OOIR: Observatory of International Research

Papers

(The TQCC of Macromolecular Research is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)

Article	Citations
Characterization of rheological behavior and barrier property of PET bottle blended with silica–polystyrene nanocomposites	101
Synthesis of a cysteine Diels–Alder-based polymer by simultaneous double-click chemistry and its cyto-genotoxicity evaluation	33
Tuning the distribution of carbon nanotubes in styrene–acrylonitrile copolymer by a small amount of polycarbonate	33
In situ silica-bridged nanophase hybrid ionogel polymer electrolytes for high-energy flexible supercapacitors	31
Effect of chemical structural properties of chitooligosaccharides on the immune activity of macrophages	31
Retraction Note: Porous Zn(II)-organic framework with tetrazolyl decorated pores for selective C2H2 adsorption and treatment activity on infantile meningitis	29
Synthesis and characterization of hyperbranched thiol hardener and their curing behavior in thiol–epoxy	28
Simple fabrication of PEDOT: PSS-based microfiber organic electrochemical transistors for neuromorphic memory applications	26
Low energy irradiation induced effects on the surface characteristics of polydimethylsiloxane polymeric films	25
Unveiling novel grub-style pentacene crystals driven by hierarchical self-assembled crystallization	25
Thienoquinolinone-based acceptor-π-acceptor-type building block for polymer donors in organic solar cells	25
Surface-engineered electrospun PVA–CMC–SA/CuO–MXene fiber nanocomposites with enhanced thermal stability, antimicrobial activity and tunable dielectric performance	25
Analysis of thermomechanical and dynamic characteristics of treated saccharum munja fiber polymer composite	25
Porous, polyacrylonitrile-based, nanofibrous adsorbent fabricated by electroblow spinning for uranium recovery from seawater	24
Retraction Note: Sulfonated polysulfone proton exchange membrane with flexible side chains for fuel cells	23
Hierarchical chitosan/polyvinyl alcohol/polyethylene glycol/nonwoven fabric micro/nanofiber composite membrane: a potential biomaterial for wound dressing	23
Transparent superhydrophobic silica nanostructures for high-performance liquid–solid triboelectric nanogenerators	23
Erratum: Superamphiphobic PDMS/silica nanoparticle surfaces with high liquid impact resistance: effect of structural hierarchy on superamphiphobicity	23
Grafting of perylene and naphthalene fluorophores onto chitosan for improved thermal, optical and electrical properties	22
Uniform Li+ transport in a flame-retardant 3D crosslinked gel polymer electrolyte for safe lithium metal batteries	22
Performance evaluation of usnic acid delivery via poloxamer 108-mediated nanomicelles in human lung cancer cells	21
Extraction of active components from the bark of Fraxinus Rhynchophylla and their encapsulation	21
A Self-powered Kinetic Motion Sensor Fabricated from Electrospun MOF-5/PVDF-TrFE Composites Piezoelectric Nanogenerators	20
Oligoetherols and polyurethane foams based on cyclotriphosphazene of reduced flammability	19
Controlled synthesis and optical investigation of conjugated rod-coil diblock copolymer based on poly(3-hexylthiophene) and poly(2-(dimethylamino)ethyl methacrylate-random-1-pyrenylmethyl methacrylate	19

Synthesis and anti-fouling properties of zwitterionic poly(l-glutamic acid)	18
pH-responsive acrylic resin for the sustained release and cellular imaging of rhodamine-nido-carborane fluorescent complexes	18
Photothermal alginate hydrogels bearing polyaniline nanoparticles prepared via a film dispersion process	17
Biomimetic Calcium Phosphate Coated Macro-Microporous Poly(ε-caprolactone)/Silk Fibroin (PCL/SF) Scaffold for Bone Tissue Engineering	17
High-stability flexible body motion monitoring sensor based on waterborne polyurethane-coated conductive warp-knitted fabric	17
Research progress of functional atomic force microscopy at the interface of polymer nanocomposite dielectrics	17
MPEG-phenylboronic acid modified doxorubicin as the efficient pathological pH-responsive nanoplatform for potential anti-cancer delivery	17
Synthesis of nanomagnetite/copper oxide/potassium carrageenan nanocomposite for the adsorption and Photo-Fenton degradation of Safranin-O: kinetic and thermodynamic studies	17
Pectin purification from plant materials	16
Preparation of polypyrrole by chemical oxidation: applications for sensor studies	16
An injectable thermos-sensitive hydrogel for sustained release of α-Mangostin promotes MRSA-infected wound healing in mice	16
Thermo and pH-Responsive Poly(DEGMA-co-OEGMA)-b-Poly(DEAEM) Synthesized by RAFT Polymerization and Its Self-Assembly Study	16
Dual stimuli-responsive polymeric prodrug consisting of reversible covalent bonded celastrol for tumor targeted delivery	16
Promoted biodegradation behavior of poly(L-lactic acid) in seawater conditions through blending amorphous polyhydroxyalkanoate	16
Preparation of Polypropylene Organically Modified Clay Nanocomposites with Enhanced Physico-Chemical Properties	15
Highly tough, colorless, transparent polyamide-imide films from one reaction vessel without purification	15
Development of active PLA/PEG-blended film with grape seed extract for straw mushroom shelf life extension	15
Preparation, structural characterizations and surface studies of irradiated flexible PPy/Fe2O3/PET polymer nanocomposite films for dielectric applications	14
Characterization of mechanical, thermal and rheological properties of silica-based nanocomposite filled thermoplastic polyurethane film	14
Formation of substrate-independent antifouling coatings using a tyrosine-conjugated trimethylamine N-oxide derivative (Tyr-TMAO)	14
Amphiphilic A3B3 miktoarm star polymer: synthesis and micellization study by fluorometry, TEM and DLS techniques	14
Effect of waste PET blending on the physical and chemical characteristics of activated carbons	14
Morphology-dependent uranium extraction from seawater by PAN-based fibrous adsorbents	13
Non-invasive wearable sensors for monitoring plant health	13
Dispensing‐printed graphene + CNT for source/drain electrodes in organic thin‐film transistors	13
Surface engineering of zirconia with abaloparatide and nano-hydroxyapatite for synergistic osteogenic activity	13
Solvent engineering and vacuum annealing synergy for efficient ambient inkjet-printed PHOLEDs	13
Interfacial wetting-controlled encapsulation of inorganic colloids by crosslinked Poly(ethylene glycol) (PEG) hydrogels	13
Synthesis and characterization of phosphonium-based ionic liquid anchored graphene functionalized ZnAl-ldh nanocomposite for polystyrene applications	13
Chemical recycling via precision depolymerization: fundamentals, design principles, and emerging frontiers for circular polymer systems	13
Polyacrylamide-based nanocomposite hydrogel prepared by synergistic solar light-induced polymerization	13
Effect of carbon nanotube length on thermal conductivity of SWNT/PVA composites	12
Photocatalytic performance of copper ferrite/polypyrrole nanohybrids: studies on visible light induced degradation of urea and microwave-assisted degradation of polyethylene films	12
Bio-inspired photothermal nanocomposites: melanin-rich cuttlefish ink embedded in porous PDMS for solar vapor generation	12
Effect of compound coupling agent treatment on mechanical property and water absorption of hollow glass microspheres/epoxy composite	11
Hyaluronic acid-based biodegradable microneedles loaded with epidermal growth factor for treatment of diabetic foot	11
Application of a moldable and biocompatible acellular dermal matrix sponge scaffold for tissue regeneration	11
PEDOT:PSS-based high-performance thermoelectrics	11
Microrheological study of PVA–borax physical gel: effects of charge screening	11
Polymer-induced surface wrinkling and imine polymer-based doping of sol–gel zinc oxide in electrolyte-gated transistors	11
Injectable mesquite gum and carboxymethyl chitosan hydrogel using schiff base crosslinks: a versatile platform for drug delivery in wound care	11
Environmentally friendly non-isocyanate polyurethane binder for pigment dyeing	11
Electrochemical sensor for the detection of mercury in seawater using carbon dots–carboxymethyl chitosan hydrogel	11
Waterborne acrylic/CaCO3 composite coatings for eco-friendly passive radiative cooling with hydrophobic easy-cleaning	11
Enhanced physico-mechanical properties of EVA/PA blends via electron beam irradiation and vinyl acetate content	11
Bioactive 3D printed scaffolds functionalized with polydopamine and PDRN for bone regeneration	11
Phenylboronic acid-functionalized gelatin–oleic acid nanoparticles for high loading and efficient transdermal delivery of Celastrol towards the treatment of psoriasis	11
NIR-transparent dark paints based on diketopyrrolopyrrole pigments for LiDAR-enabled automobiles	11
Simulation of micro-triangle flow field in spinning solution and investigation on PEO/PVP composite fibers morphology	10
Retraction Note: Hollow fiber membrane contactor based carbon dioxide absorption − stripping: a review	10

Multidimensional culture system for SH-SY5Y cells on microwell patterns regulated by the ROCK signaling pathway	10
Production of novel activated carbon fibers from smoked cigarette wastes using NaOH	10
On the possibility of obtaining soft dosage forms based on polyanionic polysaccharides with prolonged yield of drugs	10
Drug release and physical properties of double layers coated contact lenses using natural polymers	10
Seaweed polysaccharides-based gel to contest foot odour	10
Experimental and computational investigations on ring-opening polymerization mechanisms of amide-functional benzoxazines	9
Correlation between solvent composition and materials properties of organohydrogels prepared by solvent displacement	9
Mapping the structural and functional profile of hyaluronic acid hydrogels: a comparative physicochemical analysis	9
Hydrogel-based wet adhesive with enhanced adhesion and stretchability	9
Diazinon removal from aqueous solution via grape branch-derived cellulose nanocrystals/polyethersulfone nanocomposite membrane: performance, characterization, and modeling	9
Preparation of oral nanoemulsion drug delivery system loaded with punicalagin: in vitro antibacterial activity, drug release, and cell safety studies	9
Janus evaporators comprising Cu nanoparticle-decorated carbon nitride/polydimethylsiloxane nanocomposites coated on melamine foam for photothermal water evaporation	9
Nano-engineered monoclonal antibodies expanding the newer avenues for cancer targeting	9
Studies on polyethylene glycol crosslinked chitosan nanoparticles for co-delivery of docetaxel and 5-fluorouracil with synergistic effect against cancer	9
Functionally substituted derivatives of novel thiourea and phenylthiourea as potent aldose reductase, α-amylase, and α-glycosidase inhibitors: in vitro and in silico studies	9
Biocomposite materials with polysaccharide coating containing covalently bound vancomycin, tenoxicam and hyaluronic acid nanoemulsion in the treatment of rat experimental osteomyelitis	9
Calixarenes as Host Molecules for Drug Carriers in the Cosmetic and Medical Field	9
Response surface method (RSM) for optimization of electrical properties of polymer/CdS composites for dielectric capacitors	9
Photocatalytic degradation of crystal violet and benzimidazole using Ag-CoFe2O4 and its composite with graphitic carbon nitride	9
Enhancing the thermal conductivity of epoxy molding compounds by adding SiO2-embedded carbon nanofibers for semiconductor packaging applications	9
Retraction Note: Synergy of propylene-based copolymer in high-melt-strength polypropylene for extrusion foaming process	8
N-oxide-based zwitterionic polymer brushes for highly effective antifouling surfaces	8
BDT-based donor polymer for organic solar cells to achieve high efficiency over 15% for ternary organic solar cells	8
Local enhancement of concentration gradient through the hydrogel-functionalized anodic aluminum oxide membranes for osmotic power generation	8
Rapid synthesis of biocompatible alginates for adsorption of chemical warfare agents	8
A comprehensive review on next-gen electrospun nanofibers for multidirectional applications from energy storage to precise medicine	8
Enhanced photostability of polyvinyl chloride films through antipyrine derivatives: a comprehensive study on UV resistance and degradation inhibition	8
Retraction Note: Experimental Investigation of the Hybrid Epoxy-Silane Coating for Enhanced Protection against the Corrosion of Aluminum Alloy AA7075 Frame in Solar Cells	8
A new linear heptafluoro glycidyl ether binder: synthesis, characterization, and mechanical properties	8
Adsorbing odor via antibacterial activated carbon fiber derived from waste textiles	8
Fabrication of graphene oxide infused natural polymers-based super absorptive self-healing foam dressing using quality by design approach	8
Synthesis of 4-hydroxybenzaldehyde-functionalized chitosan Schiff base/hydroxyapatite composite for basic red 2 dye removal: characterization and adsorption optimization using Box–Behnken design	8
Erratum: Spermine Modified PNIPAAm Nano-Hydrogel Serving as Thermo-Responsive System for Delivery of Cisplatin	8
Effect of surface morphology on the drug release in temperature responsive poly(N-isopropylacrylamide) hydrogel film through a high surface area patterned film	8
Synthesis and anode properties of co-oligomers containing 3,4-diphenyl-1,1-disubstituted-2,5-silolene and ethynylene for lithium-ion secondary batteries	8
Poly(D, L-lactic-co-glycolic acid)-based microspheres loaded with camphor regulate skeletal muscle atrophy	7
Oxygen-generating gelatin-based cryogels for enhanced hemostasis and skin wound healing	7
Optical modeling of top-emitting micro-OLEDs	7
Research progress of enzyme-like behavior nanoparticles in tumor treatment	7
Enhanced antimicrobial property of polyurethane fibers bearing nanoparticles of polyacrylic acid-grafted oleyl amine and zwitterion	7
Sustained Release of Doxorubicin through Semi-Interpenetrating Polymer Network-Stabilized Micelles	7
Cosmetic delivery system for mulberry root extract emulsions	7
Fabrication of calcium alginate/gum arabic/egg shell composite microbeads for adsorptive removal of methylene blue dye from aqueous solutions	7
Synergistic enhancement of electrical–thermal–mechanical properties of silicone rubber composites by different ZnO: based on molecular dynamics	7
Load bearing investigations on lightweight rubber seed husk cellulose–ABS 3D-printed core and sunn hemp fiber-polyester composite skin building material	7
FGF-7 treatment accelerates wound healing in concentration-dependent manner by regulating TGF-β1 and VEGF expression	7
Preparation, characterization, and properties of lutein block polyethylene glycol copolymer loading with lutein nanoparticles	7
α-Aminophosphonates-functionalized poly(p-Hydroxystyrene): synthesis, characterization, DFT simulations, assessment of their antimicrobial and anticancer efficacy	7