Journal of Biomedical Materials Research Part A

Papers
(The TQCC of Journal of Biomedical Materials Research Part A is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-10-01 to 2024-10-01.)
ArticleCitations
Collagen based electrospun materials for skin wounds treatment79
Recent trends in gelatin methacryloyl nanocomposite hydrogels for tissue engineering72
3D bioprinting of photo‐crosslinkable silk methacrylate (SilMA)‐polyethylene glycol diacrylate (PEGDA) bioink for cartilage tissue engineering58
Skin wound healing assisted by angiogenic targeted tissue engineering: A comprehensive review of bioengineered approaches58
In vitro and in vivo advancement of multifunctional electrospun nanofiber scaffolds in wound healing applications: Innovative nanofiber designs, stem cell approaches, and future perspect55
Fabrication of hybrid scaffolds obtained from combinations of PCL with gelatin or collagen via electrospinning for skeletal muscle tissue engineering52
Implantable magnetic nanofibers with ON–OFF switchable release of curcumin for possible local hyperthermic chemotherapy of melanoma51
3D printed hybrid bone constructs of PCL and dental pulp stem cells loaded GelMA49
Effect of manganese, zinc, and copper on the biological and osteogenic properties of mesoporous bioactive glass nanoparticles48
Human decellularized adipose matrix derived hydrogel assists mesenchymal stem cells delivery and accelerates chronic wound healing41
Decellularized grass as a sustainable scaffold for skeletal muscle tissue engineering41
Dual drug release mechanisms through mesoporous silica nanoparticle/electrospun nanofiber for enhanced anticancer efficiency of curcumin39
Comparing the wound healing effect of a controlled release wound dressing containing curcumin/ciprofloxacin and simvastatin/ciprofloxacin in a rat model: A preclinical study36
In vitro and in vivo degradation assessment and preventive measures of biodegradable Mg alloys for biomedical applications36
Enhanced antibacterial properties on superhydrophobic micro‐nano structured titanium surface35
Engineering and polymeric composition of drug‐eluting suture: A review35
Sustained released of bioactive mesenchymal stromal cell‐derived extracellular vesicles from 3D‐printed gelatin methacrylate hydrogels33
Recent advances and trends in the applications of MXene nanomaterials for tissue engineering and regeneration33
Biodegradable polyurethane scaffolds in regenerative medicine: Clinical translation review33
Green synthesis of gold nanoparticles for immune response regulation: Mechanisms, applications, and perspectives33
Reinforced electrospun nanofiber composites for drug delivery applications31
An additive manufacturing‐based3Dprinted poly ɛ‐caprolactone/alginate sulfate/extracellular matrix construct for nasal cartilage regeneration31
Incorporating nanocrystalline cellulose into a multifunctional hydrogel for heart valve tissue engineering applications30
Rational design of anti‐inflammatory lipid nanoparticles for mRNA delivery30
Dual response of osteoblast activity and antibacterial properties of polarized strontium substituted hydroxyapatite—Barium strontium titanate composites with controlled strontium substitution29
Injectable open‐porous PLGA microspheres as cell carriers for cartilage regeneration29
Cationic chitosan‐modified silica nanoparticles for oral delivery of protein vaccine29
Tissue‐engineered nerve graft using silk‐fibroin/polycaprolactone fibrous mats decorated with bioactive cerium oxide nanoparticles28
Modulation of injectable hydrogel properties for slow co‐delivery of influenza subunit vaccine components enhance the potency of humoral immunity28
Physical and biological properties of electrospun poly(d,l‐lactide)/nanoclay and poly(d,l‐lactide)/nanosilica nanofibrous scaffold for bone tissue engineeri27
A comprehensive review of biological and materials properties of Tantalum and its alloys27
Chitosan/hydroxyapatite nanocomposite scaffolds to modulate osteogenic and inflammatory response27
Evaluation of novel biomaterials for cartilage regeneration based on gelatin methacryloyl interpenetrated with extractive chondroitin sulfate or unsulfated biotechnological chondroitin27
The performance of 3D bioscaffolding based on a human periodontal ligament stem cell printing technique26
Optimization of extracellular matrix production from human induced pluripotent stem cell‐derived fibroblasts for scaffold fabrication for application in wound healing25
Controlled release of resveratrol from a composite nanofibrous scaffold: Effect of resveratrol on antioxidant activity and osteogenic differentiation23
Microneedle based adipose derived stem cells‐derived extracellular vesicles therapy ameliorates UV‐induced photoaging in SKH‐1 mice23
A three dimensional in vivo model of breast cancer using a thermosensitive chitosan‐based hydrogel and 4 T1 cell line in Balb/c22
Fabrication of multifunctional mucoadhesive buccal patch for drug delivery applications22
Recent advances and challenges in graphene‐based nanocomposite scaffolds for tissue engineering application22
Effect of the immune responses induced by implants in a integrated three‐dimensional micro‐nano topography on osseointegration22
Conductive and injectable hyaluronic acid/gelatin/gold nanorod hydrogels for enhanced surgical translation and bioprinting21
Surface modification of neurotrophin‐3 loaded PCL/chitosan nanofiber/net by alginate hydrogel microlayer for enhanced biocompatibility in neural tissue engineering21
Alginate hydrogels functionalized with β‐cyclodextrin as a local paclitaxel delivery system21
Fabrication of nanocomposite/nanofibrous functionally graded biomimetic scaffolds for osteochondral tissue regeneration21
Coaxial 3D bioprinting of tri‐polymer scaffolds to improve the osteogenic and vasculogenic potential of cells in co‐culture models21
Digital light processing‐based multi‐material bioprinting: Processes, applications, and perspectives20
Growth factor‐loaded microspheres in mPEG‐polypeptide hydrogel system for articular cartilage repair20
Preparation of multilayer electrospun nanofibrous scaffolds containing soluble eggshell membrane as potential dermal substitute20
Cartilage biomechanics: From the basic facts to the challenges of tissue engineering20
Effect of porosity on mechanical and biological properties of bioprinted scaffolds20
Prosthetic meshes for hernia repair: State of art, classification, biomaterials, antimicrobial approaches, and fabrication methods20
Intrinsic osteoinductivity of PCL‐DA/PLLA semi‐IPN shape memory polymer scaffolds19
Fish cartilage: A promising source of biomaterial for biological scaffold fabrication in cartilage tissue engineering19
A bone‐on‐a‐chip collagen hydrogel‐based model using pre‐differentiated adipose‐derived stem cells for personalized bone tissue engineering18
Interleukin‐4 repairs wear particle induced osteolysis by modulating macrophage polarization and bone turnover18
Tissue response, macrophage phenotype, and intrinsic calcification induced by cardiovascular biomaterials: Can clinical regenerative potential be predicted in a rat subcutaneous implant model?18
Development of novel bone‐like nanocomposite coating of hydroxyapatite/collagen on titanium by modified electrophoretic deposition17
Blood compatibility and cell response improvement of poly glycerol sebacate/poly lactic acid scaffold for vascular graft applications17
Polydopamine‐drug conjugate nanocomposites based on ZIF‐8 for targeted cancer photothermal‐chemotherapy17
Interfacial compliance, energy dissipation, frequency effects, and long‐term fretting corrosion performance of Ti‐6Al‐4V/CoCrMo interfaces17
Gallium (Ga)–strontium (Sr) layered double hydroxide composite coating on titanium substrates for enhanced osteogenic and antibacterial abilities17
Evaluation of the effect of 3D porous Chitosan‐alginate scaffold stiffness on breast cancer proliferation and migration17
Improvement of the mechanical and biological properties of bioactive glasses by the addition of zirconium oxide (ZrO2) as a synthetic bone graft substitute17
The effects of the molecular weight of chitosan on the tissue inflammatory response16
A collagen‐silica‐based biocomposite for potential application in bone tissue engineering16
Meloxicam encapsulated nanostructured colloidal self‐assembly for evaluating antitumor and anti‐inflammatory efficacy in 3D printed scaffolds16
Localized hydrogel delivery of dendritic cells for attenuation of multiple sclerosis in a murine model16
Bone substitutes and photobiomodulation in bone regeneration: A systematic review in animal experimental studies16
Application of a cationic amylose derivative loaded with single‐walled carbon nanotubes for gene delivery therapy and photothermal therapy of colorectal cancer15
Three‐dimensional‐printed polycaprolactone/polypyrrole conducting scaffolds for differentiation of human olfactory ecto‐mesenchymal stem cells into Schwann cell‐like phenotypes and promotio15
Biomimetic sponges improve muscle structure and function following volumetric muscle loss15
Polyvinyl alcohol and pectin blended films: Preparation, characterization, and mesenchymal stem cells attachment15
3D‐printed MgO nanoparticle loaded polycaprolactone β‐tricalcium phosphate composite scaffold for bone tissue engineering applications: In‐vitro and in‐vivo evaluation15
Suppression of NF‐κB‐induced chronic inflammation mitigates inflammatory osteolysis in the murine continuous polyethylene particle infusion model15
Controlling scaffold conductivity and pore size to direct myogenic cell alignment and differentiation15
Osteoblast‐derived extracellular matrix coated PLLA/silk fibroin composite nanofibers promote osteogenic differentiation of bone mesenchymal stem cells15
3D magnetic nanocomposite scaffolds enhanced the osteogenic capacities of rat bone mesenchymal stem cells in vitro and in a rat calvarial bone defect model by promoting cell adhesion15
Decellularization of porcine whole lung to obtain a clinical‐scale bioengineered scaffold14
Surface activation with oxygen plasma promotes osteogenesis with enhanced extracellular matrix formation in three‐dimensional microporous scaffolds14
Effects of beta‐tricalcium phosphate nanoparticles on the properties of a thermosensitive chitosan/collagen hydrogel and controlled release of quercetin14
Tunable alginate hydrogels as injectable drug delivery vehicles for optic neuropathy14
High porosity PEG‐based hydrogel foams with self‐tuning moisture balance as chronic wound dressings14
Antibacterial, conductive, and osteocompatible polyorganophosphazene microscaffolds for the repair of infectious calvarial defect14
Mechanisms of magnesium oxide‐incorporated electrospun membrane modulating inflammation and accelerating wound healing14
An in vitro assessment of the response of THP‐1 macrophages to varying stiffness of a glycol‐chitosan hydrogel for vocal fold tissue engineering applications14
Selection of natural biomaterials for micro‐tissue and organ‐on‐chip models14
Cyclic freeze–thaw grinding to decellularize meniscus for fabricating porous, elastic scaffolds14
Submicron topography design for controlling staphylococcal bacterial adhesion and biofilm formation14
Investigation on the antimicrobial properties of cerium‐doped bioactive glasses13
Electrical field stimulated modulation of cell fate of pre‐osteoblasts on PVDF/BT/MWCNT based electroactive biomaterials13
Three‐dimensional bioprinting of polysaccharide‐based self‐healing hydrogels with dual cross‐linking13
Tissue responses after implantation of biodegradable Mg alloys evaluated by multimodality 3D micro‐bioimaging in vivo13
Review on electrically conductive smart nerve guide conduit for peripheral nerve regeneration13
Nanodiamond‐chitosan functionalized hernia mesh for biocompatibility and antimicrobial activity13
The selection of photoinitiators for photopolymerization of biodegradable polymers and its application in digital light processing additive manufacturing13
Engineered nanoceria modulate neutrophil oxidative response to low doses of UV‐B radiation through the inhibition of reactive oxygen species production13
RGD‐pectin microfiber patches for guiding muscle tissue regeneration13
Decellularized peripheral nerve as an injectable delivery vehicle for neural applications13
A hydrogel platform for co‐delivery of immunomodulatory proteins for pancreatic islet allografts13
Analysis of oxidative degradation and calcification behavior of a silicone polycarbonate polyurethane‐polydimethylsiloxane material13
Effect of a plasma synthesized polypyrrole coverage on polylactic acid/hydroxyapatite scaffolds for bone tissue engineering12
Dexamethasone‐loaded β‐cyclodextrin for osteogenic induction of mesenchymal stem/progenitor cells and bone regeneration12
Assessment of electrospun cardiac patches made with sacrificial particles and polyurethane‐polycaprolactone blends12
Pro‐angiogenic decellularized vessel matrix gel modified by silk fibroin for rapid vascularization of tissue engineering scaffold12
Additively manufactured Ti‐29Nb‐21Zr shows improved oxide polarization resistance versus Ti‐6Al‐4V in inflammatory simulating solution12
3D‐printed bioresorbable poly(lactic‐co‐glycolic acid) and quantum‐dot nanocomposites: Scaffolds for enhanced bone mineralization and inbuilt co‐monitoring12
Kinetic degradation and biocompatibility evaluation of polycaprolactone‐based biologics delivery matrices for regenerative engineering of the rotator cuff12
Superporous agarose scaffolds for encapsulation of adult human islets and human stem‐cell‐derived β cells for intravascular bioartificial pancreas applications12
Utilization of GelMA with phosphate glass fibers for glial cell alignment12
Pegylated insulin‐like growth factor‐1 biotherapeutic delivery promotes rotator cuff regeneration in a rat model12
Elastin‐like protein hydrogels with controllable stress relaxation rate and stiffness modulate endothelial cell function12
Macrophage depletion increases target specificity of bone‐targeted nanoparticles12
Bone morphogenetic protein‐2 delivery from polyelectrolyte multilayers enhances osteogenic activity on nanostructured titania11
Balancing loading, cellular uptake, and toxicity of gelatin‐pluronic nanocomposite for drug delivery: Influence of HLB of pluronic11
3D printing of chitooligosaccharide‐polyethylene glycol diacrylate hydrogel inks for bone tissue regeneration11
Supramolecular nanotherapeutics enable metabolic reprogramming of tumor‐associated macrophages to inhibit tumor growth11
Heparin‐modified alginate microspheres enhance neovessel formation in hiPSC‐derived endothelial cells and heterocellular in vitro models by controlled release of vascular endoth11
Co‐culture with peritoneum mesothelial stem cells supports the in vitro growth of mouse ovarian follicles11
Can strontium replace calcium in bioactive materials for dental applications?11
Macrophage polarization in vitro and in vivo modified by contact with fragmented chitosan hydrogel11
Polyacrylamide‐based hydrogel coatings improve biocompatibility of implanted pump devices11
Enhanced osteogenic potential of unzipped carbon nanotubes for tissue engineering11
Preparation and characterization of silk fibroin/polyethylene oxide nanofiber membranes with antibacterial activity11
Decellularization of cartilage microparticles: Effects of temperature, supercritical carbon dioxide and ultrasound on biochemical, mechanical, and biological properties11
Photocurable antimicrobial silk‐based hydrogels for corneal repair10
Bioactive composite hydrogels as 3D mesenchymal stem cell encapsulation environment for bone tissue engineering: in vitro and in vivo studies10
Characterization and optimization of de‐esterified Tragacanth‐chitosan nanocomposite as a potential carrier for oral delivery of insulin: In vitro and ex vivo studies10
Hyaluronic acid/gelatin microcapsule functionalized with carbon nanotube through laccase‐catalyzed crosslinking for fabrication of cardiac microtissue10
Investigation of human adipose‐derived stem‐cell behavior using a cell‐instructive polydopamine‐coated gelatin–alginate hydrogel10
Ultrasound‐derived mechanical stimulation of cell‐laden collagen hydrogels for bone repair10
Modulation of the inflammatory response to decellularized collagen matrix for cartilage regeneration10
Effect of surface topography on in vitro osteoblast function and mechanical performance of 3D printed titanium10
Effects of a novel self‐assembling peptide scaffold on bone regeneration and controlled release of two growth factors10
Design of new drug delivery platform based on surface functionalization of black phosphorus nanosheet with a smart polymer for enhancing the efficiency of doxorubicin in the treatment of cancer10
Mg(OH)2 nanoparticles enhance the antibacterial activities of macrophages by activating the reactive oxygen species10
Three‐dimensional printing of cell‐laden microporous constructs using blended bioinks10
Enhanced neural differentiation of human‐induced pluripotent stem cells on aligned laminin‐functionalized polyethersulfone nanofibers; a comparison between aligned and random fibers on neurogenesis10
Prevention of medical device infections via multi‐action nitric oxide and chlorhexidine diacetate releasing medical grade silicone biointerfaces9
Efficacy of marine bioactive compound fucoidan for bone regeneration and implant fixation in sheep9
The experimental study of regeneration of annulus fibrosus using decellularized annulus fibrosus matrix/poly(ether carbonate urethane)urea‐blended fibrous scaffolds with varying elastic moduli9
The performance of heparin modified poly(ε‐caprolactone) small diameter tissue engineering vascular graft in canine—A long‐term pilot experiment in vivo9
Size‐dependent osteogenesis of black phosphorus in nanocomposite hydrogel scaffolds9
Bacterial protease‐responsive shape memory polymers for infection surveillance and biofilm inhibition in chronic wounds9
Engineering high throughput screening platforms of cervical cancer9
Electrochemical behavior, biocompatibility and mechanical performance of biodegradable iron withPEIcoating9
Formulation and characterization of hydroxyapatite‐based composite with enhanced compressive strength and controlled antibiotic release9
Benefit of coupling heparin to crosslinked collagen I/III scaffolds for human dermal fibroblast subpopulations' tissue growth9
Engineering synthetic poly(ethylene) glycol‐based hydrogels compatible with injection molding biofabrication9
Bone regeneration in both small and large preclinical bone defect models using an injectable polymer‐based substitute containing hydroxyapatite and reconstituted with saline or autologous blood9
Promoting endogenous repair of skeletal muscle using regenerative biomaterials9
Bioinspired electrospun decellularized extracellular matrix scaffolds promote muscle regeneration in a rat skeletal muscle defect model9
Cancer cell membrane‐derived nanoparticles block the expression of immune checkpoint proteins on cancer cells and coordinate modulatory activity on immunosuppressive macrophages9
Optimization of methacrylated gelatin /layered double hydroxides nanocomposite cell‐laden hydrogel bioinks with high printability for 3D extrusion bioprinting9
Black phosphorus incorporation modulates nanocomposite hydrogel properties and subsequent MC3T3 cell attachment, proliferation, and differentiation9
Synergistic effects of fluid shear stress and adhesion morphology on the apoptosis and osteogenesis of mesenchymal stem cells9
Fibronectin grafting to enhance skin sealing around transcutaneous titanium implant9
Shape memory polymer hydrogels with cell‐responsive degradation mechanisms for Crohn's fistula closure9
Compatibility and function of human induced pluripotent stem cell derived cardiomyocytes on an electrospun nanofibrous scaffold, generated from an ionomeric polyurethane composite9
Spatiotemporal histological changes observed in mouse subcutaneous tissues during the foreign body reaction to silicone8
In vitro osteogenic performance of two novel strontium and zinc‐containing glass polyalkenoate cements8
Comparative efficacy of resorbable fiber wraps loaded with gentamicin sulfate or gallium maltolate in the treatment of osteomyelitis8
Specific bio‐functionalCBD‐PR1Ppeptide bindingVEGFto collagen hydrogels promotes the recovery of cerebral ischemia in rats8
Effect of bioactive Biosilicate®/F18 glass scaffolds on osteogenic differentiation of human adipose stem cells8
Preparation of a novel bovine cancellous bone/poly‐amino acid composite with low immunogenicity, proper strength, and cytocompatibility in vitro8
Tyrosine‐derived polycarbonate nerve guidance tubes elicit proregenerative extracellular matrix deposition when used to bridge segmental nerve defects in swine8
Reconstruction of critical‐size segmental defects in rat femurs using carbonate apatite honeycomb scaffolds8
Albumin covering maintains endothelial function upon magnetic iron oxide nanoparticles intravenous injection in rats8
Inhibition of osteoclast activities by SCPC bioceramic promotes osteoblast‐mediated graft resorption and osteogenic differentiation8
Magnetic fields enable precise spatial control over electrospun fiber alignment for fabricating complex gradient materials8
Endogenous FGF‐2 levels impact FGF‐2/BMP‐2 growth factor delivery dosing in aged murine calvarial bone defects8
3D bioprinting of gellan gum‐based hydrogels tethered with laminin‐derived peptides for improved cellular behavior8
Investigating the effect of multi‐coated hydrogel layer on characteristics of electrospun PCL membrane coated with gelatin/silver nanoparticles for wound dressing application8
Mechanical performance of collagen gels is dependent on purity, α1/α2 ratio, and telopeptides8
Physicochemical aspects of design of ultrathin films based on chitosan, pectin, and their silver nanocomposites with antiadhesive and bactericidal potential8
Visible light–induced cross‐linking of porcine pericardium for the improvement of endothelialization, anti‐tearing, and anticalcification properties8
Engineered synthetic cell penetrating peptide with intracellular anti‐inflammatory bioactivity: An in vitro and in vivo study7
Smooth muscle matrix bioink promotes myogenic differentiation of encapsulated adipose‐derived stem cells7
Tackling catheter‐associated urinary tract infections with next‐generation antimicrobial technologies7
Inflammation and immunity gene expression profiling of macrophages on mineralized collagen7
Electroconductive agarose hydrogels modulate mesenchymal stromal cell adhesion and spreading through protein adsorption7
Incorporating a structural extracellular matrix gradient into a porcine urinary bladder matrix‐based hydrogel dermal scaffold7
Biomaterials‐based nanoparticles conjugated to regulatory T cells provide a modular system for localized delivery of pharmacotherapeutic agents7
Feasibility study of oxidized naringin as a novel crosslinking agent for crosslinking decellularized porcine Achilles tendon and its potential application for anterior cruciate ligament rep7
Inhibitory effects of orthosilicic acid on osteoclastogenesis in RANKL‐stimulated RAW264.7 cells7
Fabrication and characterization of Ag‐ and Ga‐doped mesoporous glass‐coated scaffolds based on natural marine sponges with improved mechanical properties7
Characterization of the foreign body response of titanium implants modified with polyphenolic coatings7
Incorporating nanoconfined chitinfibrils in poly (ε‐caprolactone) membrane scaffolds improves mechanical and chemical properties for biomedical application7
Capillary‐size flow of human blood plasma: Revealing hidden elasticity and scale dependence7
The post‐processing temperature or humidity can importantly control the secondary structure and characteristics of silk fibroin films7
Elucidating the combinatorial effect of substrate stiffness and surface viscoelasticity on cellular phenotype7
Injectable hydrogel as a carrier of vancomycin and a cathelicidin‐derived peptide for osteomyelitis treatment7
Regional gene therapy for bone healing using a 3D printed scaffold in a rat femoral defect model7
Preparation and biological characteristics of a bovine acellular tendon fiber material7
Evaluation of reproducible cryogel preparation based on automated image analysis using deep learning7
Characterization and analysis of extended‐wear silicone hydrogel contact lenses utilizing novel silicone macromers7
Investigation of water‐insoluble hydrophobic polyethylenimines as RNAi vehicles in chronic myeloid leukemia therapy7
Versatility of unsaturated polyesters from electrospun macrolactones:RGDimmobilization to increase cell attachment7
Effect of heparinization on promoting angiogenesis of decellularized kidney scaffolds7
Influence of polypropylene mesh degradation on tissue inflammatory reaction7
Cell‐instructive biomaterials in tissue engineering and regenerative medicine7
Enhanced osteogenic and antibacterial properties of polyetheretherketone by ultraviolet‐initiated grafting polymerization of a gelatin methacryloyl/epsilon‐poly‐L‐lysine/laponite hydrogel coating7
Characterization of chondroitinase‐induced lumbar intervertebral disc degeneration in a sheep model intended for assessing biomaterials7
Genipin‐crosslinked collagen scaffolds inducing chondrogenesis: a mechanical and biological characterization7
0.4544370174408