Polymer Science Series B

Papers
(The TQCC of Polymer Science Series B is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Investigating the Electrical Properties of Epoxy Resin Containing MWCNT–PANI with a Core-Shell Morphology: Synthesis and Characterization19
Linear and Branched Lactide Polymers for Targeted Drug Delivery Systems18
Thiol-Ene “Click Reactions” as a Promising Approach to Polymer Materials17
Effects of Carbon Nanotubes on the Compressive and Flexural Strength and Microscopic Structure of Epoxy Honeycomb Sandwich Panels15
Physical and Chemical Properties of Composites Based on Polythiophene and Titanium Dioxide Nanoparticles for Photocatalysis13
Biocidal Polymer Formulations and Coatings13
Influence of Synthesis Method on the Properties of Carbon Fiber Precursors Based on Acrylonitrile and Acrylic Acid Copolymers10
Effects of Surface Modified Graphene Oxide on the Cure Kinetics of Warm-Mixed Epoxy-Asphalt10
Polyelectrolytes and Polycomplexes for Stabilizing Sandy Grounds9
Multifunctional Polypyrrole/Multi-Walled Carbon Nanotube Composite Material: Dielectric, Humidity Sensing and Broadband EMI Shielding Properties8
DFT Calculations of Some Important Radicals Used in the Nitroxide-Mediated Polymerization and Their HOMO‒LUMO, Natural Bond Orbital, and Molecular Electrostatic Potential Comparative Analysis8
Gas Sensors Based on Conjugated Oligomers and Polymers as Promising Sensitive Elements for Toxic Gases Monitoring in the Atmosphere8
Novel Potential Precursor of Carbon Fiber Based on Copolymers of Acrylonitrile, Acrylamide, and Alkyl Acrylates8
Synthesis and Physicochemical Properties of the Nanocomposites Based on Sodium Carboxymethyl Cellulose and Selenium Nanoparticles8
Novel Cationic Polymerization of β-Myrcene Using a Proton Exchanged Clay (Maghnite-H+)7
Synthesis and Characterization of Hybrid Material Based on Poly(pyrrole-co-N-methyl pyrrole) and ZnCo2O47
High Water Resistance Polyvinyl Alcohol Hydrogel Film Prepared by Melting Process Combining with Citric Acid Cross-Linking7
Protective Nanocomposite Coating Based on Ginger Modified Clay and Polyurethane: Preparation, Characterization and Evaluation Anti-Corrosion and Mechanical Properties7
Effective Low Temperature Cure Cardanol Based Mono-Functional Benzoxazines: A Comparison7
Optical Properties, Antibacterial Activity, and Relaxation Behavior Investigation of Chitosan/Green Synthesized Silver Nanoparticles by Thermally Stimulated Depolarization Current Technique6
Influence of Synthesis Conditions on the Physicochemical Properties of Poly-2-[(2E)-1-methyl-2-buten-1-yl]aniline6
Sodium Alginate Interpolymer Complexes as a Platform for pH-Tunable Drug Carriers6
Enhanced the Thermal Stability of Polyvinyl Chloride via Synergistic Effects of Basic Lanthanum Tartrate with Zinc Stearate and Pentaerythritol6
Synthesis of a New Type of Star-Shaped Poly(2-alkyl-2-oxazolines) on the Basis of Sulfochlorinated Calix[8]arene6
Preparation and Properties of Novel Magnetic Methylene Blue Molecularly Imprinted Polymer6
Study of the Properties of Polyethylene/Thermoplastic Starch Blends: Determination of the Critical Compatibilizer Concentration6
Terpolymers of Acrylonitrile, Acrylic Acid, and Alkyl Acrylates: Effect of Alkyl Acrylate on the Thermal Properties of Copolymers5
Flexible Low Dielectric Polyimide/Fluorinated Ethylene Propylene Composite Films for Flexible Integrated Circuits5
Determination of Lignin Content in Plant Materials Using Solid-State 13C NMR Spectroscopy5
Comparative Analysis of Magnetorheological Effect in Soft Isotropic and Anisotropic Magnetoactive Elastomers5
Radiation Synthesis of Hydrogels with Silver Nanoparticles for Use as an Antimicrobial Burn Wound Dressing5
Synthesis and Characterization of Conducting Poly(2-aminothiazole)/Modified-Clay Nanocomposites5
Preparation and Characterization of a Novel Chemically Crosslinked Chitosane-g-Polyacrylamide Hydrogel as a Promising Adsorbent for the Removal of Methylene Blue from Aqueous Solutions5
In-Situ Elevated Temperature Interlaminar Shear Response and Thermal Behavior of Graphene Nanoplatelet Reinforced Kevlar/Epoxy Laminated Composites5
Synthesis of Amphiphilic Copolymers of Acrylic Acid and Styrene with the Desired Microstructure and Their Properties5
Alginate Functionalization for the Microencapsulation of Insulin Producing Cells5
Photoreduction Reaction of Carbonyl-Containing Compounds in the Synthesis and Modification of Polymers5
Zirconium and Hafnium Complexes Bearing Salen Ligands for the Polymerization of Ethylene4
Synthesis, Characterization, and Microbial Degradation Behavior of Hydrogel Based on Poly(ε-caprolactone) and Methacrylic Anhydride4
Studies on Structural, Dielectric, and Electrical Properties of the PMMA-BNT Ceramics Polymer Composites4
Kinetics of Dissolution of Polyacrylonitrile in N-Methylmorpholine-N-oxide in the Absence and Presence of Cellulose4
Features of Methyl Methacrylate Polymerization Mediated by Methylene Blue and Ethyl 2-Bromoisobutyrate under Photoirradiation Conditions4
Green Synthesis of CuO Nanoparticles Decorated into CA/PES Polymer As an Effective Dye Adsorbent4
Iron-Mediated AGET ATRP of Methyl Methacrylate in Green Polar Ethyl Lactate Solvent without any External Ligand4
Synthesis and Properties of Polymerization-Filled Composites Based on Polypropylene and Single-Wall Carbon Nanotubes4
Synthesis of Grafted Biodegradable Poly(ε-caprolactone) as Antibacterial and Antifungal Agent4
Cyanate Ester Monomers and Oligomers. Overview of the Modern Research State and Perspectives4
Green Synthesis Method of Poly[(2,5-diyl pyrrole)(4-hydroxy-3-methoxy benzylidene)] Semiconductor Polymer Using an Ecologic Catalyst4
Silicones in Cosmetics4
The Thermo-Mechanical and Fluorescent Properties of Polyesters: A Review3
Study of the Interaction of Polyphenylsilsequioxane with Boronic Acid under Conditions of Mechanochemical Activation3
Isolation and Physicochemical Characteristics of Pectin from Inonotus Hispidus3
Novel Biocomposites Based on El Retma Natural Fiber and PLA/PC Mixture Compatibilized Using Samarium Acetylacetonate Catalyzed Interchange Reactions3
Synthesis, Characterization, Curing, Thermal and Mechanical Properties of Methylene-Xylene-Based Polysulfide Block Copolymer/Cloisite 30B Nanocomposites3
Synthesis of New of Norbornene–1,5-Bis(hexenyl)hexamethyltrisiloxane Copolymers via Olefin Metathesis Reaction3
Microporous Polymers Based on Rigid-Chain Di- And Triacetyl Aromatic Compounds3
Organosilicon Comb-Shaped Surfactants for the Synthesis of Polymer Suspensions with a Narrow Particle Size Distribution3
Photocontrolled Radical Polymerization of Methacrylate Monomers Mediated by Systems Based on Aryl Derivatives of Phenothiazine3
Oligomeric Silsesquioxanes Bearing 3-Aminopropyl Groups3
Preparation and Characterization of New Soluble and Thermally Stable Polyazomethine by Polycondensation of Thiophene-2,5-dicarboxaldehyde and Ortho-tolidine for Optoelectronics3
Preparation, Characterization, and Pyrolysis of Polycarbosilane with High Ceramic Yield and High Viscosity3
Influence of Bacterial Cellulose Gel Film Modification on Its Mechanical Properties and Ability to Covalently Bind Enzymes3
Effect of the Chemical Structure of Chitosan Copolymers with Oligolactides on the Morphology and Properties of Macroporous Hydrogels Based on Them3
Synthesis of Poly(Ethylene Terephthalate)–4'-Hydroxybiphenyl-4-Carboxylic Acid Copolymers by Transesterification3
5-(Methoxymethyl)norbornene-Based Addition Polymer: Synthesis and Gas-Transport Properties3
The Spectral Characteristics and Morphology of a Composite Material Based on Polylactide and Alkoxy-Substituted meso-Arylporphyrins3
Electrochemical Polymerization of Diphenylamine-2-Carboxylic Acid on Glassy Carbon and Activated Graphite Foil3
Thermal Behavior of Poly(acrylonitrile-co-1-vinyl imidazole) During Stabilization3
Bio-Based Self-Healing Polymeric Materials Derived from Furfuryl Alcohol Based on the Diels-Alder Reversible Reaction3
Structural, Thermal and Electrochemical Behavior of Poly(2-ethylaniline)-nanocomposite-Fe2O3 and Poly(2-ethylaniline)-nanocomposite-SiO2 for Antibacterial and Antioxidant Studies3
Poly(p-xylene trisulfide): Synthesis, Curing and Investigation of Mechanical and Thermal Properties3
Synthesis of Novel Fluorinated Poly(aryl ether ketone)s and Their Properties3
Structure of the Products of Hydrolytic Copolycondensation of 3-Aminopropyltriethoxysilane and 3-Methacryloxypropyltrimetoxysilane: NMR Study2
Enzyme Catalyzed Synthesis of Water Soluble Mesalazine Oligomers and Evaluation of their Efficiency in Polypropylene Stabilization2
In Situ Preparation of Polymer Nanocomposites Based on Sols of Surface-Modified Detonation Nanodiamonds by Classical and Controlled Radical Polymerization2
Modified Antiproteinase Hemosorbent2
Synthesis and Properties of Colorless Transparent Polyimides with Low CTE and High Tensile Strength2
Some Aspects of Cu(0)-Mediated Radical Polymerization2
The Effect of the Properties of the Anion on the Process of Formation of a Copper Sol upon Reduction in a Solution of Poly(N-vinylpyrrolidone)2
Antibacterial Activity of Polymer Blend Nanocomposites with the Incorporation of Bentonite and Gold Nanorods2
Synthesis and Characterization of Schottky Diodes from Polyaniline Doped with Trifluoroacetic Acid2
Preparation of Photocoated Polysiloxane Nanoparticles from 3-Mercaptopropyl Trimethoxysilane with Furan Substitues by the Photoinitiated Thiol-Ene Reaction2
Structure of Hydrogels and Activity of Proteins Immobilized in Them2
Advances in the Synthesis of Oligomer Epoxyphosphazenes with Reduced Inflammability2
Copolymers of Methyl Acrylate and Vinylazoles: Synthesis, Thermolabile Properties, and Grafting of Polyamine Chains2
Structural, Electrical and Dielectric Studies on Novel Chitosan/Polyaniline/Molybdenum-Trioxide Hybrid Nanocomposites2
Covalent Modification of Epoxy-Amine Systems with a Guanidine-Containing Oligomer to Enhance Their Activity against Pathogenic Microorganisms2
Synthesis of Phenylboronic Acid-Based Microgels and Their Glucose-Responsive Properties2
Investigation of Thermal Properties of Polyureas2
Synthesis of New Thermotropic Fully Aromatic Copolyesters from Hydroxybenzoic and Hydroxybiphenylcarboxylic Acids2
Controlled Synthesis of Copolymers of N-Vinylsuccinamic Acid and Vinyl Alcohol for Immobilization of Low-Molecular-Weight Biologically Active Substances2
Synthesis and Characterization of Ethylene Glycol-Polydimethylsiloxane-Polybutyl Methacrylate Copolymer2
Loosely Crosslinked Hydrogel with Combined Water-Retaining and Anti-Erosion Effect2
Features of the Effect of Organochlorine Compounds on Polymerization of Olefins and Dienes in the Presence of Ziegler–Natta Catalysts2
Electrical Conductivity and EMI Shielding Efficiency of PPY-PVA-Ni Nanocomposite Films2
Effect of Nanoparticle-Filled Lubricant Layer on Fluoropolymer Slippery Liquid-Infused Porous Surface2
Structure and Properties of Poly(1-trimethylsilyl-1-propyne) Synthesized Using NbF5- and TaF5-Containing Catalytic Systems2
A Hybrid Deep Learning Model for Predicting Lifetime and Mechanical Performance Degradation of Multilayer Greenhouse Polyethylene Films2
Hydrogels of N-(2-Carboxyethyl)chitosan with Vanillin2
Iron Sulfide Functionalized Polyaniline Nanocomposite for the Removal of Eosin Y from Water: Equilibrium and Kinetic Studies2
Encapsulation of Molecularly Imprinted Polymer Particles in Microcapsule by Facile Pickering Emulsion Polymerization2
Synthesis of Mixed Functional Oligoaryloxycyclotriphosphazenes2
Hyperbranched Oligoglycerols and Photochromic Compositions on Their Basis2
Interpolymer Complexes of Star-Shaped Copolymers of Polyoxazoline with the Calixarene Core and Linear Polyacids in Solution2
Topological and Electronic Properties of Chlorine-Substituents on the α-Diimine Ni-based Catalysts2
Diphenyl Oxide Copolyarylenephthalides with Different Ratio of Phthalide and Diphthalide Groups2
Study on the Preparation and Properties of Carboxymethyl Chitosan as Fast Hemostatic Material2
Synthesis of Poly(ester-graft-methyl methacrylate) on a Macroinitiator with Lateral Sulfonyl Chloride Groups by Atom Transfer Radical Polymerization2
Novel Polyetherimides Based on 5-Methyl-1,3-phenylene-bis-4-oxyphthalic Acid Dianhydride: Synthesis and Physicochemical Properties2
Preparation of Poly(methyl methacrylate-co-butyl acrylate) Modified by Vinyltriethoxysilane and Its Properties for Stone Relics Protection2
Synthesis, Characterization, and Kinetic Study of Poly(2-formyl pyrrole)2
0.028307914733887