Structure and Infrastructure Engineering

Papers
(The median citation count of Structure and Infrastructure Engineering is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Uncertainty quantification in the strain response of prestressed reinforced concrete structures using fractile based sampling32
Probabilistic multi-objective optimum combined inspection and monitoring planning and decision making with updating29
An adaptive hybrid dimension-reduction model and its application for statistical moments estimation of stochastic systems and reliability analysis of structures28
Dynamic performance-based assessment for tied-arch bridges subjected to heavy multi-axial tractor-trailers27
A large-scale prioritisation to strengthen the resilience of communities in Italian territorial contexts26
Experimental study on seismic performance of steel-hinged modular expansion joints for highway bridges26
A data-driven risk assessment of vehicles traversing long-span sea-crossing bridges accounting for rainfall effect25
Reliability analysis of deteriorated post-tensioned concrete bridges considering bond effect: the case study of Ynys-y-Gwas bridge in UK25
Improvement of inspection and maintenance gantries in the Honshu Shikoku Bridges25
Machine learning classifier-based dynamic surrogate model for structural reliability analysis24
On the vertical coupling effect of ballasted tracks in multi–span simply–supported railway bridges under operating conditions24
An open-source GIS app for digitalising bridge inspections and automating BIM model integration24
Seismic vulnerability assessment of ageing reinforced concrete structures under real mainshock-aftershock ground motions23
A novel multiple analysis method for assessing seismic deformations of GRS walls: combinations of FEM, machine learning and performance-based fragility curves23
Enhancing infrastructure planning and design through BIM-GIS integration22
Assessment and mitigation of railway-induced environmental vibrations over underground comprehensive transportation hub21
Decision support and structural assessment of a corroding reinforced concrete bridge considering new information21
Structural performance of hammerhead pier under eccentric loads: strut-and-tie modeling, finite element method, and full-scale experimental study20
Experimental study on the flexural behaviour of corroded concrete beams reinforced with hybrid steel/GFRP bars20
Challenges in the application of digital transformation to inspection and maintenance of bridges19
Digital Twin-driven framework for fatigue lifecycle management of steel bridges19
Fourier regression model predicting train-bridge interactions under wind and wave actions18
Mechanical characteristics analysis of the orthotropic steel deck in heavy-haul railway bridges17
Fragility analysis of an ultra high voltage transmission tower in saline soil subjected to wind loads17
Verifying the suitability of uncoupled numerical methods for solving vehicle-bridge interaction problems17
Bridge life consumption by permit vehicles17
Study on the buffeting response of a long-span truss arch bridge during construction based on a large-scale full bridge model wind tunnel test17
Asset management for storm surge barriers: how and why?16
An explicit approach for modeling the performance of transportation networks immediately after an earthquake16
Risk-informed design and safety assessment of structures in a changing climate: a review of U.S. practice and a path forward16
Prediction of corrosion-induced retraction slip of prestressing strand in pre-tensioned concrete beams16
Dynamic analysis of a pedestrian bridge using monitoring and computational techniques15
Detecting and localising damage based on image recognition and structure from motion, and reflecting it in a 3D bridge model15
Assessment of post-earthquake resilience of highway–bridge networks by considering downtime due to interaction of parallel restoration actions15
Application of clustering algorithms for dimensionality reduction in infrastructure resilience prediction models15
Review of seismic evaluation frameworks for highway bridges based on life cycle concepts15
Multi-hazard stochastic response assessment of base-isolated buildings15
Normalising flow-based vehicle load modeling for bridges14
Automated Bayesian modal identification for full-scale transmission towers by comprehensive field tests14
Numerical analysis-based structural behavior assessment of a cable-stayed bridge under tanker fire14
Time-dependent deviation of high-speed railway bridge pier-cap-pile foundations in deep soft soils under surcharge loads: a case study13
Deep convolutional neural network ensemble for pavement crack detection using high elevation UAV images13
Influence of the wind tunnel model characteristics on the loading and response of cable-net hyperbolic paraboloid roofs13
Dynamic characteristics and force analysis of box girder under tsunami action based on level-set method13
Inconsistency recovery and assessment for crack data of steel box girders13
A new methodology for estimating seismic resilience of buildings under successive damage-retrofit processes during the recovery time13
Computer vision-based crack width identification using F-CNN model and pixel nonlinear calibration12
Establishment and application of a fatigue crack database for steel box girders12
Theoretical prediction of the shear strength of reinforced concrete slabs under concentrated loads close to linear supports12
An interpretable model for bridge scour risk assessment using explainable artificial intelligence and engineers’ expertise12
Simulation of concrete structures deformation affected by alkali–silica reaction considering environmental conditions and multiaxial stress state12
Structural health assessment of concrete half-joint bridges: from load testing to FEM simulation accounting for material uncertainties11
Bridge structural safety assessment: a novel solution to uncertainty in the inspection practice11
Framework for rational decision-making in bridge maintenance11
A network model to optimally group road maintenance interventions for work zone development11
Geometrical morphology and deformation measurement of long-span suspension bridge based on terrestrial laser scanning11
Structural performance degradation of cable-stayed bridges subjected to cable damage: model test and theoretical prediction10
An unsupervised learning algorithm for computer vision-based blind modal parameters identification of output-only structures from video measurements10
Sustainable pavement maintenance and rehabilitation planning using the marine predator optimization algorithm10
Numerical analysis of buried pipelines under seismic slope instability10
Efficient design of truss footbridges with stiffness-proportional inerters10
Friction stir welded joints in aluminum highway bridge decks: a quality control framework10
Assessment of bond deterioration in corroded RC members incorporating cracking response and tension stiffening10
A rapid neural network-based demand estimation for generic buildings considering the effect of soft/weak story10
Reliability-based reinforcement learning driven maintenance policy optimization10
Assessing the condition state of a concrete bridge combining visual inspection and nonlinear deterioration model9
Crosswind effects on a train-bridge system: wind tunnel tests with a moving vehicle9
A framework for assessing the remaining life of storm surge barriers9
Crack-controlled allowable forces for high-strength reinforced concrete columns under cyclic loading using finite element analysis9
Development of requirements for design and steps for protection of the environment, illustrated by two major bridge projects in Denmark9
Partially restrained seismic isolation system to retrofit a continuous girder RC bridge9
Safety and comfort assessment of a train passing over an earthquake-damaged bridge based on a probability model9
Design, construction and monitoring of continuous curved box girder bridge during bearing replacement-case study9
An application of convolutional neural network for deterioration modeling of highway bridge components in the United States9
Experimental and numerical investigation on wave impacts on box-girder bridges9
Pier-bents parameterized seismic fragility analysis for regional simply-supported girder bridges based on multi-layer perceptron structural demand models9
Probabilistic pre-estimation of life-cycle costs of road bridges using dynamic Bayesian networks9
Progressive collapse and robustness of modular high-rise buildings8
Effect of prevalent irregular configuration of infills on the seismic collapse of Indian RC buildings8
A preliminary investigation of the potential benefits of using the ASTRA Bridge for short-span bridge deck refurbishment projects in Switzerland8
Deflection prediction model for bridge static load test based on artificial neural networks8
Climbing robot-assisted quantitative identification of sheath surface defects of stay cables8
Seismic behavior and collapse fragility of long-span truss structures in ultra-high voltage substations under multi-directional earthquakes8
Multihazard life-cycle cost optimization of active mass dampers in tall buildings8
A novel high-speed railway large-span cable-stayed bridge with deformation active control function: structural system and control algorithm8
Shear strength of pretensioned concrete T-girders: a combined stress field model and experimental investigations8
Train-track-bridge interaction effects on highly skewed girder bridges of short-to-medium spans for increasing operating speeds8
A two-stage framework for automated operational modal identification8
Effect of pinching on structural resilience: performance of reinforced concrete and timber structures under repeated cycles7
Developing and evaluating a risk-informed decision support system for earthquake early warning at a railway bridge7
Development and comparison of seismic fragility curves for bridges based on empirical and analytical approaches7
Diagnostic load testing and assessment of a corroded corrugated metal pipe culvert before rehabilitation7
Identification of waterways maintenance significant units using secondary data and Multi-Attribute Utility Theory7
Fatigue reliability assessment and life-cycle cost analysis of roadway bridges equipped with weigh-in-motion systems7
Seismic fragility estimation considering field inspection of reinforced concrete girder bridges7
Numerical model for time-dependent cracking and deflection of large-span concrete bridge structures7
Numerical study on the seismic performance of precast UHPC bridge columns considering the buckling behavior of replaceable energy dissipaters7
Seismic control of a long-span triple-tower suspension bridge using hysteretic steel damper7
Experimental investigation on the flexural behaviour of stainless steel reinforced concrete beams7
Effects of galvanostatic and artificial chloride environment methods on the steel corrosion spatial variability and probabilistic flexural capacity of RC beams7
Experimental study on longitudinal seismic damage progress and failure mode of a three-tower extradosed bridge7
A hybrid genetic algorithm to maintain road networks using reliability theory7
Assessment of plastic hinge length in reinforced concrete columns7
Damage detection for bridge structures under vehicle loads based on frequency decay induced by breathing cracks7
Experimental and numerical investigation on low-strength RC beams strengthened with side or bottom near surface mounted FRP rods7
Damage identification in cable-stayed bridges based on the behavior of neutral axis under traffic loading7
Evaluating the dynamic response and damage resistance of a cable-stayed prestressed concrete bridge under above-deck blast7
Bearing capacity and failure behavior of segments with a mid-span opening of a shield subway tunnel7
Pedestrian-induced lateral vibration of footbridge based on binary coupled Kuramoto model7
A unified approach for vertical vibration of suspension bridge systems7
Probabilistic corrosion hazard maps for reinforced concrete infrastructure in coastal regions7
Probabilistic service life assessment of corroded concrete structures: a state-of-the-art review7
Post-fire performance of GFRP reinforced concrete deep beams: experimental and numerical study7
Fatigue reliability assessment of steel bridges considering spatial correlation in system evaluation7
Resilience-based post-earthquake restoration scheduling for urban interdependent transportation-electric power network7
Study of residual load carrying capacity of steel bridges considering fatigue damage during service time6
Failure mechanism and load carrying capacity of an arched partially CFST bridge tower considering different concrete filling lengths6
The impact of Jin Mao Tower on life-cycle civil engineering of tall buildings6
Life-cycle connectivity-based maintenance strategy for bridge networks subjected to corrosion considering correlation of bridge resistances6
Automatic detection of falling hazard from surveillance videos based on computer vision and building information modeling6
Comparison of the service life, life-cycle costs and assessment of hybrid and traditional reinforced concrete through a case study of bridge edge beams in Sweden6
Estimation of safe cover thickness to steel reinforcement in coastal structures addressing several tidal stations6
Failure modes-based seismic fragility analysis of concrete gravity dams considering concrete heterogeneity6
Seismic performance enhancement of brick masonry walls by retrofitting with nominal RC bands: a study of diagonal compression tests6
Experimental investigation on rehabilitation effectiveness of ductile RC beams with various seismic damage levels using dynamic and static-cyclic loading protocols6
Probabilistic seismic assessment of reinforced concrete bridges using simulated records6
Earth pressure model to predict the long-term performance of integral abutment bridge6
Methodology for calculating the severity index of buildings6
Structural health assessment techniques for in-service timber poles6
Multi-hazard analysis and design of structures: status and research trends6
Influence of vehicular movement on the seismic response and fragility of highway bridge structures6
A decision-making framework for school infrastructure improvement programs6
A novel formula for plastic hinge length of reinforced concrete columns in seismic regions6
Integrated neural networks – Particle Swarm Optimization for probabilistic finite element model updating: application to a prestressed concrete girder bridge6
Influence of the correlation model on the failure probability of a reinforced concrete structure considering spatial variability6
Structural system reliability assessment using generalized factorized dimensional reduction method and iterative maximum entropy method6
Performance evaluation and repair strategy of seismic damages to RC structures based on residual deformation5
Twinning of the Egongyan Bridge5
Life-cycle cost analysis of pile-supported wharves under multi-hazard condition: aging and shaking5
Identification, tracking and warning of vortex induced vibration using k-means clustering method5
Shaking table test to investigate the size effect on the seismic response of a low-cost friction pendulum system5
Numerical and analytical studies of flexural behaviour of prestressed UHPC joints5
Linear and nonlinear axial behaviour of internal replacement pipe systems for pipeline rehabilitation5
Determining effective earthquake countermeasures for bridges considering seismic and tsunami hazards based on expected post-disaster recovery time5
Dynamic response of cable-stayed bridge under wind-wave-current action considering pile-soil interaction5
Uncertainty quantification of structural displacement based on multi-response surfaces method for a long-span concrete cable-stayed bridge with damages5
Development and challenges in finite element modelling of post-installed anchors in concrete5
Seismic optimization of high-speed railway bridges considering the running safety of trains in normal service5
Long-term deformation analysis of prestressed concrete bridges under ambient thermal and vehicle loads5
Progressive collapse of steel frame-type structures using the pseudo -dynamic method: experimental testing and numerical validation5
Detection, localisation and quantification of stiffness loss in a bridge using indirect drive-by measurements5
A closed-form solution to time-dependent reliability of aging structures described by gamma-based deterioration models5
Added value of monitoring for the maintenance of a reinforced concrete wharf with spatial variability of chloride content: a practical implementation5
Seismic collapse safety assessment of suspended zipper-braced frames5
A comparison of the UK and Italian national risk-based guidelines for assessing hydraulic actions on bridges5
Enhanced bridge damage assessment via data-model coupling driven approach with vibration signals5
Experimental and numerical investigation of the seismic behaviour of corroded precast concrete piers with grouting sleeve connections5
CFRP strengthening of reinforced concrete pontoon walls against ship bow collisions5
Real-world installations of tuned liquid column dampers for wind-induced vibration control of tall buildings5
Bridge damage analysis under joint environmental and operational variability5
Study on the potential of UAV scanning for measuring complex technical infrastructure5
Probability-based surface deterioration assessment of bridge pylon and state updating using inspected crack length distribution5
Improving seismic behaviors of precast segmental piers with bonded prestressed tendons5
Feasibility study on intelligent bridge combined with smart monitoring techniques4
Sustainable and seismic resilience of lightweight hybrid residential buildings - a Romanian perspective4
Estimating chloride exposure of reinforced concrete bridges using vehicle spray and splash mechanisms4
Bridge deterioration models for different superstructure types using Markov chains and two-step cluster analysis4
Combining long short-term memory and shape superposition for estimating moving load-induced global responses of bridges4
Requirements and challenges for infusion of SHM systems within Digital Twin platforms4
Uneven distribution of interfacial bond stress in steel fiber-reinforced concrete-encased steel composite structures4
A simple network-based probabilistic method for estimating recovery of lifeline services to buildings after an earthquake4
Evidence on the value of information towards decision-makers4
Experimental investigation on the hysteretic dynamics of a regenerative hybrid electrodynamic cable damper4
A new calculation method for the response of active-passive bridge piles considering pile-soil interface friction4
An approach to seismic damage detection and evaluation in RC bridge piers through vibration data4
Numerical study of precast segment columns with shear keys under vehicle collision4
Forward iterative algorithm for fabrication geometry of steel girders in cable-stayed bridges4
Investigation and treatment of bearing diseases for typical expressway and high-speed railway bridges in Eastern China: a field practice campaign4
Anomaly detection for bridge health monitoring data based on multiple encoded images and convolutional neural network4
Selection of optimum joint gap size in bridges with seat-type abutments based on life-cycle-cost criteria4
Fatigue life evaluation model for high-strength steel wire considering different levels of corrosion4
Seismic performance assessment and benefit-cost analysis of mid-rise reinforced concrete base-isolated building using double-curvature friction pendulum bearings4
Comparison of Markov chain and recurrent neural network in predicting bridge deterioration considering various factors4
Numerical study for development of subsurface crack detection using pulsed eddy current and swept frequency eddy current4
Value of information from fatigue monitoring of the monopile foundation of an offshore wind turbine4
Adaptively unsupervised seepage detection in tunnels from 3D point clouds4
A dynamic Gaussian process surrogate model based on the grasshopper optimization algorithm for non-probabilistic reliability analysis of complex structures4
Driving conditions and safety analyses of vehicles moving on highway bridges under seismic excitations4
The strengthening of the 130-year-old San Michele bridge in Paderno d’Adda, Italy – an experience between past and present3
Potential change of failure modes and time-dependent behavior of RC beams under a marine atmospheric environment3
Fatigue safety assessment of longitudinal and transverse reinforcements for concrete girder bridge designs3
A resilience-based methodology to assess the degree of interdependency between infrastructure3
An efficient simplified model for high-speed railway simply supported bridge under earthquakes3
Effect of stress-strain models and sectional analysis methods on the axial-flexural interactions of discontinuously FRP strengthened square RC columns3
Experimental evaluation on the seismic performance of reinforced concrete bridge columns with high strength reinforcement3
Extreme response to traffic of long-span cable-stayed bridges: comparison with existing traffic load models3
Energy-based time equivalent method for evaluating the fire resistance of timber–concrete composite structures exposed to travelling fires3
How conservative is the Norwegian fatigue load model for service life estimation of railway bridges?3
Evaluation of corrosion management strategies for steel truss bridges based on ultimate load capacity and lifetime direct cost3
A forensic investigation of progressive bridge collapse under floods and asymmetric scour validated by incident video footages3
Experimental investigation on static damage of concrete bridge under shear loading based on acoustic emission3
Class-A prediction of three-sided reinforced concrete culverts and numerical investigation of the supporting strip footing geometry effect3
A simplified model of layered soil for analyzing vertical vibration of loaded foundations3
Numerical study of phase space analysis for the development of subsurface crack detection method using pulsed eddy current3
Stochastic analysis of railway embankment with uncertain soil parameters using polynomial chaos expansion3
Deterioration models for geotechnical slopes: a systematic review on the long-term behaviour of earthwork assets3
Quantifying the value of SHM information for bridges under flood-induced scour3
Digital twins for asset management: case study of snow galleries in Northern Sweden3
Advanced post-earthquake safety assessment: a novel probabilistic approach for quantifying dissipated energy using aftershock vibration response3
A risk-based quantitative approach for priority assessment of ageing bridges accounting for deterioration3
C-AHP rating system for routine general inspection of long-span suspension bridges3
Detection of corrosion on steel structures using an artificial neural network3
Exploring the potential of the semi-active inertial absorber in control resonant effects for short-to-medium span high-speed railway bridges3
Impact of analysis method on the fragility curves of regular and irregular box-girder highway bridges3
Effect of girder deformation on the dynamic performance of high-speed train-track-bridge coupling system3
A methodology for probabilistic pavement condition forecast based on Bayesian filters3
Probabilistic-based assessment of subsidence phenomena on the existing built heritage by combining MTInSAR data and UAV photogrammetry3
Probabilistic structural identification and condition assessment of prestressed concrete bridges based on Bayesian inference using deflection measurements3
Dynamic analysis of cable-stayed beam structures based on dynamic stiffness theory3
A probabilistic framework for the resilience assessment of transport infrastructure systems via structural health monitoring and control based on a cost function approach3
Structural frequency-based maintenance management method for steel truss bridges under atmospheric corrosion3
Residual performance and damage mechanism of prestressed concrete box girder bridge subjected to falling heavy object impact3
Service-life multi-hazard risk assessment of structures: framework and application3
Bi-directional implementation of multiple-slider surface bearing to girder bridges: simplified 3-D modelling and seismic performance assessment3
Application of quality control plan to existing bridges3
Application of generalised equivalent extreme-value event in structural system reliability analysis3
Fatigue life updating of embedded miter gate anchorages of navigation locks using full-scale laboratory testing3
New technologies for bridge inspection and monitoring: a perspective from European Union research and innovation projects3
A consistent approach to the calibration of partial factors for permanent and variable loads in the 2nd generation of the Eurocodes3
A topological characterisation of looped drainage networks3
Transfer from defective bridge information model to defect analysis model based on industry foundation classes3
Predictive control using a hybrid data-based artificial neural network model: a case study on the construction of massive concrete structures3
Using global variance-based sensitivity analysis to prioritise bridge retrofits in a regional road network subject to seismic hazard3
A simplified method based on improved multiplication factors to assess crowd-induced vertical vibrations of footbridges3
Time-dependent reliability assessment of existing concrete bridges with varying knowledge levels by proof load testing3
Fire hazard in concrete bridges: review, assessment and mitigation strategies3
Structural behavior degradation of corroded metro tunnel lining segment3
Structural rehabilitation of half-joints in RC bridges: a state-of-the-art review3
Inerter-based tuned mass dampers for response control of multi-degree-of-freedom structures subjected to wind and earthquake excitations2
Impact of vertical girder deformations on the high-speed train operation performance2
Design loads and integrated performance metrics for highway bridges impacted by heavy vehicles2
A comparative study of projection-based vs. point-based point clouds segmentation for 3D bridge modeling2
Exploratory study on experimental and prediction based stress-strain behaviour of corroded prestressing steel strands2
Time-dependent seismic reliability of isolated bridges considering ageing deterioration of lead rubber bearings2
Creating a first-pass algorithm for corrosion assessment in bridge inspections using machine learning and UAV-collected imagery data2
Sustainable planning based decision-making approach for the restoration of historic road bridges2
Analysis of the pavement deterioration uncertainty scenarios on pavement maintenance and rehabilitation planning optimization2
A time and cost-effective strengthening of RC half joint bridges exposed to brittle failure: application to a case study2
Study on seismic response of flexure-shear critical RC columns wrapped with TRC shells2
Investigation on the mapping for temperature-induced responses of a long-span steel truss arch bridge2
0.060747861862183