OOIR: Observatory of International Research

Papers

(The median citation count of International Journal for Multiscale Computational Engineering is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-03-01 to 2024-03-01.)

Article	Citations
A CONCURRENT MICRO/MACRO FE-MODEL OPTIMIZED WITH A LIMIT ANALYSIS TOOL FOR THE ASSESSMENT OF DRY-JOINT MASONRY STRUCTURES	30
BIOMECHANICAL EVALUATION OF MARGINAL BONE LOSS IN THE SURROUNDING BONE UNDER DIFFERENT LOADING: 3D FINITE ELEMENT ANALYSIS STUDY	16
3D TENSEGRITY BRACES WITH SUPERELASTIC RESPONSE FOR SEISMIC CONTROL	13
EFFICIENT MULTISCALE RECURSIVE MICROMECHANICS OF COMPOSITES FOR ENGINEERING APPLICATIONS	13
ON DYNAMICS OF ELASTIC NETWORKS WITH RIGID JUNCTIONS WITHIN NONLINEAR MICRO-POLAR ELASTICITY	10
MULTISCALING-BASED INTEGRATED COMPUTATIONAL MATERIALS ENGINEERING: FROM ACADEMIA TO INDUSTRY	8
A MULTISCALE VISION-ILLUSTRATIVE APPLICATIONS FROM BIOLOGY TO ENGINEERING	8
MULTISCALE MODELING FOR THE SCIENCE AND ENGINEERING OF MATERIALS	7
SHOCK WAVES IN BIOLOGICAL TISSUES UNDER TELEGRAPH EQUATION HEAT CONDUCTION	7
NONLINEAR FE ANALYSIS OF A MASONRY SPIRAL STAIRCASE IN NISIDA: A REFINED NUMERICAL CASE STUDY	7
MULTISCALE HOMOGENIZATION AND ANALYSIS OF ANISOTROPIC ASSEMBLIES AS COSSERAT CONTINUA	7
MULTISCALE MODEL WITH EMBEDDED DISCONTINUITY DISCRETE APPROXIMATION CAPABLE OF REPRESENTING FULL SET OF 3D FAILURE MODES FOR HETEROGENEOUS MATERIALS WITH NO SCALE SEPARATION	7
COUPLED CRYSTAL PLASTICITY PHASE-FIELD MODEL FOR DUCTILE FRACTURE IN POLYCRYSTALLINE MICROSTRUCTURES	6
COUPLING A GEOMECHANICAL RESERVOIR AND FRACTURING SIMULATOR WITH A WELLBORE MODEL FOR HORIZONTAL INJECTION WELLS	6
A MULTIRESOLUTION ADAPTIVE WAVELET METHOD FOR NONLINEAR PARTIAL DIFFERENTIAL EQUATIONS	5
SHELL-3D MULTISCALE MODELING OF MASONRY VAULTS BASED ON THE TFA PROCEDURE	5
OPTIMIZATION OF BONE GRAFT SHAPES OF S-TYPE CERVICAL CAGE THROUGH GENETIC ALGORITHM	5
INVERSE PROBLEMS IN THE LIGHT OF HOMOGENIZATION METHODS: IDENTIFICATION OF A COMPOSITE MICROSTRUCTURE	5
IMPACT OF INTERPENETRATING PHASE Al-Sil2/SiC	5
PROPAGATION OF NONLINEAR BENDING WAVES IN HYSTERETIC BEAMS	5
AN OPEN-SOURCE MATLAB IMPLEMENTATION FOR ELASTIC ANALYSES OF HETEROGENEOUS MATERIALS USING THE EXTENDED MULTISCALE FINITE ELEMENT METHOD	4
BAYESIAN INVERSION USING GLOBAL-LOCAL FORWARD MODELS APPLIED TO FRACTURE PROPAGATION IN POROUS MEDIA	4
PHASE FIELD MODELING OF NORMAL AND STRESSED GRAIN GROWTH: THE EFFECT OF RVE SIZE AND MICROSCOPIC BOUNDARY CONDITIONS	4
A CONCURRENT MULTISCALE APPROACH FOR FRACTURING OF BRITTLE COMPOSITES BASED ON THE SUPERPOSITION-BASED PHASE FIELD MODEL	4
USING MULTISCALE MODELING TO ADVANCE INDUSTRIAL AND RESEARCH APPLICATIONS OF ADVANCED MATERIALS	4

FRAMEWORK FOR TOUCHLESS PATIENT MONITORING SYSTEM INTEGRATING ULTRA-WIDEBAND RADAR AND INTERNET OF THINGS FOR COVID-19 PATIENTS	4
GRADIENTS AND INTERNAL LENGTHS IN SMALL SCALE PROBLEMS OF MECHANICS	4
PREFACE: ASSESSMENT OF DAMAGE PROGRESSION MODELS FOR SiC/SiC CERAMIC MATRIX COMPOSITES	3
DESIGN OPTIMIZATION OF PEEK HYBRID COMPOSITE CERVICAL CAGE	3
EFFECT OF CARBON FIBER REINFORCED-POLYETHERETHERKETONE (CFR-PEEK) COMPOSITE ROD FOR PEDICLE SCREW-ROD SEMI-RIGID FIXATION: A FINITE ELEMENT STUDY	3
COMPLETE AND SEMI-COMPLETE EXPLICIT ALGORITHMS OF A UNIFIED CRITICAL STATE MODEL FOR OVER-CONSOLIDATED SOILS	3
AN EARLY RETINAL DISEASE DIAGNOSIS SYSTEM USING OCT IMAGES VIA CNN-BASED STACKING ENSEMBLE LEARNING	3
NUMERICAL INVESTIGATION OF SISKO NANOFLUID OVER A NONLINEAR STRETCHING SHEET WITH CONVECTIVE BOUNDARY CONDITIONS	3
TOWARDS A POROELASTODYNAMICS FRAMEWORK FOR INDUCED EARTHQUAKES: EFFECT OF PORE PRESSURE ON FAULT SLIP	3
NUMERICAL INVESTIGATION OF THE FAILURE MECHANISM AND COUNTERMEASURES OF THE ROADWAY SURROUNDING ROCKMASS WITHIN DEEP SOFT ROCK	3
TOPOLOGY OPTIMIZATION OF ADDITIVE MANUFACTURING COMPONENTS WITH LATTICE STRUCTURES FOR MULTIPHYSICS APPLICATIONS	2
MULTISCALE MODELING OF HYDROGEN-AFFECTED CRACK TIP DAMAGE USING FULLY COUPLED CHEMO-MECHANICAL CRYSTAL PLASTICITY FRAMEWORK FOR AUSTENITIC STAINLESS STEEL	2
MULTIBAND FLEXIBLE ULTRA-WIDEBAND ANTENNA FOR WEARABLE ELECTRONICS AND BIOMEDICAL APPLICATIONS	2
FRAMEWORK FOR HEALTH MANAGEMENT AND RECORDING FOR SAILORS USING THE INTERNET OF THINGS (IOT) IN UNDERWATER COMMUNICATION	2
ANALYSIS OF TIBIA-FIBULA BONE FRACTURE USING DEEP LEARNING TECHNIQUE FROM X-RAY IMAGES	2
EQUIVARIANT GEOMETRIC LEARNING FOR DIGITAL ROCK PHYSICS: ESTIMATING FORMATION FACTOR AND EFFECTIVE PERMEABILITY TENSORS FROM MORSE GRAPH	2
DESIGNING OF DIFFERENT TYPES OF GYROID SCAFFOLD ARCHITECTURE TO ACHIEVE PATIENT-SPECIFIC OSSEOINTEGRATION FRIENDLY MECHANICAL ENVIRONMENT	2
MESOSCALE FRACTURE MODELING OF FOUR-PHASE CONCRETE USING A DEM-ENHANCED STRUCTURE GENERATION METHOD	2
ASSESSMENT OF A MICROMECHANICS-BASED PROGRESSIVE DAMAGE AND CREEP MODEL APPLIED TO CERAMIC MATRIX COMPOSITES WITH HOLES	2
PROGRESSIVE DAMAGE ANALYSIS OF STEEL-REINFORCED CONCRETE BEAMS USING HIGHER-ORDER 1D FINITE ELEMENTS	1
DATA-PHYSICS DRIVEN REDUCED ORDER HOMOGENIZATION FOR CONTINUUM DAMAGE MECHANICS AT MULTIPLE SCALES	1
EFFECTIVE DISPLACMENTS OF PERIDYNAMIC HETEROGENEOUS BAR LOADED BY BODY FORCE WITH COMPACT SUPPORT	1
A CDM-BASED BINARY MODEL FOR THE PROGRESSIVE DAMAGE PREDICTION OF SiC/SiC CERAMIC MATRIX COMPOSITES UNDER TENSION LOADING	1
EVALUATION AND ANALYSIS OF STRAIN IN THE SCREW HEAD FOR LUMBAR PEDICLE SCREW FIXATION: AN EXPERIMENTAL AND FINITE ELEMENT STUDY	1
PREFACE: ASSESSMENT OF DAMAGE PROGRESSION MODELS FOR SiC/SiC CERAMIC MATRIX COMPOSITES	1
MULTISCALE HYDRODYNAMICS IN INCLINED FIXED PAD THRUST SLIDER BEARING WITH INHOMOGENEOUS SURFACES	1
A PSEUDO-NONLOCAL FINITE ELEMENT FOR EFFICIENT SOLUTION OF COMPUTATIONALLY DEMANDING MATERIAL MODELS	1
SYNERGISTIC MULTISCALE SIMULATION OF FAST FRACTURE OF A CERAMIC MATRIX COMPOSITE TENSION BAR	1
DEFECT SENSITIVITY OF DUAL-PHASE STEELS: A STATISTICAL MICROMECHANICAL INVESTIGATION OF THE DUCTILITY LOSS DUE TO PREEXISTING DEFECTS	1
CALIBRATION METHOD OF MICROSCOPIC PARAMETERS FOR SIMILAR MATERIAL OF SURROUNDING ROCK BASED ON DEM	1
COMPUTATIONAL FRAMEWORK FOR HUMAN DETECTION THROUGH IMPROVED ULTRA-WIDE BAND RADAR SYSTEM	1
CORTICAL OSTEON STIFFNESS: A COMPARATIVE MICROMECHANICS-BASED HOMOGENIZATION STUDY	1
A UNIFIED APPROACH TO COMPUTATIONAL MODELING OF CERAMIC MATRIX COMPOSITES UNDER HIGH-TEMPERATURE CREEP, FATIGUE, AND INITIAL QUASI-STATIC LOADING	1
MICROSCOPIC MECHANISMS OF PARTICLE SIZE EFFECT ON 2D ARCHING EFFECT DEVELOPMENT AND DEGRADATION IN GRANULAR MATERIALS	1
INTEGRATED COMPUTATIONAL MATERIAL SCIENCE ENGINEERING LIFING MODEL OF CMC COUPONS USING NANO-MICROMECHANICS BASED MULTISCALE PROGRESSIVE FAILURE ANALYSIS	1
NUMERICAL ANALYSIS OF SUFFUSION BEHAVIOR UNDER CYCLIC LOADINGWITH COUPLED CFD-DEM SIMULATION	1
AN END-END DEEP LEARNING FRAMEWORK FOR LUNG INFECTION RECOGNITION USING ATTENTION-BASED FEATURES AND CROSS AVERAGE POOLING	1
Further development of GDEM for the modelling of multi-scale dynamic response of rock subjected to blasting and impact	1
VARIATIONALLY DERIVED DISCONTINUOUS GALERKIN METHOD: APPLICATION TO DYNAMIC THERMOELASTICITY	1
ASSESSING SHEAR STRENGTH OF SILICA-NASH GEOPOLYMER COMPOSITE USING MOLECULAR DYNAMIC SIMULATION	1
Effects of cyclic traffic loads and seawater erosion on suffusion of crushed calcareous sands	1
HOMOGENIZATION-BASED SPACE-TIME TOPOLOGY OPTIMIZATION OF TUNABLE MICROSTRUCTURES	0
UNDERWATER CHANNEL RECOVERY SCHEME IN DELAY-DOPPLER DOMAIN USING MODIFIED BASIC PURSUIT DENOISING WITH PRIOR KNOWLEDGE	0
	0
VERIFICATION AND VALIDATION OF A RAPID DESIGN TOOL FOR THE ANALYSIS OF THE COMPOSITE Y-JOINT OF THE D8 DOUBLE-BUBBLE AIRCRAFT	0
Understanding the biomechanical response of progressive thread dental implants using multi-scale finite element analysis	0
A HYBRID SEQUENTIAL SCHEME FOR BRITTLE HYDRAULIC FRACTURES IN POROELASTIC MEDIA	0
PREFACE: MULTISCALE MECHANICAL MODELING OF "COMPLEX" MATERIALS AND ENGINEERING APPLICATIONS. DEDICATED TO THE 60TH BIRTHDAY OF PATRIZIA TROVALUSCI	0
A MICROMECHANICAL STUDY ON DP600 STEEL UNDER EXTREMELY LOW-CYCLE FATIGUE	0
Fine-tuning MobileNetV3 with different weight optimization algorithms for classification of denoised blood cell images using convolutional neural network	0

	0
PATRIZIA TROVALUSCI: AN OPEN-MINDED SCHOLAR OF MECHANICS, AN ARCHITECT, A DETERMINED WOMAN	0
	0
	0
PREFACE: REVOLUTIONIZING ENGINEERING PRACTICE BYMULTISCALE METHODS	0
	0
PREFACE	0
EVALUATION OF DISSIPATION ENERGY OF ISOTROPIC CONTINUUM DAMAGE MECHANICS MODEL WITH ADAPTIVE TIME-STEP CONTROL APPROACH	0
	0
INDEX, VOLUME 19, 2021	0
A New Criterion for the Human Knee Osteoarthritis Characterization: Finite Element modelling	0
Diagnosis of kidney cyst, tumor and stone from CT scan images using feature fusion hypergraph convolutional neural network (F2HCN2)	0
A PRACTICAL MULTISCALE RESPONSE SENSITIVITY ANALYSIS METHOD FOR REINFORCED CONCRETE STRUCTURES	0
	0
Corrosion Prediction of Mg Implant using Multiscale Modelling based on Machine Learning Algorithms	0
	0
	0
COMPUTATIONAL MODELING OF THERMAL CONDUCTIVITY OF RANDOM PARTICULATE COMPOSITES WITH CONTACT RESISTANCE	0
CROSS-SCALE MODELING OF LIQUID FLOWS IN HUMAN BODIES	0
	0
MESOSCALE MODEL FOR SPALL IN ADDITIVELY MANUFACTURED 304L STAINLESS STEEL	0
Efficient segmentation model using MRI images and deep learning Techniques for Multiple Sclerosis Classification	0
	0
Fast Fourier transform method for peridynamic bar of periodic structure	0
Multiscale mechanobiological modelling of the cortical/spongy interface using finite elements	0
ON TWINNING-MEDIATED VOID GROWTH IN HEXAGONAL CRYSTALS	0
LETTER TO THE EDITOR: DEDICATION LETTER TO PATRIZIA TROVALUSCI ON THE OCCASION OF HER 60TH BIRTHDAY	0
VISUAL MACHINE LEARNING: INSIGHT THROUGH EIGENVECTORS, CHLADNI PATTERNS, AND COMMUNITY DETECTION IN 2D PARTICULATE STRUCTURES	0
Detailed design and analysis for additive manufacturing of topologically optimised and generatively designed Ti-6Al-4V Hip Joint Implant	0
	0
3D hydro-mechanical coupling analysis of dynamic characteristics in saturated roadbed of ballastless high-speed railway	0
ADVANCES IN COMPUTATIONAL AND DATA-DRIVEN POROMECHANICS FOR SUBSURFACE APPLICATIONS	0
A Comparative Biomechanical Analysis of Posterior Lumbar Interbody Fusion Constructs with Four Established Scenarios	0
	0
AN ANISOTROPIC EXTENSION FOR A THERMOVISCOPLASTIC GTN DUCTILE DAMAGE MODEL	0
PREDICTIVE MODELING OF INORGANIC 3C-SiC FRICTION MATERIALS USING MOLECULAR DYNAMICS SIMULATION	0
PATRIZIA TROVALUSCI: AN OPEN-MINDED SCHOLAR OF MECHANICS, AN ARCHITECT, A DETERMINED WOMAN	0
A ONE-WAY COUPLED APPROACH FOR MULTISCALE CHARACTERIZATION OF FILLING OF DUAL-SCALE FIBROUS REINFORCEMENTS CONSIDERING AIR COMPRESSIBILITY AND DISSOLUTION IN LUMPED FASHION	0
HIERARCHICAL RVE-BASED MULTISCALE MODELING OF NONLINEAR HETEROGENEOUS MATERIALS USING THE FINITE VOLUME METHOD	0
Analyzing the Performance of Hip Cement Spacers: A Study on Crack Behavior	0
	0
FINE-SCALE INTERFACIAL MODELS FOR DISCRETE MULTIPHASE FLOWS WITH CONVECTING DISCONTINUITIES	0
Thermodynamics analysis of Casson hybrid nanofluid flow over a porous Riga plate with slip effect	0
PREFACE: MULTISCALE MECHANICAL MODELING OF "COMPLEX" MATERIALS AND ENGINEERING APPLICATIONS. DEDICATED TO THE 60TH BIRTHDAY OF PATRIZIA TROVALUSCI	0
STATIC STRENGTH PREDICTION OF SiC/SiC CERAMIC MATRIX COMPOSITES USING CONTINUUM DAMAGE MODELING	0
MULTISCALE SIMULATION OF HYDRODYNAMIC STEP BEARING WITH ULTRA-LOW CLEARANCE INVOLVING SURFACE ROUGHNESS	0
Intramedullary Nail or Locking Compression Plate For Fixing a Fractured Distal Tibia: Finite Element Analysis Along With an Adaptation Model	0
Computational Biomedical Framework Using IoT and MR for Detecting, Tracking and Preventing Asymptomatic COVID-19 Patients	0
ADAPTIVE PHASE-FIELD CONCURRENT MULTISCALE METHOD FOR EFFICIENT SIMULATION OF QUASI-BRITTLE FRACTURE	0
	0
	0
PREFACE	0
Computational Framework for Prediction of Cardiac Disorders by analyzing ECG signals Using Machine Learning Technique	0
	0
	0
NUMERICAL INVESTIGATION OF GRANITE FAILURE MECHANISM BASED ON FINITE-ELEMENT VORONOI GRAIN-BASED MODEL	0
LETTER TO THE EDITOR: DEDICATION LETTER TO PATRIZIA TROVALUSCI ON THE OCCASION OF HER 60TH BIRTHDAY	0
INDEX, VOLUME 20, 2022	0
DEVELOPMENT OF COARSE-GRAINED MODELS OF LIQUID WATER BY DEEP NEURAL NETWORKS FOR SIMULATING ACOUSTIC VIBRATIONS OF NANOSTRUCTURES IN AQUEOUS ENVIRONMENT	0
PREFACE: MULTISCALE AND MULTIPHYSICS COMPUTATIONAL MODELING IN GEOMECHANICS	0
ANALYTICAL MODEL FOR COMPOSITE TRANSVERSE STRENGTH BASED ON COMPUTATIONAL MICROMECHANICS	0
PREFACE: REVOLUTIONIZING ENGINEERING PRACTICE BYMULTISCALE METHODS	0
A TECHNICAL OVERVIEW OF ALTAIR MULTISCALE DESIGNER	0
Peridynamics simulation and influence law analysis considering rock microscopic properties	0
AN ASYMPTOTIC ELECTROSTATIC MODEL OF AN ARRAY OF MICROMIRRORS	0
Assessment of mechanical responses between trabecular bones and porous scaffolds under static loading and fluid flow conditions: A finite element approach	0
BLIND PREDICTIONS OF CERAMIC MATRIX COMPOSITE TEST SPECIMEN RESPONSE USING A COMBINED PROGRESSIVE DAMAGE AND OXIDATION KINETICS MODEL	0
INDEX, VOLUME 21, 2023	0
Multiscale 3D TransUNet-aided Tumor Segmentation and Multi-Cascaded Model for Lung Cancer Diagnosis System from 3D CT Images with Fused Feature Pool Formation	0
	0
APPLICATION OF SKELETAL BIOMECHANICS TO STRUCTURAL SYSTEMS	0
	0
CONSISTENT CONTINUOUS DEFECT THEORY	0
SIMULATION OF CMC MECHANICAL RESPONSE UNDER MONOTONIC, CREEP, AND FATIGUE LOADING	0