Microfluidics and Nanofluidics

Article	Citations
A low-cost method of fabricating Parylene-SU-8 micro-nanofluidic chip by thermal nanoimprint and multilayer compositing	67
A compact modularized power-supply system for stable flow generation in microfluidic devices	37
Visualizing conformance control mechanisms in high-temperature reservoirs: a microfluidic analysis of Pickering emulsified gel systems	36
On-board reagent storage and release by solvent-selective, rotationally opened membranes: a digital twin approach	35
Pressure drop and bubble velocity in Taylor flow through square microchannel	34
Development of a low-cost paper-based microfluidic device for rapid detection of milk adulterants to ensure food safety	26
Investigation of the impact of liquid presence on the acoustic streaming generated by a vibrating sharp tip capillary	23
Fabrication of a microfluidic chip using mechanical micromilling for flocculant testing	23
Modeling and analysis of electrohydrodynamic printing under various pulsed voltage waveforms	22
Process optimization for preparation of curcumin and quercetin co-encapsulated liposomes using microfluidic device	22
Parametric study on the influence of varying angled inlet channels on mixing performance in simple T micromixers and vortex T micromixers across a wide range of Reynolds numbers	21
Analysis of interfacial mixing zone and mixing index in microfluidic channels	21
On the viscous flow through a porous-walled pipe: asymptotic MHD effects	20
Evaluation of the cytotoxic effect of chitosan-zoledronic acid nanoparticles and free zoledronic acid against a549 lung cancer cells using microfluidic technology	20
Modelling, simulation, and experimental characterization of particle sedimentation inside a horizontal syringe	20
Dynamic response of a weakly ionized fluid in a vibrating Riga channel exposed to intense electromagnetic rotation	19
Integration of a finger-actuated quantitative drive module for point-of-care blood typing chips	19
Experimental study on slip flow of nitrogen through microchannels at atmospheric pressure	19
Multiscale modelling of capillary imbibition in 3D-printed porous microfluidic channels	18
Biological structural study for the blood casson fluid flow in catheterized diverging tapered stenosed arteries with emerging shaped nanoparticles: application in drug delivery	18
Study on effects of magnetic fields of different inhomogeneous on the formation mechanism of microdroplets	17
Effects of geometrical confinement on the generation of droplets at microfluidics T-junctions with rectangle channels	16
A hybrid Gaussian mixture/DSMC approach to study the Fourier thermal problem	16
A “Plug-n-Play” permeable brick-based microfluidic pump	15
An investigation on microfluidic preparation of aluminum phosphate adjuvant	15

Reversible bonding for microfluidic devices with UV release tape	14
Computational analysis of Yamada–Ota and Xue models for surface tension gradient impact on radiative 3D flow of trihybrid nanofluid with Soret–Dufour effects	14
Sheathless inertial microfluidic cell separation via a serpentine–contraction–expansion device coupled with a combinatorial extraction regulator	14
A simple projection photolithography method for low-cost rapid prototyping of microfluidic chips	14
Enhancement of the vorticity based on side feeding in a microdevice	14
Characteristics of the travelling speed of droplet flow splitting in bifurcated minichannel networks	14
A mould-free soft-lithography approach for rapid, low-cost and bulk fabrication of microfluidic chips using photopolymer sheets	13
Interplay of acoustophoresis and dielectrophoresis in a standing surface acoustic wave field: from spherical to non-spherical particles	12
ZnO/glass-based SAW tweezer for dexterous particle patterning and patterned cell culturing	12
Phage-displayed antibody fragments in microfluidic paper-based devices: a novel approach for sensitive detection of glycine-extended gastrin 17 biomarker using gold nanoparticles	12
Identification of emulsification regimes in co-flow microfluidics using stroboscopic LED illumination	12
Surface acoustic wave-assisted microfluidic isolation of aptamers	12
Patented technologies of microfluidic devices for targeted drug delivery: a revolution in optimization	12
Microfluidic technologies: buffer exchange in bioprocessing, a mini review	11
Proliferation and weak aerotaxis changes the cancer cell distribution in oxygen gradients at physiological level	11
Preparation of cobalt oxide and tin dioxide nanofluids and investigation of their thermophysical properties	11
Enhancement of zebrafish sperm activation through microfluidic mixing induced by aquatic microrobots	11
PDMS-based microfluidic capillary pressure-driven viscometry and application to Drosophila melanogaster’s hemolymph	11
Copper capillaries with lubricant-infused walls: fabrication and drag reduction performance	10
Investigation of bubble formation dynamics of gas-non-Newtonian liquid two-phase flow in a flow-focusing generator	10
SERS-active core-satellite nanostructures in a membrane filter-integrated microfluidic device for sensitive and continuous detection of trace molecules	10
Cost-effective 3D H-filter fabricated by xurographic method	10
Bypass resistive pulse sensor by MEMS technology	9
Quantifying the dielectrophoretic force on colloidal particles in microfluidic devices	9
Energy efficiency and thermo-hydraulic performance of MWCNT/water nanofluid in flat and circular tubes	9
Characterization of red blood cell deformability induced by acoustic radiation force	9
Simplifying biochemical signal transport in steady flows within a single-cell-trapping microchannel by linear low-order systems	9
Influence of electrode reactions on electroosmotic flow and ion transport in a microchannel	9
Sustainable and optimized fabrication of microfluidic devices for electrochemical detection and monitoring of microbial biofilms	9
Surface-enhanced Raman scattering substrates prepared by controlled synthesis of gold nanobipyramids in microchannels	9
Recent hypotheses on the parameters of microchannel flow boiling: a comprehensive overview	8
A review of experimental and simulation methods for determining accommodation coefficients, particularly TMAC, at fluid-surface interfaces	8
Analysis of sperm cell motion in high viscosity Newtonian and non-Newtonian fluids using a microfluidic channel	8
Merged and alternating droplets generation in double T-junction microchannels using symmetrically inserted capillaries	8
Quantitative analysis for sweat-absorbing times of paper-based microfluidic chips	8
Energy dissipation mechanisms in droplet dynamics: implications for wetting phenomena	8
Comprehensive characterization of a microfluidic platform for DEP manipulation and bio-impedance detection using multi-sized polystyrene microbeads	8
Plane-symmetric co-flow capillary for the generation of monodisperse droplets	8
Flow regulation and drug delivery in bio-microfluidics using macro-porous ferrogel	8
Enhanced particle focusing and sorting by multiple sheath stream in contraction–expansion microchannel	8
Numerical characterization and optimization of the acoustic device for heterogeneous immunoassays	7
Evaluation of dynamical-billiard-shaped chambers as divergent elements of passive micromixers	7
Using dimensionless numbers to understand interfacial mass transfer for parallel flow in a microchannel	7
Quantitative numerical analysis of micro-thermal transpiration pump using kinetic theory of gases	7
A PDMS-based microfluidic system for assessment of the protective role of dexmedetomidine against sepsis-related glycocalyx degradation	7
Directional droplet transport on switchable ratchets by mechanowetting	7
Flow characteristics prediction in a flow-focusing microchannel for a desired droplet size using an inverse model: experimental and numerical study	7
Physiological hypoxia promotes cancer cell migration and attenuates angiogenesis in co-culture using a microfluidic device	7
Unidirectional particle transport in microfluidic chips operating in a tri-axial magnetic field for particle concentration and bio-analyte detection	7
Stiffness influence on particle separation in polydimethylsiloxane-based deterministic lateral displacement devices	7

Patterned synthesis of nanowires in microheaters: design and operational aspects	7
RF sensor-based tracking of nanoparticle’s morphological and relative arrangement variations	7
Analysis on Couette flow of a micropolar fluid through a circular annulus filled with the porous medium	6
A hierarchical levitating cluster containing transforming small aggregates of water droplets	6
Exploring the stability of single emulsion created by microfluidics and its use in the production of core–shell microparticles	6
Magnetic nanodrug delivery in non-Newtonian blood flows	6
Microfluidic continuous flow DNA fragmentation based on a vibrating sharp-tip	6
Model order reduction for the 1D Boltzmann-BGK equation: identifying intrinsic variables using neural networks	6
Modulation of cancer stemness property in head and neck cancer cells via circulatory fluid shear stress	6
Automated measurements and characterization of magnetic permeability in magnetorheological fluid	6
Waviness-induced passive particle manipulation of very dilute suspensions in confined microfluidic flows	6
Analysis and optimization of microfluidic systems for real-time detection of nutrients in soil based on computational fluid dynamics and response surface methodology	6
The mechanisms and properties of inertial microfluidics: from fundamental models to biomedical applications	6
Lab on a chip for detecting Clara cell protein 16 (CC16) for potential screening of the workers exposed to respirable silica aerosol	6
A low-cost and disposable capillary-based paper sensor for measuring blood-plasma viscosity using a smartphone app	6
Numerical investigation of heat transfer and mixing process phenomena inside a channel containing a triangular bluff body and elastic micro-beam: gap spacing and geometric characteristic effects	6
A novel algorithm for rapid estimation of magnetic particle trajectory in arbitrary magnetophoretic devices under continuous fluid flow	6
Effects of porous media geometry and oil repellents on enhanced recovery in water-wet microfluidic chips	6
Electrically actuated peristaltic transport of viscoelastic fluid: a theoretical analysis	6
A magnetically driven elastic rod type bi-directional swimmer at stokes flow	6
Co-printing of micro/nanostructures integrated with preconcentration to enhance protein detection	5
An experimental study of pulsatile mixing in a T-junction at low/moderate Reynolds number	5
Effect of walls on the motion of magnetically driven superparamagnetic microparticles	5
Liquid drops on compliant and non-compliant substrates: an ellipsoid-based fitting for approximating drop shape and volume	5
Investigation of MHD effects on micropolar–Newtonian fluid flow through composite porous channel	5
Tracking the transport of inhaled particles in a lung-on-a-chip during breathing cycles	5
Nanofluidic optical diffraction interferometry for detection and classification of individual nanoparticles in a nanochannel	5
Hybrid microfluidic device for on-demand control of droplet coalescence and testing of emulsion stability	5
Study of the biocompatibility of polymeric resins processed by 3D printing for applications in manufacturing of devices for short term 3D cultures	5
Transport properties of anti-symmetrically charged nanochannels in symmetrical electrolyte solutions	5
Synthesis of tunable gold nanostars via 3D-printed microfluidic device with vibrating sharp-tip acoustic mixing	5
Deep-learning-assisted extraction of height-averaged velocity from scalar signal transport in a shallow microfluidic channel	5
Effects of pillar shapes on the cell isolation in contactless DEP microfluidic devices	5
Generation of monodisperse micro-droplets within the stable narrowing jetting regime: effects of viscosity and interfacial tension	5
Particle separation using modified Taylor’s flow	5
Synergistic thermal and hydrodynamic effects in 3D-printed heat sinks with intricate microchannel patterns	5
On-chip flow rate sensing via membrane deformation and bistability probed by microwave resonators	5
Fabrication of microtiter plate on paper using 96-well plates for wax stamping	5
Enhancement in electroosmotic mixing in obstruction-laden microchannels	5
On time dependent MHD nanofluid dynamics due to enlarging sheet with bioconvection and two thermal boundary conditions	5
Optimization of annular microfluidic biosensor enhanced by active and passive effects using Taguchi’s method coupled with multi-layer perceptron neural networks (MLP-NN) models	5
Acoustic manipulations of droplets with high-speed automatic route planning and navigation	5
Multi-step particle-based microfluidic test for biotin measurement	5
Low-cost sheath-less microfluidic impedance cytometry for point-of-care applications	5
On-chip inductive sensor for ultra-high-throughput integrated detection of oil contamination and viscosity	5
An integrated centrifugal microfluidic system for automatic nanozyme ELISA lateral flow immunoassay at point-of-care testing	4
Pore-scale method for instantaneous assessment of total permeability including the pore geometry effect in microfluidic porous networks through the use of an analogous electrical circuit	4
Analytical model describing the nonlinear behavior of an elastomeric pump membrane in a microfluidic network	4
Controllable fusion of multicellular spheroids using acoustofluidics	4
Synthesis of gold nanoparticles with different sizes and morphologies using a single LTCC-based microfluidic system for point-of-care use in personalized medicine	4
Leveraging perturbation method for the analysis of field-driven microflow of Carreau fluid	4
High-throughput separation of microalgae on a runway-shaped channel with ordered semicircular micro-obstacles	4
High-throughput acoustic separation device with impedance-matched channel	4
Advancing micromixing techniques: the role of surface acoustic waves and fluid–structure interaction in non-newtonian fluids	4
On the behavior of prolate spheroids in a standing surface acoustic wave field	4
A magnetic bead array-based fluorescence immunoassay platform for robust cancer biomarker analysis in clinical blood samples	4
Design of a low-voltage dielectrophoresis lab-on-the chip to separate tumor and blood cells	4
New insights into the construction of a µPAD for cortisol detection in human saliva samples freshly extracted without previous treatment	4
Microfluidic soluto-hydrodynamics using interactive patterned wall-slip and oscillatory thermo-capillarity	4
Microfluidics geometries involved in effective blood plasma separation	4
A new method for selective determination of creatinine using smartphone-based digital image	4
Automated microparticle positioning using a pair of ultrasound-actuated microbubbles for microfluidic applications	4
Performance enhancement of hollow fiber membrane contactors for CO2 absorption using MEA-based functionalized nanofluids	4
Template-assisted fabrication of moon-shaped channels for protein breakthrough analysis	4
Advances in modeling permeability and selectivity of the blood-brain barrier using microfluidics	4
Low-cost microfabrication methodology for microfluidic chips using 3D printer and replica molding techniques for biosensors	4
Spheroids, organoids and kidneys-on-chips: how complex human cellular models have assisted in the study of kidney disease and renal ciliopathies	4
Flow rate variations in microfluidic circuits with free surfaces	4
Cubic autocatalysis-based activation energy and thermophoretic diffusion effects of steady micro-polar nano-fluid	4
Machine learning-based bead enumeration in microfluidics droplets enhances the reliability of monitoring bead encapsulation toward single-cell sorting applications	3
Design and research of the one-way microsphere valve and the PDMS film electromagnetic micropump	3
Viscous and thermal velocity slip coefficients via the linearized Boltzmann equation with ab initio potential	3
Reversible, stable and uniform SERS in a Y-shaped microfluidic chip: chemical imaging of concentration gradients	3
Hybrid (Au-TiO2) nanofluid flow over a thin needle with magnetic field and thermal radiation: dual solutions and stability analysis	3
Heat transfer enhancement by nanofluid coupling with surfactant in overcoming particle agglomeration for microchannel heat sinks	3
Current monitoring in nanochannels	3
Dynamics and stability of a micro-shell subjected to swirling annular flow considering Knudsen number	3
Microfluidic fabrication of porous PLGA microspheres without pre-emulsification step	3
Preparation of nitrocellulose microspheres based on low-cost high-throughput microfluidic technology	3
Behaviors of non-wetting phase snap-off events in two-phase flow: microscopic phenomena and macroscopic effects	3

Flow synthesis of 1-ethyl-3-methylimidazolium ethyl sulfate in a PTFE micro-capillary: an experimental and numerical study	3
Pressure-flow characteristics of a microchannel combining super-hydrophobicity and wall compliance	3
Simulation analysis and experimental verification of thermodynamic characteristics of integrated droplet digital PCR chip	3
A low-cost 3D printed pumping system for generating oscillatory flow in a multicellular lab-on-a-chip device	3
Physical and chemical transformation of crosslinked polyethylene by super-pressure microchannel liquid collision	3
Automated and rapid chemiluminescence immunoassay for cardiac troponin I based on digital microfluidics	3
Electrokinetic insect-bioinspired membrane pumping in a high aspect ratio bio-microfluidic system	3
Design, fabrication and testing of advanced microfluidic systems for precision soil nutrition detection based on interpretable AI	3
Simulation of microfluidic intracellular delivery based on the synergy of cell squeezing and electrical field	3
A size reduction method for rapid digital PCR using thin-film chip and vacuum pouch microfluidic system	3
Envelope boundary conditions for the upper surface of two-dimensional canopy interacting with fluid flow	3
A thermally actuated biocompatible flexible micropump for surface adaptable mounting	3
Melt polymer drawn single and multi-capillary fibre-based electroosmotic pumps	3
High-force, precise, and bidirectional uniaxial stretcher for real-time imaging of normally closed h-PDMS crack-valves for femto-liter fluid delivery	3
Aptamer-based rapid diagnosis for point-of-care application	3
Development of an autonomous picoliter droplet array generating device with a centrifugal microfluidic system	3
Numerical study of the thermal performance and pressure drops of water-based Al2O3 - Cu hybrid nanofluids of different compositions in a microchannel heat sink	3
A generalized analytical model for investigating flow dynamics influenced by wall wettability in capillary-driven microfluidics	3
Paper-based optimized chemical fuel cell with laser-scribed graphene electrodes for energy harvesting	3
Influence on the magnetic field on the scale formation in a microfluidic channel under a low Reynolds number flow	3
Correction: Computation of flow rates in rarefied gas flow through circular tubes via machine learning techniques	2
A practical and cost-effective method to make permanently bonded acoustofluidic chips reconfigurable	2
A novel approach to detect CD4 T-lymphocytes using a microfluidic chip and compact signal processing circuit	2
Transient flow patterns of start-up flow in round microcavities	2
Numerical study of droplet sorting in an asymmetric Y-junction microfluidic by BEM and LS method	2
Microalgae separation using spiral inertial microchannel	2
An analysis of ethanol evaporation and flow at triangular capillary ports at different tilt angles	2
Particle finder: a simple particle detection tool for continuous-flow systems	2
Effect of finite spatial and temporal resolutions on super-resolution particle tracking velocimetry for pressure-driven flow in a nanochannel	2
3D passive microfluidic valves in silicon and glass using grayscale lithography and reactive ion etching transfer	2
Wettability alteration of closed glass microfluidic devices by in situ plasma	2
Molecular dynamics study of electro-osmotic flow in a nanochannel with molybdenum disulfide walls	2
Design and proof-of-concept of a micropillar-based microfluidic chip for trapping and culture of single cells	2
Electrocoalescence of unequal-sized aqueous droplet pair in non-conductive medium	2
Rarefaction slip phenomena within a viscous disk pump with molecular mean free path sized surface roughness elements	2
Nitrite enhanced detection from saliva by simple geometrical modifications of paper-based micromixers	2
Modified capillary number to standardize droplet generation in suction-driven microfluidics	2
Effect of hypoxic hepatocytes on normoxic proximal tubular cells on microfluidic devices	2
Investigation on the focusing and separation of polystyrene microbeads in an integrated microfluidic system using magnetized functionalized flexible micro-magnet arrays	2
Additively manufactured microfluidic enzymatic biofuel cell with comb-like bioelectrodes	2
An empirical model for lateral flow in horizontally stratified flows	2
Carbon nanotubes (CNT) based nanofluid flow due to a rotating cylinder: static and dynamics models	2
Lung-on-a-chip composed of styrene-butadiene-styrene nano-fiber/porous PDMS composite membranes with cyclic triaxial stimulation	2
Water transport behaviors in a CTT-type nanotube system	2
Unsteady time-averaged streaming in microfluidics using traveling surface acoustic waves	2
Convective instability analysis of micropolar fluid-saturated horizontal porous layer	2
Overcoming double Poisson limitation for co-encapsulation in droplets through hydrodynamic close packing of cells	2
Chemical reaction monitoring using tunable optofluidic Y-branch waveguides developed with counter-flow	2
The effective radius of Lucas–Washburn dynamics in periodically constricted tubes	2
Rapid scalable fabrication of stable copper electrowetting valves	2
Automated monitoring and positioning of single microparticle via ultrasound-driven microbubble streaming	2
Analytical study of effective Navier-slip and Stokes–Brinkman coupling for a dual-scale flow in a narrow channel over/inside unidirectional fibrous porous media	2
Analysis of droplet displacement during transport of polydisperse emulsion as drug carriers in microchannels	2
High throughput cell mechanotyping of cell response to cytoskeletal modulations using a microfluidic cell deformation system	2
Heuristic modeling of material properties in Nano/Angstrom-scale channels: integrating experimental observations and MD simulations	2
Observing boundary layer effects on slurry electrode charging in a microfluidic electrochemical flow capacitor	2
A microfluidic approach to investigate the effects of bacteria deposition in porous media containing randomly packed microbeads via real-time pressure measurement	2
Convection analysis of couple stress nanofluid flow across stretching surface with the considerations of Marangoni convection	2
Cryo-printed microfluidics enable rapid prototyping for optical-cell analysis	2
Modular on-chip sensor for flow and monodispersity analysis in droplet-based microfluidics	2
Hydrodynamics and mass-transfer properties of alkane-water liquid-liquid system in a microchannel	2
On-demand formation of heterogeneous gel fibers using two-dimensional micronozzle array	2