
Strength and Microscopic Characteristics of Slag-Based Geopolymer-Solidified Sludge after Dry–Wet Cycling with Chloride Salt Solutions11
Behavior of Ball Penetrometer in Nonhomogeneous Clay in Centrifuge Test11
Thermal Stability Analysis and Novel Cooling Technology Field Tests for Permafrost Railway Subgrades11
Stability Analysis of High Slopes in Open‐Pit Mines Under Groundwater Seepage in a Tropical Rainforest Climate11
Study on Segmental Lining Behaviors of Shield Tunnel Induced by New Tunneling Underneath10
An Empirical Equation for Tunnel Squeezing Prediction in Weak Rock Masses10
Control of Concrete Segregation and Quality Enhancement Using Continuous Mixer Units10
Seismic Vulnerability Assessment of Reinforced Concrete Educational Buildings Using Machine Learning Algorithm10
Impact of Wet–Dry Cycles on the Durability and Degradation Mechanisms of Recycled Aggregate Concrete With Varying Replacement Percentages10
Derivation of Shape Functions for Nine‐Node Rectangular Element Based on Steady‐State Heat Conduction10
Soft Computing Solutions for Reducing the Carbon Footprint of Fly Ash Based Concrete10
Development of One‐Part Alkali‐Activated Mortar Using Foundry Waste Sand10
Comparison of Encased Stone Column with Conventional Column for Varied Parameters through Experimental and Numerical Investigations9
Research on the Seismic Performance of Prefabricated Bridge Piers Using UHPC Grout under an Eccentric Load9
Finite Element-Based Performance Analysis of Encased Composite Columns under Monotonic Axial Compression Load9
Experimental Study on Mechanical Properties of CFRP‐Confined Concrete Columns under Continuous Semi‐Submergence of Sulfate9
A Pathway to Corporate Social Responsibility: Contractors’ Major Moves in the Context of Post‐Disaster Reconstruction9
A Semantic Approach to Dynamic Path Planning for Fire Evacuation through BIM and IoT Data Integration9
A Scientometric Review Summarizing the Impact of Nanomaterials on the Fresh, Hardened, and Durability Properties of Cement‐Based Materials9
Enhancing Seismic Performance of Steel-Plated Stress-Ribbon Bridge with Tuned Mass Dampers: A Finite-Element Study9
Stability Analysis of a Water‐Rich Slope Under Seismic Disturbance9
Vehicle–Bridge Interaction Dynamic Analysis of Continuous Rigid Frame Composite Box Girder Bridge with Corrugated Steel Webs under Seismic Excitation9
Deep Learning–Based Automated Crack Detection for Post‐Earthquake Damage Assessment in Reinforced Concrete Structures9
Field-Scale Experimental Study on Thermomechanical Behaviors of Super-Long and Large-Diameter Energy Piles under Liquefied Natural Gas Tank9
Fluid Vibration Analysis of Large-Span Skeletal Membrane Structures under Pulsating Winds9
Experimental Study on Liquefaction Characteristics of Saturated Sand–Silt Mixtures9
Analysis of Settlement of Group Pile Foundation in Linear Viscoelastic Soil9
An Internal Stress Detection Technology of Concrete Based on Displacement Current8
Research on Flexural Properties and Flexural Toughness Evaluation Method of Steel Fiber Reinforced Cementitious Composites under Polar Low Temperatures8
Experiment Study on the Mechanical Behavior and Acoustic Emission Response of Thick and Hard Sandstone Roof in Xinjiang Mining Area8
The Effect of Wetfix and Nanohydrated Lime Additives on Bitumen Aging and the Cohesion and Adhesion Failure Mechanisms of Hot Asphalt Mixtures8
Prediction of the Mechanical Properties of Fibre-Reinforced Quarry Dust Concrete Using Response Surface and Artificial Neural Network Techniques8
Analysis of Soil Response during High‐Frequency Vibratory Steel Pipe Pile Driving in Soft Soil8
Influence of Support Parameter and Excavation Methods on Statistical Distribution Characteristics of Surrounding Rock Pressure in Shallow-Buried Metro Tunnel8
Influence of Mechanical and Microscopic Properties of Red Sandstone Modified by Different Solid Waste Materials8
Potential of Palm Oil Fuel Ash as a Partial Replacement of Fine Aggregates for Improved Fresh and Hardened Mortar Performance7
Design and Construction of Spatial Curved Structures Based on Concrete Additive Manufacturing: A Case Study of an Irregular Gatehouse7
Study on the Crack Propagation Behavior and Patterns of High‐Speed Railway Bridges Under High‐Speed Train Loading7
Identifying the Smoking and Smokeless Tobacco-Related Predictors on Frequencies of Heavy Vehicle Traffic Accidents in Bangladesh: Linear and Binary Logistic Regression-Based Approach7
Unsteady Aerodynamics of Bridge Decks in Transient Winds: Vortex Memory Effects and Path‐Dependent Responses7
Strength Improvement of Black Cotton Soil With Cement and Waste Glass Powder for Subgrade Stabilization7
Calculating Rock Joint Frequency in TBM Excavation Through Binocular Vision and Segmentation Techniques7
Review of Research on Reinforced Concrete Shell Structure Produced Using an Inflated Form7
Strength Recovery Effect of Bisphenol A Epoxy Resin E44 on Rock Masses with Various Crack Widths7
Retracted: Simulation of Migration Law of Organic Pollutants in Circulating Wells7
Research on the Mechanical Response of Adjacent Rings After Local Damage in Shield Tunnels7
Correlation Analysis and Prediction of the Physical and Mechanical Properties of Coastal Soft Soil in the Jiangdong New District, Haikou, China7
Performance of Diaphragm Walls during Ultra‐Deep Excavations in Karst Areas: Field Monitoring Analysis7
Stability Evaluation of the Goaf Based on Combination Weighting and Cloud Model7
Research on Dynamic Monitoring and Early Warning of the High-Rise Building Machine during the Climbing Stage7
Quantifying Schedule Delay Risk in Construction Projects: A Data-Driven Approach with BIM and Probabilistic Reliability Analysis7
Multilevel Seismic Damage Quantification for Inclined RC Piers: Integrating Fiber‐Based Simulation and Machine Learning Prediction7
Optimized Transverse–Longitudinal Hybrid Construction for Sustainable Design of Welded Steel Plate Girders7
Distribution Law of Abutment Pressure and Support Technology in the Roadway of Repeated Mining in the Fully Mechanized Top Coal Caving Mining Face7
Study on Impact of Foundation Pit Construction on Surrounding Tunnels Considering Its Shear Effect6
Research on Load Bearing and Deformation Behavior of “Pile–Wall” Retaining Structure6
Effects of FeNi3 Nanoparticles and Coal Slag on Mechanical and Durability Properties of Concrete against Acidic Environments6
Mechanical Property of Lateral Piles for Pile Composite Foundation Loaded by Model Test6
On the Responses of Braced Diaphragm Wall Supporting Deep Excavation Subjected to Asymmetric Surcharge Loads6
Conceptual Methods to Forecast Tunnel Distortion Resulting From the Overlying Foundation Pit Excavation and Dewatering6
Wood Beam Damage Identification Based on the Curvature Mode and Wavelet Transform6
Numerical Study on Optimization of Piled Raft Foundation on Stratified Soil under Static Load6
Random Forest–Based Coal Mine Roof Displacement Prediction and Application6
Influence of Asphalt Emulsion Stabilization on Pavement Structural Behavior and Life Cycle Assessment (LCA)6
Damage Identification of Full‐Scale Steel Truss Structure Based on Model Condensation and Mean‐Value Normalization Regularization Techniques6
Influence of Pore Water on Energy Dissipation of Concrete and Its Quantitative Calculation Method6
Simulation Analysis of the Effect of Pile Spacing on the Compressive Load-Bearing Performance of CEP Double Piles6
Real‐Time Parameters Back Analysis for High‐Fidelity Modeling of Wind Turbine Foundations6
A Two‐Stage Optimization Model for Multiple‐Crane Service Schedules Problem6
Study on the Division of the Affected Zone under Construction Unloading and Its Construction Sequence of the Multiline Parallel River-Crossing Pipe Jacking6
Effect of Activation Mode on the Use of Black Slag in Cementitious Materials for Ecological and Sustainable Construction6
Response and Damage Characteristics of Segmental Tunnel Lining under Various Dynamic Load Conditions6
Recycling Construction and Demolition Waste in the Sector of Construction6
Dynamic Response Analysis of Segmental Lining under Ground Shock: A Simplified Calculation Method6
Experimental Investigation on the Influence of Water Injection Timing on the Deformation of Loose Rock Blocks6
Evaluation of Rutting, Fatigue, and Moisture Resistance of Low-Energy Asphalt Mixtures Modified by Crumb Rubber6
Determination of Optimized Mix Design of Reactive Powder Concrete6
Study on Mechanical Behavior of Fully Encased Composite Slender Columns with High-Strength Concrete Using FEM Simulation6
Dynamic Simulation and Optimization of Synchronous Grouting for Shield Tunnels in Cavity‐Containing Strata6
Sustainable Soil Stabilization Approach Utilizing Rice Husk Ash and Hydrated Lime for Enhancing Poor Subgrade Soil in Arkansas6
Evaluating the Effectiveness of Safety Measures in Multistory Buildings: Evidence From Coastal Karnataka Region, India6
Insights into Wall-Jet Scouring Characterization with the Kinect Device: Benefits and Limitations6
Applicability and Cost Implication of Labor-Based Methods for Sustainable Road Maintenance (SRM) in Developing Countries6
Study on Thermo‐Mechanical Coupling Characteristics of Crack Initiation and Propagation at Precast–Cast‐in‐Place Concrete Interface of Bridges Under High Temperature6
A Numerical Study on the Seismic Vulnerability of RC Shear Walls With Different Opening Configurations6
Case Study on the Mutual Influence of Simultaneous Construction of Adjacent Deep Foundation Pit with Cover‐Excavation Reverse Method6
The Mechanical Properties of Reinforced Concrete Beam–Column Joints Under the High‐Temperature Effect of Fire5
Long‐Term Performance and Durability of Heat‐Treated Alkali‐Activated Slag Mortar Containing Silica Fume5
Effect of Grouting Pressure and Nozzle Diameter on the Diffusion Mechanism of Jet Grouting: A CFD–DEM Study5
Study on Creep Characteristics of Cemented Soil Under Long‐Term Immersion and Wet–Dry Cycling Conditions5
Potential of Saturated Coal Gasification Slag as the Fine Aggregate of Cement‐Based Materials5
Investigation on the Dynamic Behavior of Rock in Three Stages of Rock Fragmentation Under Vibro‐Impact Condition: Continuum and Discontinuum Model5
Water Sensitivity and Structural Properties of Loess5
Deformation Analysis of a New Subway Transfer Channel Closely Undercrossing an Existing Station5
Long-Term Effect Analysis of a High Slope with Tunnel Structure Based on Three-Dimensional Mesh Reconstruction5
Reinforcing Loops and Resistance: How Barriers to Circularity Sustain the Linear Economy in Construction Materials5
Critical Risk Factors of Stakeholder Collaboration Impacting BIM Implementation in High‐Rise Residential Building Projects Under the DBB System: A Delphi Survey5
A Wooden Pin Reinforcement of Ancient Chinese Wooden Temple: A Case of Daxiong Hall5
Laboratory Investigations on Mechanical Properties of High Temperature and Thermal Treatment (Rapid Cooling) Granite Under Unloading Confining Pressure5
Numerical Analysis of Rainfall‐Induced Landslides and Stability Assessment Along the Bonga‐Mizan Road Section, Ethiopia5
Exploring the Potential of Green Microalgae‐Based Phycoremediation Treated Wastewater for Sustainable Concrete Production5
Investigating the Mechanical and Microstructural Properties With Machine Learning Optimization of Recycled Eco‐Friendly PET Modified Concrete5
Study of the Instantaneous Water Level Measurement Method on Unsteady Flow Based on Single Camera and Fixed Scale Compensation in the Tunnel Model5
Machine Vision‐Based Deformation Monitoring and Validation for Ultra‐High Pylons of the Zhangjinggao Yangtze River Bridge5
Application Technology of Rapid Identification Method for Surrounding Rock Integrity of Complex Metamorphic Rock Mountain Tunnels5
Research on the Mechanism of Fault Activation and Water Inrush Across Variable Coal Pillar Widths5
MEVO‐Based Dynamic Safety Thresholds for Soft‐Soil Deep Excavations: Engineering Enhancements and Field Validation5
Experimental Analysis of Rainfall‐Induced Instability and Failure Patterns in Loess Fill Slopes5
Machine Learning-Based Prediction of Unconfined Compressive Strength of Sands Treated by Microbially-Induced Calcite Precipitation (MICP): A Gradient Boosting Approach and Correlation Analysis5
Effect of Multiple-Walled Carbon Nanotubes (MWCNTs) on Asphalt Binder Rheological Properties and Performance5
Performance Study of Intermittent Heating Mode Combining Air‐Source Heat Pump with Radiator in Hot Summer and Cold Winter Zones of China5
Newly Constructed Subway on Over‐Track Bridge Safety and Vibration Reduction Measure5
Quality Risk Evaluation of Urban Rail Transit Construction Based on AHP–FCE Method5
Effects of Ferrous Slag Composition on Properties of Carbonated Ferrous Slag–Calcium Carbide Slag Brick4
Numerical and Experimental Study on the Magnetic Logging Method for Detecting Lengths of Existing Piles4
Study on Mechanical Properties of Gold Mine Tailings Stabilized by Composite Alkali‐Activated Materials4
Mechanical Properties and Micromechanism of Calcium Sand–Cement Mortar Modified With Zirconium Dioxide and Basalt Fiber4
A Novel Method of Self-Healing Concrete to Improve Durability and Extend the Service Life of Civil Infrastructure4
Enhanced Flood Forecasting Using an Adaptive Ensemble Approach for Sustainable Water Management in the Kendrapara District, Odisha4
Modification of the Performance of Fresh and Hardened Concrete Reinforced With Fibers From Oil Palm Mesocarp4
Development of Optical Fiber Vector Sensor and Its Application in Straightness Monitoring of Scraper Conveyor4
A Novel Method for Deflection Calculation of Reinforced Concrete Stair Slabs considering Step Stiffness4
Bone Char Adsorption of COD and Colour from Tannery Wastewater: Breakthrough Curve Analysis and Fixed Bed Dynamic Modelling4
Novel Mangrove‐Guard Baffles for Rock Avalanche Protection: Numerical Analysis4
Experimental Study on Hybrid Stabilization of Subgrade Expansive Soils With Brewery Spent Grain Ash and Wheat Straw Fiber4
Mechanical Mode Analysis of Centrifugal Pump Impellers Based on Numerical Simulations4
Experimental Study and Numerical Analysis of the Mechanical Properties of Lifting Anchors Subjected to Combined Tensile and Shear Forces in Precast Concrete Components4
Analysis of Underground Cavern Surrounding Rock Stability and Anchoring Effects Under High Stress Using an Optimized DDARF Method4
Mechanical Performance Test and Plastic Design Method Exploration of Narrow Width Steel Box Composite Beams4
Geotechnical Behavior and Microstructural Analysis of Expansive Subgrade Soils Stabilized With Coffee Husk Ash4
Strength of Fiber Reinforced Modified Metakaolin‐Based Geopolymer Incorporating Crumbed Rubber and Mixed Plastic Waste Aggregate Under Sulfate Solution4
Research on the Development Trend and Graded Early Warning of Large Deformations in Soft Rock Tunnels: Microseismic and Deformation Monitoring4
Dam Breach Modeling and Downstream Flood Inundation Mapping Using HEC-RAS Model on the Proposed Gumara Dam, Ethiopia4
Bayesian Regularization Backpropagation Neural Network for Glass Beams in Lateral–Torsional Buckling4
Research on Settlement Prediction and Control of Lock Floor Concrete Pouring Construction4
Analysis on Mechanical Behavior of Relay Vertical Rotation for Steel Arch Tower4
Critical State-Based Mohr–Coulomb Bounding Surface Model for Sand under Monotonic Shearing4
Reliability Analysis of Compressive Fatigue Life of Cement Concrete under Temperature Differential Cycling4
Investigation on the Aerodynamic Parameters of the Triangle Shape of Tall Buildings by Using of CFD Method4
Use of Silica Fume, Bentonite, and Waste Tire Rubber as Impermeable Layer Construction Materials4
A Comparative Study of Seismic Performance Evaluation of Reinforced Concrete Frame Structures Using Chinese and African Seismic Codes4
Determining Optimum Maximum Superelevation for Highway Geometric Design Based on Side Friction Factor and Lateral Acceleration in Horizontal Curves4
A Simple Solution and Dilatancy Characterization for a Circular Tunnel Excavated in the Nonlinear Strain-Softening and Nonlinear Dilatancy Rock Mass4
Feasibility Study of Expanded Clay Aggregate Lightweight Concrete for Nonstructural Applications4
Study on the Measurement Method of Indoor Elevator Noise Under the Condition of Common Wall of Elevator Shaft and Residence4
Thermo–Hydromechanical Simulation of Fibre–Coal Gangue Stabilised Expansive Soils Under Freeze–Thaw Cycles Using COMSOL4
Influence of Water–Cement Ratio on Performance of Concrete Using Waste Concrete Aggregates4
Influences of Aluminum Ash Slag on Mechanical and Microstructural Characteristics of Stabilized/Solidified Heavy Metal Contaminated Soils4
Experimental and Numerical Investigation of Cyclic Grouting Compactness in Prestressed Tendon Ducts4
The Mechanism of Improving Roadbed Soil and Road Performance by New Composite Curing Liquid4
New Method for Designing and Assembling Segmental Cut‐and‐Cover Tunnel Lining in High‐Speed Railway Based on Cross‐Sectional Dimensions4
Firefly Algorithm-Based Artificial Neural Network to Predict the Shear Strength in FRP-Reinforced Concrete Beams4
Hydration of Early‐Age Composite Cement Paste Using Low‐Field Nuclear Magnetic Resonance4
Vibrational Response of Solid RC Slab System Under Synchronized Multiperson Walking Excitation4
A Study on the Thermal Performance of Hollow Glass Windows With Reflective Aluminum Louvers4
Hazards and Treatment of Collapsible Loess Foundation on Ultrahigh Voltage Transmission Lines4
Modeling the Compression Behavior of Dredged Sandy Clays Considering the Effect of Initial Water Contents and Sand Fractions4
Study on the Uniaxial Compression Failure Characteristics and Thermal Damage Constitutive Model of Concrete After Fire Exposure4
Landslide Susceptibility Mapping Using GIS and Bivariate Statistical Models in Chemoga Watershed, Ethiopia4
Comprehensive Evaluation of Transit‐Oriented Development (TOD) Guidance Systems: A Case Study of Shanghai TODs4
Study on Nanomaterials Coated Natural Coir Fibers as Crack Arrestor in Cement Composite4
Selection of Sustainable Building Material Using Multicriteria Decision-Making Model: A Case of Masonry Work in Lideta Subcity, Addis Ababa4
A Simultaneous Approach to Improve Progress Payments System Using a Common Data Environment4
Slope Stability Analysis of Mounded Storage Tank under Different Compaction Coefficients3
Two-Stage Caving Characteristics of Complex Irregular Goaf: A Case Study in China3
Comparative Experimental Study on Strength Properties of Red Clay Modified by Cement and Industrial Solid Waste Powder3
Study on Solidification Characteristics of Granular Coal Gangue: Fine Sand Paste-Cemented Filling Materials3
Wind Load Analysis on Temporary Scaffolding Structures in High‐Altitude Venues Based on Numerical Simulation: A Case Study From the 2022 Beijing Olympics3
Analytical Study on Longitudinal Dynamic Response of Long Tunnels Crossing Soil–Rock Stratum Under Rayleigh Wave Incidence3
Application of System Dynamics in Construction Engineering and Management: Content Analysis and Systematic Literature Review3
Machine Learning Modeling Integrating Experimental Analysis for Predicting Compressive Strength of Concrete Containing Different Industrial Byproducts3
Research on MultiStrategy Surrounding Rock Deformation Control of Double Gob‐Side Entry Retaining in Thick Coal Seam3
Post‐Fire Behavior of Modified SIFCON One‐Way Plates with Waste Tire Rubber under Flexural Load: Experimental and Numerical Study3
Research Investigates and Simulation Behavior of the Failure Characteristics of Red Mud–Loess Type Permeable Reactive Barriers PRB in Fixed‐Bed Column Experiments3
Early‐Age Water Resistance of Fiber‐Reinforced High Belite Sulphoaluminate Cement Mortar3
Unified Triple‐Shear Solution for Unsaturated Soil Pressure on Backfill Surface Inclination Under Rainfall Infiltration3
Development of a Systematic Inspection and Evaluation Method for the Bearing Capacity of Dry‐Hanging Stone Systems Based on Hardness Testing3
Prediction of Reservoir Bank Collapse Based on the Limit Equilibrium Theory3
Effects of SBS and Polyester Fiber on Performance Characteristics of Hot Recycled Asphalt Mixtures With High RAP Content3
Large Ring Test for Evaluation of Restrained Shrinkage Cracking: Calibration and Experimental Trial3
Sustainable Use of Gum Acacia as a Biopolymeric Additive in Ultra‐High Performance Concrete3
Research on Intelligent Detection and Segmentation of Rock Joints Based on Deep Learning3
Unveiling the Efficiency of the Moment Distribution Method: A Geometric Series Perspective3
Evaluating the Effect of Cement and ARG Fiber on the Mechanical and Microstructural Properties of Dune Sand3
Attenuation Relationships for the Horizontal Component of Peak Ground Acceleration (PGAH) Using Gene Expression Programing (GEP) and Group Method of Data Handling (GMDH)3
The Influence of Different Terrains on the Wind Pressure Distribution of Glass Curtain Wall in Airport Terminals in Mountainous Areas3
State‐of‐the‐Art Seismic Studies of Loess Tunnels in China3
Use of Madhuca longifolia (Mahua) Bark‐Derived Fibers for Enhancing the Performance of Cement Mortar and Concrete3
Nonlinear Behavior Study of Reinforced Concrete Coupling Beams Subjected to the Effect of Wind Loading3
Distribution Characteristics of Stress Sources and Surrounding Rock Structure Control Techniques of Gob‐Side Entry Driving in Extra‐Thick Coal Seam3
Optimization Analysis of Vibration Reduction for Large‐Span Steel Pedestrian Bridges Based on Tuned Mass Damper Inerter System3
Measurement of the Promoting Effect of Complex Conditions on the Adhesion Development in Curing Process of Cold Recycling Mixture with Emulsified Asphalt3
Numerical Analysis of the Cyclic Behavior of the Fully Connected Reinforced Concrete Shear Wall to Concrete‐Filled Tube Columns3
Mechanical Enhancement and Environmental Impact of Cement Concrete Pavements Through Lithium Feldspar Powder Incorporation: A Dose‐Dependent Microstructural Study3
Analysis of U-Shaped Steel Failure Characteristics in Rock Burst Roadway and Design of Stable Structure and Constant Resistance O-Shed3
Attenuation Law of Soil Shear Strength During Rainfall Infiltration in Over‐Wet Soil Embankments3
Theoretical Study of a Design Method for Underexcavation in Building Rectification3
Influence of Eggshell Ash and Stone Powder on Geotechnical Properties of Expansive Clay in Dukem Town3
Energy Evolution and Acoustic Emission Precursors for Coal–Rock Instability Under Uniaxial Compression3
Numerical Evaluation of Self‐Aeration in the Gelas Tunnel Intake: A Comparative Study Using VOF and Mixture Methods3
Effect of Incorporation of Mango Fibres on the Structural Properties of Concrete3
Investigation on the Potential of Bacteria‐Coated Jute Fiber for Enhancing Mechanical Properties and Self‐Healing Capabilities in Concrete3
Creating a Participatory Planning Approach Based on Swedish Visual Preferences for Building and Urban Design3
Performance Assessment of Existing Retrofitted Reinforced Concrete Buildings With Different Steel Bracing Systems3
Stability Improvement and Failure Mechanism Analysis of Calcareous Sand Slope Reinforced With Rubber Fibers3
An Analysis of Factors Influencing Accidents outside Urban Areas in Sistan and Baluchestan Province3
Acoustic Signal‐Based Deep Learning Approach and Device for Detecting Interfacial Voids in Steel–Concrete Composite Structures3
Micronumerical Simulation of Compression Failure and Size Effect in Lightweight Aggregate Concrete3
Extraction of Feature Information from Point Cloud of Large Volume Steel Truss Members3
Analysis of Ultimate Support Pressure for Deep Buried Shield Tunnel in Sand Soil3
Three‐Dimensional Dynamic Response of Multilayered Orthotropic Anisotropic Foundation Under Moving Loads3
Experimental Investigation on the Influence of Superplasticizer on Mechanical Behavior of Recycled Aggregate Concrete3
Enhanced Analytical Method for Evaluating the Existing Tunnel Response Caused by Tunneling Underlying3
Influence of Base Rock Deterioration on Tunnel Bottom Structure Damage under Train Excitation3
A Method of Selecting Project Delivery System with Pythagorean Fuzzy Set Group Decision-Making Method and Prospect Theory3
A New Method for Calculating Anchor Mesh Parameters Based on the Energy Absorption Mechanism of Helmet3
Multiscale Analysis of Mechanical Properties and Kinetic Processes in Dry Granular Flow3
Analysis of Wind Force Coefficients of Rooftop‐Mounted Photovoltaic Panels Using Wind Tunnel Tests and CFD Simulations3
0.18667602539062