Philosophical Magazine

Papers
(The TQCC of Philosophical Magazine is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-07-01 to 2024-07-01.)
ArticleCitations
Electronic and thermoelectric properties of the layered Zintl phase CaIn2P2: first-principles calculations108
Stark shift and exciton binding energy in parabolic quantum dots: hydrostatic pressure, temperature, and electric field effects29
Theoretical and experimental study on phase stability of TiVZrMoW refractory high entropy alloy28
Microstructure evolution of 316L stainless steel during solid-state additive friction stir deposition23
Electronic, optical and magnetic properties of PrXO3(X = V, Cr): first-principle calculations23
Spatio-temporal dynamics of jerky flow in high-entropy alloy at extremely low temperature22
Laguerre tessellations and polycrystalline microstructures: a fast algorithm for generating grains of given volumes21
Thermodynamic phase diagram and thermoelectric properties of LiMgZ (Z = P, As, Bi): ab initio method study20
Insights of electronic structures, mechanical properties and thermal conductivities of TM5SiB2(TM=V, Nb, and Ta) MAB phases19
Hot compressive deformation behaviour and constitutive equations of Mg–Pb–Al–1B–0.4Sc alloy18
Effect of magnetic field on donor impurity-related photoionisation cross-section in multilayered quantum dot17
Influence of vacancy on the mechanical and thermodynamic properties of PtAl2 from the first-principles investigation17
Zeeman splitting, Zeeman transitions and optical absorption of an electron confined in spherical quantum dots under the magnetic field16
Theoretical study of structural, electronic and lattice dynamical properties of novel AlNiP half-Heusler alloy16
Study the influence of oxygen-deficient (δ = 0.135) in SrFeO3-δ nanoparticles perovskite on structural, electrical and magnetic properties14
On the breakdown of the Nix-Gao model for indentation size effect14
Pressure dependence of the electronic, optical, thermoelectric, thermodynamic properties of CsVO 3 : first-principles study13
Austenite grain growth kinetics and mechanism of grain growth in 12Cr ultra-super-critical rotor steel12
Clarifying the definition of ‘transonic’ screw dislocations12
Stable nanocrystalline structure attainment and strength enhancement of Cu base alloy using bi-modal distributed tungsten dispersoids11
Magnetocaloric effect and magnetic properties of Dy2CoMnO6: Monte Carlo study11
Effects of hydrostatic pressure and temperature on the nonlinear optical properties of GaAs/GaAlAs zigzag quantum well11
Variations in the band gap of semiconducting glassy chalcogenides with composition11
On the strengthening and the strength reducing mechanisms at aluminium matrix composites reinforced with nano-sized TiCN particulates11
Hot deformation induced microstructure evolution of a novel as-extruded Ni-based P/M superalloy10
Effect of transition elements on dispersoid formation and elevated-temperature mechanical properties in 6082 aluminum alloy10
Thermoelectric and optical properties of the SrS graphene by DFT10
Nanosecond laser ablation of a metallic glass in water: a high time-resolved imaging study9
Multi-scale iron-rich phases induce fine microstructures in Al-Zn-Mg-Cu-Fe alloys9
Frictional contact problem of a rigid charged indenter on two dimensional hexagonal piezoelectric quasicrystals coating9
Unraveling Mg 〈c + a〉 slip using neural network potential9
The response of boronized 34CrAlMo5-10 (EN41B) steel to nanoindentation, oxidation, and wear9
Effect of Ni/Fe ratio on microstructure, tensile flow and work hardening behaviour of tungsten heavy alloys in heat treated and swaged conditions9
DFT aspects of the elastic, mechanical, magnetic, thermodynamic and optical properties of Ce3XY perovskites9
The electric and magnetic field effects on the optical absorption in double QWs with squared, U-shaped and V-shaped confinement potentials8
Improving the dispersoid distribution and recrystallization resistance of a Zr-containing 6xxx alloy using two-step homogenization8
Influence of precipitates on basal dislocation slip and twinning in AZ91 micro-pillars8
Effect of temperature on the neutron irradiation-induced cavities in tungsten8
Variation of average coordination number with liquid fraction for two-dimensional foams with finite contact angle8
Structural heritage of metallic glasses and relevant crystals understood via the principal cluster8
GdPtBi Heuslerene: mechanical stability, half-metallic, magneto-optic, and thermoelectric properties by DFT8
Understanding raft formation and precipitate shearing during double minimum creep in a γ′-strengthened single crystalline Co-base superalloy8
Evolution of solidification structure, primary phase and wear properties of Sn–11wt%Sb alloy ingots under permanent magnet stirring8
Glass-forming ability of Ni-Zr-Al alloys: the interplay of thermodynamic and geometric factors8
On the mechanical response and intermetallic compound formation in Al/Fe interface: molecular dynamics analyses8
‘Turbulent’ shear flow of solids under high-pressure torsion7
Phase diagrams and magnetisations of mixed spin nanoparticles with transverse field and crystal field7
Texture evolution and corrosion behaviour of Sn–1.5 wt% Cr coatings containing Graphene oxide7
High temperature and pressure study on structural and thermophysical properties of Co2XAl (X = Zr, Nb, Hf) Heusler materials by density functional theory calculations7
Multiphase modelling of the growth kinetics of precipitates in Al-Cu alloys during artificial aging7
The effects of elastic cycling in nanoindentation of a metallic glass7
On the intermetallic constituents in the sodium-induced edge cracking of hot-rolled AA5182 aluminum alloys7
Revealing the interface characteristic of the semi-coherent Co(111)/WC(0001) interface: a first principles investigation7
Microstructure and mechanical properties of Al0.5CoCuNiTi high entropy alloy7
Tuning of nonlinear optical characteristics of a cylindrical quantum dot by external fields and structure parameters6
Atomistic study on simultaneous achievement of partial crystallization and rejuvenated glassy structure in thermal process of metallic glasses6
Atomistic simulation of crack propagation in CNT reinforced nanocrystalline aluminum under uniaxial tensile loading6
Bridge constant and atom between theoretical and experimental magnetism in Ni2MnSb Heusler alloy: DFT and EFT studies6
Ground state phase diagrams and ferroelectric hysteresis loops behaviour of dendrimer superlattice: a Monte Carlo study6
Prediction of residual stresses of second kind in deep drawing using an incremental two-scale material model6
Structure and properties of dislocations and the twin boundary on (101) in β-cyclotetramethylene tetranitramine6
CNT-reinforced Al-xZr (x = 0.25, 0.5 and 1 wt.%) surface composites fabricated by friction stir processing: microstructural, mechanical and wear characterisation6
A dislocation assisted self-consistent constitutive model for the high-temperature deformation of particulate metal-matrix composite6
Microstructure evolution and wear behaviour of VN strengthened 17-4PH stainless steel fabricated by metal injection molding6
Effects of alloying elements on the generalised stacking fault energies of Pt: a first-principles study6
Analysis of microstructure, kinetics of isothermal solidification and mechanical properties of IN718/MBF-20/SS316L TLP joints6
Microtwinning in the nickel-based superalloy CM247LC during compression tests6
Magnetisation and magneto-transport measurements on CeBi single crystals6
A novel approach of high-voltage low-current electric energy input to synthesise cost-effective ultra-strong ductile material5
Backstresses in geologic materials quantified by nanoindentation load-drop experiments5
Structural, elastic, electronic and optical investigations of fluoride-perovskite NaBeF3: first-principles calculations5
EBSD Microstructural studies on quenched-tempered API 5L X65 pipeline steel5
Microstructure evolution and mechanical properties of low-silicon cast aluminium alloys with varying Mn contents5
Phase field mechanics of residually stressed ceramic composites5
Effect of temperature on the evolution dynamics of voids in dynamic fracture of single crystal iron: a molecular dynamics study5
Robust half-metallicity in CoZrMnZ (Z = P, As and Sb) quaternary Heusler alloys5
On the evolution of protective oxide chemistry and corrosion resistance of electrodeposited FeCrMnNiCo-carbon nanotube composite coatings5
Nanoindentation characteristics of nanocrystalline tungsten via atomistic simulation5
Adjusting the balance between strength and ductile of the tetragonal TiAl3 alloy: a first-principles investigation5
Electron spin and donor impurity effects on the absorption spectra of pseudo-elliptic quantum rings under magnetic field5
Effects of rare earth elements (Ce, La) on microstructure and mechanical properties in compacted graphite iron5
Revealing boron adsorption on the α-Ti(0001) surface by first-principles calculations5
Hydrogen states in mixed-cation CuIn(1−x)GaxSe2 chalcopyrite alloys: a combined study by first-principles density-functional calculations and muon-spin s5
Solidification simulation of single-phase Fe–Co–Cr–Ni–V high entropy alloy5
Molecular dynamics simulation of the growth and diffusion mechanisms of Fe–Cu bimetallic nanoparticles4
Buckling of a tilted line of confined hard spheres4
An advanced dislocation density-based approach to model the tensile flow behaviour of a 64.7Ni–31.96Cu alloy4
Tridimensional electric field effect on diamagnetic susceptibility and polarisability of a donor impurity in a double quantum dot4
Utilising physics-informed neural networks for optimisation of diffusion coefficients in pseudo-binary diffusion couples4
On the use of autocorrelation functions, permeability tensors, and computed tomography to characterise the anisotropy of diesel particulate filter materials4
Direct experimental evidence of phonon–phason coupling in an Al-Pd-Mn icosahedral quasicrystal4
Anomalous dependence of thermoelectric parameters on carrier concentration and electronic structure in Mn-substituted Fe2CrAl Heusler alloy4
Small-scale deformation behaviour of the AlCoCrFeNi2.1 eutectic high entropy alloy4
Atomistic study on the anomalous temperature-dependent dynamic tensile strength of ice under shock loading4
Effects of vacancies on structural, electronic, mechanical, and thermodynamic properties of C40-VSi 24
Texture and grain boundary engineering in electrodeposited SnCu coatings and its effect on coating corrosion behaviour4
Intensity characterisation of polarisation vortex formation and evolution in ferroelectric nanofilms4
Geometry tailored magneto-optical absorption spectra of elliptically deformed double quantum rings4
Electrochemical impedance spectroscopy study of AgI–Ag2O–MoO3 glasses: understanding the diffusion, relaxation, fragility and power law behaviour4
New insight into the role of inclusions in hydrogen-induced degradation of fracture toughness: three-dimensional imaging and modeling4
Microstructural characterisation and mechanical properties of Ti-5Al-5V-5Mo-3Cr built by wire and arc additive manufacture4
Pressure effects on structure, mechanical properties and thermal conductivity of V2SnC: a first-principles study4
Texture-dependent dwell fatigue response of titanium4
The role of electric current in the formation of white-etching-cracks4
Study of the ductility enhancement of 5A90 Al–Mg–Li alloy sheets with stress relaxation4
Effects of applied magnetic field and pressure on the diamagnetic susceptibility and binding energy of donor impurity in GaAs quantum dot considering the non-parabolicity model’s influence4
Thermodynamic behaviour of a D2+ molecular complex in quantum rings under the combined effects of nonresonant intense laser field radiation and electric field4
The effect of in-doping on the quantum information entropy of hydrogenic impurity states in the InxGa1-xN semiconductor quantum dot4
Effect of chromium coating roughness and thickness on interfacial heat transfer behaviour of sub-rapid solidification process4
{101̄2} twinning in single-crystal titanium under shock loading4
Phenomenological approach of the thermodynamic properties of the charge density wave systems4
Structural and magnetic characterisation of Co substituted Ni2MnSb Heusler alloy: effect of cobalt substitution on magnetism and Curie temperature4
A micropolar continuum model of diffusion creep3
Predicting radiation damage in beryllium3
Fine tungsten precipitates in the matrix phase and their influence on the mechanical properties of a tungsten heavy alloy3
Generalised plane strain embedded in three-dimensional anisotropic elasticity3
Investigation of structural, electronic, magnetic, elastic and thermodynamic properties of Mn3GaN antiperovskite by first principle and Monte Carlo simulations3
Numerical simulations on the high-frequency dynamic mechanical response of single-crystalline Ni–Mn–Ga samples3
On the electrical conductivity of metals with a rough surface3
Multi-scale modelling of creep cavity nucleation and growth in polycrystalline Type 316 stainless steel3
The investigation of magnetic phase transitions and magnetocaloric properties in high-pressure annealed MnNiFeGe alloy3
Effects of pressure-temperature protocols on the properties of crystals and ageing effects – an analogy with glasses3
Magnetic phase transitions of phosphorene-like nano-structure: Monte Carlo study3
Non-hydrodynamic modes in viscoelastic behaviour of simple fluids3
Driving force of zero-macroscopic-strain deformation twinning in face-centred-cubic metals3
Tensorial permeability microstructure model considering crystallographic texture and grain size for evaluation of magnetic anisotropy in polycrystalline steels3
Analysis of temperature effect on isothermal solidification completion time during transient liquid phase bonding3
Flow serrations of rejuvenation behaviour through cryogenic thermal cycling for Zr-based bulk metallic glass3
Migration energy of a self-interstitial atom in α-iron estimated by in situ observation of interstitial clusters at low temperatures using high-voltage electron microscopy3
Evaluation of mechanical properties of Bi12SiO20sillenite using first principles and nanoindentation3
Finite element simulation of the Portevin–Le Chatelier effect in highly reinforced metal matrix composites3
Straight and curved disclinations and dislocation equivalents3
Finite-temperature first-principles calculations of Al 〈100〉 symmetric tilt grain-boundary energy3
Faceting of twin interfaces in rolled pure magnesium3
A new approach to design multicomponent metallic glasses using the mendeleev number3
Evolution of a self-assembled chessboard nanostructure spinel in a CoFeGaMnZn multicomponent oxide3
Ground and two low-lying excited states binding energy in (Al,Ga)N/AlN double quantum wells: temperature and electric field effects3
Effect of different interlayers on microstructure and mechanical properties of diffusion-bonded joints between SiC and 316LN3
Closed-form functions of cross-scale indentation scaling relationships based on a strain gradient plasticity theory3
Stability of polarisation vortex in ferroelectric nanofilm under stress or curled electric field3
The microstructure, melting properties and wettability of Sn–3.5Ag–0.7Cu–xIn lead-free solder alloys3
Whereabouts of missing atoms in a laser-injected Si (Part III)3
Enhancement of superconductivity by electronic nematicity in cuprate superconductors3
Effect of stable stacking fault energy and crystal orientation on fracture behaviour of thin metallic single crystals3
Effect of plasma carbonitriding on the high-temperature tribological properties of a TiAlCrN coating on 300M steel by multi-arc ion plating3
Creep properties and deformation mechanisms of single-crystalline γ′-strengthened superalloys in dependence of the Co/Ni ratio3
The near singular boundaries in BCC iron3
Strain dependences of electronic properties, band alignments and thermal properties of bilayer WX2 (X = Se, Te)3
Investigation on nonlinear optical properties of symmetric and asymmetric double V-shaped AlxGa1-xAs/GaAs potential wells with structural parameters and external electromagnetic 3
Constitutive equation and microstructure analysis of Al0.6CoCrFeNi high entropy alloy during hot deformation3
Investigation of structural and optical properties of deposited mercury sulphide thin layers as a function of growth time3
The role of topological defects on the mechanical properties of single-walled carbon nanotubes3
The electronic, magnetic and half-metallic predictions of Mx (M = Ag, Cd, Y, Zr, Nb, and x = 0, 0.125, 0.25, 1)W1-xSn alloys3
Role of temperature and precipitates on the evolution of microstructure and texture during grain growth of Mg–3Al–0.2Ce alloy3
Extrinsic plastic hardening of polymer thin films in flat punch indentation3
0.051151990890503