Plasma Processes and Polymers

Papers
(The median citation count of Plasma Processes and Polymers is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Nanosecond‐pulsed microbubble plasma reactor for plasma‐activated water generation and bacterial inactivation51
Plasma‐water‐based nitrogen fixation: Status, mechanisms, and opportunities38
The effect of water activated by nonthermal air plasma on the growth of farm plants: Case of maize and barley34
Highly efficient nitrogen fixation enabled by an atmospheric pressure rotating gliding arc29
An overview of low‐temperature plasma surface modification of carbon materials for removal of pollutants from liquid and gas phases28
Positive and negative streamer propagation in volume dielectric barrier discharges with planar and porous electrodes25
NOx synthesis by atmospheric‐pressure N2/O2 filamentary DBD plasma over water: Physicochemical mechanisms of plasma–liquid interactions25
Plasma‐activated medium induces apoptosis in chemotherapy‐resistant ovarian cancer cells: High selectivity and synergy with carboplatin25
The use of plasma‐activated water in viticulture: Induction of resistance and agronomic performance in greenhouse and open field22
Entering the plasma agriculture field: An attempt to standardize protocols for plasma treatment of seeds21
Review on vacuum ultraviolet generation in low‐pressure plasmas21
Catalyst‐enhanced plasma oxidation of n‐butane over α‐MnO2 in a temperature‐controlled twin surface dielectric barrier discharge reactor20
State of the art in nonthermal plasma processing for biomedical applications: Can it help fight viral pandemics like COVID‐19?20
On the transition of reaction pathway during microwave plasma gas‐phase synthesis of graphene nanosheets: From amorphous to highly crystalline structure20
Improving rubber concrete strength and toughness by plasma‐induced end‐of‐life tire rubber surface modification20
Plasma‐activated chemical solutions and their bactericidal effects20
Investigation of the chemical characteristics and anticancer effect of plasma‐activated water: The effect of liquid temperature19
An atmospheric pressure glow discharge in air stabilized by a magnetic field and its application on nitrogen fixation18
Methanol synthesis from CO2 using Ni and Cu supported Fe catalytic system: Understanding the role of nonthermal plasma surface discharge18
Numerical investigation on the heterogeneous pulsed dielectric barrier discharge plasma catalysis for CO2 hydrogenation at atmospheric pressure: Effects of Ni and Cu catalysts on the select18
Surface activation of thin polyvinyl alcohol films by atmospheric pressure plasma jet: Influence of electron temperature18
Gas‐phase peroxynitrite generation using dielectric barrier discharge at atmospheric pressure: A prospective sterilizer18
Diagnostics of a large volume pin‐to‐plate atmospheric plasma source for the study of plasma species interactions with cancer cell cultures17
Application of plasma‐activated water as an antimicrobial washing agent of fresh leafy produce17
Numerical study on interactions of atmospheric plasmas and vegetable oils by reactive molecular dynamic simulations17
Plasma medicine: The era of artificial intelligence17
Plasma ion implantation of 3D‐printed PEEK creates optimal host conditions for bone ongrowth and mineralisation17
Cold atmospheric plasma decontamination of SARS‐CoV‐2 bioaerosols16
Efficiency of plasma‐processed air for biological decontamination of crop seeds on the premise of unimpaired seed germination16
Plasma induced reactive oxygen species‐dependent cytotoxicity in glioblastoma 3D tumourspheres15
Plasma immersion ion‐implanted 3D‐printed PEEK bone implants: In vivo sheep study shows strong osseointegration15
Comparison of the performance of a microwave plasma torch and a gliding arc plasma for hydrogen production via methane pyrolysis15
Investigation on the electron density and temperature in a nanosecond pulsed helium plasma jet with Thomson scattering15
Effect of low‐pressure cold plasma on the properties of edible film based on alginate enriched with Dunaliella salina powder15
Plasma polymerization for biomedical applications: A review15
Enhancing composition control of alloy nanoparticles from gas aggregation source by in operando optical emission spectroscopy15
Investigation on the products distribution, reaction pathway, and discharge mechanism of low‐pressure CO2 discharge by employing a 1D simulation model14
Plasma catalytic technology for CH4 and CO2 conversion: A review highlighting fluidized‐bed plasma reactor14
Long‐term response of Norway spruce to seed treatment with cold plasma: Dependence of the effects on the genotype13
Cold plasma for insect pest control: Tribolium castaneum mortality and defense mechanisms in response to treatment13
On the selective killing of cold atmospheric plasma cancer treatment: Status and beyond13
Plasma‐deposited AgOx‐doped TiOx coatings enable rapid antibacterial activity based on ROS generation13
Production of carbon monoxide from a He/CO2 plasma jet as a new strategy for therapeutic applications13
Plasma‐treated liquids in medicine: Let's get chemical12
Comparison of HMDSO and HMDSN as precursors for high‐barrier plasma‐polymerized multilayer coating systems on polyethylene terephthalate films12
Mechanism study on gliding arc (GA) plasma reforming: A combination approach of experiment and modeling12
Atmospheric Pressure Plasma in Industrial Applications: Surface treatment of thermally sensitive polymers12
Validation of colorimetric assays for hydrogen peroxide, nitrate and nitrite ions in complex plasma‐treated water solutions12
Wetting behavior and stability of surface‐modified polyurethane materials12
Synergistic anticancer effects of different combinations of He+O2 plasma jet and doxorubicin on A375 melanoma cells12
Enhanced transmembrane transport of reactive oxygen species by electroporation effect of plasma12
Applications of plasma synthesized ZnO, TiO2, and Zn/TiOx nanoparticles for making antimicrobial wound‐healing viscose patches11
Hard silicon carbonitride thin‐film coatings produced by remote hydrogen plasma chemical vapor deposition using aminosilane and silazane precursors. 1: Deposition mechanism, chemical structure, and su11
Amine‐functionalized natural zeolites prepared through plasma polymerization for enhanced carbon dioxide adsorption11
Cold atmospheric plasma for addressing the COVID‐19 pandemic11
Nonthermal plasma‐generated ozone inhibits human coronavirus 229E infectivity on glass surface11
Insight into acetylene plasma deposition using molecular dynamics simulations10
Preparation and characterization of PCL‐grafted zein film via atmospheric‐pressure cold plasma pretreatment10
Nitrogen‐containing organic products from the treatment of liquid toluene with plasma‐activated N2 gas10
Insight into the plasma oxidation process during pulsed laser deposition10
Improvement of polymer properties for powder bed fusion by combining in situ PECVD nanoparticle synthesis and dry coating10
Electrical and reaction performances of packed‐bed plasma reactors moderated with ferroelectric or dielectric materials10
Hard silicon carbonitride thin‐film coatings by remote hydrogen plasma chemical vapor deposition using aminosilane and silazane precursors. 2: Physical, optical, and mechanical properties of deposited10
Investigation of NH4NO3 formation by air plasma and wasted ammonia10
Nebulized plasma‐activated water has an effective antimicrobial effect on medically relevant microbial species and maintains its physicochemical properties in tube lengths from 0.1 up to 1.0 m10
Antitumor effects of hyperthermia with plasma‐treated solutions on 3D bladder tumor spheroids10
Cold atmospheric plasma jet array for transdermal drug delivery10
Toward defining plasma treatment dose: The role of plasma treatment energy of pulsed‐dielectric barrier discharge in dictating in vitro biological responses10
Optimization of a gas–liquid plasma reactor for water treatment applications: Design guidelines and electrical circuit considerations9
Plasma‐activated Ringer's lactate solution inhibits the cellular respiratory system in HeLa cells9
Zebrafish larvae as a toxicity model in plasma medicine9
Study of the anticancer effects of a helium plasma jet combined with four anticancer drugs on 3D bladder tumour spheroids9
Electrochemical activation for sensing of three‐dimensional‐printed poly(lactic acid) using low‐pressure plasma9
The effect of nonthermal plasma on the oxidation and removal of particulate matter under different diesel engine loads9
Cost structure and resource efficiency of plasma processes9
Different methods of hydroxyapatite‐based coatings on external fixator pin with high adhesion approach9
Effects of hydrogen content in films on the etching of LPCVD and PECVD SiN films using CF4/H2 plasma at different substrate temperatures9
A review on the role of plasma technology in the nano‐finishing of textile materials with metal and metal oxide nanoparticles9
Plasma activation mechanisms governed by specific energy input: Potential and perspectives9
Effects of applied voltage waveform on the uniformity of a microplasma array confined inside polydimethylsiloxane microchannels9
The role of metals in the deposition of long‐lived reactive oxygen and nitrogen species into the plasma‐activated liquids9
Bactericidal effects of plasma‐activated saline prepared by surface dielectric barrier discharge with different dielectric layers and working gases8
Comparative analysis of hexamethyldisiloxane and hexamethyldisilazane plasma polymer thin films before and after plasma oxidation8
Plasma‐coated PCL scaffolds with immobilized platelet‐rich plasma enhance the wound healing in diabetics mice8
On the mechanisms of surface microdischarge plasma treatment of onychomycosis: Penetration, uptake, and chemical reactions8
Etching characteristics of hydrogenated amorphous carbon with different sp2/sp3 hybridization ratios in CF4/O2 plasmas8
Non‐OH‐driven liquid‐phase chemistry in water microdroplets8
Direct current gas–liquid phase pulsed plasma polymerization of polypyrrole under atmospheric pressure8
Evaluation of microbial species inactivation and purification of pond sewage by a custom‐built air surface discharge plasma8
Hybrid atmospheric pressure plasma generation and DC electrospray aerosolization of plasma‐activated water for surface pathogen disinfection8
Graphite production in two‐temperature non‐LTE plasmas of C4F7N and C5F10O mixed with CO2, N2, and O2 as eco‐friendly SF8
Impact of argon flow and pressure on the trapping behavior of nanoparticles inside a gas aggregation source8
Molecular growth paths and dust‐particles nucleation precursors in Ar/C2H2 low pressure discharges7
Time resolved study of ignition of microwave discharge in liquid hydrocarbons7
Effects of different cold atmospheric‐pressure plasma sources on the yeast Candida glabrata7
Study of plasma parameters and gas heating in the voltage range of nondischarge to full‐discharge in a methane‐fed dielectric barrier discharge7
Improvement of aerospace thermoplastic composite adhesion to coating with dielectric barrier discharge atmospheric pressure plasma surface treatment7
Modulation of uniform magnetic field on electron dynamics in low‐pressure capacitively coupled plasmas7
Control strategies for atmospheric pressure plasma polymerization of fluorinated silane thin films with antiadhesive properties7
Hydrophobic to superhydrophobic and hydrophilic transitions of Ar plasma‐nanostructured PTFE surfaces7
Removal of a mixture of antibiotics in water using nonthermal plasma7
Glycolytic inhibitor induces metabolic crisis in solid cancer cells to enhance cold plasma‐induced cell death7
Nitrogen fixation as NOx using air plasma coupled with heterogeneous catalysis at atmospheric pressure7
Unique combination of spatial and temporal control of maleic anhydride plasma polymerization7
Distinctive patterns and characteristics of neon jet launched from plasma candle device7
In‐situ plasma treatment of tomato and rice seeds in‐liquid to promote seed germination and seedling growth7
Discharge characteristics of atmospheric pressure pulsed microwave He/N2 plasma jet7
Cyclic etching of silicon oxide using NF3/H2 remote plasma and NH3 gas flow7
Machine Learning with Explainable Artificial Intelligence Vision for Characterization of Solution Conductivity Using Optical Emission Spectroscopy of Plasma in Aqueous Solution7
Synergies between polyacrylamide polymerization and nanoparticle generation using an atmospheric pressure plasma jet7
Non‐self‐sustained electron beam RF‐generated plasma in application for functional surface pretreatment7
The active role of organic molecules in the formation of long‐lived reactive oxygen and nitrogen species in plasma‐treated water solutions7
Inactivation effects of the mist nebulized with plasma‐activated air on Pseudomonas aeruginosa through the simulated respiratory tract7
Plasma for nitrogen fixation by using N2/O2 mixture: Reaction pathway, energy flow, and plasma reactor7
Commercialization of microcavity plasma devices and arrays: Systems for VUV photolithography and nanopatterning, disinfection of drinking water and air, and biofilm deactivation for medical therapeuti7
Low‐temperature reduction of SnO2by floating wire‐assisted medium‐pressure H2/Ar plasma6
Continuum modelling of an asymmetric CCRF argon plasma reactor: Influence of higher excited states and sensitivity to model parameters6
Surface modification of recycled polymers in comparison to virgin polymers using Ar/O2 plasma etching6
Fourier‐transform infrared spectroscopy of ethyl lactate decomposition and thin‐film coating in a filamentary and a glow dielectric barrier discharge6
Electrodeless discharge in water: Reactive species in liquid and gas phase and energy cost for nitrogen fixation6
Validation of in situ diagnostics for the detection of OH and H2O2 in liquids treated by a humid atmospheric pressure plasma jet6
Plasma polymers from oregano secondary metabolites: Antibacterial and biocompatible plant‐based polymers6
Gas‐phase chemistry and reactive‐ion etching kinetics for silicon‐based materials in C4F8 + O2 + Ar plasma6
Deposition of charged aerosols by E × B enhanced low‐temperature plasma jet array6
Silicon nanocrystal synthesis with the atmospheric plasma source HelixJet6
Hydrogen production in microwave discharge in water solutions of ethanol at atmospheric pressure6
Plasma‐based conversions with in situ product removal6
Identification of key neutral species in atmospheric‐pressure plasma for promoting proliferation of fibroblast cells6
The applications of cold atmospheric plasma in dentistry6
Real‐time measurement of axial temperature in a coaxial dielectric barrier discharge reactor and synergistic effect evaluation for in‐plasma catalytic CO2 reduction6
Preparation of TiO2 nanoparticles via cathode glow discharge electrolysis and its photocatalytic performance in the degradation of methylene blue6
Generation of neutral pH high‐strength plasma‐activated water from a pin to water discharge and its bactericidal activity on multidrug‐resistant pathogens5
Investigation of 3‐aminopropyltrimethoxysilane for direct deposition of thin films containing primary amine groups by open‐air plasma jets5
The temporal behavior of O atom of a nonequilibrium atmospheric pressure plasma driven by kHz nanosecond voltage pulses5
Validation of an indirect nonthermal plasma sterilization process for disposable medical devices packed in blisters and cartons5
Molecular dynamics simulation research on the interaction between plasma and living organisms: A comprehensive review5
Influence of surface activation on the microporosity of PE‐CVD and PE‐ALD SiOx thin films on PDMS5
Mutual interaction among multiple surface barrier discharges5
Cold plasma treatment of porous scaffolds: Design principles5
Ceramic‐hydrogel composite as carrier for cold‐plasma reactive‐species: Safety and osteogenic capacity in vivo5
Determination of electron properties of a helium atmospheric pressure plasma jet with a grounded metallic target5
Novel gas aggregation cluster source based on post magnetron5
Enhancement of metal adhesion, owing to the plasma texturing of PEEK5
Does plasma jet sintering follow an Arrhenius‐type expression?5
Effect of crosslinker on the wettability and mechanical properties of hydrophobic coatings deposited via atmospheric pressure plasma5
The industrial process for virucidal plasma coatings on textiles: From idea to upscaling5
Challenges in the deposition of plasma polymer nanoparticles using gas aggregation source: Rebounding upon impact and how to land them on a substrate5
Light emission from microwave discharges in liquid hydrocarbons at the initial stages of their development5
Novel corrosive behavior of titanium oxynitride film deposited on nickel–titanium alloy using cathodic cage plasma processing technique5
Insights into reactivity and bactericidal effects of water activated by He and Ar plasma jets5
A novel 3D in vitro tissue model for bone‐metastasized breast cancer: A preclinical tool in drug discovery and testing5
Soft polymerization of hexamethyldisiloxane by coupling pulsed direct‐liquid injections with dielectric barrier discharge5
Tuning the wicking and wettability properties of PET textiles by DBD or a remote atmospheric RF torch: A comparison5
Effect of direct plasma treatment and plasma‐treated liquid on cutaneous squamous cell carcinoma: A proof‐of‐concept study5
Plasma polymerization of biogenic precursors5
Patterned superhydrophobic surface fabrication by coupled atmospheric pressure RF and pulsed volume dielectric barrier discharges5
Atmospheric plasma activation and thin film deposition processes for adhesion improvement and corrosion resistance in the automotive industry5
Importance of higher‐level excited species in argon remote plasma sources: Numerical modeling with consideration of detailed chemical reaction pathways5
Highly spherical SiC nanoparticles grown in nonthermal plasma5
Spark discharges in liquid heptane in contact with silver nitrate solution: Investigation of the synthesized particles5
Permeation‐resistant and flexible plasma‐polymerised films on 2‐hydroxyethyl methacrylate hydrogels5
Improvement of the adhesive capacity of SBR for footwear outsoles by surface activation and coating deposition with atmospheric pressure plasma5
Spectral clustering algorithm for real‐time endpoint detection of silicon nitride plasma etching5
Adhesion improvement on the inner side of LLDPE/PA tubular film exposed to DCSBD roll‐to‐roll plasma system from the outer side of the film5
Influence of double bonds and cyclic structure on the AP‐PECVD of low‐korganosilicon insulating layers5
A novel Deal–Grove‐inspired model for fluorine‐based plasma jet etching of borosilicate crown optical glass4
Revisiting the surface characterization of plasma‐modified polymers4
Cold atmospheric pressure plasmas applications in dentistry4
Green and rapid fabrication of copper oxide in enhanced electrode liquid phase plasma system4
Promoting volatile organic compounds removal by a magnetically assisted nanosecond pulsed gear‐cylinder dielectric barrier discharge4
Parametric investigations on plasma‐activated conversion of CH4–CH3OH to C2–C4 alcohols by nanosecond pulsed discharge4
Tailoring electric field signals of nonequilibrium discharges by the deep learning method and physical corrections4
Effect of dielectric parameters on the transformation of operation mode and the energy cost of nitrogen fixation of surface microdischarge in air4
Characteristics of liquid‐phase continuous arc discharge plasma4
Damage of SARS‐CoV‐2 spike protein by atomic oxygen of cold atmospheric plasma: A molecular dynamics study4
Complicated streamer dynamics in petal‐like patterns formed on the substrate downstream of an argon plasma jet4
The investigation of RONS permeation in plasma‐activated oil–water mixed system4
Molecular dynamics simulations of reactive neutral chemistry in an argon‐methane plasma4
Two‐dimensional analysis for the transition from nonlocal to local electron kinetics and its effect on the spatial uniformity of a capacitively coupled plasma4
An effective method to optimise plasma immersion ion implantation: Sensitivity analysis and design based on low‐density polyethylene4
Nonthermal plasma in the induction of polycondensation processes and intermolecular dehydrochlorination of chloroethanes in the liquid phase4
PECVD and PEALD on polymer substrates (part I): Fundamentals and analysis of plasma activation and thin film growth4
A review of polymer surface modification by cold plasmas toward bulk functionalization4
Effect of electrode configurations on the characteristics of the ring–ring typed atmospheric pressure plasma jet and its modification on polymer film4
Plasma‐electrified postharvest preservation of Citrus sinensis: Process technology and freshness‐keeping and anticorrosion effects4
Comparative analysis of the germination of barley seeds subjected to drying, hydrogen peroxide, or oxidative air plasma treatments4
Co‐Ni/MOF‐74 catalyst packed‐bed DBD plasma for ammonia synthesis4
Plasma‐enhanced evaporation and its impact on plasma properties and gaseous chemistry in a pin‐to‐water pulsed discharge4
Nanoporous SiOx plasma polymer films as carrier for liquid‐infused surfaces4
A poly‐diagnostic study of the shield gas‐assisted atmospheric pressure plasma jet propagation upon a dielectric surface4
Organosilica coating layer prevents aging of a polymer with intrinsic microporosity4
Growth and treatment of hydrogenated amorphous carbon nanoparticles in a low‐pressure plasma4
Plasma polymer for enhancing adhesion bonds of a metal/elastomer assembly4
Molecular understanding of the possible mechanisms of oligosaccharide oxidation by cold plasma4
Rational approaches for optimizing chemical functionality of plasma polymers: A case study with ethyl trimethylacetate4
4
Improving electrochemical sensitivity of screen‐printed carbon electrodes by atmospheric pressure plasma jet treatment and electrochemical detection of dopamine4
High‐aspect‐ratio oxide etching using CF4/C6F12O plasma in an inductively coupled plasma etching system with low‐frequency bias power4
Mechanism study on gliding arc (GA) plasma reforming: Unraveling the decisive role of CH4/CO2 ratio in the dry reforming reaction4
The effect of different cold atmospheric plasma sources and treatment modalities on the generation of reactive oxygen and nitrogen species in water4
Nonthermal tetravinylsilane plasma used for thin‐film deposition: Plasma chemistry controls thin‐film chemistry4
Interplay between nitrogen oxides and ozone in a filamentary dielectric barrier discharge at various frequencies4
Ag nanoparticles immobilized on C:H:N:O plasma polymer film by elevated temperature for LSPR sensing3
Disinfection of viruses with cold atmospheric‐pressure plasmas: Sources, mechanisms, and efficacy3
Efficient trapping of RONS in gelatin and physiological solutions3
Opinions from five oral specialists on 3D printing in the challenge of customized oral healthcare. What can plasma technology bring?3
Characterization of N‐doped carbon quantum dots synthesized by DBD‐based cold atmospheric pressure plasma jet3
Organic decomposition and synthesis reactions in lactated solution exposed to nonequilibrium atmospheric pressure plasma3
Scenario of carbon‐encapsulated particle synthesis by spark discharges in liquid hydrocarbons3
High reactivity and bactericidal effects of plasma‐activated mist from hydrogen peroxide solution3
Modelling the dynamics of hydrogen synthesis from methane in nanosecond‐pulsed plasmas3
Enhancement of the drug sensitization of cancer cells by plasma‐activated saline3
Treatment of phenylalanine and tyrosine in phosphate‐buffered saline by plasma‐supplied oxygen atoms: Chemical characterization and bactericidal effects3
Degradation of gemfibrozil in aqueous solutions by gas–liquid dielectric barrier discharge plasma combined with CNTs/γFe2O33
Enhanced gas‐phase nucleation of diamond nanoparticles in a microplasma torch3
ReaxFF‐based molecular dynamics simulation of the interactions between OH radicals in plasma and succinate dehydrogenase in cancer cell mitochondria3
In‐liquid plasma synthesis of iron–nitrogen‐doped carbon nanoflakes with high catalytic activity3
Influence of humidity on the plasma‐assisted CO2 conversion3
Atmospheric plasma dielectric barrier discharge: A simple route to produce superhydrophilic TiO2@carbon nanostructure3
Aerosol‐assisted open‐air plasma deposition of acrylate‐based composite coatings: Molecule release control through precursor selection3
Electrochemical behavior of oxazoline‐based plasma polymers for biosensing applications3
Atmospheric‐pressure plasma actuators: Enhancement of the free charges' transport mechanism3
Industrial plasma applications3
Plasma‐driven biocatalysis: In situ hydrogen peroxide production with an atmospheric pressure plasma jet increases the performance of OleTJE when compared to adding the same molar amount of3
Surface tailored graphite–polymer composite electrodes through cold plasma for electrochemical applications3
Insights into the low‐temperature deposition of a dense anatase TiO2 film via an atmospheric pressure pulse‐modulated plasma3
The effect of cold plasma seed treatments on nodulation and plant growth in pea (Pisum sativum) and lentil (Lens culinaris)3
Comparison of direct and indirect low‐temperature plasma triggering immunogenic cell death in B16F10 melanoma3
Plasma deposition of a stable SiOx‐like layer on copper surface for enhanced pool boiling heat transfer performance: A combination of microstructures and wetting properties3
Efficient CH3OH formation on H2/Ar plasma‐treated CoO sites for CO2 + H2 + H2O DBD system3
Synthesis of thin‐film materials using nonthermal plasma at a higher degree of dissociation3
Operation mode recognition of surface microdischarge based on the gray level histogram3
Comparison of the anticancer effects between helium plasma jets and electrochemical treatment (EChT)3
Low‐temperature plasma‐jet‐activated medium inhibited tumorigenesis of lung adenocarcinoma in a 3D in vitro culture model3
Comparative study of touchable plasma devices on transdermal drug delivery3
Structure of plasma‐deposited copolymer films prepared from acrylic acid and styrene: Part III sulfonation and electrochemical properties3
Hygroscopic fluorine‐doped silicon oxide thin‐film‐based large‐area three‐layered moisture barrier using a roll‐to‐roll microwave plasma‐enhanced chemical vapor deposition system3
Molecular dynamics simulations of cancer cell membrane electroporation under the plasma electric field effect3
Two‐dimensional particle‐in‐cell/Monte Carlo simulations of streamer formation and propagation in catalyst pores in a surface dielectric barrier discharge3
Effect of cold plasma treatment and plasma‐activated water on physicochemical and structural properties of starch: A green and novel approach for environmental sustainability3
Oral SARS‐CoV‐2 reduction by local treatment: A plasma technology application?3
Eucalyptus globulus essential oil thin film polymerized by cold plasma on Ti6Al4V: Sterilization effect, antibacterial activity, adhesion, and viability of mesenchymal stem cells3
Monitoring of nonthermal plasma degradation of phthalates by ion mobility spectrometry3
Discharge aspects of a snake‐like plasma plume generated by an atmospheric pressure plasma jet with variable argon flow rate3
High‐performance rollable polymer/metal/polymer thin‐film heater and heat mirror3
Investigating the effect of atmospheric plasma on protein fibrinogen: Spectroscopic and biophysical analysis3
Analysis of the effects of complex electrode geometries on the energy deposition and temporally and spatially averaged electric field measurements of surface dielectric barrier discharges2
Cuboid Cu(HBTC)(H2O)3 synthesis via plasma pretreatment of trimesic acid solution2
A nonequal gap distance dielectric barrier discharge: Between spiral‐shaped and cylinder‐shaped electrodes2
Plasma activated liquid synergistically enhances response to radiation for improved cancer therapy2
0.16108202934265