Mechanics of Advanced Materials and Structures

Article	Citations
Penetration mechanism of open-ended pipe piles under jacking and driving methods	157
Layer-wise optimization of elliptical laminates with curvilinear fibers	72
TLS and FEM combined methods for deformation analysis of tunnel structures	67
Aeroelastic tailoring of composite rudder skin considering variable angle tow laminates by a hybrid backtracking search-JAYA-Sine Cosine Algorithm	67
Building response analyses recorded by force-balanced and micro-electro mechanical system accelerometers	67
Introducing hybrid deep neural networks to predict the transient vibrations of the sandwich systems reinforced by multi-phase nanocomposites	61
Numerical modeling of DNA nucleotides binding process mechanics considering oscillations	61
Crashworthiness analysis of circumferential sinusoidal hierarchical tubes (CSHTs): Experiment, simulation and theoretical prediction	59
Enhancing stretch ratio on cross-section of wavy circuit in stretchable devices	55
Numerical study of large deflection of nanobeam according to the MCST and SE	54
Flexnertia: A novel dissipation mechanism for structural vibration reduction through coupling of flexural motion with an inerter	53
Investigation of bi-directional re-entrant anti-tetrachiral structure for regulating negative Poisson’s ratio	53
Theoretical modeling and dynamic analysis of designable grillages for repairing material surface defect	52
Improving the efficiency and stability of perovskite solar cell: Application of innovative machine learning algorithm	52
Adaptive multimodal surface patterning on a cylindrical shell panel using piezoelectric actuators	47
Highly interchangeable cross-knob unit reconfigurable elastic metasurface for manipulating flexural waves function	44
Analytical modeling of panel flutter and active control in supersonic variable stiffness composite laminates	44
Aerodynamic stability analysis of the concrete ceiling reinforced with advanced functionally graded nano-materials: A sustainable approach for construction materials	42
Nonlinear inelastic analysis of space semi-rigid steel frames subjected to static load using plastic-zone method	42
Geometrically nonlinear wind-induced vibration piezoelectric energy harvester based on vortex-induced vibration	40
Sustainable timber building and its carbon emission analysis in the LINE-NEOM	40
Unraveling thermoelastic performance of the multi-directional functionally graded composite structure by data-driven deep-learning approach	40
Mechanical characterization of alternating slit, I-shaped and rotating triangle based auxetic skin graft phantoms	40
Design and study of the crashworthiness of two-way gradient topology star-shaped honeycombs	39
Critical investigation on the effect of fiber geometry and orientation on the effective mechanical properties of fiber-reinforced polymer composites	39

Constitutive model calibration of high-strength steel in tensile mode using a compression-to-tension stress-converting specimen structure in split Hopkinson pressure bar tests	38
Thermoelastic damping analysis of functionally graded sandwich microbeam resonators incorporating nonlocal and surface effects	38
Comparison of quasi-static compression performance of FDM 3D printed truss supported double arrowhead structure with a circular node	38
Features of functional behavior of TiNi shape memory alloy after uniaxial high speed magnetic pulse tension	38
A study on anisotropic behavior of functionally graded plates by higher order refined theory	38
On the thermal conductivity of the α2-graphyne nanotubes: A molecular dynamics investigation	37
Investigating resonance frequency in advanced composite structures as the main part of bridge construction: a multi-physics simulation approach	36
Calibration of nonlocal generalized helical beam model for free vibration analysis of coiled carbon nanotubes via molecular dynamics simulations	36
Study on characterization of moderate energy impact response of elastic-plastic plate structure	35
Review of fracture characterization by delamination and debonding of polymer composite materials and bonded interfaces subjected to high temperature	35
Influence of poling angle on a mode-III non-centric semi-permeable crack in the piezoelectric strip under linearly varying load over developed zones	34
Study on the low-velocity impact response and mechanism of polyaspartic ester polyurea coated aluminum plate	34
A novel in-plane isotropic fibrous structure for laminated composite applications: Mathematical and numerical modeling	34
Energy absorption properties of multi-panel reinforced tubular structure under quasi-static compression loading	33
Comparative analysis of mechanical properties and energy absorption capabilities of functionally graded and non-graded thermoplastic sheet gyroid structures	32
Flexural wave characteristics in piezoelectric semiconductor beams	31
Dynamic interaction between complex defect and crack in functionally graded magnetic-electro-elastic bi-materials	31
Three-scale modeling and probabilistic progressive damage analysis of woven composite laminates	30
Sound transmission properties of a porous meta-material with periodically embedded Helmholtz resonators	30
Dynamic stability analysis of CFRP sandwich structure reinforced by advanced nanocomposites via both machine learning method and mathematical simulation	30
Experimental and numerical investigation of sheet metal failure based on Johnson-Cook model and Erichsen test over a wide range of temperatures	29
A material-structure coupled design method to study the impact response of CFRP apron board for railway vehicle	29
Noncontact magnetically coupled piezo-electromagnetic rotary energy harvester	29
Free vibration of pseudoelastic NiTi wire: finite element modeling and numerical design	29
Oscillatory characteristics and propulsive performance of a tuna-like caudal fin driven by macro fiber composites	29
Effect of mechanical properties and geometric dimensions on electromechanical impedance signatures for adhesive joint integrity monitoring	28
Dynamic characteristics of composite drive shaft in complex environment based on Carrera unified formulation	28
A deep learning approach based on a data-driven tool for classification and prediction of thermoelastic wave’s band structures for phononic crystals	28
Nonlinear electro-thermo-mechanical dynamic behavior of complexly curved GPL-reinforced panels with auxetic core	28
Perforated auxetic honeycomb booster with reentrant chirality: A new design for high-efficiency piezoelectric energy harvesting	28
Optimizing mechanical behavior of middle ear prosthesis using finite element method with material degradation FGM in three functions	28
Development of artificial intelligence based model for the prediction of Young’s modulus of polymer/carbon-nanotubes composites	28
Design and mechanical performances of stress adaptive porous structures based on triply period minimal surface	28
A multimodal L-shaped piezoelectric energy harvester with bistability and internal resonance	28
On the transient vibrations of the advanced composite systems under mechanical loading	27
Evaluating fatigue performance of Bailey asphalt mixtures containing natural river sand at varied strain and air void levels	27
Results of magnetometry of spheres’ chains as basic structural elements of a granulated material	27
Lightning ablation damage and residual bending performances of scarf-repaired composite laminates with copper mesh protection	27
A reciprocal relation with application in the study of the dislocations	27
The optimal design of honeycomb sandwich panel based on the coupled-effects of geometric parameters	27
Rate sensitive plasticity-based damage model for concrete under dynamic loading	27
Theoretical formulism analyzing damping nature of the ferromagnetic shape memory alloy	27
Non-polynomial zig-zag unified shear deformation formulation solved via boundary discontinuous method for laminated sandwich plates	27
Double-panel metamaterial with multi-resonator for broadband sound insulation	27
The problem of axisymmetric torsion of a rigid disk parallel to an internally penny crack and interface in a bilayer medium	27
Modeling of visco-hyperelastic materials based on the rate equi-biaxial tensile data extracted from a novel biaxial tensile testing machine	27
Simulation and experimental validation of shear deformation and strength of textile-reinforced composites	27
Thermoelastic stability of CNT patterned conical shells under thermal loading in the framework of shear deformation theory	27
Collaborative optimization of composite structure and fiber orientation through real-time correction of deep neural network (DNN) models with elite samples	26
Influence of in-plane preload on the impact behavior of composite sandwich panels	26

The static and dynamic regimes of the bistable asymmetric cross-ply composite laminated plates	26
Projectile impact response of Glass/Epoxy and Kevlar/Epoxy laminates of same thickness: A comparative and parametric study on curved laminates	26
Nonlinear Finite Element analysis of concrete corbels with hybrid reinforcements	25
Impact-resistance mechanism of gradient ceramic/high entropy alloy composite structure	25
The dynamic performance of semi-infinite piezoelectric strip containing irregular boundaries based on the boundary element method	25
Quasi-static crushing response of additive manufactured 3D reentrant circular auxetics with different polymer matrices	25
Crashworthiness of double-gradient hierarchical hexagonal tubes under multiple loads	24
Electro-mechanical multi-branch channel driven by higher-order topological rainbow	24
Structural system reliability analysis based on multi-modal optimization and saddlepoint approximation	24
Using a non-linear mixed model behavior of CZM to predict the damage in single lap bonded joint with Bi-composite graded materials	24
Unconfined compressive strength of geopolymers based soil: Model development using gene expression programming and a comparison with other computer-based approaches	24
Exact forming for additive manufacturing using an irregular element-based compensating approach: Simulation, experiment, and detection	24
Periodic WIB-trench wave barriers for seismic surface waves	24
Study of the defect-crack offset distance on the impact fracture behavior of plexiglass	24
Large deflection analysis of FGM/magneto-electro-elastic smart shells with porosities under multi-physics loading	23
Effects of the material properties of the microstructured gap on the electromechanical behavior of a capacitive micro-devices	23
Low-velocity impact behavior of interlayer hybrid foldcore sandwich structures with carbon/glass fibers	23
Combining coupled, staggered and uncoupled solution methods for phase-field-based fracture analysis	23
Effects of multiple reflected P waves on crack-tip stress and crack propagation in directional fracturing blasting	23
An enhanced higher-order finite element formulation for wrinkling analysis of thick sandwich plates	23
A rate-dependent cohesive zone model for simulating fast crack evolution and growth	23
Research on anti-impact performance of arc-shaped thin-wall folding energy-absorption device	23
Analysis of multi-layers insulated sandwich panel with flexible shear connectors	23
A novel auxetic metamaterial based on SSH with unique enhanced load-bearing capacity and NPR effect	23
Dynamics characteristics of variable stiffness curvilinear fiber-reinforced layered composite beam under moving load by sinusoidal shear flexible beam model including nonlinear and thermal effects	22
Parametric design and performance evaluation of gyroid triply periodic minimal surface preparation by LCD photopolymerization	22
A novel solution to thermo-elasto-dynamic response for inhomogeneous orthotropic hollow cylinders	22
Cosserat shape effects in the bending of foams	22
A novel EFG meshless-ANN approach for static analysis of FGM plates based on the higher-order theory	22
Study of lattice structure anisotropy by crystal elasticity and plasticity FE simulations	22
A novel hybrid lattice structure for improving compression mechanical properties	22
Multiscale finite element analysis model of needle-punched carbon/carbon composites	22
Examining the critical speed and electro-mechanical vibration response of a spinning smart single-walled nanotube via nonlocal strain gradient theory	22
Forced vibration analysis of sandwich beam reinforced with graphene in piezoelectric medium on elastic substrate	22
Study on progressive collapse resistance and mechanisms of beam-column sub-assemblages	22
Nonlocal thermoelastic analysis of a spherically symmetric elastic sphere with memory effects	21
Bending failure mechanisms and free vibration properties of three-dimensional irregular and integrally manufactured composite sandwich structures	21
Static analysis of functionally graded shells of double curvature using trigonometric shear and normal deformation theory	21
Negative Poisson’s ratio lattice for designing vertebral biomaterials	21
Hypervelocity impact on honeycomb structure reinforced with bi-layer ceramic/aluminum facesheets used for spacecraft shielding	21
Mechanical characterization of a metamaterial with negative Poisson’s ratio under compressive loading: Experimental along with FEM	21
Nonlocal free vibration of magneto-electro-elastic nanoplates with imperfect contacts	21
Performance response and application of vertical-inclined alternating composite steel pipe pile	21
Nonlinear dynamic responses of bistable cantilever shell subjected to in-plane foundation excitation	21
Vibration characteristics and power flow analysis of irregular composite coupling laminated plate structures	21
Dr. Reddy is selected to receive the IACM congress medal from International Association of Computational Mechanics (IACM)	21
Flexural analysis of 3D-printed sandwich beams with chiral cores using deep neural networks and response surface methodology	21
A study of the association involving pore characteristics and compressive strength of cement pastes incorporating fine fly ash	21
Process modeling and characterization of thermoset composites for residual stress prediction	21
Thermal-mechanical-electrical coupling isogeometric analysis for piezoelectric material structures	21
Carrera unified formulation for bending and free vibration analysis of sandwich plate with FG-CNT faces considering the both soft and stiff cores	21
Flexural behavior of sandwich structures with a hybrid carbon nanotube/short carbon fiber foam core and debonded skin/core interface	21
Elastostatic problems of crack lying along the interface of an elliptical inclusion embedded in elastic media	21
Dynamic stability of hybrid fiber/nanocomposite-reinforced toroidal shells subjected to the periodic axial and pressure loadings	20
Unified three-dimensional finite elements for large strain analysis of compressible and nearly incompressible solids	20
A surrogate model for real-time dynamic simulation of dielectric elastomer actuators via long short-term memory networks	20
Bending behavior of triply periodic minimal surface foam-filled tubes	20
Extended finite element method simulation and experimental test on failure behavior of defects under uniaxial compression	20
Advancements in optimizing mechanical performance of 3d printed polymer matrix composites via microstructural refinement and processing enhancements: A comprehensive review	20
Research on the energy absorption performance of lattice filling structures based on homogenization analysis technique	20
Structural dynamic properties of stiffened composite plates with embedded multi-layered viscoelastic damping membranes	20
Static analysis of foldable pressurized and thermally loaded cylindrical shell as an expander in sport equipment reinforced by G-Ori nanofillers	20
Optimization of elastoplastic behavior of contact interface for improved contact stress distribution	20
Thermally vibrational analyses of functionally graded graphene nanoplatelets reinforced funnel shells with different complex shapes surrounded by elastic foundation	20
An investigation into size-dependent dynamic mechanical-diffusion responses of multi-layered laminated sandwich-like nanocomposites under shock loadings of molar concentration for vibration control ba	20
Development of an anisotropic co-rotational beam model including variable cross-section	20
Vibration control and band gap tuning of finite periodic structure composed by active functionally graded metamaterial bars	20
Free and forced vibration analysis of laminated composite beams with through-the-width delamination by considering the in-plane and out-of-plane deformations	20
Electro-elastic results of graphene origami-reinforced sandwich doubly curved shells	20
Implicit non-ordinary state-based peridynamics model for linear piezoelectricity	19
Experimental and numerical investigation of shear strain and failure in sandwich panels with foam-core and jute/glass composite faces under 3-point bending	19
A study on the vibration characteristics of functionally graded cylindrical beam in a thermal environment using the Carrera unified formulation	19
Analytical solutions for the free vibration of cross-ply composite laminated plates with arbitrary biaxial symmetric geometry	19
Dynamic response of H-FGS plates integrated with Pasternak foundation subjected to harmonic loading in the thermal environment using Chebyshev-FEM	19
Thermo-flexible coupled dynamics of composite laminated plates based on absolute nodal coordinate formulation	19
Investigation on the mechanical coordination mechanisms of the multilayer gradient structures in wheat straw by SR-CT technology	19
Effect of truss core on sound radiation behavior of sandwich plate structures under structure borne excitation	19
Finite element analysis of energy absorption characteristics for biomimetic thin-walled multi-cellular structure inspired by horsetails	19
Theoretical study on multi-physics coupling problems of functionally-graded lead-free piezoelectric rectangular thin plates	19
Prediction method for re-damage behavior of the repaired CFRP bolted joint	19

Multi-objective topology optimization of periodic pile barriers with ambient body waves isolation performance	19
Study on energy absorption characteristics of hybrid thin-walled tubes reinforced with carbon fibers and glass fibers	19
Plastic behavior of metal sandwich beams with foam-filled sinusoidal corrugation	19
Analyzing the structural and thermal behavior of beam sections filled with steel fiber-reinforced concrete in light-gauge steel	18
Metalite, a new class of composite laminates with unique properties	18
Magnetic and rotational effects on the reflection of inhomogeneous waves in a fiber-reinforced thermoelastic material	18
Application of intelligent controller to speed up vibration attenuation of a sandwich smart structure subjected to external excitation	18
Experimental and finite element modeling of concrete-filled basalt fiber reinforced polymer–polyvinyl chloride tube cylinders under axial compression	18
Cracked layers on flexible foundation under Low-Velocity moving Patch-Loads	18
Safety evaluation of deformed coke drum with nested stress at cold spot	18
Scattering of SH guided wave by a circular cavity and a semicircular salient in an infinite piezoelectric strip	18
Coupled field modelling of thermomechanical response in materials using peridynamic heat transport model and non-ordinary state-based peridynamics	18
A novel analytical technique based on singular integral operators to study EMPS model with two unequal collinear cracks in magneto-electro-elastic solids	18
Electromechanical coupling analysis of three-dimensional braided piezoelectric composites energy harvester	18
Parabolic tapering piezoelectric rotational energy harvester: Numerical analysis with experimental validation	18
Vibration suppression of the blisk based on intentional mistuning of piezoelectric shunt damping patches	18
Nano-scale modeling of energy dissipation in a single lamella reveals the significant contribution of collagen-mineral sliding to intrinsic bone toughness	18
Sparrow search algorithm enhanced multi-output regression for predicting rock fracture shear displacements: A metaheuristic-hybridized model	18
Analytical stress analysis of the furan epoxy composite coatings subjected to tensile test	18
Numerical investigation on dynamic damage behavior of a novel N-shaped perforated armor plate under ballistic impact	18
A theoretical approach for thermomechanical shock analysis of doubly curved panel with respect to geometrical and physical parameters using machine-leaning-based algorithm	18
Application of the Carrera unified formulation and machine learning for vibration analysis of composite structures as the main part of construction robotics	18
Electro-magneto-mechanical critical load analysis of piezoelectric/piezomagnetic sport force plates used for testing athlete performance	18
Auxetic behavior obtained through the large deformations of variants of the rectangular grid	18
Computational homogenization of linear viscoelastic multi-phase composites: Effective relaxation estimation in perovskite-based solar panels	18
The use of contravariant tensor invariants to model damage in anisotropic soft tissues	17
Data-driven solution for nonlinear wave dispersion of sandwich nanoshell with piezoelectric patch layers	17
Effects of un-parallel notches on the granite fracture properties and acoustic emission phenomena under biaxial test: PFC computation and experimental verification	17
Free vibration of sandwich beams with graphene nanoplatelets reinforced piezoelectric face sheets	17
Experimental and molecular dynamics simulation investigation on filler reinforcement for property enhancement of PU composites	17
Design and crashworthiness behaviors of novel 3D printed cutting-type energy-absorbing composite structures	17
The single or combined treatment effect of jute surface modification on mechanical and thermomechanical properties of jute/PLA laminated composites	17
Topological design and magnetic tunability of a novel cross‐like holes phononic crystal with low frequency	17
A model for tensile modulus of halloysite-nanotube-based samples assuming the distribution and networking of both nanoparticles and interphase zone after mechanical percolation	17
Reflection and transmission phenomena of SH waves in fluid saturated porous medium with corrugated interface	17
Thermo-elastic buckling behaviors of sandwich structure with concrete core interconnected by Kerr-type three-parameter elastic layer: Carrera unified formulation approach validated by a machine learni	17
Study on damage initiation mechanism of rubber/cord composites and the structure optimization	17
Thermo-elastic response of 2D-FGRPs with temperature-dependent material properties by means of the theory of elasticity	17
Thermal vibration analysis of a composite sandwich plate in the space environment	17
Mathematical modeling the rigid-plastic yielding behavior of fibrous flatly-reinforced composites of anisotropic materials at 2D stress state	17
RETRACTED ARTICLE: Computational aspects of viscoelastic growth mechanics of skin in plastic surgery	17
Computational performance evaluation of sacrificial protective walls composed of lightweight concrete blocks: a parametric study of blast loads in a tunnel	17
Nonlinear free vibration analysis of laminated composite plates and shell panels using non-polynomial higher-order shear deformation theory	16
SMP-based anisotropic chiral metamaterials with tunable mechanical properties and band gap characteristics	16
Predicting ultimate strength and axial strain of circular concrete columns having AFRP wraps and tube-encased confinement	16
Asymptotically correct isoenergetic formulation of geometrically nonlinear anisotropic plates	16
Comparison and identification of efficient nanoparticles to improve the impact resistance of glass/epoxy laminates: Experimental and numerical approaches	16
Low-frequency vibrations of a thin-walled functionally graded cylinder (plane strain problem)	16
Blasting damage control of slit charge structure	16
Efficiency of shear connectors under combined shear and torsion	16
Supervised machine learning models for accurate prediction of CBGA solder joint lifespan	16
Parametric design and energy absorption of non-uniform classic honeycombs mapped by topology optimization	16
A novel trigonometric shear deformation theory for the buckling and free vibration analysis of functionally graded plates	16
A comparison of the biomechanical responses of lumbar interbody fusion cage combined with posterior fixation systems made of rigid versus semi-rigid materials	16
Study on seismic performance of RC columns strengthened with CFRP-steel tube self-compacting concrete	16
New method for the mechanical characteristics of self-weight collapsibility testing of loess foundation based on centrifugal model test	16
Molecular dynamics investigation of the elastic, mechanical, and anisotropic features of hexagonal (2H) diamond under extreme temperatures	16
Dynamic principle analysis of reinforced concrete replaceable coupling beam energy dissipation structure	16
Integration of 3-D 4-directional braided composites into dynamic modeling of plates with large overall motions	16
Model test study on the mechanical characteristics of shallowly buried covered excavation PBA station construction	16
Impact response of a viscoelastic plate made of a material with negative Poisson’s ratio1	16
Low frequency limits for Lamb waves in homogeneous, stratified and functionally graded anisotropic plates	16
Postbuckling behavior of two-dimensional decagonal quasicrystal plates under biaxial compression	15
Buckling analysis and structural optimization of multiple-material omega stiffened composite panel	15
Experimental identification of the fractional parameter of the fractional derivative standard linear solid model for fiber-reinforced rubber concrete	15
Eigenfrequency optimization of variable stiffness manufacturable laminates using spectral Chebyshev approach and lamination parameters	15
Numerical study on off-axis tensile behavior of 3D braided composites at elevated temperature	15
Understanding and mitigating delamination in composite materials: A comprehensive review	15
Crashworthiness of bionic tree-shaped hexagonal hierarchical gradient structures under oblique crushing conditions	15
Size-dependent analysis of surface wave in irregular fractured porous seabed subjected to fractional-order derivative	15
Sound insulation performance of cylindrical sandwich structure improved by membrane-type metamaterials	15
Failure analysis and optimization design of CFRP automotive seat back under multiple conditions	15
Free vibration analysis of sandwich shells with cutouts: An experimental and numerical study with artificial neural network modelling	15
Characterization of elastic modulus at glass/fiber interphase using single fiber composite tensile tests and utilizing DIC and FEM	15
A homogenized finite element analysis of the deformation of multicellular thin-walled epoxy/coir fiber-reinforced aluminum 6063 composite tubes	15
On crashworthiness and energy-absorbing mechanisms of hygrothermal-aged CFRP structures subjected to quasi-static loads	15
The in-plane tensile and shear properties of novel chiral cellular structures	15
Experimental and theoretical studies on the shear resistance of reinforced engineered cementitious composite beams with GFRP rebars and natural fibers	15
New approach for modeling randomly distributed CNT reinforced polymer nanocomposite with van der Waals interactions	15
Bi-Helmholtz kernel based stress-driven nonlocal integral model with discontinuity for size-dependent fracture analysis of edge-cracked nanobeam	15
A method for regulating negative Poisson's ratio by a reentrant anti-tetrachiral structure	15
Mechanical behavior of dumbbell-type metamaterials constructed with elliptic curves	14
Influence of actuation sequence on the snap-through process of composite multi-stable structures	14
Influence of open joints on blasting damage and crack propagation of PMMA	14
Effect of azobenzene composition ratio on the degree of photosoftening: Experimental and molecular dynamics simulation studies	14
Vibration control and structural optimization of steering brake assist device in new energy buses	14
Design of non-homogeneous three-dimensional ceramic lattice structures with interpenetrating epoxy resin for enhanced energy absorption and load-bearing performance	14
Poisson’s ratio of two-dimensional hexagonal materials under finite strains	14
Analytical modeling of sound transmission through FGM sandwich cylindrical shell immersed in convected fluids	14
An iterative algorithm for studying forced vibrations of a nanotube conveying fluid	14
Analytical verification of FFT-based micromechanical simulations near an elliptical crack tip by using composite voxels	14
Warping included mixed finite elements for bending and stresses of functionally graded exact curved beams	14
Nonlinear behavior of FG porous cylindrical sandwich shells reinforced by spiral stiffeners under torsional load including thermal effect	14
Investigation on the creep models of the NEPE solid propellant	14
Microstructure-elastoplastic property relationship for 3D printed short fiber-reinforced polymeric composites: A numerical study	14