Advances in Civil Engineering

Papers
(The median citation count of Advances in Civil Engineering is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Research on the Estimation Model of Energy Consumption Capacity for Reinforced Concrete Components with Axial Force30
Calculation Method for Bearing Capacity of Bottom‐Supported Anti‐Pull Piles in Layered Foundation24
Comparison of Encased Stone Column with Conventional Column for Varied Parameters through Experimental and Numerical Investigations23
Numerical Simulation of Artificial Recharge Groundwater Effect on Overlying Soft Clay Compression Control23
Development of One‐Part Alkali‐Activated Mortar Using Foundry Waste Sand22
Experimental Study of Macro‐ and Micro‐Scopic Damage in Red Sandstone under Dry and Wet Cycling21
Effects of Different Ratios of Fly Ash and River Sand on Mechanical Properties of Cemented Paste Backfill Materials20
Cavity behind Special Segment Structures in Upward Shield Tunneling: A Numerical Approach18
Investigation of Engineering Properties and Solidification Mechanism of Loess by Sodium Silicate Alkali‐Activated Coal Gangue Powder16
Study on Acoustic Emission Characteristics and Damage Evolution Law of Shale under Uniaxial Compression16
Land Cover and Land Surface Temperature in the West Bank, Palestine16
Improvement of the Nonlinear Damage Mathematical Model for Steel Components in Bridge Under Complex Stress15
Deep Learning–Based Automated Crack Detection for Post‐Earthquake Damage Assessment in Reinforced Concrete Structures15
Numerical Simulation Study on Influence of a Structural Parameter of D Bolt, an Energy-Absorbing Rock Bolt, on its Stress Distribution14
Control of Concrete Segregation and Quality Enhancement Using Continuous Mixer Units14
Seismic Vulnerability Assessment of Reinforced Concrete Educational Buildings Using Machine Learning Algorithm14
NSF (Nylon Synthetic Fiber) Effectiveness in Stabilizing Weak Subgrade Soil: An Experimental Investigation13
Multiobjective Optimization Method for Energy‐Saving Design of Green Buildings13
Deformation Analysis of Deep Foundation Pits Based on Fluid–Structure Interaction12
Progressive Failure of Surrounding Rock in Underground Engineering and Size Effect of Numerical Simulation12
Numerical Simulation of the Influence of Long‐Term Deformation of a Water‐Rich Goaf on Highway Stability: A Case Study in Jixi11
Experimental Investigation on the Utilization of Marble and Scoria Powder as Partial Replacement of Cement in Concrete Production11
Study of the Roof Deformation Characteristics of Roadway Excavation Face and Unsupported Roof Distance11
Joint Damage Effects on Axial Capacity of Cold‐Formed Steel Uprights: Experimental, Numerical, and Machine Learning Study11
A Scientometric Review Summarizing the Impact of Nanomaterials on the Fresh, Hardened, and Durability Properties of Cement‐Based Materials11
Theoretical Solutions for Forecasting the Response of the Existing Pipeline Induce by Tunneling underneath11
Enhancing Understanding of Hydrologic Processes in the Shafe Watershed, Ethiopia11
Numerical Analysis Study on the Influence of Shield Cutting Pile on the Settlement of Pile–Soil Composite Foundation11
A Semantic Approach to Dynamic Path Planning for Fire Evacuation through BIM and IoT Data Integration10
Experimental and Numerical Investigation of One‐Dimensional Electroosmotic Consolidation Based on Segment Inheritance Strategy10
Strength and Microscopic Characteristics of Slag-Based Geopolymer-Solidified Sludge after Dry–Wet Cycling with Chloride Salt Solutions10
Potential Use of Reclaimed Asphalt Pavement Aggregate and Waste Plastic Bottles for Sustainable Asphalt Pavement Production9
A Study on the Analysis of the Ground Compaction Effect According to the Roller Operation Method through CMV Analysis Using IC Rollers9
Impact of Wet–Dry Cycles on the Durability and Degradation Mechanisms of Recycled Aggregate Concrete With Varying Replacement Percentages9
Research on Neural Network Prediction Model of Whole Process Risk Management Based on Building Information Model9
Behavior of Ball Penetrometer in Nonhomogeneous Clay in Centrifuge Test9
Numerical Simulation of Layered Compressible Soils’ Creep Deformation Under Monopile Foundation9
Study on the Effect of Soil Type and Salinity on Water–Soil Characteristic Curves of Saline Soils Based on the Vapor Balance Technique9
The Effect of Granite Waste Powder as a Cement Substitute on the Mechanical Properties and Microstructure of Mortar9
An Empirical Equation for Tunnel Squeezing Prediction in Weak Rock Masses9
Stability Analysis of High Slopes in Open‐Pit Mines Under Groundwater Seepage in a Tropical Rainforest Climate9
Soft Computing Solutions for Reducing the Carbon Footprint of Fly Ash Based Concrete8
Fluid Vibration Analysis of Large-Span Skeletal Membrane Structures under Pulsating Winds8
Analysis of Settlement of Group Pile Foundation in Linear Viscoelastic Soil8
Vehicle–Bridge Interaction Dynamic Analysis of Continuous Rigid Frame Composite Box Girder Bridge with Corrugated Steel Webs under Seismic Excitation8
Field-Scale Experimental Study on Thermomechanical Behaviors of Super-Long and Large-Diameter Energy Piles under Liquefied Natural Gas Tank8
Identifying the Smoking and Smokeless Tobacco-Related Predictors on Frequencies of Heavy Vehicle Traffic Accidents in Bangladesh: Linear and Binary Logistic Regression-Based Approach8
Design and Construction of Spatial Curved Structures Based on Concrete Additive Manufacturing: A Case Study of an Irregular Gatehouse8
Experimental Study on Mechanical Properties of CFRP‐Confined Concrete Columns under Continuous Semi‐Submergence of Sulfate8
Derivation of Shape Functions for Nine‐Node Rectangular Element Based on Steady‐State Heat Conduction8
Research on the Seismic Performance of Prefabricated Bridge Piers Using UHPC Grout under an Eccentric Load8
Enhancing Seismic Performance of Steel-Plated Stress-Ribbon Bridge with Tuned Mass Dampers: A Finite-Element Study8
Review of Research on Reinforced Concrete Shell Structure Produced Using an Inflated Form8
Stability Analysis of a Water‐Rich Slope Under Seismic Disturbance7
Correlation Analysis and Prediction of the Physical and Mechanical Properties of Coastal Soft Soil in the Jiangdong New District, Haikou, China7
Influence of Mechanical and Microscopic Properties of Red Sandstone Modified by Different Solid Waste Materials7
Study on the Crack Propagation Behavior and Patterns of High‐Speed Railway Bridges Under High‐Speed Train Loading7
Distribution Law of Abutment Pressure and Support Technology in the Roadway of Repeated Mining in the Fully Mechanized Top Coal Caving Mining Face7
A Pathway to Corporate Social Responsibility: Contractors’ Major Moves in the Context of Post‐Disaster Reconstruction7
Experiment Study on the Mechanical Behavior and Acoustic Emission Response of Thick and Hard Sandstone Roof in Xinjiang Mining Area7
Performance of Diaphragm Walls during Ultra‐Deep Excavations in Karst Areas: Field Monitoring Analysis7
Study on Mechanical Behavior of Fully Encased Composite Slender Columns with High-Strength Concrete Using FEM Simulation7
Finite Element-Based Performance Analysis of Encased Composite Columns under Monotonic Axial Compression Load7
Experimental Study on Liquefaction Characteristics of Saturated Sand–Silt Mixtures6
Retracted: Simulation of Migration Law of Organic Pollutants in Circulating Wells6
An Internal Stress Detection Technology of Concrete Based on Displacement Current6
Strength Recovery Effect of Bisphenol A Epoxy Resin E44 on Rock Masses with Various Crack Widths6
Strength Improvement of Black Cotton Soil With Cement and Waste Glass Powder for Subgrade Stabilization6
Sustainable Soil Stabilization Approach Utilizing Rice Husk Ash and Hydrated Lime for Enhancing Poor Subgrade Soil in Arkansas6
A Numerical Study on the Seismic Vulnerability of RC Shear Walls With Different Opening Configurations6
Case Study on the Mutual Influence of Simultaneous Construction of Adjacent Deep Foundation Pit with Cover‐Excavation Reverse Method6
Quantifying Schedule Delay Risk in Construction Projects: A Data-Driven Approach with BIM and Probabilistic Reliability Analysis6
Numerical Study on Optimization of Piled Raft Foundation on Stratified Soil under Static Load6
Research on the Mechanical Response of Adjacent Rings After Local Damage in Shield Tunnels6
Research on Dynamic Monitoring and Early Warning of the High-Rise Building Machine during the Climbing Stage6
The Effect of Wetfix and Nanohydrated Lime Additives on Bitumen Aging and the Cohesion and Adhesion Failure Mechanisms of Hot Asphalt Mixtures6
Analysis of Soil Response during High‐Frequency Vibratory Steel Pipe Pile Driving in Soft Soil6
Potential of Palm Oil Fuel Ash as a Partial Replacement of Fine Aggregates for Improved Fresh and Hardened Mortar Performance6
Stability Evaluation of the Goaf Based on Combination Weighting and Cloud Model6
A Two‐Stage Optimization Model for Multiple‐Crane Service Schedules Problem6
On the Responses of Braced Diaphragm Wall Supporting Deep Excavation Subjected to Asymmetric Surcharge Loads6
Mechanical Property of Lateral Piles for Pile Composite Foundation Loaded by Model Test6
Multilevel Seismic Damage Quantification for Inclined RC Piers: Integrating Fiber‐Based Simulation and Machine Learning Prediction6
Experimental Investigation on the Influence of Water Injection Timing on the Deformation of Loose Rock Blocks6
Calculating Rock Joint Frequency in TBM Excavation Through Binocular Vision and Segmentation Techniques6
Influence of Support Parameter and Excavation Methods on Statistical Distribution Characteristics of Surrounding Rock Pressure in Shallow-Buried Metro Tunnel6
Unsteady Aerodynamics of Bridge Decks in Transient Winds: Vortex Memory Effects and Path‐Dependent Responses6
Optimized Transverse–Longitudinal Hybrid Construction for Sustainable Design of Welded Steel Plate Girders6
Research on Flexural Properties and Flexural Toughness Evaluation Method of Steel Fiber Reinforced Cementitious Composites under Polar Low Temperatures6
Damage Identification of Full‐Scale Steel Truss Structure Based on Model Condensation and Mean‐Value Normalization Regularization Techniques6
Random Forest–Based Coal Mine Roof Displacement Prediction and Application6
Effects of FeNi3 Nanoparticles and Coal Slag on Mechanical and Durability Properties of Concrete against Acidic Environments6
Evaluation of Rutting, Fatigue, and Moisture Resistance of Low-Energy Asphalt Mixtures Modified by Crumb Rubber6
Study on the Division of the Affected Zone under Construction Unloading and Its Construction Sequence of the Multiline Parallel River-Crossing Pipe Jacking6
Simulation Analysis of the Effect of Pile Spacing on the Compressive Load-Bearing Performance of CEP Double Piles6
Prediction of the Mechanical Properties of Fibre-Reinforced Quarry Dust Concrete Using Response Surface and Artificial Neural Network Techniques6
Applicability and Cost Implication of Labor-Based Methods for Sustainable Road Maintenance (SRM) in Developing Countries5
Long‐Term Performance and Durability of Heat‐Treated Alkali‐Activated Slag Mortar Containing Silica Fume5
Study on Impact of Foundation Pit Construction on Surrounding Tunnels Considering Its Shear Effect5
Study on Creep Characteristics of Cemented Soil Under Long‐Term Immersion and Wet–Dry Cycling Conditions5
Experimental Analysis of Rainfall‐Induced Instability and Failure Patterns in Loess Fill Slopes5
Machine Learning-Based Prediction of Unconfined Compressive Strength of Sands Treated by Microbially-Induced Calcite Precipitation (MICP): A Gradient Boosting Approach and Correlation Analysis5
Wood Beam Damage Identification Based on the Curvature Mode and Wavelet Transform5
Dynamic Response Analysis of Segmental Lining under Ground Shock: A Simplified Calculation Method5
Recycling Construction and Demolition Waste in the Sector of Construction5
Determination of Optimized Mix Design of Reactive Powder Concrete5
Laboratory Investigations on Mechanical Properties of High Temperature and Thermal Treatment (Rapid Cooling) Granite Under Unloading Confining Pressure5
Quality Risk Evaluation of Urban Rail Transit Construction Based on AHP–FCE Method5
Investigating the Mechanical and Microstructural Properties With Machine Learning Optimization of Recycled Eco‐Friendly PET Modified Concrete5
Insights into Wall-Jet Scouring Characterization with the Kinect Device: Benefits and Limitations5
Research on Load Bearing and Deformation Behavior of “Pile–Wall” Retaining Structure5
Influence of Pore Water on Energy Dissipation of Concrete and Its Quantitative Calculation Method5
Response and Damage Characteristics of Segmental Tunnel Lining under Various Dynamic Load Conditions5
Potential of Saturated Coal Gasification Slag as the Fine Aggregate of Cement‐Based Materials5
Research on the Mechanism of Fault Activation and Water Inrush Across Variable Coal Pillar Widths5
Investigation on the Dynamic Behavior of Rock in Three Stages of Rock Fragmentation Under Vibro‐Impact Condition: Continuum and Discontinuum Model5
Vibrational Response of Solid RC Slab System Under Synchronized Multiperson Walking Excitation4
Hydration of Early‐Age Composite Cement Paste Using Low‐Field Nuclear Magnetic Resonance4
Novel Mangrove‐Guard Baffles for Rock Avalanche Protection: Numerical Analysis4
Long-Term Effect Analysis of a High Slope with Tunnel Structure Based on Three-Dimensional Mesh Reconstruction4
Study on Mechanical Properties of Gold Mine Tailings Stabilized by Composite Alkali‐Activated Materials4
Newly Constructed Subway on Over‐Track Bridge Safety and Vibration Reduction Measure4
Exploring the Potential of Green Microalgae‐Based Phycoremediation Treated Wastewater for Sustainable Concrete Production4
Effect of Grouting Pressure and Nozzle Diameter on the Diffusion Mechanism of Jet Grouting: A CFD–DEM Study4
The Mechanical Properties of Reinforced Concrete Beam–Column Joints Under the High‐Temperature Effect of Fire4
Use of Silica Fume, Bentonite, and Waste Tire Rubber as Impermeable Layer Construction Materials4
Analysis on Mechanical Behavior of Relay Vertical Rotation for Steel Arch Tower4
Feasibility Study of Expanded Clay Aggregate Lightweight Concrete for Nonstructural Applications4
Research on the Development Trend and Graded Early Warning of Large Deformations in Soft Rock Tunnels: Microseismic and Deformation Monitoring4
Mechanical Mode Analysis of Centrifugal Pump Impellers Based on Numerical Simulations4
Bayesian Regularization Backpropagation Neural Network for Glass Beams in Lateral–Torsional Buckling4
Comprehensive Evaluation of Transit‐Oriented Development (TOD) Guidance Systems: A Case Study of Shanghai TODs4
Deformation Analysis of a New Subway Transfer Channel Closely Undercrossing an Existing Station4
MEVO‐Based Dynamic Safety Thresholds for Soft‐Soil Deep Excavations: Engineering Enhancements and Field Validation4
Water Sensitivity and Structural Properties of Loess4
Effect of Multiple-Walled Carbon Nanotubes (MWCNTs) on Asphalt Binder Rheological Properties and Performance4
Selection of Sustainable Building Material Using Multicriteria Decision-Making Model: A Case of Masonry Work in Lideta Subcity, Addis Ababa4
Experimental and Numerical Investigation of Cyclic Grouting Compactness in Prestressed Tendon Ducts4
Performance Study of Intermittent Heating Mode Combining Air‐Source Heat Pump with Radiator in Hot Summer and Cold Winter Zones of China4
Thermo–Hydromechanical Simulation of Fibre–Coal Gangue Stabilised Expansive Soils Under Freeze–Thaw Cycles Using COMSOL4
Study on the Uniaxial Compression Failure Characteristics and Thermal Damage Constitutive Model of Concrete After Fire Exposure4
Study of the Instantaneous Water Level Measurement Method on Unsteady Flow Based on Single Camera and Fixed Scale Compensation in the Tunnel Model4
Determining Optimum Maximum Superelevation for Highway Geometric Design Based on Side Friction Factor and Lateral Acceleration in Horizontal Curves4
Influences of Aluminum Ash Slag on Mechanical and Microstructural Characteristics of Stabilized/Solidified Heavy Metal Contaminated Soils4
New Method for Designing and Assembling Segmental Cut‐and‐Cover Tunnel Lining in High‐Speed Railway Based on Cross‐Sectional Dimensions4
Firefly Algorithm-Based Artificial Neural Network to Predict the Shear Strength in FRP-Reinforced Concrete Beams4
A Wooden Pin Reinforcement of Ancient Chinese Wooden Temple: A Case of Daxiong Hall4
Critical Risk Factors of Stakeholder Collaboration Impacting BIM Implementation in High‐Rise Residential Building Projects Under the DBB System: A Delphi Survey4
A Novel Method of Self-Healing Concrete to Improve Durability and Extend the Service Life of Civil Infrastructure4
Research on Settlement Prediction and Control of Lock Floor Concrete Pouring Construction4
Mechanical Properties and Micromechanism of Calcium Sand–Cement Mortar Modified With Zirconium Dioxide and Basalt Fiber4
Critical State-Based Mohr–Coulomb Bounding Surface Model for Sand under Monotonic Shearing4
Geotechnical Behavior and Microstructural Analysis of Expansive Subgrade Soils Stabilized With Coffee Husk Ash4
Numerical Evaluation of Self‐Aeration in the Gelas Tunnel Intake: A Comparative Study Using VOF and Mixture Methods3
Development of Optical Fiber Vector Sensor and Its Application in Straightness Monitoring of Scraper Conveyor3
Study on Solidification Characteristics of Granular Coal Gangue: Fine Sand Paste-Cemented Filling Materials3
Forward Modeling and Model Test of Ground-Penetrating Radar toward Typical Asphalt Pavement Distresses3
State‐of‐the‐Art Seismic Studies of Loess Tunnels in China3
A Damage Detection Approach in the Era of Industry 4.0 Using the Relationship between Circular Economy, Data Mining, and Artificial Intelligence3
Experimental Study on the Vibration Characteristics of Dangerous Rock Mass under Constant Micromotion3
Experimental Investigation on the Influence of Superplasticizer on Mechanical Behavior of Recycled Aggregate Concrete3
Compression Mechanical Properties and Constitutive Model for Soft–Hard Interlayered Rock Mass3
Three‐Dimensional Dynamic Response of Multilayered Orthotropic Anisotropic Foundation Under Moving Loads3
Hazards and Treatment of Collapsible Loess Foundation on Ultrahigh Voltage Transmission Lines3
Acoustic Signal‐Based Deep Learning Approach and Device for Detecting Interfacial Voids in Steel–Concrete Composite Structures3
A Simple Solution and Dilatancy Characterization for a Circular Tunnel Excavated in the Nonlinear Strain-Softening and Nonlinear Dilatancy Rock Mass3
Distribution Characteristics of Stress Sources and Surrounding Rock Structure Control Techniques of Gob‐Side Entry Driving in Extra‐Thick Coal Seam3
A Comparative Study of Seismic Performance Evaluation of Reinforced Concrete Frame Structures Using Chinese and African Seismic Codes3
Mechanical Analysis of Junction Pier of Fuzhou-Xiamen High-Speed Railway Rigid-Frame Bridge3
Influence of Water–Cement Ratio on Performance of Concrete Using Waste Concrete Aggregates3
Optimization Analysis of Vibration Reduction for Large‐Span Steel Pedestrian Bridges Based on Tuned Mass Damper Inerter System3
Investigation on the Aerodynamic Parameters of the Triangle Shape of Tall Buildings by Using of CFD Method3
Fully Coupled Numerical Analysis of Seismic Behavior of a Shield Tunnel Embedded in Nonuniform Liquefiable Soils3
A Study on the Thermal Performance of Hollow Glass Windows With Reflective Aluminum Louvers3
Performance Assessment of Existing Retrofitted Reinforced Concrete Buildings With Different Steel Bracing Systems3
Field Experiments of Rainfall‐Induced Weathered Granite Residual Soil Shallow Landslides3
Mechanical Performance Test and Plastic Design Method Exploration of Narrow Width Steel Box Composite Beams3
Decision‐Making Evaluation and Optimization Strategies for Construction EPC Project Developers Utilizing BIM Technology3
Slope Stability Analysis of Mounded Storage Tank under Different Compaction Coefficients3
Study on Strength and Micromorphology of Expansive Soil Improved by Cement–Coal Gangue under Dry–Wet Cycle3
The Research on Obtaining the Geometric Dimension of Cable-Stayed Bridges Based on 3D Laser Scanning3
Unified Triple‐Shear Solution for Unsaturated Soil Pressure on Backfill Surface Inclination Under Rainfall Infiltration3
Wind Load Analysis on Temporary Scaffolding Structures in High‐Altitude Venues Based on Numerical Simulation: A Case Study From the 2022 Beijing Olympics3
A Method of Selecting Project Delivery System with Pythagorean Fuzzy Set Group Decision-Making Method and Prospect Theory3
Application of Metaheuristic Algorithms and ANN Model for Univariate Water Level Forecasting3
Evaluating the Effect of Cement and ARG Fiber on the Mechanical and Microstructural Properties of Dune Sand3
A Novel Hybrid Deep Learning Model for Complex Systems: A Case of Train Delay Prediction3
Early‐Age Water Resistance of Fiber‐Reinforced High Belite Sulphoaluminate Cement Mortar3
Analysis of Ultimate Support Pressure for Deep Buried Shield Tunnel in Sand Soil3
Enhanced Analytical Method for Evaluating the Existing Tunnel Response Caused by Tunneling Underlying3
Modeling the Compression Behavior of Dredged Sandy Clays Considering the Effect of Initial Water Contents and Sand Fractions3
Improvement of Composite Beam with Web Opening Using Posttensioning Tendons under Static and Cyclic Loadings3
Numerical and Experimental Study on the Magnetic Logging Method for Detecting Lengths of Existing Piles3
Settlement Prediction Method of Extra-Large Diameter Tunnels in Soft Rock Strata3
A Simultaneous Approach to Improve Progress Payments System Using a Common Data Environment3
Research on MultiStrategy Surrounding Rock Deformation Control of Double Gob‐Side Entry Retaining in Thick Coal Seam3
Experimental Study and Numerical Analysis of the Mechanical Properties of Lifting Anchors Subjected to Combined Tensile and Shear Forces in Precast Concrete Components3
Modeling Landslide Susceptibility and Risk Assessment Using GIS–Based AHP and WoE Methods: A Case Study of Maze and Zenti Catchments, Southern Ethiopia3
Modification of the Performance of Fresh and Hardened Concrete Reinforced With Fibers From Oil Palm Mesocarp3
Comparative Experimental Study on Strength Properties of Red Clay Modified by Cement and Industrial Solid Waste Powder3
Mechanical Performance Investigation of a Flat‐Roof and Four‐Slope Folded Plate Structure3
Landslide Susceptibility Mapping Using GIS and Bivariate Statistical Models in Chemoga Watershed, Ethiopia3
Synthesis of Sustainable OPC‐Blended Geopolymer Concrete: Experimental and Modeling Study3
Numerical Analysis of the Cyclic Behavior of the Fully Connected Reinforced Concrete Shear Wall to Concrete‐Filled Tube Columns3
Unveiling the Efficiency of the Moment Distribution Method: A Geometric Series Perspective3
Attenuation Law of Soil Shear Strength During Rainfall Infiltration in Over‐Wet Soil Embankments3
An Analysis of Factors Influencing Accidents outside Urban Areas in Sistan and Baluchestan Province3
Research Investigates and Simulation Behavior of the Failure Characteristics of Red Mud–Loess Type Permeable Reactive Barriers PRB in Fixed‐Bed Column Experiments3
Settlement Prediction Based on the Relationship between the Empirical and Analytical Solutions of a Cylindrical Cavity under Undrained Conditions3
Machine Learning Modeling Integrating Experimental Analysis for Predicting Compressive Strength of Concrete Containing Different Industrial Byproducts3
Reliability Analysis of Compressive Fatigue Life of Cement Concrete under Temperature Differential Cycling3
Mechanical Enhancement and Environmental Impact of Cement Concrete Pavements Through Lithium Feldspar Powder Incorporation: A Dose‐Dependent Microstructural Study3
Effects of SBS and Polyester Fiber on Performance Characteristics of Hot Recycled Asphalt Mixtures With High RAP Content3
A Novel Method for Deflection Calculation of Reinforced Concrete Stair Slabs considering Step Stiffness3
Application of System Dynamics in Construction Engineering and Management: Content Analysis and Systematic Literature Review3
Dam Breach Modeling and Downstream Flood Inundation Mapping Using HEC-RAS Model on the Proposed Gumara Dam, Ethiopia3
Influence of Eggshell Ash and Stone Powder on Geotechnical Properties of Expansive Clay in Dukem Town3
Study on the Measurement Method of Indoor Elevator Noise Under the Condition of Common Wall of Elevator Shaft and Residence3
Investigation on the Potential of Bacteria‐Coated Jute Fiber for Enhancing Mechanical Properties and Self‐Healing Capabilities in Concrete3
The Mechanism of Improving Roadbed Soil and Road Performance by New Composite Curing Liquid3
Field Test and Numerical Simulation of Squeezing Effect of Large‐Diameter Pipe Piles3
Bone Char Adsorption of COD and Colour from Tannery Wastewater: Breakthrough Curve Analysis and Fixed Bed Dynamic Modelling3
Attenuation Relationships for the Horizontal Component of Peak Ground Acceleration (PGAH) Using Gene Expression Programing (GEP) and Group Method of Data Handling (GMDH)3
Nonlinear Behavior Study of Reinforced Concrete Coupling Beams Subjected to the Effect of Wind Loading3
Study on Nanomaterials Coated Natural Coir Fibers as Crack Arrestor in Cement Composite3
Leveraging Silica Fume as a Sustainable Supplementary Cementitious Material for Enhanced Durability and Decarbonization in Concrete3
Study on the Seepage Mechanism of Rainwater on Granite Residual Soil Cut Slopes2
On Asymmetric Failure Characteristics of Tunnels and Surrounding Rock Control Techniques Under Close‐Distance Repeated Coal Mining2
A Hybrid Random Forest and Least Squares Support Vector Machine Model Based on Particle Swarm Optimization Algorithm for Slope Stability Prediction: A Case Study in Sichuan–Tibet Highway, China2
Research on the Coupled Relationship of Factors Influencing Construction Workers’ Unsafe Behaviors: A Hybrid DEMATEL-ISM-MICMAC Approach2
Comparative Analysis of Shear Strength Prediction Models for Reinforced Concrete Slab–Column Connections2
An Integrated UAV and Deep Learning Framework With HSB‐Based Segmentation for Automated Slope Anomaly Detection in Mountainous Soil and Water Conservation Sites2
Mechanical Behavior of a Deep‐Buried Soft Soil Conveyance Tunnel Crossing Soft‐Hard Soil Layers Under High‐Pressure Water Conditions2
Intelligent GPR Detection of Backfill Grouting Quality and Adjacent Soil Cavities in Shield Tunnels: A Case Study2
Study on Mechanical Model for Postpeak Shear Behavior of Rock Joints Based on Degradation Characteristics of the 3D Morphology2
Comparative Study of Swelling Pressure in Expansive Soils considering Different Initial Water Contents and BOFS Stabilization2
Effects of Cement Treatment on Water Retention Behavior and Collapse Potential of Gypseous Soils: Experimental Investigation and Prediction Models2
Retracted: Experimental Study on Mineral Solid Waste Green Grouting Material Based on Electromagnetic Characteristic Detection2
Predictive Analysis of Stover–Waste‐Steel‐Fiber Concrete Damage in a Freeze–Thaw Environment2
A CPTU‐Based Prediction Method for Undrained Shear Strength With Quantified Uncertainty2
Flexural Behavior and Design Calculation Method of Joints With Bar Details Connecting T‐Shaped Beam2
Experimental Study on Expansive Subgrade Clay Soils Stabilized With Sugarcane Bagasse Ash and Nonwoven Geotextile2
Novel Unsupervised Machine Learning Method for Identifying Falling from Height Hazards in Building Information Models through Path Simulation Sampling2
Response Characteristics of Tunnels with Curvilinear Axes under Obliquely Incident Lateral SV Seismic Waves2
Combined Earthquake‐Wave Effects on the Dynamic Response of Long‐Span Cable‐Stayed Bridges2
Effect of Bacillus amyloliquefaciens Bacteria–Coated Jute Fiber on Workability, Durability, and Microstructural Properties of Concrete2
Durability and Cracking Defects in 3D‐Printed Concrete2
A Comprehensive Review of Life Cycle Cost Assessment of Recycled Materials in Asphalt Pavements Rehabilitation2
Development and Application of Graphene EPS Technology in Assembled Thermal Insulation Structural System: A Case Study of China’s Severe Cold Regions2
Dynamic Characteristics and Lateral‐Torsional Vibration Response of SRC Frame With Special‐Shaped Columns2
0.1503050327301