OOIR: Observatory of International Research

Papers

(The median citation count of Journal of Vibration and Acoustics-Transactions of the Asme is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-03-01 to 2025-03-01.)

Article	Citations
Control of Vibratory MEMS Gyroscope With the Drive Mode Excited Through Parametric Resonance	46
An Engineering Approach for Estimating the Radiation Efficiency of Orthogonally Stiffened Plates	28
The Influence of an Impedance Obstacle on the Acoustic Field Inside a Rectangular Room	23
Resonance Attenuation in Fluid Transmission Through Channels Without the Use of Accumulator Systems	22
A Model for Sound Propagation Through Corrugated Porous Structures With Mean Flow	19
Vibratory Conveying by Harmonic Longitudinal and Polyharmonic Normal Vibrations of Inclined Conveying Track	19
Breaking the Reciprocity in Acoustic Metamaterials by Active Eigen-Structure Control Strategy	18
Active Vibration Control of a Multi-Degree-of-Freedom System via Twin Rotor Damper	16
A Multiple-Burner Approach to Passive Control of Multiple Longitudinal Acoustic Instabilities in Combustors	16
Intentional Blade Mistuning to Emulate the Dynamic Influence of Split Ring Damper	15
Free Vibration Analysis of Thin-Walled Beams Using Two-Phase Local–Nonlocal Constitutive Model	13
Pattern Optimization to Minimize Dynamic Impacts of Wrapping Cables in Plate-like Space Structures: Experimental Validation	12
Lyapunov–Perron Transformation for Quasi-Periodic Systems and Its Applications	12
Rapid Computation of Resonant Frequencies for Nonproportionally Damped Systems Using Dual Oscillators	11
Tetrascatt Model: Born Approximation for the Estimation of Acoustic Dispersion of Fluid-Like Objects of Arbitrary Geometries	11
Reviewer's Recognition	11
Finite Cross-Section Method for Mode Shape Recognition of Highly Coupled Beam-Type Structures	11
Material Extrusion on an Ultrasonic Air Bed for 3D Printing	10
An Analytical Model of a Rotating Radial Cantilever Beam Considering the Coupling Between Bending, Stretching, and Torsion	10
A Robust Delayed Resonator Construction Using Amplifying Mechanism	10
Instability and Parametric Amplification of a Piezoelectric Energy Harvester Periodically Plucked by a Rotating Magnet	10
Optimization of Band Gaps in Rotors With Longitudinal Periodicity and Quasi-Periodicity	9
Primary Resonance in a Weakly Forced Oscillator With Both Parametric Damping and Stiffness	9
Design and Application of Double-Parallelograms-Based Tuned Mass Damper for Low-Frequency Vibration Absorption	9
Locally Resonant Effective Phononic Crystals for Subwavelength Vibration Control of Torsional Cylindrical Waves	9

Acoustic Wave Focusing From Reconfigurable Acoustic Arrays Based on a Bricard-Miura Synthesis	8
Parametric Analysis of the Nonlinear Dynamics of a Cracked Cantilever Beam	8
Elastic Metasurfaces for Full Wavefront Control and Low-Frequency Energy Harvesting	8
A New Moving Kirchhoff–Love Plate Element for Dynamic Analysis of Vehicle–Pavement Interaction	8
Bone Conduction: A Linear Viscoelastic Mixed Lumped-Continuum Model for the Human Skin in the Acoustic Frequency Range	8
Experimental Investigation on the Chaos-to-Interwell Motion Transfer in a Bistable Beam-Slider Vibration Energy Harvester	7
Aerodynamic Noise Generated in Three-Dimensional Lock-In and Galloping Behavior of Square Cylinder in High Reynolds Number Turbulent Flows	7
Rapid Investigation of Blisk Mistuning Via Piezoelectric-Induced Stiffness Perturbations	7
Unique Loss Factor Images for Complex Dynamic Systems	7
Responses of a Strongly Forced Mathieu Equation—Part 1: Cyclic Loading	7
A Proof-of-Concept Study on an Internal-Resonance-Based Piezoelectric Energy Harvester With Coupled Three-Dimensional Bending-Torsion Motions	6
Flexural Waves in Elastically Coupled Telescopic Metabeams	6
Experimental Implementation of Energy Closure Analysis for Reduced Order Modeling	6
Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator	5
Non-Linear Dynamic Modeling and Analysis of Split-Torque Face-Gear Drive Systems	5
Acoustic Waves Radiated From Two Degrees-of-Freedom Nonlinear Rigid Oscillator Systems Immersed in Unbounded Compressible Fluid	5
Reviewer’s Recognition	5
Power Efficient Active Vibration Control Via Twin Rotor Damper in the Presence of Gravity	5
Extension of Hamiltonian Mechanics to Non-Conservative Systems Via Higher-Order Dynamics	4
Modeling Noise Radiation From Concrete Box Girder Bridges as an Infinitely Long Periodic Structure Excited by a High-Speed Train	4
Dynamic Sensitivities to Fractal Machine Noises in a Mechanical Face Seal	4
A Rattle Noise Severity Index for Multi-Mesh Gear Trains Subjected to Torque Fluctuations	4
Resonant Ultrasound Spectroscopy: Sensitivity Analysis for Anisotropic Materials With Hexagonal Symmetry	4
Modal Analysis of Non-Conservative Combined Dynamic Systems	4
Did S. P. Timoshenko and P. Ehrenfest Overestimate the Importance of the Fourth-Order Time Derivative in Their Beam Theory?	4
Vibration of Complex Euler–Bernoulli and Timoshenko–Ehrenfest Beams Through Affine GPSFs	4
On the Influence of Nonlinear Inertial Forces on the Limit Cycle Oscillations of an Inextensible Plate in a Supersonic Axial Flow	4
Nonlinear Reduced Order Modeling of Structures Near Buckling and Application to an Energy Harvester	4
Acoustic Black Holes in a Spinning Beam	4
Phononic Materials for Pulse Shaping in Elastic Waveguides Motivated by Shock Testing	4
Effect of Hilbert Fractal Acoustic Metamaterials on Ventilation Noise Control	4
Interrogating the Lead-Up to a Critical Speed in Rotordynamics	4
Magnetorheological Damper Design Based on Improved H–B Model	4
Enhancing the Design Space of Bistable Laminates by Tailoring the Attachment Boundary Conditions	3
Quenching Vibration on a Symmetric Laminated Composite Plate Excited by Multiple Harmonics Using Inerter-Based Dynamic Vibration Absorbers	3
Modeling and Experiment of the Vibro-Acoustic Response of Cylindrical Shells With Internal Substructures	3
Deep Convolutional Neural Network Framework for Diagnostics of Planetary Gearboxes Under Dynamic Loading With Feature-Level Data Fusion	3
The Effects of Gravity on the Response of Centrifugal Pendulum Vibration Absorbers	3
Full-Field Modal Analysis of a Tensegrity Column Using a Three-Dimensional Scanning Laser Doppler Vibrometer With a Mirror	3
Experimental Study on Vibration Characteristics of Rotor-Rotor Inter-Shaft Labyrinth Seal Rubbing Faults in a Counter-Rotating Aero-Engine	3
Quenching Vibration on a Harmonically Excited Symmetric Laminated Composite Plate	3
Boundary-Element Analysis of the Noise Scattering for Urban Aerial Mobility Vehicles: Solver Development and Assessment	3
Application of Embedded Thermophones Toward Tonal Noise Cancelation in Small-Scale Ducted Fan	3
A Dual-Iterative Meshing Stiffness Model and Vibration Analysis for an Angular Misaligned Helical Gear Pair Considering Misalignment-Induced Contact Line Variation	2
Dynamic Behavior of a Spinning Exponentially Functionally Graded Shaft With Unbalanced Load	2
Designing Topological Acoustic Lattices via Electroacoustic Analogies	2
Sensitivity Analysis of Suppressing Vibration by Inducing a Node on a Harmonically Forced Euler–Bernoulli Beam	2
Characteristics of Self-Excited Vibration of Vertical Rotating Shaft System Considering Amplitude Dependent Nonlinearity of Sliding Bearing	2
Numerical Investigations on Static and Rotordynamic Characteristics for Two Types of Liquid Hole-Pattern Seals With Tilted Cavities	2
Impact of the Unit Cell Choice on the Efficiency of Dispersion Curve Calculations Using Generalized Bloch Mode Synthesis	2

Dynamic Modeling and Transient Response of a Rigid-Body Inductrack Maglev System	2
Computation and Assignment of the Minima of Structurally Radiated Sound Pressure	2
Acoustic Wave Splitting and Wave Trapping Designs	2
Nonlinear Damping Amplifier Friction Bearings	2
Stability and Robustness Analysis of Quasi-Periodic System Subjected to Uncertain Parametric Excitations and Nonlinear Perturbations	2
Investigation on Vibro-Impacts of Driveline System Based on a Nonlinear Clearance Element With Time-Varying Stiffness and Oil-Squeeze Damping	2
Dynamic Analysis and Design of Metamaterial Plates With Crossed Acoustic Black Holes for Vibration Control	2
Optimizing Cable Wrapping Patterns to Neutralize Dynamic Impacts on Host Plate Structures for Space Applications	2
New Straightforward Benchmark Solutions for Bending and Free Vibration of Clamped Anisotropic Rectangular Thin Plates	2
A Simple Configuration of an Actively Synthesized Gyroscopic-Nonreciprocal Acoustic Metamaterial	2
Prediction of Squeal Instabilities of a Finite Element Model Automotive Brake With Uncertain Structural and Environmental Parameters With a Hybrid Surrogate Model	2
Free Vibration of Timoshenko–Ehrenfest Beams and Frameworks Using Frequency-Dependent Mass and Stiffness Matrices	2
Erratum: “Impact of the Unit Cell Choice on the Efficiency of Dispersion Curve Calculations Using GBMS” [ASME J. Vib. Acoust. 144(2), p. 024501; DOI: 10.1115/1.4051817]	2
Experimental and Theoretical Investigation of Vibro-impact Motions of a Gear Pair Subjected to Torque Fluctuations to Define a Rattle Noise Severity Index	2
First-Passage Problem in Random Vibrations With Radial Basis Function Neural Networks	2
Quasi-Periodic Motions of a Gear Transmission System With Piecewise Linearities by the Incremental Harmonic Balance Method With Two Timescales	1
Low-Frequency Acoustic Performance of a Microperforated Panel Integrated Coiled-Up Space Absorber With Subwavelength Thickness	1
Numerical computation of time-averaged acoustic radiation force on arbitrarily-shaped particles using an improved immersed boundary method	1
An Electromagnetic Energy Harvester of Large-Scale Bistable Motion by Application of Stochastic Resonance	1
Evaluation of Relationship Between Shape of a Rigid Body Unifilar Centrifugal Pendulum Vibration Absorber and Vibration Suppression Performance	1
Transient Vibroacoustic Analysis of Functionally Graded Plates	1
Acoustic Radiation From Stiffened Double Concentric Large Cylindrical Shells: Part II Creeping Waves	1
Acoustic Performance of a Metascreen-Based Coating for Maritime Applications	1
Acoustic Wave Manipulation by Phase Conjugate Metasurface	1
Pseudospectral Continuation for Aeroelastic Stability Analysis	1
Active Vibration Control of a Small-Scale Flexible Structure Subject to Moving-Loads and Experimental Validation	1
Design Method of Tuned Mass Damper by Linear-Matrix-Inequality-Based Robust Control Theory for Seismic Excitation	1
Measurement, Modeling, and Analysis of the Dynamic Properties of Resilient Elements Used for Vibration Isolation	1
Prognostics of Gear Manufacturing Errors for Planetary Gear Systems Based on Power Flow Theory	1
Active Vibration Control on a Smart Composite Structure Using Modal-Shaped Sliding Mode Control	1
Physical Reservoir Computing in a Music Hall Experiment	1
X-DoF: Automatic Degree-of-Freedom Subset Selection for Inverse Blocked Force Characterization	1
Experimental Modal Analysis of Stators Analyzing the Effects of Lamination and Winding	1
Response of Quasi-Integrable and Resonant Hamiltonian Systems to Fractional Gaussian Noise	1
Robustness Analysis of Asymmetric Nonlinear Energy Sink via Nonlinear Normal Modes	1
Modeling the Response of Structure–Tuned Liquid Damper Systems Under Large Amplitude Excitation Using Smoothed Particle Hydrodynamics	1
ASME 2024 International Design Engineering Technical Conference	1
Reformulation for the Solution of the Dynamic Response of Co-Axial Segmented Beams	1
Experimental Verification of Pulse Shaping in Elastic Metamaterials Under Impact Excitation	1
Broadband Sound Transmission Loss in a Corrugated Sound Panel Using Periodic Structure Theory	1
Operational Modal Analysis of a Rotating Structure Subject to Random Excitation Using a Tracking Continuously Scanning Laser Doppler Vibrometer via an Improved Demodulation Method	1
A Contact Load Distribution Model to Capture the Influence of Structurally Compliant Rotating Ring Gear on the Dynamic Response of Epicyclic Gear Sets	1
Responses of a Strongly Forced Mathieu Equation—Part 2: Constant Loading	1
Influence of the Magnitude of the Taper Angle of Divergent and Convergent Tapered Annular Seals on the Stability of a Vertical Rotor-Seal System	1
Shock Isolation Characteristics of a Bistable Vibration Isolator With Tunable Magnetic Controlled Stiffness	1
Digital Twin Implementation for Three-Dimensional Rotordynamic Response via Physics-Informed LSTM Neural Networks	1
Numerical Analysis of the Tread Grooves’ Acoustic Resonances for the Investigation of Tire Noise	1
Coupled Thermo-Electric-Elastic Piezoelectric Vibration Energy Harvester With Axial Movement: Modeling, Verification, and Analysis	1
On the Feasibility of Dynamic Substructuring for Hybrid Testing of Vibrating Structures	1
Topology Optimization and Wave Propagation of Three-Dimensional Phononic Crystals	1
An Approach to Modeling Percussive Drilling Systems	1
Free Vibration Analysis of Elastically Restrained Laminated Planar Frames	1
Flexural–Torsional Free Vibration Analysis of a Double-Cantilever Structure	1
Free and Forced Wave Vibration Analysis of a Timoshenko Beam/Frame Carrying a Two Degrees-of-Freedom Spring-Mass System	1
How Intrusive Are Accelerometers for Measuring Nonlinear Vibrations? A Case Study on a Compressor Blade Subjected to Vibro-Impact Dynamics	1
Nonlinear Restoring Force Identification of Strongly Nonlinear Structures by Displacement Measurement	1
Contact Nonlinearity in Indenter–Foam Dampers	1
System Tautochronic Path for Pendulum Vibration Absorber Based on Simple Harmonic Oscillator Transformation	1