Organic Electronics

Article	Citations
Potential-based model for asymmetric and symmetric double-gate organic thin-film transistors	58
Proton-gated organic thin-film transistors for leaky integrate-and-fire convolutional spiking neural networks	41
Mechanism of defect passivation achieved by chemical interaction in inverted perovskite solar cells	37
Compact model for the bias-depended low-frequency noise in organic thin-film transistors due to carrier-number and mobility-fluctuation effects	37
Efficient greenish-blue thermally activated delayed fluorescence Zn complex for organic light emitting devices	34
Deep-blue electroluminescence with orthogonal donor-acceptor structure: The role of charge-transfer excited state component in hybrid local and charge-transfer (HLCT) excited state	34
Tuning of external magnetic field-driven circularly polarized electroluminescence in OLED devices with a single achiral Pt(II) complex	33
Origins of the improved device performance in solution-processed TADF organic light-emitting devices with a polymer underneath layer	33
Practical theory of spectral evolution in an organic laser diode	33
Bridged triazatruxene-based host materials for solution-processed thermally activated delayed fluorescence organic light emitting diodes with high power efficiency	29
Design and optical waveguide behavior of full-color emitting materials with adjustable band gap	29
Method for instability compensation and detection of ammonium in sweat via conformal electrolyte-gated field-effect transistors	29
Stable organic light-emitting diodes based on thioxanthone derivative with shortened photoluminescence delayed lifetime	28
Multifunctional thermally activated delayed fluorescence emitter for both doped and non-doped organic light emitting diodes	27
Alkali cations modified poly(styrene sulfonate) enabling interfacial band structure regulation for efficient true-blue perovskite light-emitting diodes	26
Magneto-tunability of photocurrent in p-Si (100)/NiFe2O4/SL/CuPc/Al [where, spacer layer (SL)=P3HT and rGO] heterojunction devices at room temperature: Role of organic interface in Opto-spintronics	25
Design, synthesis, and photovoltaic performance of regioisomeric D18 – Impact of cross-conjugation on electronic structure and solar cell efficiency	25
Biodegradable TMCM-CdCl3/polylactic acid composites for piezoelectric energy harvesting	24
Enhanced synaptic behavior of neuromorphic device based on organic electrochemical transistors by adding Aminosilane	24
Host-guest energy level matching criteria for cyano-based host materials in phosphorescent and TADF OLEDs	24
Interface engineering utilizing bifunctional metformin for high performance inverted perovskite solar cells	24
Ferroelectric polarization assisted organic artificial synapse with enhanced performance	23
Molecular-orientation-dependent magnetic properties of iron phthalocyanine (FePc) thin films and microwires	22
Field effect characteristics and gas sensing properties of vertically grown PANI nanofibers	22
A synaptic memristor based on natural organic honey with neural facilitation	21

Highly efficient non-doped organic light-emitting diodes based on long-range coupling and efficient energy transfer	20
Imide-modified thermally activated delayed fluorescent materials for pure blue organic light-emitting diodes with low efficiency roll-off	20
Natural DNA biopolymer synaptic emulator for neuromorphic computing	20
Sequential deposition method processed ternary organic solar cells with efficiency of 17.92%	19
SnO2 electron transport layer modified with gentian violet for perovskite solar cells with enhanced performance	19
High efficiency perovskite solar cells via NaCl modified tin oxide electron transport layer	18
Accelerated design of stable halide perovskite heterostructure film in hostile condition via surface modifier	18
TiO2 nanoarrays/Au nanoparticles/PProDOT-Py hybrid heterojunction UV photodetector	18
Novel isocyanobenzene carbazole-based thermally activated delayed fluorophors towards solution-processed blue emitting OLED devices with high efficiency	18
TCAD simulation of organic field-effect transistors based on spray-coated small molecule organic semiconductor with an insulating polymer blend	18
Donor-acceptor polymeric inks with transition-metal dichalcogenide nanosheet suspensions for inkjet-printed thin-film transistors	17
Impact of buffer layer thickness on the performance of metal halide perovskite memristors	17
High mobility wide bandgap polymer realized by a combined modification strategy of processing solvent and dielectric interface	17
Influence of surface groups on SnO2 nanoparticles in enhancing perovskite photodetector performance	17
Effective surface treatment for efficient and stable inverted inorganic CsPbI2Br perovskite solar cells	17
New additive as Li+ source for charge transfer improvement at triple-cation perovskite/Spiro-OMeTAD interface	17
Approaching 800 nm near-infrared thermally activated delay fluorescence materials via simple malononitrile condensation strategy	17
TADF and HLCT emission switching by changing the intramolecular charge transfer properties through modification of substituent orientation	17
Highly stretchable and mechanically robust silver nanowires on surface-functionalized wavy elastomers for wearable healthcare electronics	17
Anisotropic etching by electrospray for reduction in parasitic resistance of organic field-effect transistors	17
Dual additive strategy to regulate the phase separation of bulk heterojunction layer for efficiency enhancement in non-fullerene organic solar cells	16
Computational screening of multi-resonance thermally activated delayed fluorescence (MR-TADF) molecules for lasing application	16
High-performance inverted ternary organic solar cells using solution-processed tin oxide as the electron transport layer	16
Efficient dopant-free small-molecule hole transport material with D-A-D structure for inverted perovskite solar cells	16
Impact of crystallinity and grain density on the charge-carrier distribution and transport in organic semiconductors	15
Measuring frontier orbital energy levels of OLED materials using cyclic voltammetry in solution	15
Solution-processed NiO tailoring hole injection and enhancing photoluminescence in light-emitting diodes	15
High-efficiency α-FAPbI3 perovskite solar cells based on one-dimensional TiO2 nanorod array scaffolds	15
SnO2:TiO2 hybrid nanocrystals as electron transport layer for high-efficiency and stable planar perovskite solar cells	15
Overcoming light loss in semi-transparent ternary organic solar cells with ultra-thin metal electrodes	15
Effects of source/drain electrode thickness on water-induced instability of laminated organic single-crystal field-effect transistors	14
Enhancing photovoltaic performance and stability of inverted perovskite solar cells via multifunctional molecular additive	14
ITO-free organic solar cells with oxide/metal/oxide multilayer structure cathode	14
Dramatic effect of electrode type on tunnel junction based molecular spintronic devices	14
A simple approach for improving the photovoltaic efficiency of organic solar cells through polymer modification via anion exchange as the interlayer	14
Biocompatible bovine serum albumin dielectric layers for high-performance and neuromorphic n-type organic field-effect transistors	14
Perovskite films passivated by poly[(R)-3-hydroxybutyric acid] for improved photovoltaic performance	14
Low-color-temperature white QD light-emitting electrochemical cells	13
Guanidine carbonate modified TiO2/Perovskite interface for efficient and stable planar perovskite solar cells	13
Carrier mobility in organic semiconductors with an exponential density of states under the framework of admittance spectroscopy	13
Alcohol assistant surface passivated perovskites for efficient perovskite solar cells	13
New bipolar derivatives with diphenylsulfone or dibenzophenone as TADF based emitters for OLEDs	13
Synthesis of highly dispersed TiO2 NPs/GO composites sol and its application in inverted perovskite solar cells	13
The field-effect mobility of fluorinated quinoxaline-based simple polymers with different electron-donating moiety	13
An amino-phthalocyanine additive enhances the efficiency of perovskite solar cells through defect passivation in mixed-halide films	13
Flexible piezoelectric sensor based on PVDF/ZnO/MWCNT composites for human motion monitoring	13
Instability mechanism of phosphomolybdic acid solution and its effect on organic solar cells as a hole-transporting layer	13
Organic synaptic transistors: Biocompatible neuromorphic devices for in-vivo applications	13
Boosting the performance of triple-cation perovskite solar cells through 2-phenylethanethiol treatment and green anti-solvent	13
Endowing deep-red BODIPY luminophors with enhanced aggregation-induced emission by installing miniature rotor of trifluoromethyl for solution-processed OLEDs	13

Metal and halogen-free purely organic room temperature phosphorescence material using heavy atom effect of phenoselenazine	13
Molecularly imprinted (3, 4-ethylenedioxythiophene) polymer based electrochemical non-enzymatic glucose sensor	13
Synergistic effects of ultrasonication and the addition of a nucleating agent on improving the crystallization and performance of P3HT	13
Alkylthio side-chain engineering on the quinoxaline-based electron acceptors for efficient organic solar cells	12
Organic mixed ion-electron conductive composite films based on polyacrylic acid/polyaniline	12
Moisture-dependent room-temperature perovskite crystallization in vacuum flash-assisted solution processed intermediate phase films	12
Photopatternable and self-healable ionogels for organic thin-film transistors	12
N-type buffer-free interface for efficient low-light organic photosensitive electronics	12
2D/3D heterojunction engineering at the grain boundaries towards high-performance inverted MA-free perovskite solar cells	12
High-performance, high-resolution quantum dot light-emitting devices through photolithographic patterning	12
Dye-modified halide perovskite materials	12
Fully electromagnetic wave optic simulation and analyses of the cross-scale reflective 3D OLED pixel configuration	12
OLEDs on planarized light outcoupling-enhancing structures in plastic	12
Interfacial modification by conjugated polyelectrolytes with amino acid groups in perovskite solar cells	12
Electrical synaptic devices with a high recognition rate based on eco-friendly nanocomposites of a poly(methyl methacrylate) matrix embedded with graphene quantum dots for neuromorphic computing	12
A universal hole transport layer for efficient organic solar cells processed by blade coating	12
Red–green–blue–yellow (RGBY) magnetic circularly polarized electroluminescence from iridium(III)-magnetic circularly polarized organic light-emitting diodes	12
Morphology optimization induced by a highly volatile solid additive contributes to efficient organic solar cells with enhanced photostability	12
Improving efficiency in RGB phosphorescent and white organic light emitting diodes via donor-spiro-boron acceptor host materials	11
Recombination reduction by ammonium additives in ambient air process for organometal halide perovskite solar cells	11
Fluorinated benzimidazole-based conjugated polymers for ternary memory devices	11
A theoretical study on the influence of N-containing heterocyclic ligands on the luminescence mechanisms (phosphorescence or TADF) of Au (III) complexes	11
Enhanced thermoelectric performance of PEDOT:PSS film by two-step post-treatment with mixed solvent based ionic liquid	11
Cycling stability of organic electrochemical transistors	11
Research on the multiplication mechanism of single-carrier transport-based multiplication-type organic photodetector	11
A simple lithography-free approach for the fabrication of top-contact OFETs with sub-micrometer channel length	11
Electrical current modeling for polymer light-emitting electrochemical cells: Contributions from electrons, ions, and oxygen	11
High luminance/efficiency monochrome and white organic light emitting diodes based pure exciplex emission	11
Sandwich-type thermally activated delayed fluorescence molecules with through-space charge transfer excited state for red OLEDs	11
Study on the influence of hole transport materials on the response speed of organic photodetectors by time-of-flight technique	11
Suppress energy loss to boost power conversion efficiency of organic photovoltaics with linear side chains modulation	11
Improved performance in quantum-dot light-emitting diodes through current annealing	11
Color-temperature dependence of indoor organic photovoltaic performance	11
Reproducible high-efficiency and color stable single-emitting-layer cold WOLEDs based on inhibition of energy transfer and efficient exciton harvesting	10
Effects of alkyl chain on the liquid crystalline properties of [1]benzothieno[3,2-b][1]benzothiophene-based organic semiconductors	10
Nanocrystalline copper iodide enabling high-efficiency organic LEDs	10
Power-efficient and high-performance potential of pentacene transistors enabled by metal-nitride gate insulators fabricated with nitrogen plasma	10
Experimental investigation of the mobility in the ITIC single crystal based field-effect transistor	10
Dopant-free hole-transporting materials based on a simple nonfused core with noncovalent conformational locking for efficient perovskite solar cells	10
Power losses in conventional and inverted non-polymeric donor:fullerene bulk heterojunction solar cells - The role of vertical phase separation in BQR:PC71BM blends	10
Interfacial engineering by p-methylphenylmethylammonium iodide for efficient carbon counter electrode (CE)-based 2D/3D hybrid perovskite solar cells	10
Low-voltage RGB perovskite light-emitting transistors with magnetron sputtered Ta2O5 high-k dielectric layer	10
Enhanced photovoltaic performance of carbon-based perovskite solar cells through synergetic passivation effects via bulk and surface	10
Room-temperature deposited fluorine-doped tantalum pentoxide for stable organic solar cells	10
Improving efficiency and stability of perovskite solar cells by SiO2 layer incorporation	10
Modelling and numerical simulations of eco-friendly double absorber solar cell “Spiro-OmeTAD/CIGS/MASnI3/CdS/ZnO” and its PV-module	10
Theoretical insights into long-range coupling of electron-hole pairs in TCTA–PO-T2T exciplex	10
A facile and efficient preparation method for the doped light emitting layer in OLEDs: Blade-coated planar source evaporation	10
Naphthalene-Arylamine starburst architectures: Novel hole transport materials for enhanced OLED performance	10
Cyclic(amino)(barrelene)carbene metal amide complexes: Synthesis and thermally activated delayed fluorescence	10
Photoconductivity and electronic processes in PCDTBT polymer composite with embedded CdSe nanoplatelets	10
Comparative studies on frontier orbitals, molecular packing and optoelectronic properties of ambipolar polymer semiconductors based on bisthiophene-fused diketopyrrolopyrrole	10
High efficiency, ultra-low roll-offs in orange phosphorescent organic light-emitting devices using a novel exciplex system	10
Photomultiplication-type perovskite photodetectors base on air-processed perovskite films	10
Enhancing efficiency and stability of perovskite solar cells by introduction of triethanolamine	10
Enhancing the performance of perovskite solar cell via optimizing the solvent of hole transport layer	10
Polar molecule as passivation agent towards enhanced carrier transport properties in perovskite solar cells	10
Overall enhancement of electrical properties of indium oxide thin-film transistors by surface doping	9
Progressive quenching of luminescence from quantum dot thin films in proximity with ZnMgO in unencapsulated stacks	9
Effects of PCBM loading on high sensitive P3HT based vertical bulk resistive X-ray detector	9
Molecular design for high exciton utilization based donor-π-acceptor type fluorescent emitter for OLEDs application	9
Resistive switching kinetics of electrolyte-gated polyaniline-based memristive devices	9
Ultrathin polymer electrochemical microcapacitors for on-chip and flexible electronics	9
Seed crystal layer-assisted growth of CsPbBr3 perovskite film via electro-spray deposition for sensitive direct X-ray detection	9
Ternary solvent engineering incorporating hydrogen bonding for FAPbI3 perovskite solar cells	9
Trion-charge-transfer state in bulk heterojunction polymer solar cell	9
High-performance copper nanowire electrode for efficient flexible organic light-emitting diode	9
High hysteresis and distinctive optoelectronic memory effect for ambipolar thin-film transistors using a conjugated polymer having donor–acceptor heterojunction	9
An artificial synapse based on organic heterojunction of conducting polymer and molecular ferroelectrics	9
Novel near-unity 0D organic-inorganic copper-based halide TEA2Cu2Br4 for high-efficiency and stable ultraviolet photodetectors	9
Electrochemiluminescence for high-performance Chiral recognition of enantiomers: Recent advances and future perspectives	9
Temperature behaviour of mixed-cation mixed-halide perovskite solar cells. Analysis of recombination mechanisms and ion migration	9
Approaches for white organic light-emitting diode via solution-processed blue and yellow TADF emitters: Charge balance and host-guest interactions in a single emission layer	9
Single-layer encapsulation film with CaO absorbent by solution process	9
Over 16% efficiency organic/nanostructured Si heterojunction solar cells with a p-doped organic small molecule layer	9
Second-phase of low-dimensional perovskite in-situ grown from TACl with remnant PbI2 for high quality PSCs	9
N-type organic phototransistors based on PTCDA single crystals for broadband imaging	9
3-oxetanylmethanol as additive to PEDOT:PSS for improved conductivity and water-resistance and applications in ink-jet printed electrochemical transistors	9
Terthiophene based non-fused electron acceptors for efficient organic solar cells	9
Highly-sensitive full-scale organic pH sensor using thin-film transistor topology	9

Electrochromic behaviors of novel conjugated copolymers based on [1,2,5]thiadiazolo[3,4-g]quinoxaline, carbazole and cyclopentadithiophene units: Multicolor, double-doping and low band gap	9
Organic molecular materials with high fluorescence quantum yields over 90% in the near-ultraviolet region	8
Electrochromic supercapacitor electrodes based on viologen-derived cross-linked thin films	8
Photoinduced spin-orbital coupling effect at donor: acceptor interface in non-fullerene organic solar cells	8
Improving performance of quantum dot light-emitting diodes through PMA-doped PEDOT:PSS hole injection layer	8
Determination of exciton diffusion lengths potentially free from electrodes and charge related inaccuracies	8
Novel ytterbium Schiff base complex: Toward efficient solution-processed NIR-emitting OLED	8
Enhancing performance of organic-inorganic perovskite solar cells using super halogen additive	8
Influence of side-chain substitution for thiophene-based conjugated polymers on the charge transport properties: Carboxylate ester group versus carboxamide group	8
Performance improvement of ZnO nanorod arrays / ZnO quantum dots / P3HT hybrid photodetector by Au nanoparticles	8
Digital organic memristor based on P3HT doped with organic small molecules TmPyPB/ TpPyPB	8
SnS/PEDOT:PSS composite films with enhanced surface conductivities induced by solution post-treatment and their application in flexible thermoelectric	8
Regulation of film morphology and vertical phase separation for inverted organic solar cells via a volatile solvent additive	8
Stability ascent in perovskite solar cells employing star poly(3-hexylthiophene)/quantum dot nanostructures	8
Synaptic transistor based on PVK mixed with oxadiazole and its logic gate application	8
Compact model for threshold voltage of organic thin film transistors	8
Interplay between charge separation and hole back transfer determines the efficiency of non-fullerene organic solar cells with low energy level offset	8
Efficient post-treatment strategy for enhancing the performance and stability of the inverted perovskite solar cells based on Boc-D-Val-OH	8
Extrapolation method for reliable measurement of Seebeck coefficient of organic thin films	8
Hydroxylamine additive enabled interface trap reduction for enhanced fullerene-based n-type organic transistors	8
Enhanced stability of carbon-based perovskite solar cells by using n-butylamine to assemble 2D capping layer	8
Analyses of emission efficiencies of white organic light-emitting diodes having multiple emitters in single emitting layer	8
Benzothiadiazole-thiophene based conjugated Polymers: Impact of conjugated chain length on electrochromic performance	8
Transfer-printing phosphorescent OLEDs: Progress towards microdisplay applications	8
Investigating the donor:acceptor ratio in thermally activated delayed fluorescence light-emitting macromolecules	8
An ion-modulated organic electrochemical synaptic transistor for efficient parallel computing and in-situ training	8
Duty-cycle dependence of photo-induced displacement current in MISIM photocells	8
Thienothiophene and benzothiadiazole based conjugated donor-acceptor polymers; synthesis, photophysical properties and organic field effect transistor applications	8
Efficient carrier-filtering performance probing of oxide buffer-layers in organic solar cell at nanoscale	8
Evaluation of thermal effects on natural organic honey memristive thin film for resistive switching memory applications	8
Simulation of neural functions based on organic semiconductor/MXene synaptic transistors	8
Ink formulation of phosphorescent emitter with mixed host and its application in inkjet-printed organic light-emitting devices	8
Fabrication of organic thin films using slit nozzle with a wide viscosity spectrum	8
Aromatic ammonium salts ligand engineering-assisted CsPbBr3 quantum dots enable electroluminescent solar cell	8
Highly efficient inverted organic solar cells with natural biomaterial histidine as electron transport layer	8
Molecular engineering of oxadiazole-based small organic-functional molecules as hole transporting materials for dopant-free perovskite solar cells	8
Enhancement of power conversion efficiency of dye-sensitized solar cell via symmetrical Bi-anchoring organic molecules as co-sensitizer	8
Solvent-mediated surface ligand exchange to enhance the performance of quantum-dot light-emitting diodes	7
Spiro[fluorene-9,9′-xanthene]-based hole transporting materials modulated by mono- and bis- benzodioxino[2,3-b]pyrazine pendant groups for perovskite QLEDs	7
Systematically-optimized charge transport properties in cumulatively solution-coated zinc tin oxide and applications for complementary inverter circuits combining organic p-type transistors	7
A poly(methyl methacrylate)-encapsulated perovskite solar antenna with a long lifespan	7
High-CRI warm white OLEDs based on TADF-Doped Exciplex Co-host Structure enabled by efficient reverse intersystem crossing	7
Photogating-based organic synapse electronics modulated by dielectric	7
Design and performance of sulfur and selenium-substituted triarylboron D3-A TADF emitters for OLED applications	7
Boosting the performance of polymer field-effect transistors through fluorine atom substitutions and comparing the effect of various acceptor units and channel mobilities	7
Synergistic effects of dual-optical-nanocavity resonance and localized surface plasmons to enhance light absorption in organic solar cells	7
Measurement of electron injection barriers in OS/Au (OS=phthalocyanine and pentacene) using accumulated charge measurement	7
Nitrogen and sulfur Co-doped carbon dots with excellent fluorescent thermal stability for anti-counterfeiting and information encryption	7
Low-cost fabrication of organic rectifying diodes for high-speed AC/DC conversion	7
Screen printing of graphene-based nanocomposite inks for flexible organic integrated circuits	7
Isotropic contact patterning to improve reproducibility in organic thin-film transistors	7
Design, synthesis and properties of a new near-infrared small molecule acceptor for organic photodetector	7
A comprehensive review of organic frameworks: From synthesis to perovskite solar cells fabrication	7
Amorphous dielectric metal-organic electron injection layer for efficient inverted organic light-emitting diodes	7
Energy gap and orbital mixing in DNTT/PTCDI-C8 heterostructure	7
Manipulating the photophysical properties of multi-donor molecules for fast reverse intersystem crossing in solution-processed OLED devices	7
Efficient and stable perovskite solar cells based on blade-coated CH3NH3PbI3 thin films fabricated using “green” solvents under ambient conditions	7
A flexible P(VDF-TrFE) piezoelectric sensor array for orientation identification of impulse stress	7
Poly(3,4-ethylenedioxythiophene) dispersion in water free organic solvents using sulfonated poly(ether sulfone) as new polymeric template	7
The influence of contact material and flat-band voltage on threshold voltage of organic field-effect transistors	7
Dibenzo[b,d]thiophene 5,5-dioxide-based dopant-free hole-transporting material with passivation effect in inverted perovskite solar cells	7
Two non-halogen additives significantly improve the efficiency of PTB7-Th:PC71BM-based polymer solar cells in non-halogen solvent	7
Suppression of dead zones in slot-coated organic thin films by monitoring of meniscus formation for OLEDs	7
High-performance fully solution-processed OLEDs based on carbazole-benzonitrile TADF emitter with long alkyl chains	7
Effect of mild mechanical stresses on device physics of slot-die coated flexible perovskite solar cells	7
Biodegradable and flexible capacitive pressure sensor for electronic skins	7
Calix[4]resorcinarene-cored hyper-structured molecules containing 1,8-naphthimide-9,9-dimethyl-9,10-dihydroacridine units and N,N-dicarbazolyl-3,5-benzene units for solution-processed orange red therm	7
Influence of N-type electron acceptors in perovskite absorbers for stabilized perovskite absorbers for high-performance perovskite solar cells	7
Temperature-assisted crystallization and morphology for CH3NH3PbI3 perovskite solar cells using laser-induced heat treatment	7
Confronting positions: para- vs. meta-functionalization in triindole for p-type air-stable OTFTs	7
Theoretical exploration on the combined effect of isoelectron B-N bonds and B-N resonance skeleton on the thermally activated delayed fluorescence property	7
Ion effects on salt-in-water electrolyte gated polymer electrochemical transistors	7
Preparation of TiO2 film using a novel high-bias pulsed FCVA for flexible OLED film encapsulation	7
Modification of energy levels by cetyltrimethylammonium bromide at the perovskite/carbon interface for highly efficient and stable perovskite solar cells	7
Efficient and stable MAPbI3 perovskite solar cells via green anti-solvent diethyl carbonate	7
Theoretical study on the mechanism of aggregation-induced emission in red thermally activated delayed fluorescence molecules: trans/cis-arrangement effect	7
Design, synthesis, and photophysical studies of substituted indigo derivatives for p-type organic thin film transistors	7
Real-time threshold voltage compensation on dual-gate electrolyte-gated organic field-effect transistors	7
Surface modification of perovskite film by an amino acid derivative for perovskite solar cell	7
Improved out-coupling efficiency of organic light-emitting diodes using micro-sized perovskite crystalline template	6
Assessment of sputtering damage in organic layer surface based on energy distribution of positively charged particles formed during facing-target sputtering of indium–tin oxide	6
Balance PCE, AVT and CRI for good eye comfort semi-transparent organic photovoltaics via Ga2O3 or In2O3 electron collection layers	6
Acceptor molecules with different central and terminal units for P3HT based solar cells: Effects of the molecular structures on their properties	6
Ion transport to temperature and gate in organic electrochemical transistors with anti-freezing hydrogel	6
Simple method to synthesize larger n 2D perovskite from (C(NH2)3)(CH3NH3)n[PbnI3n+1] of n = 1 using isopropanol	6
Improved performance of CsPbBr3 light-emitting diodes based on zinc bromide passivated quantum dots	6
Improved mechanical properties of Al2O3/acrylic laminates for flexible thin film encapsulation by introducing wavy interfaces	6
High responsivity self-powered flexible broadband photodetector based on hybrid Selenium-PEDOT:PSS junction	6
Triphenylamine-based organic small-molecule interlayer materials for inverted perovskite solar cells	6
Blue phosphorescent organic light-emitting diodes with extended operational lifetime through hole transport layer management	6
Blue narrowband emission in aza-boron-diquinomethene complexes via steric engineering to reduce vibronic shoulder	6
Fabrication of 1D/3D heterostructure perovskite layers by tetrabutylammonium tetrafluoroborate for high-performance devices	6
The effect of electron donor and acceptor conformations on thermally activated delayed fluorescence	6
Multifunctional heterojunction synaptic transistors based on transferred organic semiconductor crystals for superior visual adaptation	6
Suppressing dark current of air-processed perovskite photodetectors via manipulation of interface engineering with 2-ethyl-1-hexylamine	6