Journal of Mechanics of Materials and Structures

Papers
(The median citation count of Journal of Mechanics of Materials and Structures is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-12-01 to 2025-12-01.)
ArticleCitations
Nonlinear vibration of functionally graded circular nanoplates based on the stress-driven method24
16
Discontinuity-induced mixed mode oscillations for the nonsmooth Murali–Lakshmanan–Chua circuit12
9
Design of a 3D braided multi-mode piezoelectric energy harvester and electromechanical coupling analysis7
A new element-free Galerkin method for 3D elasticity problems7
An alternative method for computing the splitting factor of noncompatible generalized mixed elements with distortion6
A partially debonded rigid hypotrochoidal inhomogeneity under uniform remote in-plane stresses6
Analytical estimation of cohesive parameters for a bilinear traction-separation law in DCB mode I loading6
Mechanical behavior and constitutive models of nanocrystalline nickel foils under conditions of different pulse currents and their applied directions4
Multiaxial mechanical properties of additive manufactured titanium gyroid4
A novel damage model for cortical bone under repeated loadings4
Size effects on the full stick contact of gradient nanostructured coatings3
3
The contact problem for FGPM coatings considering the surface effect3
Nonlinear Flamant problem3
3
The interpolating element-free Galerkin method for the variational-hemivariational inequality of the frictionless elastic contact problem with normal compliance and unilateral constraint3
Energy absorption characteristics of a new auxetic honeycomb and its application to a bumper3
A study on the contact problem of a layer consisting of functionally graded material (FGM) in the presence of body force3
Comparative study of graded honeycombs with various cellular structures under impacting load3
Experimental study on biaxial proportional low-cycle fatigue crack propagation of hull inclined-crack plate based on CTOD2
Dynamic response of stiffened plates under moving loads and masses2
A novel mass spring model for simulating deformable objects2
Phase field simulation of the inclusion instability and splitting processes in interconnects due to interface diffusion induced by electromigration2
A viscoplastic approach to the chemomechanical behavior of Sn microstructure2
Analysis of crack path instabilities in a quenched glass plate using the phase-field cohesive zone model2
Nonlinear oscillations in dielectric viscoelastomer generators2
Analytical solutions to buckling analysis of sandwich composite plates with uncertain material properties and dimensions2
A method for inverse identification of virtual material parameters of a Sumali-like model joint interface taking into account the range of bolt preload forces2
2
Magnetoelectroelastic response of functionally graded multiferroic coatings under moving Hertzian contact2
Dynamic response and mechanical model analysis of a shear thickening fluid damper2
2
Nonconforming generalized H-R mixed element for static and dynamic analysis of piezoelectric composite laminated plates2
Effect of welding parameters on surface formation and microstructure for TC4 titanium alloy joint welded by CMT2
Applications of modified Dugdale model to multiple collinear straight cracks with coalesced yield zones2
Comparison of multiple surrogate models probing uncertainty in natural frequency of hybrid functionally graded sandwich cylindrical shells2
Performance and strengthening mechanism analysis of a 4N aluminum foil rolled by multipass rolling2
Frictional receding contact problem of a functionally graded orthotropic layer / orthotropic interlayer / isotropic half plane system2
Equivalent mechanical properties of additively manufactured octagonal honeycombs: theoretical and experimental analysis2
Mode III fracture analysis of an oblique through-crack emanating from a nanohole with surface effect2
In situ monitoring of solid propellants under compressive load by MWCNT piezoresistive sensor2
Dynamic stress concentration caused by a moving punch in double-porous rock media2
Point loads on a straight slot with rounded ends for a plane elasticity problem2
A new approach for rubber numerical modeling under biaxial testing conditions thorough finite element simulation2
On the spatial behavior of solutions for the three-phase-lag thermal model2
Residual stress and strain energy in composites induced by transformed coated circular inhomogeneities1
Vibration and damping characteristics of auxetic honeycomb sandwich panels with polyurea-metal laminate face sheets1
Thermal shock cracking in thin plate specimens using a gradient damage model1
Study on indentation contact behavior of a hyperelastic semi-infinite solid under nonequal biaxial stretching1
Novel Kuhn–Tucker conditions with R-program to analyze the buckling of a functionally graded porous beam1
Consistent explicit formulation for adiabatic thermal softening of Johnson–Cook model with improved numerical stability for implicit solver1
High-cycle fatigue modelling on a benchmark DCB mode I debond using a cohesive zone model1
Optimal synthesis of an adjustable six-bar path generator mechanism using a cuckoo optimization algorithm1
Unified original and iteration minimum energy bounds on longitudinal-transverse elastic constants of transversely isotropic unidirectional composites1
Analysis of mechanical properties in negative Poisson’s ratio metamaterials1
Comparison of methods for estimating notch stress intensities at sharp V-notches1
Divergence instabilities of nonuniformly prestressed travelling webs1
Sound radiation and wave propagation of functionally graded carbon nanotube reinforced composite plates1
Vibrations of nonuniform bidirectional functionally graded nanotubes based on the refined beam theory in a thermal environment1
A state-of-art review on the mechanical performance of basalt textile reinforced concrete (BTRC)1
The interpolating EFG method for steady heat conduction problems in anisotropic materials1
A double coated circular elastic inhomogeneity with internal uniform deviatoric stresses1
Investigation of stress-strain state of an incompressible elliptic cylinder with a hole1
Mixed variational principle for shape memory solids1
A regularized level-set approach to the computation of brittle fracture in solids1
Active vibration control for three-dimensional braided composite beams based on piezoelectric sensor and actuator1
1
Experimental analysis of oblique ballistic impacts on Kevlar and steel plates from a blunt-nosed hollow projectile1
Physics-based constitutive equation for thermochemically aged elastomers based on crosslink density evolution0
Numerical analysis of the mechanical behavior of CPAP masks: effects of modeling the soft tissues0
0
Strength prediction model for foamed cellular concrete0
Uniformity of stresses within an elliptical inhomogeneity coated by an interphase layer with eigenstrains0
The DeepXDE framework for solving transient heat conduction problems0
Two collinear cracks in a transversely isotropic medium under the hyperbolic heat conduction law0
A nonlinearly coupled thermoelectric circular inhomogeneity with interface slip and diffusion0
Bending, buckling and free vibration of Timoshenko beam-based plane frame via FEM with nonlocal integral model0
Determining the bending behavior of St-37 rectangular tubes with finite element validation0
A spherical elastic inhomogeneity with interface slip and diffusion under a deviatoric far-field load0
A mass spring model applied for characterizing mode I fracture in orthotropic materials0
Vibration reduction of low frequency of phononic-like crystal structures for subways0
A three-phase anisotropic elastic elliptical inhomogeneity with internal linear stress and strain distributions0
A computational homogenization model for mechanical properties of natural fiber reinforced cementitious composites with functionally graded interphase0
Influence of cracks on the mechanical response of structural layers of asphalt pavements using the discrete element method0
A mass spring model applied for simulation and characterization of behavior of composite structures0
A rational and efficient local stress recovery method for composite laminates0
0
Stiffness characteristics of elastic thin plates equipped with precision instruments0
0
Influence of surface effect correction on peridynamic simulation of dynamic fractures in brittle materials0
Interfacial reinforced viscoelastic damper: experimental and theoretical study0
Effect of inflating air on the static behavior of ETFE cushions0
Remarks on boundary layers and matched asymptotics for an edge-buckling problem0
0
Fast Fourier transform-based solutions of initial value problems for wave propagation in microelastic media0
Prediction of fatigue crack extension life and assessment of load reduction0
An iterative Trefftz method for the inverse Cauchy problem in isotropic thin plate bending0
A semianalytical approach for the variational asymptotic sectional analysis of a beam with high values of initial twist and curvatures0
0
2-D multistable structures under shear: equilibrium configurations, transition patterns, and boundary effects0
Direct evaluation of the modification coefficient kmod for the static-fatigue design of annealed glass panes under wind load0
Microstructure evolution mechanism of high entropy alloys under impact loading0
Evaluation of mechanical behavior of Al6092/SiCp metal matrix composites under different conditions0
Design strategies for a multimaterial Hopkinson bar that provides a specific spectral character loading0
Case study of the Bövik–Benveniste methodology for imperfect interface modeling of two-dimensional elasticity problems with thin layers0
Dynamic response of an interlocking plastic-block wall with opening0
0
Indentation of compressible soft polymers in prestretched state0
An anisotropic elastic inhomogeneous elliptical inclusion0
Edge dislocation in a thin film with curvature-dependent surface tension0
Linearized ordinary state-based peridynamic micromechanics of composites0
An analytical method for nanocomposites containing periodic coated fibers using the eigenfunction expansion-variational method0
0
Dislocation gliding in a coated buried layer submitted to misfit stress0
Effect of initial stress on a microstretch thermoelastic medium immersed in an infinite inviscid fluid with two models0
Comparative analysis of axial and radial mechanical properties of cortical bone using nanoindentation0
The extended boundary element analysis of stress fields of V-notched/cracked structures in bonded bimaterials0
A Hermite interpolation element-free Galerkin method for elasticity problems0
0
Analysis and design of a winding tension system based on the influence of thermal-dependent parameters0
0
Wave reflection and Rayleigh waves in the context of the complete Toupin–Mindlin theory of strain gradient elasticity0
Size-dependent axisymmetric buckling and free vibration of FGP-microplate using well-posed nonlocal integral polar models0
Diffraction of SV waves by a surface effective elliptic cavity0
Forming mechanics of a twin-roll cast AA1100/409L clad sheet after annealing and cold rolling0
Deformations and internal forces in arches under a concentrated force0
Cosserat micropolar elasticity: classical Eringen vs. dislocation form0
The net interaction force between two skew dislocations in an anisotropic quasicrystalline space or half-space0
Cosserat elasticity of octet truss titanium alloy lattices0
A summary of boundary conditions to govern web lateral movement in roll-to-roll process machines0
Vibrational analysis of finite plate on elastic foundation subjected to oblique impact0
An interface crack in piezoelectric bimaterial with one electrically conductive and two electrically permeable zones at its faces0
0
Laser powder bed fusion of multilayer corrugated sandwich structures: Mechanical properties and failure mechanisms under bending loadings0
Numerical study on the ForceMate bushing cold expansion of composite holes using a novel assisting sleeve0
0
Peridynamic equation with boundary traction0
Performance and efficiency of composite shafts supported by active magnetic bearings0
Analysis of band gap structures of thermal wave in functionally graded thermoelectric phononic crystals0
0
Elastic wave dispersion and polarization in a chiral elastic metamaterial0
Spherical indentation of EPDM and silicone rubber materials under high- and low-temperature conditions0
Effects of spring oscillators on the vibroacoustic properties of porous sandwich plates under elastic constraints0
Nonlinear flexibility expression of conical springs with constant pitch under large deformation conditions and its FEM verification0
Electroelastic effects on local-global buckling of piezoelectric cylindrical shells with stepped thickness0
Pull-in instability of multilayered quasicrystal cantilever nanoactuator with bonding imperfections based on nonlocal theory0
A mechanical model for direct wafer bonding by strain energy under normal pressure0
Analytical model for tension-induced residual stress of pre-stress filament hoop wound composite rings by inverse iteration method0
Thermal convection in rapid 3D extension of a planar crack0
On perfectly matched layers of nonlocal wave equations in unbounded multiscale media0
Efficient damage simulations under material uncertainties in a weakly intrusive implementation0
An edge dislocation interacting with an elliptical incompressible liquid inclusion0
On the effectiveness of convolutive type variational principles in the numerical solution of viscoelastic problems0
A continuous stiffness approach for modeling edge-cracked beams with different cross-sections based on energy theory0
Buckling of simply supported – clamped functionally graded material columns : new exact solutions0
Thermal buckling analysis of nonuniform FG nanobeams: analytical and numerical solutions0
Testing and simulation of mixed-mode debond failure behaviour of a bonded composite joint0
Analysis of multiple plastic stress singularities for antiplane V-notches in hardening materials by using the interpolating matrix method0
Analyzing the tethered satellite towing dynamics problem using a material point-finite element hybrid method0
Numerical simulation of frozen soil under uniaxial and coupled dynamic-static impact loads0
0
Phase-field simulation of conductive inclusion evolution in highly symmetric oriented single crystal metal interconnects under anisotropic interface diffusion induced by electromigration0
Numerical solution of bidirectional functionally graded materials using a novel meshless global radial basis reproducing kernel particle method0
Green’s functions for two-phase transversely isotropic piezoelectric media with viscous interface0
Characteristic bending length in micropolar materials with periodic internal structure0
Particle swarm optimization for curved beams in multistable structures0
Analytical evaluation of laminated composite DCB test data for achieving validated modelling analysis0
0.062176942825317