Clean Technologies and Environmental Policy

Papers
(The median citation count of Clean Technologies and Environmental Policy is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
The green solvent: a critical perspective111
Applications of machine learning algorithms for biological wastewater treatment: Updates and perspectives92
Ecofriendly geopolymer concrete: a comprehensive review75
Industrial hydrogen production technology and development status in China: a review71
Steps toward a resilient circular economy in India64
Environmental regulation, economic policy uncertainty, and green technology innovation61
Carbon footprint in Higher Education Institutions: a literature review and prospects for future research61
Construction and demolition waste management in Korea: recycled aggregate and its application57
Air pollution forecasting application based on deep learning model and optimization algorithm55
Flash pyrolysis of biomass: a review of recent advances54
The nexus between misallocation of land resources and green technological innovation: a novel investigation of Chinese cities54
Banana fibre: a natural and sustainable bioresource for eco-friendly applications53
Green innovation efficiency: a threshold effect of research and development47
Microbial technologies for heavy metal remediation: effect of process conditions and current practices46
A high-resolution geographic information system-analytical hierarchy process-based method for solar PV power plant site selection: a case study Algeria45
Circular economy pillars: a semi-systematic review43
Designing a resilient and sustainable closed-loop supply chain network in copper industry43
Assessment of carbon footprint from transportation, electricity, water, and waste generation: towards utilisation of renewable energy sources42
Effects of Fe2O3 and Al2O3 nanoparticle-diesel fuel blends on the combustion, performance and emission characteristics of a diesel engine40
Thematic exploration of sectoral and cross-cutting challenges to circular economy implementation38
Removal of organic pollutants from produced water by batch adsorption treatment36
Revisiting the environmental impact of financial development on economic growth and carbon emissions: evidence from South Asian economies35
Global growth in offshore wind turbine technology35
Damage detection of wind turbine system based on signal processing approach: a critical review35
Big data analytics application for sustainable manufacturing operations: analysis of strategic factors34
Experimental study of a combined biomass and solar energy-based fully grid-independent air-conditioning system34
Allocation of carbon emission quotas in Chinese provinces based on Super-SBM model and ZSG-DEA model34
Global prospects and challenges of latent heat thermal energy storage: a review32
An overview of wind energy development and policy initiatives in India32
Decision support tools for wind and solar farm site selection in Isfahan Province, Iran32
Strengthening potential of xanthan gum biopolymer in stabilizing weak subgrade soil30
Algal bioplastics: current market trends and technical aspects30
Examining construction waste management policies in mainland China for potential performance improvements30
Soft computing techniques to predict the compressive strength of green self-compacting concrete incorporating recycled plastic aggregates and industrial waste ashes30
Aluminum nanoparticles from liquid packaging board improve the competitiveness of (bio)diesel29
Practices and roles of bamboo industry development for alleviating poverty in China28
A study on the thermochemical co-conversion of poultry litter and elephant grass to biochar28
Policy incentives in carbon capture utilization and storage (CCUS) investment based on real options analysis28
Design of agrivoltaic system to optimize land use for clean energy-food production: a socio-economic and environmental assessment28
Enhanced paraquat removal from contaminated water using cell-immobilized biochar27
Investigating the inverted N-shape EKC in the presence of renewable and nuclear energy in a global sample27
Efficiency assessment of green technology innovation of renewable energy enterprises in China: a dynamic data envelopment analysis considering undesirable output27
An analysis of UK retailers’ initiatives towards circular economy transition and policy-driven directions27
An overview of the inequality in China’s carbon intensity 1997–2016: a Theil index decomposition analysis26
Technology innovation and sustainability: challenges and research needs26
Functionalized multi-walled carbon nanotubes for oil spill cleanup from water26
Impacts of Paris agreement, fossil fuel consumption, and net energy imports on CO2 emissions: a panel data approach for three West European countries25
Laser-assisted preparation of C3N4/Fe2O3/Au nanocomposite: a magnetic reusable catalyst for pollutant degradation25
Techno-economic assessment of microalgae cultivation in a tubular photobioreactor for food in a humid continental climate24
Economic potential of bioremediation using immobilized microalgae-based microbial fuel cells24
Management of waste electrical and electronic equipment based on circular economy strategies: navigating a sustainability transition toward waste management sector24
Catalytic pyrolysis and kinetic study of real-world waste plastics: multi-layered and mixed resin types of plastics23
Textile industry and environment: can the use of bacterial cellulose in the manufacture of biotextiles contribute to the sector?23
Dynamic decision-making and coordination of low-carbon closed-loop supply chain considering different power structures and government double subsidy22
Effect of growth factors on the production of mycelium-based biofoam22
Impact of electric vehicle development on China’s energy consumption and greenhouse gas emissions22
Life cycle assessment of bio-methane and biogas-based electricity production from organic waste for utilization as a vehicle fuel22
A techno-economic feasibility of a process for extraction of starch from waste avocado seeds22
Sustainable technologies for waste reduction and pollutants removals21
Regional integration degree and its effect on a city’s green growth in the Yangtze River Delta: research based on a single-city regional integration index21
Design and performance analysis of a hydrogen liquefaction process21
Experimental investigation of novel hybrid phase change materials21
Utilization of cationic polymer-modified fly ash for dye wastewater treatment21
CuAg and AuAg bimetallic nanoparticles for catalytic and heat transfer applications21
Strategic analysis of single-use plastic ban policy for environmental sustainability: the case of Pakistan21
Prospects and challenges of renewable energy-based microgrid system in Bangladesh: a comprehensive review21
Blockchain-enhanced trading systems for construction industry to control carbon emissions20
Bibliometric analysis of the evolution of biochar research trends and scientific production20
Barriers to the adoption of the circular economy in the Brazilian sugarcane ethanol sector20
Spray drying absorption for desulphurization: a review of recent developments20
The impact of policy mixes on new energy vehicle diffusion in China20
Effectiveness of energy efficiency improvements in the context of energy subsidy policies20
Mechanisms and strategies for ash deposition reduction in flue gas heat exchanger20
Site suitability analysis for solar farms using the geographic information system and multi-criteria decision analysis: the case of Antalya, Turkey20
Retort carbonization of bamboo (Bambusa vulgaris) waste for thermal energy recovery20
Clean treatment of rejected brine by zero liquid discharge thermal desalination in Persian Gulf countries19
Do environmental concern and perceived risk contribute to consumers' intention toward buying remanufactured products? An empirical study from China19
Biomimetic building facades demonstrate potential to reduce energy consumption for different building typologies in different climate zones19
Climate change and the UN-2030 agenda: Do mitigation technologies represent a driving factor? New evidence from OECD economies19
Evaluation of the coordinated development of economic, urbanization and environmental systems: a case study of China18
Regulating light-duty vehicle emissions: an overview of US, EU, China and Brazil programs and its effect on air quality18
Strategies to promote circular economy in the management of construction and demolition waste at the regional level: a case study in Manaus, Brazil18
Cleaner and sustainable synthesis of high-quality monoglycerides by use of enzyme technologies: techno-economic and environmental study for monolaurin18
Microalgal potential for sustainable aquaculture applications: bioremediation, biocontrol, aquafeed18
Analysis and evaluation of distributed photovoltaic generation in electrical energy production and related regulations of Turkey18
Multi-criteria decision analysis for prospective sustainability assessment of alternative technologies and fuels for individual motorized transport17
Building information modelling knowledge harvesting for energy efficiency in the Construction industry17
Modelling to analyse the process and sustainability performance of forestry-based bioenergy systems17
Insights into the reuse of urban forestry wood waste for charcoal production17
Update on air pollution control strategies for coal-fired power plants17
Minimization of blast-induced dust emission using gene-expression programming and grasshopper optimization algorithm: a smart mining solution based on blasting plan optimization17
Energy performance of typical large residential apartments in Kolkata: implementing new energy conservation building codes of India17
Estimation of the heat required for intermediate pyrolysis of biomass17
Evaluation of green growth efficiency of oil and gas resource-based cities in China16
Heavy metal recovery from electroplating effluent using adsorption by jute waste-derived biochar for soil amendment and plant micro-fertilizer16
Reduction in household air pollution and associated health risk: a pilot study with an improved cookstove in rural households16
Plasma catalysis: a feasible solution for carbon dioxide valorization?16
Photocatalytic degradation of caffeine and E. coli inactivation using silver oxide nanoparticles obtained by a facile green co-reduction method16
A review of current challenges and legal advances in the global management of plastic waste16
Guar gum-stabilized soil: a clean, sustainable and economic alternative liner material for landfills16
Impacts of wind turbines on vegetation and soil cover: a case study of Urla, Cesme, and Karaburun Peninsulas, Turkey16
Eco-friendly zinc oxide nanoparticles from Moringa oleifera leaf extract for photocatalytic and antibacterial applications16
Economic and environmental impact of electric vehicles production in Indonesia15
Thermodynamic and economic evaluation and optimization of the applicability of integrating an innovative multi-heat recovery with a dual-flash binary geothermal power plant15
Towards regional cooperation on sustainable plastic recycling: comparative analysis of plastic waste recycling policies and legislations in Japan and Malaysia15
The economics of renewable energy power in China15
Decarbonising road freight: Is truck automation and platooning an opportunity?15
Saving energy while maintaining the feeling of safety associated with urban street lighting15
Blended formaldehyde adhesive bonded particleboards made from groundnut shell and rice husk wastes15
Review of the materials composition and performance evolution of green alkali-activated cementitious materials14
Investigating the relevance of Environmental Kuznets curve hypothesis in Saudi Arabia: towards energy efficiency and minimal carbon dioxide emission14
Exploration of CO2 emission reduction pathways: identification of influencing factors of CO2 emission and CO2 emission reduction potential of power industry14
Role of microalgae in circular bioeconomy: from waste treatment to biofuel production14
Porous 3D printed concrete beams show an environmental promise: a cradle-to-grave comparative life cycle assessment14
Does income inequality affect direct and indirect household CO2 emissions? A quantile regression approach14
Interrelation between the climate-related sustainability and the financial reporting disclosures of the European automotive industry14
Efficiency of carbon sorbents in mitigating polar herbicides leaching from tropical soil14
Comparative study of hot air drying and microwave drying for dewatered sludge14
Can energy self-sufficiency be achieved? Case study of Warmińsko-Mazurskie Voivodeship (Poland)14
Do Energy Resources matter for Growth Level? The dynamic effects of different strategies of renewable energy, carbon emissions on sustainable economic growth14
Hybrid treatment systems: a paradigm shift to achieve sustainable wastewater treatment and recycling in India14
Upcycling of plastic waste to carbon nanomaterials: a bibliometric analysis (2000–2019)14
Investigations on thermal–hydraulic performance and entropy generation characteristics of sinusoidal channeled printed circuit LNG vaporizer14
Use phase and end-of-life modeling of biobased biodegradable plastics in life cycle assessment: a review14
Minimum marginal abatement cost curves (Mini-MAC) for CO2 emissions reduction planning14
How is the transition away from fossil fuels doing, and how will the low-carbon future unfold?13
Comparative analysis of storage modules under different dispatch strategies for an optimum decentralized hybrid energy solution: a case study of a remote Indian village13
The assessment of solar photovoltaic in Poland: the photovoltaics potential, perspectives and development13
Geotechnical properties of problematic expansive subgrade stabilized with guar gum biopolymer13
Conversion of tobacco processing waste to biocrude oil via hydrothermal liquefaction in a multiple batch reactor13
Economic feasibility studies for Carbon Capture and Utilization technologies: a tutorial review13
Is atmospheric water generation an economically viable solution?13
Greener nanomaterials and their diverse applications in the energy sector13
Adoption of floating solar photovoltaics on waste water management system: a unique nexus of water-energy utilization, low-cost clean energy generation and water conservation13
The trends and projections of greenhouse gas emission by the livestock sector in Malaysia13
Numerical and experimental investigation on the thermochemical gasification potential of Cocoa pod husk (Theobroma Cacoa) in an open-core gasifier12
Accelerating electric vehicle adoption: techno-economic assessment to modify existing fuel stations with fast charging infrastructure12
Sustainable supply chain management in construction industry: a Turkish case12
Sustainable bioethanol and value-added chemicals production from paddy residues at pilot scale12
Effect of urban traffic-restriction policy on improving air quality based on system dynamics and a non-homogeneous discrete grey model12
An experimental study on conversion of high-density polyethylene and polypropylene to liquid fuel12
Optimizing pyrolysis process parameters of plastic grocery bag, with mass–energy assessment and characterization of oil at optimal condition12
Environmental impact assessment of bioplastics production from agricultural crop residues12
Qualitative and energy recovery potential analysis: plastic-derived fuel oil versus conventional diesel oil11
Production of hydrogen- and methane-rich gas by stepped pyrolysis of biomass and its utilization in IC engines11
Decarbonization of EU energy sector: techno-feasibility analysis of 100% renewables by 2050 in Cyprus11
Estimate greenhouse gas emissions from water-saving and drought-resistance rice paddies by deNitrification-deComposition model11
A Lean and Green approach for the eco-efficiency assessment on construction sites: description and case study11
A study on reducing the carbon footprint of architectural buildings based on their materials under the guidance of eco-design strategies11
The impacts of environmental performance and development of financing decisions on economic sustainable performance: from the view of renewable and clean energy industry11
Establishing a sustainable development assessment framework for a smart city using a hybrid Z-fuzzy-based decision-making approach11
Utilization of various solid leather wastes for the production of blended bricks11
Energy economics and environmental assessment of hybrid hydel-floating solar photovoltaic systems for cost-effective low-carbon clean energy generation11
A green approach for modification and functionalization of wool fabric using bio- and nano-technologies11
Environmental assessment coupled with machine learning for circular economy10
An experimental investigation on the combustion characteristics of a direct injection diesel engine fuelled with an algal biodiesel and its diesel blends10
Friedel-crafts acylation of furan using chromium-exchanged dodecatungstophosphoric acid: effect of support, mechanism and kinetic modelling10
Environmental aspects and economic evaluation of new green hydrolysis method for waste feather processing10
A comprehensive review on solar thermal desalination systems based on humidification-dehumidification approach10
Digital water: artificial intelligence and soft computing applications for drinking water quality assessment10
Battery recycling policies for boosting electric vehicle adoption: evidence from a choice experimental survey10
Potential matching of carbon capture storage and utilization (CCSU) as enhanced oil recovery in perspective to Indian oil refineries10
A novel de-rusting method with molten salt precleaning and laser cleaning for the recycling of steel parts10
Practices of environmental protection, technological innovation, economic promotion and social equity in hydropower development: a case study of cascade hydropower exploitation in China’s Dadu River b10
Analyzing interrelationships among environmental sustainability innovation factors10
Technology adoption to reduce the harvesting losses and wastes in agriculture10
Semi-dry flue gas desulphurization in spray towers: a critical review of applicable models for computational fluid dynamics analysis10
Global declarations on electric vehicles, carbon life cycle and Nash equilibrium10
Effect of pre-treatment on mesophilic anaerobic co-digestion of fruit, food and vegetable waste10
Assessment of solar PV potential and performance of a household system in Durban North, Durban, South Africa10
Separation of alumina from aluminum-rich coal fly ash using NaOH molten salt calcination and hydrochemical process10
A multicriteria model, based on the PROMETHEE II, for assessing corporate sustainability10
Financial feasibility of waste-to-energy technologies for municipal solid waste management in Muscat, Sultanate of Oman10
The technical and economical feasibility study of offshore wind farms in Turkey10
Technology-push, demand-pull and endogenous drivers of innovation in the renewable energy industry10
Prioritizing novel wastewater-to-hydrogen production technologies based on different decision-making approaches10
Waste tyre pieces as photothermal absorbers for efficient evaporation in solar desalination systems9
Enhanced biomethane production via thermophilic anaerobic digestion of cattail amended with potassium phosphate- and magnesium-modified biochar9
Development of a low-carbon, healthy and innovative value-added riceberry rice product through life cycle design9
Environmental-friendly mortar produced with treated and untreated coal wastes as cement replacement materials9
Utilization study on red brick waste as novel reinforcing and economical filler for acrylonitrile butadiene rubber composite9
Fuzzy optimization model for enhanced weathering networks using industrial waste9
Public perception of transitioning to a low-carbon nation: a Malaysian scenario9
Optimisation of biochar-based supply chains for negative emissions and resource savings in carbon management networks9
Circular economy: national and global policy—overview9
Evaluating the COVID-19 impacts on the construction and demolition waste management and resource recovery industry: experience from the Australian built environment sector9
Economic efficiency of resource recovery—analysis of time-dependent changes on sustainability perception of waste management scenarios9
Causal network maps of urban circular economies9
Comprehensive review and future research directions on using various lanthanum-based adsorbents for selective phosphate removal9
Early prediction of Spirulina platensis biomass yield for biofuel production using machine learning9
Making a case for sustainable building materials to promote carbon neutrality in Indian scenario9
Evaluation of the viability potential of four grid-connected solar photovoltaic power stations in Jiangsu Province, China9
Assessing sustainability of Islamic countries via data envelopment analysis (DEA)9
Performance of sustainable cement mortar containing different types of masonry construction and demolition wastes9
Bioengineered and biocompatible silver nanoparticles from Thalictrum foliolosum DC and their biomedical applications9
Selecting sustainable renewable energy-powered desalination: an MCDM framework under uncertain and incomplete information9
Biochar supported manganese based catalyst for low-temperature selective catalytic reduction of nitric oxide9
Recycling of steel slag as an alkali activator for blast furnace slag: geopolymer preparation and its application in composite cement9
Cost-benefit analysis of sustainable drainage systems considering ecosystems services benefits: case study of canal do mangue watershed in Rio de Janeiro city, Brazil8
Effects of different water percentages in non-surfactant water-in-diesel emulsion fuel on the performance and exhaust emissions of a small-scale industrial burner8
The global plastic waste challenge and how we can address it8
Sustainability performance of the Indian cement industry8
Recycling of solar cells from photovoltaic modules via an environmentally friendly and controllable swelling process by using dibasic ester8
Suitability modeling and sensitivity analysis for biomass energy facilities in Turkey8
Comprehensive review of solar radiation modeling based on artificial intelligence and optimization techniques: future concerns and considerations8
Sustainable Development Goals—Climate Action Nexus:Quantification of Synergies and Trade-offs8
Environmental, field and impurity factors to increase the agricultural performance of Brazilian and Australian sugarcane mills8
Assessment of biodiesel stability under long-term storage and dynamic accelerated oxidation: a comparison approach8
A Pinch Analysis approach for minimizing compression energy and capital investment in gas allocation network8
On the replacement of traditional stabilizers by guaiacol in environmentally safe nitrocellulose-based propellants8
Thermodynamic modelling of dimethyl ether steam reforming8
A reliability-based rock engineering system for clean blasting: risk analysis and dust emissions forecasting8
Integration of low-grade heat from exhaust gases into energy system of the enterprise8
Modeling of CO2 emissions via optimum insulation thickness of residential buildings8
A novel clean biopolymer-based additive to improve mechanical and microstructural properties of clayey soil8
Pomegranate peel-derived biochar as ecofriendly adsorbent of aniline-based dyes removal from wastewater8
Advances in the carbonation of MgO-based binder and CO2 utilization in the construction industry8
Reduction of dust deposition in air-cooled condensers in thermal power plants by Ni–P-based coatings8
Analysis of green technology investment for Chinese waste electrical and electronic equipment processing enterprises under different subsidy modes8
Stability improvement of laccase for micropollutant removal of pharmaceutical origins from municipal wastewater8
Analyzing driving forces of China’s carbon emissions from 1997 to 2040 and the potential emission reduction path: through decomposition and scenario analysis8
Experimental and numerical investigation of using waste glass aggregates in asphalt pavement to mitigate urban heat islands8
Utilizing sewage wastewater heat in district heating systems in Serbia: effects on sustainability7
Spatial optimization of photovoltaic-based hydrogen-electricity supply chain through an integrated geographical information system and mathematical modeling approach7
Fly ash-based geopolymers with refractoriness properties7
Can driving-restriction policies alleviate traffic congestion? A case study in Beijing, China7
Optimization of cultivation condition of newly isolated strain Chlorella sorokiniana pa.91 for CO2 bio-fixation and nutrients removal from wastewater: Impact of temperature and light intensity7
Economics of vertical farming in the competitive market7
Fire-resistant cellulose boards from waste newspaper, boric acid salts, and protein binders7
Application of waste biomass for the production of biofuels and catalysts: a review7
Simultaneous removal of inorganic and organic pollutants from multicomponent solutions by the use of zeolitic materials obtained from fly ash waste7
Prospect of China’s synthetic natural gas from coal gasification technology under consideration of economic, environmental, and security factors7
Twenty years of energy policy in Europe: achievement of targets and lessons for the future7
Investigating environmental and economic aspects of sustainability by recycling PET plastic bottles: A game-theoretic approach7
Exploring the circularity potential regarding the multiple use of residual material7
H2-rich syngas produced from steam gasification of municipal solid waste: a modeling approach7
Managing a sustainable integrated inventory model for imperfect production process with type one and type two errors7
Feasibility study on the use of tagouk ash as pozzolanic material in concrete7
Optimal ecodesign selection for biodiesel production in biorefineries through multicriteria decision making7
Can digital infrastructure induce urban green innovation? New insights from China7
Defatted spent coffee grounds-supported cobalt catalyst as a promising supercapacitor electrode for hydrogen production and energy storage7
Maximizing intrinsic value of microalgae using multi-parameter study: conjoint effect of organic carbon, nitrate, and phosphate supplementation7
The environmental and energy policies to enable sustainable consumption and production in the Gulf Cooperation Council countries7
Effect of organic loading rate on the biological performance of the thermophilic anaerobic membrane bioreactor treating pulp and paper primary sludge7
Eco-innovation assessment of biodigesters technology: an application in cassava processing industries in the south of Brazil, Parana state7
Application of organic wastes to soils and legislative intricacies in a circular economy context7
Thermochemical recovery from the sustainable economy development point of view—LCA-based reasoning for EU legislation changes7
Modeling and optimization of reactive cotton dyeing using response surface methodology combined with artificial neural network and particle swarm techniques7
A review on the handling of discounting in eco-efficiency analysis7
Sustainable utilization of incinerated paper mill sludge ash for the manufacture of building bricks7
0.079199075698853