Particuology

Article	Citations
Parameter identification in the bismuth homogeneous nucleation model for population balance	274
Numerical study and experimental validation of copper powder plasma spheroidization process	185
Facile interfacial synthesis of gold micronails with adjustable length and roughness and their superior SERS properties for the detection of p-aminothiophenol	159
Permeable and robust polymer-silica hybrid armor on cell catalyst for sustainable biomanufacturing	138
Impact of pressure on gas-solid hydrodynamics of Geldart B and D particles in a pressurized bubbling fluidized bed: A CFD-DEM study	109
Development, verification and application of a versatile aerosol calibration system for online aerosol instruments	103
Measuring permeability and flowability of powders at various packing fractions	99
Waste to treasure: Reutilization of fluid catalytic cracking coke block as photothermal conversion material for water evaporation	82
Fluidization of wet cohesive powder in virtual Couette rheometer	77
Controlled dispersion and velocity evolution of explosion-driven submillimeter particle groups: An experimental and numerical simulation study	67
Wall-scaling prevention in cryogenic external cooler of ammonium chloride solution by liquid-solid fluidization	65
Systematic numerical study of cuttings transport using drilling fluids modified with single-walled carbon nanotubes	63
Synergistic precipitant powered self-assembly of papain for cross-linked enzyme crystals preparation	57
Editorial Board	55
Experimental and numerical study of maximum efficiency vortex finder insertion depth of a Stairmand cyclone	54
Acoustic emission and machine learning algorithms for particle size analysis in gas-solid fluidized bed reactors	54
Si-induced insertion of Li into SiC to form Li-rich SiC twin crystal	54
Significant effects of transport on nanoparticles during new particle formation events in the atmosphere of Beijing	53
A micro-investigation on water bridge effects for unsaturated granular materials with constant water content by discrete element method	53
Polarized imaging dynamic light scattering for simultaneous measurement of nanoparticle size and morphology	52
Multiphysics of multifunctional nanofluids based on different oxides nanoparticles and glycerol fluid	50
Preparation of calcium carbonate with microstructure and nanostructure from carbide slag for CO2 sequestration by using recyclable ammonium chloride	50
Investigating rotational characteristics and contact mechanisms of star-like shapes using multiellipse-based DEM	49
Considering solid shear stress in MP-PIC simulation of a CFB riser	49
A refined representation method of the particle size distribution curve based on grading entropy	47

Editorial Board	47
Artificial oxygen carriers, from nanometer- to micrometer-sized particles, made of hemoglobin composites substituting for red blood cells	47
Zr-doped titanium lithium ion sieve and EP-granulated composite: Superb adsorption and recycling performance	47
Investigating the inflow into a granular bed using a locally resolved method	47
Heat transfer analysis in particle-laden flows using the immersed boundary method	47
Quantify the edge effect of HPGR mills with DEM modelling	46
Editorial Board	45
Advanced heat flux modeling in coarse-grained CFD-DEM simulations	44
CFD-DEM modeling of fluid-driven fracture induced by temperature-dependent polymer injection	43
Correlation mechanism of friction behavior and topological properties of the contact network during powder compaction	43
CeO2 nanoparticles-decorated CoP nanocubes for accelerating alkaline electrocatalytic oxygen evolution reaction	43
Investigation of particle motion in a rotatory flow field exposed to a forced vortex condition	42
Study on the force chain characteristics with coal dust layer and the three-body contact stiffness	42
Exploring the therapeutic potential of microwave-assisted biosynthesized silver nanoparticles using Erica manipuliflora Salisb.: A comprehensive study on anticancer and antibacterial potentials	40
Controllable synthesis of uniform small-sized MgCO3 from Mg2+ concentrated seawater brine for the preparation of epoxy resin composite and high purity MgO	39
Effect of inlet volute wrap angle on the flow field and performance of double inlet gas cyclones	39
Recent progress on anode materials and their preparation for use in sodium ion batteries	38
Knowledge-informed reduced-order modeling for erosion prediction in pipe bends	38
Promoting simulation reliability for burden distribution of blast furnace: Parameters measurement and calibration of lump ores	37
Implementation and validation of a bonded particle model to predict rheological properties of viscoelastic materials	37
Numerical study of gas–solid two-phase flow and erosion in a cavity with a slope	35
Pickering emulsions stabilized by colloidal surfactants: Role of solid particles	35
CFD-DEM simulation of high density particles fluidization behaviors in 3D conical spouted beds	34
Void fraction for random loose packing of the cylindrical particles considering filling rate, material and shape	34
A new transient nonuniformity index for the feed injection zone of a multiphase fluidized bed reactor	34
Role of surface roughness in the magnesite flotation and its mechanism	34
Experimental investigation on the gravity driven discharge of cohesive particles from a silo with two outlets	33
Numerical study on the settlement of two parallel spherical particles in upward flow	33
Voidage correction method for DEM study of 3D pebble flows in a bed of cycloidal base	33
New horizons for therapeutic applications of nanozymes in oral infection	33
Glutamate oxidase-integrated biomimetic Fe3O4 hybrids as cascade nanozymes for glutamate detection	33
Editorial Board	33
Water-soluble organic matter with various polarities in PM2.5 over Xi'an, China: Abundance, functional groups, and light absorption	32
Compositional characteristics and toxicological responses of human lung epithelial cells to inhalable particles (PM10) from ten typical biomass fuel combustions	32
Boiler NOx emission prediction based on ensemble learning and extreme learning machine optimization	32
Alginate-gelatin emulsion droplets for encapsulation of vitamin A by 3D printed microfluidics	32
Editorial Board	31
Effect of operational and geometric parameters on the hydrodynamics of a Wurster coater: A CFD-DEM study	31
Validation of an improved two-fluid model with particle rotation for gas-solid fluidized bed	31
Aerosol composition, sources, and secondary processing during autumn at a regional site in the Beijing–Tianjin–Hebei region	30
Diffusive smoothing CFD-DEM simulations with particle-scale mass transfer in LBE solid-phase oxygen control systems	30
A generalized memory effect in fluid/flame dynamics due to unsteady events	30
Nb5+ doping modulates crystal morphology and electronic structure of spinel LiMn2O4 for high-rate long-cycle cathode materials	29
Numerical investigation of separation efficiency of the cyclone with supercritical fluid–solid flow	29
Romanesco-like calcium carbonate hybrid nanoflowers via egg white lysosomal enzyme-assisted biomineralization	29
Penetration into a granular bed in the presence of upward gas flows	29
DEM investigation of strength and critical state behaviours of granular materials under true triaxial loadings	28
Data driven reduced modeling for fluidized bed with immersed tubes based on PCA and Bi-LSTM neural networks	28
Process intensification for the synthesis and purification of battery-grade Li2CO3 with microfluidics	27
An extended unresolved CFD-DEM coupling method for simulation of fluid and non-spherical particles	27

Advances of high-performance LiNi1-x-yCoxMyO2 cathode materials and their precursor particles via co-precipitation process	27
Hot-melt extrusion promotes dissolution, extends “spring-parachute” process and inhibits crystallization in supersaturating microparticle systems	27
Formation of biomimetic hierarchical nanostructure in homopolymers and block copolymer ternary blend particles	26
Editorial Board	26
A critical review of ferritin as a drug nanocarrier: Structure, properties, comparative advantages and challenges	26
Editorial Board	26
Editorial Board	26
Bubbling phenomena during granular drainage from an inclined closed-top quasi-two-dimensional conduit	26
How rotational speed of planetary ball mill and polymer load influence the performance and water vapor sorption in solid dispersions composed of tadalafil and soluplus	26
Experimental study on eliminating various typical fire smokes by ultrasonic field	26
Effect of succinic acid on morphology transformation of the anhydrous magnesium carbonate particles prepared by magnesium chloride hexahydrate and urea	25
Effect of particle behavior on the apparent viscosity of semi-solid metal: CFD-DEM simulation and artificial neural networks prediction	25
Impact of the spindle number on the material transport and mixing during planetary roller melt granulation	25
Green synthesis and eco-biological evaluation of Ag/Fe bimetallic nanoparticles using Vallaris solanacea leaf extract targeting insecticide resistance	24
Comparing two IBM implementations for the simulation of uniform packed beds	24
Construction of [email protected] nanoparticles with multiple hetero-interfaces for enhanced electromagnetic wave absorption	24
Self-cleaning effect and secondary swirling clean gas for suppressing particle deposition on vortex finder of gas cyclones	24
Positive and negative effects of graphite flake and monolayer graphene oxide templates on protein crystallization	24
A novel heterogeneous binding model for simulating nuclear fuel particle FB-CVD coating process based on CFD-DEM concept	24
Magnetic activated carbon for the removal of methyl orange from water via adsorption and Fenton-like degradation	23
Characterization of powder flow properties from micron to nanoscale using FT4 powder rheometer and PT-X powder tester	23
Investigation on effect of drag models on flow behavior of power-law fluid–solid two-phase flow in fluidized bed	23
Review of the research on the development and utilization of clay-type lithium resources	23
Reconstruction of particle distribution for tomographic particle image velocimetry based on unsupervised learning method	23
Design optimization of guide vane for mitigating elbow erosion using computational fluid dynamics and response surface methodology	22
Synergistic impact mechanism of particle size and morphology in superalloy powders for additive manufacturing	22
Real-time pore structure evolution difference between deep and shallow coal during gas adsorption: A study based on synchrotron radiation small-angle X-ray scattering	21
Mesoscale modeling on the influence of surfactants on seepage law during water injection in coal	21
Efficient synthesis of forsterite via high-temperature thermochemical reactions from boron mud waste without briquetting	21
Thermodynamic and kinetic mechanism of phase transformation of levofloxacin hydrochloride	21
Particle convective heat transfer near the wall in a supercritical water fluidized bed by single particle model coupled with CFD-DEM	20
Fabrication of high-purity alumina particles by spray drying and surface modification with SDS for methylene blue removal	20
Effects of static bed height on pressure fluctuations and phase hold-ups in fluidized bed flotation column	20
Fragmentation of fuel pellets during transport via a belt conveyor: A design of experiment study	19
Experimental characterization and CFD simulation of gas maldistribution in turbulent fluidization of Group A particles	19
Application of dynamic image analysis to the optical characterisation of fibrous bulk material	19
The divergence of nearby trajectories in soft-sphere DEM	19
Enhanced bioavailability and biosafety of cannabidiol nanomicelles for effective anti-inflammatory therapy	19
Ultra-homogeneous Cu2−xSe nanoparticles as near-infrared II plasmonic phototheranstics for photothermal/chemodynamic synergistic therapy of liver cancer	19
A clean disposal method of carbide slag with carbon emission reduction: Used as a flux for iron ore sintering	19
Grinding mechanism of wet vertical spiral stirred mill based on DEM-CFD: Role of grinding sphere motion	18
Turning teawaste particles into magnetic bio-sorbents particles for arsenic removal from wastewater: Isotherm and kinetic studies	18
Convective drying of wood chips: Accelerating coupled DEM-CFD simulations with parametrized reduced single particle models	18
Research on discrete element parameter calibration of ore particles based on Tavares breakage model in a SAG mill	18
Experimental study on filtration performance of the moving bed granular filter with axial flow	18
Soft coarse-grained particle model for particle-fluid systems	18
Editorial Board	18
Synthesis of nano FePO4 particles via high-temperature oxidative precipitation in microreactor	18
Fully resolved simulations of viscoelastic suspensions by an efficient immersed boundary-lattice Boltzmann method	18
Influence of calendering process on the structural mechanics and heat transfer characteristics of lithium-ion battery electrodes via DEM simulations	18
Aerosol optical properties and its direct radiative forcing over Tibetan Plateau from 2006 to 2017	18
Characterizing dynamic load propagation in cohesionless granular packing using force chain	18
Mapping strategies for unresolved CFD-DEM modeling of fluid-solid flows: Latest developments and perspectives	18
Balancing particle properties for practical lithium-ion batteries	17
Micro-flow structure at regime transition from bubbling to turbulent fluidization in a fluidized bed	17
Revealing the correlation between structural evolution and long-term cyclability of the LiNi0.5Co0.2Mn0.3O2/artificial graphite pouch cells at various rates	17
Settling and spreading behaviour of particle clusters in quiescent liquids in confined vessels	17
Editorial Board	17
Editorial Board	17
A simulation study for a cost-effective PET-like detector system intended to track particles in granular assemblies	17
Measurement of acceleration and angular velocity of particles during a 3D silo discharge	17
Simulation of the deformable lateral boundaries in biaxial test using DEM	17
One-step synthesis of hierarchically porous fly ash-based NaX zeolite as assisted by CTAB for low-concentration CO2 adsorption	17
Preparation of baicalin colon-targeted granules and its intervention effect on ulcerative colitis in rats	16
Numerical study on hydrodynamics of gas–solids circulating fluidized bed with L-valve	16
An approach to determine settling properties of flocculated tailings suspensions based on a single batch settling test	16
Numerical simulation of the effect of coaxial and cross-axis injection modes on pulverized coal combustion in the raceway of blast furnace tuyere	16
Investigation of the flotation behavior and interaction characteristics of micro-fine quartz and magnesite in a dodecylamine system under ultrasonic treatment	16
A modified PVDF-HFP/PMMA crosslinked co-polymer for high-performance all-solid-state lithium metal batteries	16
The potential of starch-chitosan blends with poloxamer for the preparation of microparticles by spray-drying	16
Unraveling multi-parameter coupling dynamics and building a machine learning-based predictive model for viscous dissipation rate in pin-type stirred mills	16
Novel self-assembled porous yolk-shell NiO nanospheres with excellent electrochromic performance for smart windows	16
Multi-objective optimization of laser perforated fuel filter parameters based on artificial neural network and genetic algorithm	16
Improved suspension quality and liquid level stability in stirred tanks with Rotor-Stator agitator based on CFD simulation	15
Mixing performance for wet and sticky bulk materials in a vertical blender using DEM simulation	15
Effect of different components in cement raw meal on carbothermal reduction of NO in flue gas: An experimental study	15
A meso-scale flow model of gas-liquid-solid mini-fluidized beds with improved macro-scale interaction of wall effects	15
Investigations into the flow dynamics of mixed biomass particles in a fluidized bed through Hilbert-Huang transformation and data-driven modelling	15
Modulation of reactive oxygen species to enhance sonodynamic therapy	15
Multi-scale numerical simulation of fluidized beds: Model applicability assessment	15

A novel method for controlling solids circulation between two fluidized bed reactors in a looping system	15
Lithium polysulfide solvation and speciation in the aprotic lithium-sulfur batteries	15
Discrete element modeling of shear cell experiments with cohesive wooden spheres	14
The structure of colloidal polyethylenimine–silica nanocomposite microparticles	14
Numerical simulation study on particle breakage behavior of granular materials in confined compression tests	14
High-entropy sulfurization enables efficient non-noble metal-based NiCoFeCuS electrocatalyst for alkaline oxygen evolution reaction	14
Effect of impeller rotational speed and paddle angle on binary mixing in a paddle mixer based on DEM	14
Gaussian integral method for void fraction	14
Collaborative optimization of linear vibrating screen screening efficiency and dynamic response stability based on coupled DEM-MBK simulation	14
Effect of cylinder wall parameters on the final packing density of mono-disperse spheres subject to three-dimensional vibrations	14
Investigation on the influence of vortex generator on particle resuspension	14
DEM analysis of the influence of stirrer design on die filling with forced powder feeding	14
Hydrodynamics of pressurized cohesive fluidized beds: A CFD-DEM study	14
Research on the cuttings discharge in air cushion chamber of slurry shield based on CFD-DEM coupling method	14
Structure-activity relationships in lithium-hosting montmorillonite: Octahedral lithium locking mechanisms	14
Editorial Board	14
Hydroxyapatite composites with carbon allotropes: Preparation, properties, and applications	13
Hydrodynamics of a bubble-induced inverse fluidized bed reactor with a nanobubble tray	13
Tailoring V2CTx to form a derivative hybrid by partial oxidation for enhanced lithiation behavior	13
Cataracting-centrifuging transition investigation using nonspherical and spherical particles in a rotary drum through CFD simulations	13
A core-shell composite pigment with rutile TiO2 intensification for UV inhibition	13
X-ray imaging techniques for gas–solid fluidized beds: A technical review	13
Using waste to treat waste: Red mud induced hierarchical porous γ-AlOOH and γ-Al2O3 microspheres as superior Pd support for catalytic reduction of 4-nitrophenol	13
Targeted therapeutic effects of oral magnetically driven pectin nanoparticles containing chlorogenic acid on colon cancer	13
Macro-microscopic dynamic characteristics of the ballast bed induced by the variation of moisture content	13
Experimental investigation about the incipient velocity of spherical particles on a hemispherical bed surface	13
A novel method for modeling the phase change of iron ore particles in the cohesive zone of a blast furnace	13
Theoretical study on aerosol deposition in a circular tube due to diffusion and thermophoresis in plug laminar flow neglecting coagulation	13
Influence of stearic acid surface modification on flowability and agglomeration of battery grade Li2CO3 powder	13
Identification of coexistence of biological and non-biological aerosol particles with DAPI (4′,6-diamidino-2-phenylindole) stain	13
Particle size distribution in a multi-zone circulating fluidized bed polymerization reactor	12
GPU accelerated MFiX-DEM simulations of granular and multiphase flows	12
Nanofluids: Critical issues, economics and sustainability perspectives	12
Numerical investigations on gas–solid flow in circulating fluidized bed risers using a new cluster-based drag model	12
Modelling and optimization of ultra-fine copper sulphide grinding: A hybrid statistical and machine learning approach	12
30-year scientific legacy and future of nanoparticles in next-generation cosmetic applications	12
Origin of enhanced electrochemical performance in lithium-rich cathode materials via the fast ion conductor Li2O-B2O3-LiBr	12
Biotransformation, multifunctional recycling mechanism of nanostructures, and evaluation of the safety of nanoscale materials	12
Two-dimensional ultrasonic vibration-assisted grind-polishing of MFC valve surface with an innovative SPPU tool	12
Microfluidic platform serves as controllable fabrication of binary Mo/Ir nanodots/carbon hetero-material for efficient electrocatalytic nitrogen reduction	12
A new method for identifying flow pattern of spouted fluidized bed by coupling Hilbert–Huang transform characteristics of differential pressure signals in different zones	12
Application of solvent evaporation technique for pure drug crystal spheres preparation	12
Cutting-edge recycling solution at pilot-scale for end-of-life LiFePO4 batteries and recovery of graphite using centrifuge filtration	12
CFD simulation and optimization of an industrial cement gas–solid air classifier	12
Investigation of drying process of non-spherical particle in a pulsed fluidized bed	12
Strength and friction dependency of the stress Lode angle in true triaxial configurations: A discrete element perspective	12
Dynamic properties of granular materials with varying coefficients of uniformity under cyclic shear and constrained compression from DEM simulations	12
A new method for precise optical measurements of the sub-micron height of levitation of droplet clusters	12
Enrichment of surface charge contributes to the stability of surface nanobubbles	12
Physics informed neural network model for multi-particle interaction forces	12
Preparation of slow-release regulated Rs-198 bilayer microcapsules and application of its lyophilized bacterial inoculant on Capsicum annuum L. under salt stress	12
Impact of the polydispersion of TiO2 materials on their particle size calculated from specific surface area results obtained during an interlaboratory comparison exercise	12
Combustion characteristics of millimeter-sized aluminum particles in fluidized bed under various O2/CO2/H2O atmospheres	12
Preparation of pistachio shell-based porous carbon and its adsorption performance for low concentration CO2	12
Chemical components of PM2.5 in different seasons in Harbin, China	11
Modeling the motion and breakage of wet fibers in a fluidized bed using a combined bonded multi-sphere model	11
Copper metal-functionalized carbon from rattan waste via microwave pyrolysis for enhanced chloramphenicol removal: Optimization and F-test study	11
Investigation on the particle loss and applicability of aviation nvPM measurement methodology for wide particle size ranges	11
Engineering lattice defects in 2D nanomaterials for enhancing biomedical performances	11
CFD-DEM investigation of fluidization of the non-monodisperse particle system in a spouted bed	11
Cross-linked α-amylase aggregates on Fe3O4 magnetic nanoparticles modified with polydopamine/polyethyleneimine for efficient hydrolysis of starch	11
Effects of particle size reduction due to wear on heat transfer in a fluidized bed: A CFD-DEM study	11
Influence of wire spacing and plate spacing on electrostatic precipitation of nanoparticles: An approach involving electrostatic shielding and diffusion charging	11
Porous Ni-rich cathode material constructed by K+ and F− co-doping	11
Molecular dynamics study of water molecules nucleation for fine particle removal: Effects of wettability and aggregation modes and comparison with experiment	11
A novel energy-efficient way to prepare solid lipid microspheres loaded with nanoscale drugs by combining LLPS and in-situ crystallization	11
Research on the macro- and meso-mechanical properties of frozen sand mold based on Hertz-Mindlin with Bonding model	11
Reynolds number dependence of particle transport in a 90° bend with electrostatic effects	11
Interpretable machine learning analysis and automated modeling to simulate fluid-particle flows	11
Analysis of synthetic parameters for coating aluminum powders with phenyltriethoxysilane coupling agent and their effects on powder flow behavior	11
Discrete element-embedded finite element model for simulation of soft particle motion and deformation	11
Innovative construction of macroporous–mesoporous structured spherical alumina and its hydrothermal stability	11
Transient flameout process of boron-magnesium agglomerates during combustion in oxygen-rich atmospheres	11
Arch formation mechanism and discharge process of cohesive fine powder in a vibrated silo	11
Thermodynamic and kinetic studies on crystallization process of SrCl2·6H2O particulate model and influence of ultrasonic treatment on its anti-agglomeration performance under optimized conditions	11
Enhanced solar absorption and steam generation in lithium bromide-based modified copper oxide nanofluids under simulated solar flux	11
Synthesis of Mn/Co-MOF for effective removal of U(VI) from aqueous solution	10
Programmed nanoparticle-loaded microparticles for effective antigen/adjuvant delivery	10
Initial equilibrium droplet size distribution at the swirl separator with progressive process	10
Perspective on powder technology for all-solid-state batteries: How to pair sulfide electrolyte with high-voltage cathode	10
Influence of ammonia and Brown gas injection on the iron ore sintering characteristics under biochar substitution	10
On the determination of particle impact breakage in selection function	10
Improved drag force calculation in CFD-DEM using coarse cell for dilute large-sized particles: Effective projected area for drag force distribution	10
Two-dimensional silica enhanced solid polymer electrolyte for lithium metal batteries	10
Hydrodynamic characteristics of a rectangular gas-driven inverse liquid-solid fluidized bed	10
New insights into enhancing sustainable flotation performance of fine chalcopyrite via surface modification	10
Nucleation and growth of MOF-based composite materials for electrochemical energy storage	10
Micro-sized nanoaggregates: Spray-drying-assisted fabrication and applications	10
Numerical prediction of particle slip velocity in turbulence by CFD-DEM simulation	10
The flow behavior of powder stearin-based methyl ester sulfonates and the effect of glidant	10
Development of a two-stage virtual impactor for the generation of micrometer-scale monodisperse aerosols	10
Editorial Board	10
Coupled simulation of fluid-particle interaction for large complex granules: A resolved CFD-DEM method for modelling the airflow in a vertical fixed bed of irregular sinter particles	10
Pollutant emissions from biomass burning: A review on emission characteristics, environmental impacts, and research perspectives	10
Research progress on simulation of multiscale mass transfer processes in gas-solid system by computational mass transfer	10