Journal of Electroanalytical Chemistry

Article	Citations
Atomic layer deposition of NiO-Coated CNT nanocomposites: Tailoring electrochemical properties for salivary lactate detection	111
Detection of vitamin C in various falsified oral formulations using voltammetry	91
Calcination process of porous metal–organic frameworks derived from nickel sulfide composites for supercapacitor and computer vision for investigating the porosity-electrochemical correlation	79
W/Ni3(PO4)2@NC/NF nanorods via electrodeposition with carbonization as a bifunctional catalyst for electrocatalytic water splitting	77
Short communication: Stockwell transform as an alternative method for the corrosion rate evaluation of 6061-T6 aluminum alloy	74
Facile synthesis of cobalt-doped sodium lithium manganese oxide with superior rate capability and excellent cycling performance for sodium-ion battery	74
Editorial Board	73
Distinguishability of Battery Equivalent-Circuit Models Containing CPEs: Updating the Work of Berthier, Diard, & Michel	72
Bimetallic alloy nanoparticles embedded in N-doped carbon-based as an anode for potassium-ion storage material	71
Electrode polarization in the presence of a first order ionic trapping reaction	70
The steady-state diffusional flux to isolated square cuboids in solution and supported on an inert substrate	68
Editorial Board	65
Electrodeposition of Cu-based nanoarrays with tailored hierarchical nanostructure and their application for electrochemical nitrate sensing	62
Enhancing the sensitivity towards iodide detection by coupling SECM and an EĆ catalytic mechanism	61
Investigation into the suitability of screen printed graphene-melanin pH sensors for use in bacterial culturing applications	60
CoTe2 encapsulated in N-doped carbon nanonecklace as an anode for sodium-ion batteries	60
Conformal thioaluminate/aluminate polymer protective layer enables dendrite-free lithium metal batteries	59
Revealing the phase evolution and lithium diffusion in the liquid Sn-Sb electrode	58
A surface network based on oxidative graphene oxide for the determination of hydroquinone and catechol in ground and wastewater samples	58
Surface roughness-controlled foam-like GaN fabricated by the change H2O concentration in ionic liquid etchant solution via photoelectrochemical etching	58
Derivatization-free Ru(bpy)32+ electrochemiluminescence detection of gramine	58
Deposition of Cu on Ni3S2 nanomembranes with simply spontaneous replacement reaction for enhanced hydrogen evolution reaction	57
Comparison between polycrystalline Au and single-crystalline Au(1 1 1) electrodes as the substrate of a cationic organic monolayer based on their anion dependent redox activities	57
Electrochemical activation of CoMo LDH nanosheets driving surface reconstruction for enhanced hydrogen evolution	57
Sensitive simultaneous determination of catechol and hydroquinone based on iron and nitrogen doped carbon nanonets derived from MOFs	56

The oxidation of ferrocene in sessile toluene macro- and microdroplets: An opto-electrochemical study	53
Electrochemical study of the reactivity of furfural and 5-hydroxymethylfurfural with aliphatic primary (di)amines	52
Electrochemical sensing of copper-chelator D- penicillamine based on complexation with gold nanoparticles modified copper based-metal organic frameworks	51
Study on effect of chloride ions on corrosion behavior of reinforcing steel in simulated polluted concrete pore solutions by scanning micro-reference electrode technique	50
SnO2/Bi2O3/NF heterojunction with ordered macro/meso-pore structure as an advanced binder-free anode for lithium ion batteries	50
Corrigendum to “Co-doped hollow nanospheres with low Pt loading for electrocatalytic oxygen reduction and zinc-air batteries” [J. Electroanal. Chem. 967(2024) 118449]	50
Retraction notice to “4-dimethylaminopyridine: Discovery of a co-reactant system providing outstanding and reliable emission in electrochemiluminescence” [J. Electroanal. Chem. 921 (2022) 116507]	49
Water-soluble biowaste gum binders for natural graphite anode for lithium-ion batteries	46
Study on Nickel-induced 1T/2H MoS2 nanostructures in realizing efficient electrocatalysts for hydrogen evolution reaction	46
Self-supporting CuM LDH (M = Ni, Fe, Co) carbon cloth electrodes for selective electrochemical ammonia oxidation to nitrogen	45
Synergistic effect of trimetallic doping and π-π conjugation in NiZnCo-ZIF@HHTP for efficient oxygen evolution reaction	45
Advances in MXene-based photoanodes for water-splitting	45
Formation of hollow spheres structures Co/CoO/ZnO@NC from metal-organic frameworks as a anode for lithium-ion batteries	45
CuO quantum dots embedded Cu3(BTC)2/CuO sugar gourd-like nanoarrays on copper foil as free-standing anodes for lithium-ion batteries with boosted performance	45
The role of lithium, perchlorate and water during electrochemical processes in poly(3,4-ethylenedioxythiophene) films in	45
Enhanced lithium storage performance derived from Fe2Ti1-xNixO5 (0 ≤ x ≤ 0.1) as a fast charging anode	44
A simple and low-cost portable potentiostat with real-time data sharing for wireless electrochemical analyses	44
Designing of Fe- ZIF67 derived Fe-Co/NC with its reduced graphene oxide-based composites for hydrogen and oxygen evolution reaction	44
Electrochemical identification of hazardous phenols and their complex mixtures in real samples using unmodified screen-printed electrodes	44
AGNES in irreversible systems: The indium case	44
Porous CeO2/Ni-Cu composite catalyst for electrocatalytic hydrogen evolution in alkaline medium	43
Simple Cu2+ modification significantly improves the electrochemical performance of MXene (Ti3C2Tx) in aluminum batteries	42
Surface reconstruction of NiFe layered double hydroxides by S2- corrosion for efficient oxygen evolution	41
High-performance capacitive deionization using 3D porous Ti3C2T with improved conductivity	41
Erratum to “Electrochemical dissolution behavior and characterisation of passivation films of PH13-8Mo in NaNO3” [J. electroanalytical chemistry 981 (2025) 119004]	41
Boosting polysulfide capture and redox conversion by functional separator combined with porous hosts for advanced Li-S batteries	41
Preparing a graphene/carbon nanotube coated hollow nickel phosphides microsphere anode with high stability for high-performance lithium/sodium battery	40
An automated and lightweight framework for electrolyte diagnostics using quantitative microelectrode voltammetry	40
Portable and ultrasensitive detection of traces of water in alcoholic solvents by a polypyrrole-modified screen-printed electrode	39
Development of rapid and efficient enterovirus typing and classification platform for real-time diagnostics	39
Micro-meso porous biocarbons derived from a typical biopolymer with superior adsorption capacity for methylene blue dye and high-performance supercapacitors	39
Reduction of Ag+ irreversibly adsorbed on cyanide-modified Pt(111)	39
Three-dimensional Ni-MoN nanorod array as active and non-precious metal electrocatalyst for methanol oxidation reaction	38
Effect of fluoroethylene carbonate additive on the low–temperature performance of lithium–ion batteries	38
Accurate SWASV detection of Cd(II) under the interference of Pb(II) by coupling support vector regression and feature stripping currents	38
Detailed investigation the impact of biofilm formation and cathode limitations on electrochemical performance of biofuel cell	37
Electrochemical noise comparative study of pitting corrosion of 316L stainless steel fabricated by selective laser melting and wrought	37
Enhanced photoactivity of Bi2S3 nanoflowers by CS-AgBr and CeO2: Application in photoelectrochemical biosensor for the effect of antibiotics on N6-methyladenosine in rice tissues	37
Room-temperature fabrication of a heterostructure Cu2O@CuO nanosheet electrocatalyst for non-enzymatic detection of glucose and H2O2	37
A dual-carbon encapsulation architecture boosted charge transfer and cycling stability of sodium vanadium/manganese phosphate cathode for sodium-ion batteries	37
A new FeS2/N-C nanoparticle from NH2-MIL-101 for high performance lithium ion batteries	37
Inhibition of microbiologically influenced corrosion of Al alloy 5083 in the presence of Pseudomonas aeruginosa by Artemisia annua L	36
Transition metal atom anchored by defective WSSe monolayer as bifunctional single atom catalyst for ORR and OER	36
Design of CoP-CoO heterostructure to enhance the polysulfide redox conversion for lithium-sulfur batteries	36
A novel coral-like LiMn2O4 nanostructure as Li-ion battery cathode displaying stable energy-storage performance	36
A nanostructure based voltammetric platform constructed with carbon nanofibers and erbium nanoparticles for the determination of yohimbine and its DNA binding	36
Construction of metal (oxy) hydroxides surface on high entropy alloy as lattice-oxygen-participated electrocatalyst for oxygen evolution reaction	36
Photoelectrochemical determination of Pb2+ by combined electrochemical-chemical precipitations of PbI2 films	36
Determination of the recombination coefficient in electrolytic solutions from impedance spectroscopy measurements	35
An emerging machine learning strategy for electrochemical sensor and supercapacitor using carbonized metal–organic framework	35

Innovative electrochemical sensor for the precise determination of the new antiviral COVID-19 treatment Favipiravir in the presence of coadministered drugs	35
CO2 electrocatalytic reduction on Cu nanoparticles loaded on nitrogen-doped carbon	35
A label-free photoelectrochemical sensor based on BiVO4@graphene oxide hybrid for analysis of the antioxidant capacity in food	35
Electrochemical deposition of Si nano-spheres from water contaminated ionic liquid at room temperature: Structural evolution and growth mechanism	35
Conversion of toxic waste to wealth: Diesel soot carbon electrode for sodium-hybrid capacitor	35
Tri-metallic fluoride nanoplates immobilized on reduced graphene architectures as efficient oxygen evolution reaction catalyst	34
Dendritic Fe2O3 single crystal for high performance lithium-ion batteries by turning the concentration of the iron source	34
Periodic reverse electrodeposition of (1 1 1)-oriented nanotwinned Cu in small damascene SiO2 vias	34
Cobalt(II)-complex modified Ag electrode for efficient and selective electrochemical reduction of CO2 to CO	34
Electrochemical oxidation of hydroquinone using Eu-doped PbO2 electrodes: Electrode characterization, influencing factors and degradation pathways	34
Electrochemical sensor based on a glassy carbon electrode modified with a 3D carbon nanoporous composite for the detection of paracetamol in pharmaceutical samples	34
Iridium oxide nano-needles using electrodeposition for highly stable and sensitive pH sensor	34
Galvanic corrosion behavior between ADC12 aluminum alloy and copper in 3.5 wt% NaCl solution	34
Hollow NiCoSe2/C prepared through a step-by-step derivatization method for high performance supercapacitors	33
Synthesis of porphyrin-based metal-organic framework and biomass-derived carbon composite for electrochemical detection of Rutin	33
Accurate ion type and concentration detection using two bare electrodes by machine learning of non-faradaic electrochemical impedance measurements of an automated fluidic system	33
Core/shell NiMoSe@NiMoO4 micro-cuboids anchored on Nickel foam as self-supported electrode towards efficient and stable hydrogen generation	33
Versatile porous nanomaterials for electrochemiluminescence biosensing: Recent advances and future perspective	33
Emerging materials for the electrochemical detection of COVID-19	33
Amperometric ammonia sensors for low detection limit with BaZr(1-x)YxO3-δ proton electrolytes	33
Quenching-assisted surface functionalization of metal oxide for highly enhanced electrocatalytic urea oxidation	33
High-entropy selenide catalyst for degradation of organic pollutants	32
Quantum capacitance of supercapacitor electrodes based on M2C MXenes with pure -O and mixed termination: A first-principles study	32
Comparative study on pilot-scale production of CuO-loaded activated biochar and hydrochar from oil-palm empty fruit bunches for high-performance symmetric supercapacitor application	32
Co/N nanoparticles supported on a C3N4/polydopamine framework as a bifunctional electrocatalyst for rechargeable zinc-air batteries	32
Oxygen vacancies and Bi2S3 nanoparticles co-sensitized TiO2 nanotube arrays for enhanced photoelectrochemical sensing of chlorpyrifos	32
Revealing the surface modification effect on Li-ion insertion into Ni-rich NCM cathode material by cyclic voltammetry	32
Investigating the viability of electrochemiluminescence for archaeological material Analysis: A pilot study	32
MOF-derived CoP3/FeP on nitrogen-doped carbon nanoarray boosted high-performance hydrogen evolution	32
CoTe nanorods based electrochemical sensor for quantitative detection of albumin from chronic kidney disease patients	31
Enhancing supercapacitor performance with binder-free cobalt sulfide pseudo-capacitive electrodes: A path to sustainable energy storage	31
Melt-diffused binary solid–solid ionic mixture in a porous polymeric host as free-standing solid electrolyte for lithium batteries	31
Fabrication of 3D interconnected porous MXene-based PtNPs as highly efficient electrocatalysts for methanol oxidation	31
Electrodeposition of nanoporous nickel selenide on graphite rod as a bifunctional electrocatalyst for hydrogen and oxygen evolution reactions	31
Synthesis of novel α-cyclodextrin conjugated ZnFe2O4-GO nanocomposites for electrochemical detection of hazardous imidacloprid insecticide and enhanced photodegradation of levofloxacin drug	31
Microwave-assisted preparation of carbon coating layer on raspberry-shaped iron oxide particles for lithium-ion battery anodes	30
Polymerase incorporation of Cy5 modified 2′-deoxyuridine-5′-triphosphate into double- and single-stranded DNA for direct electrochemical detection	30
Dynamic electrochemical impedance spectroscopy for the charge transfer rate measurement of the ferro/ferricyanide redox couple on gold	30
Mass spectrometry insight into the electro-copolymerization mechanism of aniline with o-phenylenediamine	30
Multiwalled carbon nanotubes decorated ɛ-MnO2 nanoflowers cathode with oxygen defect for aqueous zinc-ion batteries	30
Enhanced cathode performance in lithium–sulfur batteries: Graphene-supported N-doped carbon nanotubes with cobalt encapsulation	30
Confined Pt and M (M = Fe, Co) nanoparticles on NC with ultralow Pt loading for oxygen reduction reaction	30
Efficient degradation of ibuprofen by electro-Fenton with microtubular gas- diffusion electrodes synthesized by wet-spinning method	30
Fluorine tin oxide-supported copper nanofilms as effective and selective de-nitration electrocatalysts	30
A novel electrochemical acetaminophen sensor based on multiwalled carbon nanotube and poly(neutral red) modified electrodes with electropolymerization in ternary deep eutectic solvents	30
Electrochemical properties and analytical advantages of potassium-selective sensor with tungsten trioxide solid contact	30
A low-fouling and reusable biosensor for the sensitive electrochemical assay of tuberculosis gene	29
VFe@Ni/Ni3N Mott-Schottky heterojunction induced electronic modulation for efficient alkaline water splitting	29
Identification and quantification of the distributed capacitance and ionic resistance in carbon-based supercapacitors using electrochemical techniques and the analysis of the charge-storage dynamics	29
Oxygen vacancy defects enable high performance V2O5 cathode for aqueous zinc batteries: A mini review	29
Editorial Board	29
Coupling of chrysanthemum-shaped cobalt hydroxide and nitrogen-doped carbon dots for high-performance hybrid supercapacitors	29
Hollow Cobalt Selenide-Carbon polyhedron sandwiched between reduced graphene oxide nanosheets: A superior anode material for lithium-ion batteries	29
Electrochemical formation of Sn films on copper by overpotential and underpotential electrodeposition in deep eutectic solvents	28
Selectivity and activity trends of single-phase copper-tin foam electrocatalysts in CO2 electroreduction reaction	28
Dual-potential ECL system based on cucurbit[6]uril enhanced anodic luminol emission and cathodic g-C3N4 emission and its sensing application for glucose	28
Characterization of self-assembled Bis[2-(2-bromoisobutyryloxy) undecyl] disulphide (DTBU) on gold surfaces suitable for use in surface-initiated atom transfer radical polymerization (SI-ATRP)	28
Long-life SnS/TiO2/C stemming from nano-TiO2 @C complex hull as Li-ion battery anode	28
Capacitive label-free ultrasensitive detection of PSA on a covalently attached monoclonal anti-PSA antibody gold surface	28
Editorial Board	28
Enhanced electrochemical performance of Na4MnCr(PO4)3@C cathode by multi-walled carbon nanotubes interconnection for Na-ion batteries	28
Modeling ‘dry’ OCP measurements to characterize archaeological iron corrosion II: Short-time transients	27
Microwave-assisted hydrothermal synthesis of a high-voltage microcube LiMn1.5Ni0.5O4−δ spinel cathode material	27
NiCoP self-supporting electrode with the sea urchin-like microstructure for the synchronous reaction of hydrogen evolution and contaminant degradation	27
Second harmonic generation as a probe of structure and dynamics of ionic liquids at the electrode interface	27
Tracking the electrocatalytic activity of Au@Ag core–shell nanoparticles for nitrite oxidation via single-entity electrochemistry	27
Hydrothermally reduced graphene oxide as a sensing material for electrically transduced pH sensors	27
MIP sensor made using multi-current step electro-polymerization method on framed Ag-SPE for glutamic acid enantiomer recognition	27
Monodispersed nickel phosphide nanocrystals in situ grown on reduced graphene oxide matrix with excellent performance as the anode for lithium-ion batteries	27
Porous and defective NiCo2O4 spinel derived from bimetallic NiCo-based Prussian blue analogue for enhanced hydrogen production via the urea electro-oxidation reaction	27
Studying ion transport dynamics in electrochemical measurements of lateral flow assays	26
Real-time monitoring of chlorobenzene gas using an electrochemical gas sensor during mediated electrochemical degradation at room temperature	26
A flow cell-based electrochemical system and isotherm-based linear interpolation for the determination of additive concentrations in Cu-Plating baths	26
A highly stable insertion type V1-xTixP solid solution as an anode material for high-rate lithium-ion batteries	26
High-performance supercapacitors using carbon dots/titanium dioxide composite electrodes and carbon dot-added sulfuric acid electrolyte	26
An investigation on the multiple roles of CeO2 nanoparticle in electrochemical sensing: Biomimetic activity and electron acceptor	26
CoMn2O4 nanoparticles supported on defect-rich N-doped carbon nanotubes as air electrode in rechargeable zinc-air batteries	26
Facile one-pot preparation of porous SiOx@Li2SiO3/C composite from rice husks for high initial coulomb efficiency lithium-ion battery anodes	26
Synthesis of polypyrrole nanotubes@nickel-molybdenum sulfide core–shell composites for aqueous high-performance asymmetric supercapacitors	26
p-Phenylenediamine electrochemical oxidation revisited: An insight into the mechanism and kinetics in acid medium	26

Tracking activity behavior of oxygen evolution reaction on perovskite oxides in alkaline solution via 3-dimensional electrochemical impedance spectroscopy	26
Electrochemical oscillations during the oxidation of 2-(dimethylamino)ethanethiol	26
Cathodic co-reactant electrogenerated chemiluminescence of water-soluble heteroleptic iridium(III) complexes bearing N-methyl(pyridyl)pyridinium cyclometalating ligands	26
Effect of nutrient concentration on corrosion mechanism of X80 pipeline steel caused by sulfate-reducing bacteria	26
Application of self-adapting regularization, machine learning tools and limits in Levenberg–Marquardt algorithm to solve CNLS problem	26
A Ti3C2 modified single electrode electrochemical system for the gold nanoprism-enhanced ECL detection of HER2	26
A dual optimization approach for photo-electric catalysis: Heterojunction of BiOBr/Ba0.7Sr0.3TiO3 system construction and ferroelectric polarization	26
Recent trends, perceptions and applications of microbial bioelectrochemical systems: An innovative technology	26
Convergent paired electrochemical synthesis of symmetric dispiro and spiropyrimidine derivatives based on reduction of para-nitrophenol	26
The effect of MOx (M = Zr, Ce, La, Y) additives on the electrochemical preparation of tungsten in eutectic Na2WO4–WO3 melt	26
Graphene oxide supported SnO2-WO3 nanocomposite as electrode material for lithium-ion batteries and battery-type supercapacitor	25
Fe3C nanoparticles decorated 3D nitrogen-doped carbon foam as a highly efficient electrocatalyst for nitrate reduction to ammonia	25
Heterostructured microspheres of MOF-derived (Zn,Mn)S/C coated manganese sulfide for aqueous zinc ion batteries	25
A binder-free copper sulfide cathode material for aluminum-ion batteries	25
Enhancement of polypyrrole electrochemical performance with graphene quantum dots in polypyrrole nanoparticle/graphene quantum dot composites	25
Rapid and straightforward electrochemical approach for the determination of the toxic food azo dye tartrazine using sensors based on silver solid amalgam	25
The effect of Mg2+ doping on Na3V2O2(PO4)2F/C cathode materials for enhanced sodium storage performance	25
Highly luminescent nitrogen doped graphene quantum dots sensitized TiO2 nanorod arrays for enhanced photoelectrochemical performance	25
Electrocatalytic and photoelectrocatalytic investigation of Orange G degradation utilizing a novel BHP@Bi2O3 photoanode employing the CCD-RSM experimental design	25
One-step synthesis of dendritic nanostructured single crystal NiSe electrocatalyst for hydrogen evolution reaction	25
In situ one-step electrochemical preparation of mesoporous molecularly imprinted sensor for efficient determination of indole-3-acetic acid	25
Passive direct methanol fuel cells acting as fully autonomous electrochemical biosensors: Application to sarcosine detection	25
Developing a high-performance aqueous zinc battery with Zn2+ pre-intercalated V3O7·H2O cathode coupled with surface engineered metallic zinc anode	25
Study of Cr2O3 nanoparticles supported on carbonaceous materials as catalysts for O2 reduction reaction	25
Synthesis and electrochemical behavior of K+ and Mn2+ co-doped LiFePO4/C as a cathode material for lithium-ion batteries and the mechanism of modification	25
Investigation of poly(3,6-dioxa-1,8-octane-dithiol)-based organosulfur polymer as the positive electrode material in rechargeable Li-S battery	24
Synthesis of Ni(OH)2/CuO via diaphragm glow discharge plasma for highly sensitive non-enzymatic glucose sensor	24
Photoelectrochemical degradation of organic compounds via formed reactive chlorine and sulfate species by WO3-based photoanodes	24
Tracking the evolution of processes occurring in silicon anodes in lithium ion batteries by 3D visualization of relaxation times	24
Accurately prepared the large-area and efficiently 3D electrodes for overall seawater splitting	24
Average metal ion electronegativity as a general descriptor for screening Ni-based double hydroxides with high electrocatalytic water oxidation activity	24
Metal-organic framework (MOF)-Au@Pt nanoflowers composite material for electrochemical sensing of H2O2 in living cells	24
Hierarchical nanowires of MoS2@transition metal sulfide heterostructures for efficient electrocatalytic hydrogen evolution reaction	24
1T-MoS2 grown on amorphous carbon-coated carbon nanotubes for high-performance lithium-sulfur batteries	24
Facile synthesis of nitrogen- and phosphorus-Co-doped porous carbon nanosheets embedded with FeP clusters for the oxygen reduction reaction using rechargeable zinc-air batteries	24
2D/2D MoS2/g-C3N4 layered heterojunctions with enhanced interfacial electron coupling effect	24
Constructing and electrochemical performance of NiCo-LDHs@h-Ni NWs core–shell for hydrazine detection in environmental samples	24
Detection of hydrogen peroxide with low-dimensional silver nanoparticle-decorated PPy-C/TiO2 nanocomposites by electrochemical approach	24
Enhancing catalytic efficiency: InSe quantum dots’ role in hydrogen evolution reaction	24
Dual atom coordinated nickel-cobalt selenide Nanoflowers with superior OER performance synthesized via one-step hydrothermal approach	24
Stable layered-layered-spinel structure of the Li1.2Ni0.13Co0.13Mn0.54O2 cathode synthesized by ball-milling assisted solid-state method	24
Inhibiting dendrite growth of electrodeposited zinc via an applied capacitor	24
Modeling and optimization of direct urea-hydrogen peroxide fuel cell using the integration of artificial neural network and bio-inspired algorithms	24
New insights into the phenacyl bromide electroreduction: Unambiguously characterized 5,5́-bis(3,5-diaryl-2(5H)-furanone). Anodic oxidation of 2,4-diphenylfuran	24
Comparison of the lithium storage performance and electrochromic behavior of Prussian blue and its analogues	23
Fractal growth behavior of chromium during metal electrodeposition	23
Printing parameters affect the electrochemical performance of 3D-printed carbon electrodes obtained by fused deposition modeling	23
Investigational undertaking descriptors for reduced graphene oxide-phthalocyanine composite based catalyst for electrochemical oxygen evolution reaction	23
Evaluation of Nb-Doping on performance of LiNiO2 in wide temperature range	23
Effect of deposition potential on electrodeposition of Sn-Ag-Cu ternary alloy solderable coating in deep eutectic solvent	23
Screen-printed electrode containing bismuth/graphene oxide hybrid for simultaneous detection of cadmium and lead ions	23
Experimental corroboration of theory for impedance response of solid electrolytes: Doped cubic garnet LLZO	23
Bimodal analysis of intracellular in situ self-assembled Au complexes based on single-cell electrochemistry	23
Electrochemical determination of melatonin using disposable self-adhesive inked paper electrode	23
Reversible Lithium-Ion Storage in h-Bi2Ge3O9-Based Anode: Experimental and Theoretical Studies	23
Enhanced ionic conductivity of Cu-doped NASICON solid electrolyte for solid-state sodium batteries	23
ECIS-based biosensors for real-time monitor and classification of the intestinal epithelial barrier damages	23
Cycling performance and failure behavior of lithium-ion battery Silicon-Carbon composite electrode	23
Cobalt-generated reactive oxygen species promoted FeS2/CoS2 for electrochemical detection of acetaminophen with the widest linear range and simultaneous detection of dopamine	23
Modelling and experimental validation of polarization behavior of airbreathing microfluidic fuel cell using some common fuels: Methanol, ethanol and sodium borohydride	23
Template-free synthesis of M/g-C3N4 (M = Cu, Mn, and Fe) porous one-dimensional nanostructures for green hydrogen production	23
Electrocatalytic activity of bimetallic PtPd on cerium oxide-modified carbon nanotube for oxidation of alcohol and formic acid	23
2D coordination unsaturated Ni-MOFs hierarchical nanosheets with internal electric fields for high-performance hybrid supercapacitors	23
Light responsive, electrochemically dimerizable, capture and release device based on photochromic oxazine for nanomolar level detection of Hg2+ ions	23
The optimization of iron porphyrin@MOF-5 derived Fe N C electrocatalysts for oxygen reduction reaction in zinc-air batteries	23
A structurally controllable flower-shaped phosphide derived from metal-organic frameworks for high-performance supercapacitors	23
Synergistic effect of two complexing agents on the hydrothermal synthesis of self-supported ZnNiCo oxide as electrode material in supercapacitors	23
MnO2@V2O5 microspheres as cathode materials for high performance aqueous rechargeable Zn-ion battery	23
Electrochemical behavior and separation of ytterbium from NaCl-CaCl2 molten salt by reactive electrodes	23
Combination of porous structure and MnO2 modification for improving capacitance of planar BDD electrode	22
Editorial Board	22
Effect of Pt-Ni deposition sequence on the bimetal-modified boron-doped diamond on catalytic performance for glucose oxidation in neutral media	22
Cement mortar cracking under accelerated steel corrosion test: A mechanical and electrochemical model	22
The effect of ammonium citrate on CoP/CC morphology and its electrocatalytic hydrogen evolution performance	22
Analysis of vanadium species(V(IV)/V(III)) in the electrolyte manufacturing process for vanadium redox flow battery using digital image	22
Editorial Board	22
Direct electrochemistry & enzyme characterization of fresh tobacco RNA	22
Editorial Board	22
Nano-Co3O4 anchored helical carbon nanofibers as an anode material for Li-ion batteries	22
Preparation of ultra-thin sandwich Cu-Cu/CNTs-Cu composite foil with high tensile strength by electrodeposition	22
Regulating the Zn electrode/electrolyte interface with lactose additive for high performance Zn anode	22
Preparation of hollow SnO2@N-C nanospheres for high performance lithium-ion battery	22
Editorial Board	22
Editorial Board	22
Promising electrochemical performance of pristine SnO2 anodes for lithium and sodium-ion batteries	22
3D nanoporous core-shell ZnO@Co3O4 electrode materials for high-performance supercapacitors and nonenzymatic glucose sensors	22
A DFT and SERS study of synergistic roles of thermodynamics and kinetics during the electrocatalytic reduction of benzyl chloride at silver cathodes	22
Synthesis of highly crumpled carbon-graphene composite for adsorption-controlled potassium-ion anode materials	22
Construction of 3D Co/Co9S8 encapsulated by graphite carbon for high performance supercapacitor	22
FeN4- and CoN4-centered transition metallomacrocyles as highly efficient non-noble metal electrocatalysts for oxygen reduction reaction	22
Rotten albumen derived layered carbon modified separator for enhancing performance of Li-S batteries	22
Morphology-controlled synthesis of La[Fe(CN)6] and the porous erythrocyte-like derivant applied for high-performance supercapacitors	22
Using magnetic nanoparticles/MIP-based electrochemical sensor for quantification of tetracycline in milk samples	22
Bi-functional Ni-Co-P/rGO/NF flower-like structure as an electrocatalyst for hydrogen production assisted by urea oxidation reaction	21
Corrosion evolution of Cu-Pb alloys from the Western Zhou Dynasty in simulated archaeological soil environment	21