International Journal of Green Energy

Papers
(The median citation count of International Journal of Green Energy is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-10-01 to 2025-10-01.)
ArticleCitations
Collision dynamics of binary equal-size droplets at high pressures: a focus on stretching separation and reflexive separation77
Modeling and analysis of vertical axis turbine with pitch adjusted by an eccentric guide46
Numerical investigation on the operation strategy of a chemisorption heat pump system42
Performance evaluation of proton exchange membrane fuel cells adopting rectangular-baffle and tapered flow channels with an equivalent average depth37
The study on the performance of air-cooled open-cathode PEMFC with dead-ended anode34
Enhanced offshore wind power forecasting through multiscale time series decomposition and temporal pattern attention mechanisms33
Developing the machine learning models to estimate thermodynamic and transport properties of refrigerants33
Wind farm site suitability assessment & validation using geospatially explicit multi-criteria approach: A case study of South Sikkim, India33
The effect of runner installation and design on the performance of gravitational vortex water turbine29
Life cycle assessment of four black liquor combustion scenarios from the insights of environment, technology and economy28
Comparing the transition from fossil fuels to green energy in the United States and Africa26
Modeling of conversion kinetics in bioenergy production technologies25
Carbon dioxide conversion to value-added products and fuels: opportunities and challenges: a critical review25
ASSESSMENT OF WIND ENERGY IN INDIA AT THE NATIONAL AND SUB- NATIONAL LEVEL: ATTRIBUTIONAL LCA EXERCISE25
Biochar: a sustainable and an eco-friendly material for energy storage applications25
Thermal management of lithium-ion batteries based on the coupling of liquid cooling and composite phase change materials25
Experimental investigations on a sensible heat thermal energy storage system towards the design of cascaded latent heat storage system24
A numerical evaluation of felt electrodes in a vanadium redox flow battery24
Numerical investigation of coupling effects of gradient porous electrode and flow channel pattern on iron-vanadium redox flow battery24
A review: diffuser augmented wind turbine technologies24
Evaluating the cost impacts to meet China’s renewable electricity portfolio standard target in 203023
Source-load joint forecasting of office building electro-thermal integrated energy systems based on multi-task learning and dynamic optimal integration23
Electrochemical analysis of electrolyte temperature and composition for all-iron redox flow battery22
Effect of a narrow channel inserted in the conventional ice block mold with brine injection on the productivity and ice formation behavior of the low temperature brine bathing ice production process22
ResBlock-BiGRU-IAT: A hybrid model integrating residual convolution and improved attention mechanism for accurate prognostics in PEMFC22
Design and performance evaluation of an ocean energy harvester for sea monitoring node22
Improved artificial hummingbird algorithm based on dimensional differential and its application in photovoltaic model parameter identification22
Optimized scheduling study of integrated energy system considering user response characteristics21
Comprehensive comparison of global mechanisms for methane combustion optimized using artificial neural network21
Performance enhancement of a photovoltaic thermal (PVT) system with sinusoidal fins: A quasi-transient energy-exergy analysis20
Construction, testing and performance analysis of a multi-stage traveling-wave thermo-acoustic generator20
Operation strategies design and optimal storage capacity selection of PV-energy storage systems for residential houses under different electricity price modes20
Improving the prediction of biochar production from various biomass sources through the implementation of eXplainable machine learning approaches20
A comparative performance analysis of electrical equivalent circuit models with the hysteresis effect of lithium iron phosphate batteries20
Airflow management and energy saving potentials at a high-density data center with stepped-like server placement20
Multistep prediction of remaining useful life of proton exchange membrane fuel cell based on temporal convolutional network19
Energy performance enhancement of PV system through proposed back cooling techniques and natural air draft: an experimental study19
Low-carbon economic transformation plan of isolated grid wind-photovoltaic-thermal system based on large-scale energy storage technology19
Carbon combustion coupled hydrogen production via SOEC with ultra-low power consumption18
Enhancing photovoltaic module cells defect detection by lightweight feature extraction and multiscale feature fusion network module18
Valorization of oleochemical waste as feedstock for biodiesel production using industrial ash waste magnetic-based catalyst18
Identifying route-wise energy-saving driving operations of electric buses with real-word measurements18
Key cavern construction technologies and scientific challenges of China’s lake-type salt rock gas storage facilities17
Research advances on metal fuels without carbon dioxide emissions17
Evaluating risk propagation in renewable energy incidents using ontology-based Bayesian networks extracted from news reports17
An enhanced palm oil pyrolysis to bio-oil using dolomite-derived ZnO/CaO composite17
Balancing AI’s energy consumption with commitments to clean energy (SDG 7): Is there a trade-off?17
Quantitative analysis of impact factors and scenario prediction of energy related carbon emissions at county level17
Estimating of energy consumption of electric vehicles under different road characteristics: a case study for Nanjing, China17
Ex-situ experimental study on extraction of droplet dynamic parameters based on droplet shape in PEMFC17
Energy and exergy based study on a box type solar cooker coupled with a Fresnel lens magnifier16
Investigation on a novel post-combustion CO2 capture rotary adsorption wheel based on temperature swing adsorption16
Performance of an air gap membrane distillation system and enhancement using a low-cost surface modification16
An intelligent digital twin model for the battery management systems of electric vehicles16
An overview of photocatalytic degradation of agricultural pollutants in water16
Clean energy technologies for a net-zero emissions future: an editorial for the special issue comprising of the selected papers presented at the 13th and 14th International Green15
Effects of membrane swelling on structural deformation and performance of proton exchange membrane fuel cell15
Pyrolysis and gasification of energy crops for phytoremediation in Romania’s coal mining region15
Development of a comprehensive transient fuel cell-battery hybrid system model and rule-based energy management strategy15
Life cycle assessment of biodiesel production using a nonionic surfactant and CaO from eggshell as a catalyst14
Feasibility study of offshore wind energy on the coast of Sri Lanka14
On the accuracy of Long Short Term Memory (LSTM) in solar irradiance forecasting: A meta-analysis and meta-regression14
Optimal user-defined directional overcurrent relay coordination considering different operating modes of microgrid14
Experimental performance analysis of evacuated tube type direct-expansion solar-assisted heat pump system13
Electrochemical performance of binder-free Ni(OH)2/RGO battery type electrode materials for supercapacitor13
A feasibility study for PV installations in higher education institutions – a case study13
Analysis on failure test and evaluation about refueling receptacle of onboard hydrogen system13
Biocrude production via hydrothermal liquefaction of cycas circinalis seed shell: A machine learning approach13
Leveraging temporal dependencies and feature correlations in a hybrid graph-transformer model for enhanced long-term photovoltaic power forecasting13
Bi-level convex optimization speed planning algorithm for pure electric buses under multi-factor urban road conditions13
Hydrothermal synthesis of ZnS on monolayer MXene(Ti 3 C 2 T x ) for degradation of organics und13
A physically interpretable two-stream spatio-temporal attention framework for predicting the power of offshore wind farms: A case study in the South China Sea12
A 4750 hours’ durability investigation of the PEMFC stack based on fuel cell hybrid vehicles conditions12
Impacts of environmental regulation and innovation-driven upgrading on carbon emission: Evidence from China12
Performance investigation of novel zigzag flow field in PEMFC with metal bipolar plates considering cooling flow channels12
Effect of assembly pressure on bipolar plate and gas diffusion layer performance of proton exchange membrane fuel cell11
Does the change in incentive policies promote renewable energy power generation in China?11
Unveiling the impact of climate diversity on solar PV soiling11
Synergistic effect mechanism of Sm modification and SiC carrier on MnCe catalyst for low-temperature NH 3 -SCR11
Two-stage stochastic optimization of virtual power plant with wind power and uncertain demand11
Demand management and pricing in renewable integrated plug-in electric vehicle charging station using reinforcement learning11
Fault diagnosis of lithium-ion batteries based on wavelet packet decomposition and Manhattan average distance11
A hybrid deep learning methodology for wind power forecasting based on attention11
Investigation of non-uniform temperature distribution in air-cooled proton exchange membrane fuel cells with multizone temperature measurement11
Consistency analysis and resistance network design for vanadium redox flow battery stacks with a cell-resolved stack model10
Methane partial oxidation with Ni-Mg-Al hydrotalcites: Impact of magnesium on catalyst performance10
A comprehensive review of thermal runaway for batteries: experimental; modelling, challenges and proposed framework10
Experimental investigation of operating characteristics of proton exchange membrane fuel cell with different anode strategies based on the segmented cell10
Ceria-based redox materials for thermochemical looping fuel generation: A review10
Enhancing biogas production by anaerobic digestion of animal manure10
Performance enhancement of the photovoltaic module using a semicircular serpentine channel with binary fluids mixture10
Surface decoration of ceria nanoparticles as propane/air partial oxidation catalyst integrated in a micro-tubular solid oxide fuel cell10
Statement of Retraction: Nanomaterials for sustainable water splitting towards green hydrogen production10
Maximizing techno-economic-environmental benefits of renewable energy allocation with smart inverter in distribution system: a two-layer stochastic optimization framework10
Two-phase mass transporting under various operating conditions during mode switching of unitized regenerative fuel cell with non-uniform flow channels9
Navigation-based model predictive control of energy management for a serials-parallel plug-in hybrid electric vehicle9
Optimal scheduling of multi-energy hubs considering carbon trading and its benefit allocation9
Numerical simulation of holomorphic microscopic metal foam as cathode flow field in proton exchange membrane fuel cells9
Enhanced accuracy in solar irradiance forecasting through machine learning stack-based ensemble approach9
A novel residual-pyramid-attention super resolution model for mesoscale meteorological forecasting spatial downscaling9
Evaluating energy poverty in rural areas and exploring its correlation with carbon dioxide emissions: Evidence from rural China9
Local heat transfer enhancement by recirculation flows for temperature gradient reduction in a tubular SOFC9
A self-powered flexible sensor based on thermoelectric generation for NO 2 gas detection9
Vital health indicator based state of health estimation of lithium-ion battery by adaptive neuro-fuzzy inference system9
Block structure optimization in PEMFC flow channels using a data-driven surrogate model based on random forest9
Optimal deployment of CCUS networks coupled carbon capture technologies with tax incentive policy9
Numerical simulation of the residual stress and failure probability of solid oxide fuel cells with nonplanar cathode–electrolyte interfaces9
Water management on hydrogen-oxygen proton exchange membrane fuel cell with dead-ended anode and cathode9
Processing wet microalgae for direct biodiesel production: optimization of the two-stage process assisted by radio frequency heating8
An end-cloud collaboration approach for state-of-health estimation of lithium-ion batteries based on bi-LSTM with collaboration of multi-feature and attention mechanism8
Good vs bad returns spillover in regional energy markets8
Assessing the impact of three emission (3E) parameters on environmental quality in Canada: A provincial data analysis using the quantiles via moments approach8
Mn-doped NiTiO 3 catalysts for hydrogen production via auto-thermal reforming of acetic acid8
Research on electrical ageing characteristic of flexible photovoltaic insulating backsheet after ultraviolet radiation8
Sustainable strategies for reducing environmental impact in concrete block manufacturing: a comprehensive life cycle assessment8
Investigation of hydrogen-LPG mixtures in industrial boilers: Impacts on flame characteristics, emissions, and heat transfers8
Experimental study on current density distribution characteristics in a novel oxygen recirculation system of dead-ended proton exchange membrane fuel cell8
Online estimation of lithium-ion battery health status based on transfer learning and deep neural network8
Evolution characteristics of ammonia and water vapor in the drying process of sewage sludge: Combined effect of drying temperature and cooling water8
Two-stage stochastic programming of a hybrid SOFC-renewable integrated energy system considering time sequence correlation8
Intensification of interesterification of sustainable feedstock as mahua oil for biodiesel production8
Revolutionizing green energy: Natural gas, shale gas technology, and ecological footprint in the USA8
Deep learning approach for one-hour ahead forecasting of solar radiation in different climate regions8
Remaining useful life prediction of proton exchange membrane fuel cell based on Wiener process and Bayesian GRU network considering multi-source uncertainties8
An overview of blade materials and technologies for hydrokinetic turbine application8
Assessing electric mobility and renewable energy synergy in a small New Caledonia Island community8
Study on failure mechanism of ferrule sealing for fuel cell vehicles under low-temperature environment8
Design and energy analysis of solid oxide fuel cell and gas turbine hybrid systems with membrane reactor8
The dynamic risk spillover of higher-order moments in the China’s energy market: A time-frequency perspective8
Optimization of operating parameters for boosting the performance of the PEMEC by the response surface methodology7
Comparative study of Gurney flap and straight upstream deflector as performance enhancement of lift-driven vertical axis wind turbines7
Thermodynamic properties of non-azeotropic refrigerant heat pumps under full operating conditions with non-phase-change heat sinks and heat soucres7
Battery state of health prediction based on voltage intervals, BP neural network and genetic algorithm7
Hydrogen storage based micro-grid: A comprehensive review on technology, energy management and planning techniques7
Does human capital development impact nonrenewable energy use? Evidence from a developing economy7
Optimal location and sizing of distributed generation for distribution systems: An improved analytical technique7
Bayesian-optimized-CNN-LSTM-based performance prediction for organic Rankine cycle system with cyclopentane7
Towards greener buildings: A review on the role of fluidic windows with embedded microfluidic channels for energy saving in the building setups7
Review of safety regulations, codes, and standards (RCS) for hydrogen distribution and application7
Experimental study on the comparative performance of R1233zd(E) and R123 for organic rankine cycle for engine waste heat recovery7
Prediction of greenhouse gas emissions in Türkiye with long short-term memory (LSTM) and 1-dimensional convolutional neural network (1-DCNN) algorithms7
Experimental investigation of a monitoring model for dust deposition on solar photovoltaic modules7
Performance enhancement of photovoltaic module using a sun tracker with side reflectors (STSR system)7
Feasibility verification of reducing the total sound pressure level of multiple cooling fans for fuel cell vehicle7
Performance of CO2 electrolysis using solid oxide electrolysis cell with Ni-YSZ as fuel electrode under different fuel atmospheres7
The combustion and emission characteristics of pure methanol as a substitute fuel for compression ignition engines7
Design and operational control methodology for large-scale photovoltaic system in green port application7
Recent research progress of redox flow batteries based on deep eutectic solvents (DESs)7
Low-cost marine biomass carbon as a high-performance electrocatalyst for vanadium redox flow battery7
Coupled trajectory optimization and tuning of tracking controllers for parafoil generator7
Transfer learning and source domain restructuring-based BiLSTM approach for building energy consumption prediction7
Modeling analysis of the stress and displacement on stack end plate for the all-vanadium redox flow battery7
Thermodynamic evaluation of two-stage refrigeration cycle with deep intercooling and series-parallel integration of thermal and mechanical compression7
Online optimization of boiler operation based on information integration and case-based reasoning7
Model-based optimization for combined interdigitated and serpentine flow field in redox flow batteries7
Bilevel planning of electric vehicle charging station and battery swapping station considering real-time uncertainty7
Parametric study of design factors on the performance of flexible solar modules6
Enhancing waste cooking oil biodiesel yield and characteristics through machine learning, response surface methodology, and genetic algorithms for optimal utilization in CI engines6
Lifetime evaluation and material failure analysis of a PEMFC prepared using commercial materials6
Optimizing energy management strategies for hybrid electric ships based on condition identification and model predictive control6
Low carbon economic scheduling of integrated energy system with concentrating solar power and multi-stage hydrogen utilization based on ladder-type carbon trading6
Experimental and kinetic modeling of CO 2 hydrogenation to methanol over Cu/ZnO/ZrO 2 catalysts6
Experimental analysis of the recovery and chemical properties of pyrolytic oil derived from medical waste with varying components combined via a systematic combination approach6
Long-term wind power forecasting with series decomposition and spatio-temporal graph neural network6
Event-driven dynamic scheduling of mixed-flow shop of architectural ceramic forming process considering energy-saving6
Smart grid mechanism for green energy management: A comprehensive review6
Does eco-innovation foster or hinder environmental performance? Recent evidence from Europe6
Molecular dynamics simulation of the inhibition effects of inert gases (Ar/He/N 2 ) on hydrogen oxidation6
Location optimization of electric vehicle chargers, photovoltaic generation, and vehicle to grid point of connection for minimizing voltage harmonic levels in low voltage power distribution networks6
Nanocatalysts in direct liquid fuel cells: Advancements for superior performance and energy sustainability6
Influence of suction flow control on energy extraction characteristics of flapping foil6
Design optimization with genetic algorithm of open slotted axial flux permanent magnet generator for wind turbines6
Review on the optimization studies of reverse cycle defrosting for air source heat pump units with multi-circuit outdoor coils6
Component fabrication techniques for solid oxide fuel cell (SOFC) – A comprehensive review and future prospects6
Research on solar-assisted ejector-enhanced air source heat pump cycle with dual-pressure condensation6
Recent technologies in second-generation bioethanol production from biomass: A review6
Analysis of modified CO 2 based combined power and ejector-expansion refrigeration cycle with dual evaporators activated by engine exhaust6
Proposal and thermo-economic analysis of a novel multi-generation system producing heating, power and clean water under energetically self-sufficient operation6
Wind farm optimization by active yaw control strategy using machine learning approach6
Optimal supply chain design of biodiesel production using black soldier fly larvae oil as feedstock5
Strategic integration of single flash geothermal steam cycle (SFGSC) and ejector assisted dual-evaporator organic flash refrigeration cycle (EADEOFRC) for power and multi-temperature cooling: 2nd law 5
Performance study of cooling plates with single and double outlets for lithium-ion battery thermal management system based on topology optimization5
Optimal allocation of open unified power quality conditioner in integrated distribution system environment with renewable energy sources5
Numerical simulation and analysis of the thermal stresses of a planar solid oxide electrolysis cell5
Biodiesel from fats: Fatty acid feedstock as a circular economy solution5
Valorization of anaerobic digestate: innovative approaches for sustainable resource management and energy production - case studies from Turkey and Poland5
Multi-source data-driven autoregressive feedforward GAN for ultra-short-term PV power forecasting5
Comprehensive thermo-fluid analysis of staggered rib arc roughness in single pass solar air heater duct5
Influence study of bottom cycle ratios and superheat for vessels waste heat cascade recovery based on TEG-ORC combined cycle system employing R245fa5
Degradation study of gas-diffusion layers in proton exchange membrane fuel cell through acid dissolution and oxidation5
Speed control of a DFIG-based wind turbine using a new generation of ADRC5
Copper-tin catalyzed methane pyrolysis and solid carbon products as anode materials for sodium-ion batteries5
Numerical investigation of block structure parameters on liquid water removal in novel block flow channels of PEMFC5
Development and testing of a PCM enhanced domestic refrigerator with use of miniature DC compressor for weak/off grid locations5
Insights into sono-electrochemical advances for hydrogen production: An in-depth analysis5
Role of morphological arrangements in cellulose nanofiber-based aerogels for thermal insulation: A systematic review5
Solar photovoltaic system under partial shading and perspectives on maximum utilization of the shaded land5
A surrogate-assisted evolutionary algorithm with an adaptive sample selection strategy for wind farm layout optimization5
A mini review of the effect of modified carbon paper, carbon felt, and carbon cloth electrodes on the performance of microbial fuel cell5
A novel sensor preference method for proton exchange membrane fuel cell flooding fault diagnosis based on multi-algorithm5
A comprehensive thermo-kinetics devolatilization analysis of waste motor oil: Thermal degradation kinetics, kinetic model, thermodynamic analysis, and ANN5
Investigation of assisted heating cold start strategies from -40 °C for proton exchange membrane fuel cell stack5
A novel Bagged-CNN architecture for short-term wind power forecasting5
Evaluation of residential stand alone photovoltaic systems in mega cities of the world5
Cell voltage and two-phase flow in a unitized regenerative fuel cell operating in alternate fuel cell and electrolytic cell modes5
Model-based humidity observer for vehicle proton exchange membrane fuel cell based on a new sliding mode observer estimation technique5
Optical investigations on ignition and combustion characteristics of polyoxymethylene dimethyl ethers/methanol blends5
Regional forecasting of wind speed in large scale wind plants5
State of charge estimation of lithium-ion battery based on TSCSO-GRU-Attention5
Advances, progress and challenges of NiCo 2 O 4 -based composite materials for direct methanol fuel cell applications: A critical 5
Modeling the spray characteristics of blended fuels for gasoline direct injection applications5
Enhanced biodiesel properties of Auxenochlorella sp. using chemical mutagenesis and Tralkoxydim5
Multi-objective optimization of an absorption solar-ground source heat pump considering the environmental and economic performance5
Advancement in solar air heater with integrated PCM-based thermal energy storage system5
Potential and comparative studies of six non-edible seed oil feedstock’s for biodiesel production5
An energy consumption prediction model for electric buses based on extreme gradient boosting fusion algorithm5
Developing new solar radiation estimation models with machine learning techniques and testing their efficiency in various places5
Renewable energy development and carbon productivity in OECD countries: A new perspective on the internal mix of renewable energy5
Prediction of electric vehicle battery state of health estimation using a hybrid deep learning mechanism5
Expanding the horizon of biodiesel production via enzyme engineering4
Climate change and energy transition - a critical review4
Promoting ion and heat transfer of solid polymer electrolytes by tuning polymer chain length and salt concentration4
A short-term power prediction method based on the transformation of multi-source spatiotemporal feature for photovoltaic cluster4
Modeling ammonia-fueled co-flow dual-channel protonic-ceramic fuel cells4
Examining the applicability of China’s green building evaluation: Perspective of pre-assessment by developers4
A distribution-PMU-based islanding detection approach for active distribution networks4
Optimization of the boosted photocatalytic H 2 production by rationally designated Cd x Zn 1-x 4
Diffusive and convective mass transportations in proton exchange membrane fuel cells with orientational flow channels having porous blocks4
A novel multi-stack fuel cell hybrid system energy management strategy for improving the fuel cell durability of the hydrogen electric Multiple Units4
Theoretical and experimental investigation of electrical double layer capacitance of LiClO4-interacted metal substrates and carbon-coated nickel electrode4
A coarse-to-fine ensemble method for capacity prediction of lithium-ion batteries in production4
Design and operation of organic Rankine cycles for varied power load4
Effects of intake high-pressure compressed air on thermal-work conversion in a stationary diesel engine4
Sizing of an organic rankine cycle cogeneration plant fueled with woody biomass: Application to an integrated wood pellet production unit4
Aerodynamic analysis of a 2-stage elliptical-bladed Savonius wind rotor: Numerical simulation and experimental validation4
Digital twins based fault diagnosis and reconfiguration of high gain topology for utility level PV system4
Exploring and visualizing co-patent networks in bioenergy field: A perspective from inventor, transnational inventor, and country4
Direct Normal Irradiance (DNI) simulation through Empirical Approach for Concentrating Solar Power (CSP) Projects4
Improvement of an open sun drying system for dried banana product using solar tracking system: a case study in Thailand4
Lifetime prediction of proton exchange membrane fuel cell based on long short-term memory neural network optimized by improved Grey Wolf algorithm4
Review of ionomers in catalyst layers of proton exchange membrane (PEM) modules: key parameters, characterization and manipulation methods4
Space solar power project and a theoretically performable solar energy policy with some proposed improvement measures for energy transition in the future4
Full-scale multiphase simulation of automobile PEM fuel cells with different flow field configurations4
Wind power forecasting based on a machine learning model: considering a coastal wind farm in Zhejiang as an example4
Explore driving factors to energy consumption of electric vehicles based on structural equation modeling4
Prediction of thermo-physical properties and evaluation of thermal energy storage performance of phase change materials based on silicone rubber/graphite (Q/G) composites4
An improved particle swarm optimization-least squares support vector machine-unscented Kalman filtering algorithm on SOC estimation of lithium-ion battery4
Development and industrialization progress of solid oxide cell in China4
Low-carbon optimal dispatch strategy of power systems considering the combined operation of oxy-fuel combustion and electric hydrogen production4
Characteristics of changes in hazardous elements and heavy metals during pyrolysis treatment of oily sludge4
0.43202614784241