OOIR: Observatory of International Research

Papers

(The median citation count of Corrosion Engineering Science and Technology is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)

Article	Citations
Advancement of corrosion inhibitor system through N-heterocyclic compounds: a review	20
Corrosion of porous Mg and Fe scaffolds: a review of mechanical and biocompatibility responses	15
Long-term corrosion behaviour of 1060 aluminium in deep-sea environment of South China Sea	14
Hydrostatic pressure effects on corrosion behaviour of X80 steel in artificial sea water	13
Corrosion behaviour of X60 steel in the presence of sulphate-reducing bacteria (SRB) and iron-reducing bacteria (IRB) in seawater	12
Influence of additive manufacturing by laser powder bed fusion on the susceptibility of Alloy 718 to hydrogen embrittlement	12
Phase evolution, microstructure, microhardness and corrosion performance of CoCrFeNiNb_x high entropy alloy coatings on 316 stainless steel fabricated by laser cladding	12
Research on corrosion behaviour of X65 pipeline steel under dynamic AC interference	11
8-Hydroxyquinoline/nanoclay epoxy nanocomposite as a smart coating for early corrosion detection	11
Smart corrosion inhibitors for controlled release: a review	10
Effect of friction stir welding parameters on corrosion behaviour of aluminium alloys: an overview	10
Polyvinyl alcohol (PVA) as a biodegradable polymeric anticorrosive material: A review on present advancements and future directions	10
Understanding imidazole derivatives effect as a corrosion inhibitor for brass in nitric acid: a combined experimental and theoretical assessments	9
A high-resolution characterisation of localised corrosion of AA5083-H111 in simulated seawater by TEM	8
The synergistic effect of sodium phytate and benzotriazole as corrosion inhibitors of 20SiMn steel in 3.5 wt-% NaCl solution	8
Atmospheric corrosion severity and the precision of salt deposition measurements made by the wet candle method	7
Structural and electrochemical corrosion properties of plasma-sprayed CoCrFeNiMo HEA coating in corrosive solutions	7
Microstructure, mechanical properties and corrosion fatigue behaviour of biodegradable Mg–Zn–Y–Nd alloy prepared by double extrusion	7
Influence of chloride ions concentration on the development of severe localised corrosion and its effects on the electrochemical response of the 2198-T8 alloy	7
Effect of ultrasonic impact treatment on corrosion fatigue performance of friction stir welded 2024-T4 aluminum alloy	7
Corrosion behaviour characterisation of 316L stainless steel and Inconel 625 in supercritical water containing hydrochloric acid and high oxygen	7
Localised corrosion of intermetallic particles on aluminium AA2099-T8	7
Phosphate loaded layered double hydroxides for active corrosion protection of carbon steel	7
Localised aqueous corrosion of electroless nickel immersion gold-coated copper	6
Mapping of the cost of atmospheric corrosion of zinc and galvanised steel due to the effect of atmospheric pollution in the Mexico City Metropolitan area	6

Experimental study on passivation and corrosion performances of pre-rusted steel in simulated concrete pore solution	6
The bifunctional role played by thiocyanate anions on the active dissolution and the passive film of titanium in hydrochloric acid	6
A dimensional metrology-based approach for corrosion measurement of ship grade steels exposed to various marine environmental conditions	6
The role of acetic acid in FeCO₃ scale deposition on CO₂ corrosion of API X65 carbon steel under high temperatures	6
TSA anodising voltage effects on the near-surface coarse intermetallic particles in the AA2024-T3 and AA2198-T8 alloys	6
Ten years outdoor exposure of steel in an urban and coastal tropical atmosphere	6
Myrtus communisextract: a bio-controller for microbial corrosion induced by sulphate reducing bacteria	6
Long-term corrosion of steels in deep, cold, low oxygen sea waters	6
Isothermal and cyclic corrosion behaviour of Ni-based alloys in an electrochemical reduction process	6
Monitoring corrosion rates with ER-probes – a critical assessment based on experiments and numerical modelling	6
Comparative corrosion behaviour of stainless steels and their welds in wet-process phosphoric acid	6
Investigation of steel corrosion near the air–liquid interface in NaCl solution and soil environment	6
The effect of Mn addition on corrosion behaviour of equiatomic CoCrFeNi high entropy alloys in NaCl solution	5
Effect of stress on the crevice corrosion of P110 steel in the CO₂-saturated NaCl solution containing thiosulphate/H₂S	5
Effect of hot extrusion on AZ91 alloy corrosion behaviour	5
Application of accelerated cyclic test with synthetic ocean water salt-deposition process to the evaluation on corrosion characteristics of weathering steel	5
Role of La addition for enhancing the corrosion resistance of Mg–Dy alloy	5
Study on double peaks aging strengthening and stress corrosion cracking behaviour of 7075 aluminium alloy	5
The influence of mechanical grinding on the microstructure and corrosion behaviour of A356 aluminium alloys	5
Corrosion behaviours of Ni-Mo-Cr alloy and 316 stainless steel in molten NaCl-KCl-AlCl₃ salts at high temperature	5
Polyaniline modified attapulgite incorporated in alkyd paint for carbon steel corrosion inhibition	5
Comparative corrosion behaviour of austenitic 316L and duplex 2205 stainless steels: microstructure and property evolution at highly partial pressure of H₂S	5
Non-destructive techniques for corrosion detection: A review	5
Corrosion rate of carbon steel in carbonated concrete made with different supplementary cementitious materials	4
FEM simulation of a grounded carbon steel pipe under impressed current cathodic protection	4
Effect of HSO₃⁻ and alternating current on corrosion behaviour and mechanism of CoCrFeNi HEA in a simulated marine environment	4
A synergistic anti-corrosion effect of longan residue extract and sodium dodecylbenzenesulfonate composition on AZ91D magnesium alloy in NaCl solution	4
Results of an international round-robin exercise on electrochemical impedance spectroscopy	4
Plant wastes as alternative sources of sustainable and green corrosion inhibitors in different environments	4
Enhanced corrosion protection of AZ31B magnesium alloy by MgAl-LDHs composite coatings double-doped with imidazolium ionic liquid and sodium dodecylbenzenesulphonate	4
Effects of Ga addition on the corrosion behaviours of high strain rate rolled Mg–Ga alloy sheets	4
Comparing the corrosion behaviour of AA2050 and AA7050 aluminium alloys by scanning vibrating electrode and scanning ion-selective electrode techniques	4
Semiconductor electrochemical study of the passivity limits of austenitic stainless-steel in H₂S-containing brines	4
Analysis of metal corrosion methods and identification of cost-efficient and low corrosion deicing agents	4
Relationship between natural exposure testing and cyclic corrosion testing ISO 20340 for the assessment of the durability of powder-coated steel	4
DL-EPR vs. LSV-KOH: from simple detection of deleterious phases to analysis of morphology and high accuracy on determination of sigma phase in UNS S32750 stainless steel	4
Improving corrosion resistance of high strength Mg-Zn-Y alloy through Ca addition	4
Corrosion behaviour of Ni-based alloy Inconel 740H in supercritical carbon dioxide at 650–700°C	4
Corrosion rates of reabsorbable Mg-based materials coated with phytic acid	4
Long-term marine immersion corrosion of welded ABS grade steels	4
Effects of Mo additions on the potentiostatic corrosion behaviour of multiphase 316L SS-based alloys	4
Synergistic inhibition of cerium and alkyl phosphate composite adlayer on pitting corrosion of Al–Mg–Si aluminium alloy	4
Si segregation and relevant effect on the corrosion propagation in F/M steel exposed to liquid lead-bismuth eutectic	4
Real-time characterisation of interfacial response of X52 steel under slow strain rate deformation in high-pH carbonate–bicarbonate solution	3
Effect of CO₂ content on corrosion non-uniformity of 20# steel in oil–water two-phase based on wire beam electrode technique	3
Ultra-low cycle fatigue properties and fracture mechanism of corroded structural steel	3
Corrosion behaviour of bioinspired laminated Al matrix composite hybrid reinforced with B₄C and graphene nanoplatelets	3
Countermeasure for corrosion and hydrogen embrittlement of Ni-Ti superelastic alloy in acidic fluoride solution by adding sodium bicarbonate and hydrogen peroxide	3
Investigation of surface treatment effects on the environmentally-assisted cracking behaviour of Alloy 182 in boiling water reactor environment	3
Investigating crevice corrosion of copper and copper alloys using wire beam electrode	3

Effect of strain-induced martensite reverse transformation on microstructure evolution and electrochemical behaviour of 2304 lean duplex stainless steel	3
Formation ofEscherichia colibiofilms on the titanium alloy Ti6Al4V: analysis of the interface and assessment of corrosion	3
Inhibition effect of nano-silica synergistic corrosion inhibitor on 110SSsteel in ultra-high temperature organic acidic environment	3
The effect of H₂S and NaCl concentration on hydrogen permeation in high strength low alloy carbon steel C110	3
Prediction of surf-zone and open-ocean airborne sea-salt spatial distribution via computational fluid dynamics and statistical method	3
Effect of adding Y and Ce on corrosion behaviour of the extruded ZK60 magnesium alloy	3
Electrochemical noise studies on the effect of nitrogen on the pitting corrosion of stainless steel using wavelet analysis	3
Early identification of stress corrosion cracking of P110 low alloy steel in downhole fluid by electrochemical noise measurement	3
Electrochemical thermodynamics of stress corrosion of pipeline steel in active and passive environments studied by scanning Kelvin probe	3
Investigating the effects of pre-deformation and aging conditions on localised corrosion behaviour of aluminium alloy 6061 via electrochemical polarisation	3
Cathodic disbonding of self-healing composite coatings: effect of ethyl cellulose micro/nanocapsules	3
Comparative study of two equivalent circuit models for electrochemical impedance spectroscopy analysis of epoxy zinc-rich coatings	3
Effect of Ti on the corrosion behaviour of as-cast Fe–17Cr ferritic stainless steel	3
Nanotechnology in the service of corrosion science: considering graphene and derivatives as examples	3
Effect of pH on corrosion behaviour of CoCrNi MEA imposed by alternating current in Na₂CO₃/NaHCO₃ solution	3
Influence of the casting process on corrosion behaviour of 2024-T6 aluminium alloy in different conditions of pH and NaCl concentration	3
The evaluation of oxide scale formation during hot corrosion of Rene-80 superalloy under thermal shock at different dwell times	3
Numerical analysis of topographic and Volta potential profiles during corrosion of duplex stainless steel in chloride solution	3
Corrosion under insulation of pipeline steel in groundwater containing sulphate-reducing bacteria	3
Graphene oxide as an anti-corrosion coating on carbon steel: effect of surface structure and wettability of steel	3
Long-term corrosion of abandoned offshore steel infrastructure	2
Cyclic oxidation and hot corrosion performance of direct metal laser sintered and wrought alloy 718 at 800°C in air and molten salts containing Na₂SO₄, V₂O₅	2
Influence of available chlorine on corrosion behaviour of low alloy marine steel in natural seawater	2
The impact of non-uniformity and resistivity on the homogenised corrosion parameters of rebars in concrete – a circuit model analysis	2
Mechanistic understanding for the formation of Cr-rich haematite layer on the T12 ferritic steel in supercritical water	2
Pre-treatments in silicate solutions to mitigate reinforcing steel corrosion in chloride-contaminated environments	2
Aluminium alloy corrosion inhibition by a two-stage modified nanoporous zeolite	2
Effect of the oxidation reaction interface on the accelerated corrosion behaviour of Al–Mg–Si alloy	2
Effects of Cr content on the corrosion behaviour of porous Ni–Cr–Mo–Cu alloys	2
Effect of heat flux on metal corrosion in non-boiling media: testing system, heat transfer simulations, and corrosion study on Al alloy	2
Cavitation erosion and corrosion-cavitation synergism behaviour of CoCrFeNiMnTi_x high entropy alloy coatings prepared by laser cladding	2
Room temperature corrosion behaviour of plastically deformed AISI 304 stainless steel by friction stir welding in neutral and acidified chloride solutions	2
Corrosion behaviour and properties of Mg–3.4Y–3.6Sm–2.6Zn–0.8Zr Alloy in 3.5 wt-% NaCl solution	2
Estimation of long-term corrosion resistance of structural metals and mapping the continental territory of the Russian Federation for various time periods	2
Biofuels-related materials deterioration in biorefineries, transportation and internal combustion engines: a technical review	2
Sand impingements on cathodic protection of marine carbon steel in natural sea water	2
Corrosion behaviour of zinc exposed to an extreme tropical marine atmospheric environment for 3 years	2
Estimation of the long-term corrosion resistance of typical metals in the coastal regions of the Russian Federation	2
Mechanical properties and biocorrosion behaviour of as-cast Zn-xCu-Sr alloys for cardiovascular bioabsorbable devices	2
Research of the microstructure, mechanical property and corrosion behaviours of Mg–Y–Zn–Mn(–Mo) alloy with solution treatment	2
A flow loop study on the effect of Ca²⁺ ions on the CO₂ corrosion of 1Cr carbon steel in a CaCO₃-saturated solution	2
Influence of melt treatment of AZ91D alloy on phase morphology and corrosion behaviour in Hank's solution	2
Corrosion behaviour of carbon steel in Beibu Gulf tidal zone	2
Accelerated corrosion test and field test of steel and zinc coupons at buffer areas and cross passages in a mass rapid transit tunnel	2
Corrosion of steel gas pipe under stray current from electro-osmotic pulse water-proof system	2
Effect of refrigerant absorbent combinations in the corrosion resistance of copper as structural material in absorption refrigeration systems (ARS)	2
An analysis on spatial properties of corroded surface of weathering steel by different environmental conditions	2
Artificial neural network modelling to predict the efficiency of aluminium sacrificial anode	2
Effect of exposure time with SO₂ as an impurity on the corrosion behaviour of pipeline steel in CCS transportation	1
Quantitative analysis of susceptibility to intergranular corrosion in alloy 625 joined by friction stir welding	1
Effect of Bi content on microstructure and corrosion behaviour of Zn–8Al–(Bi) alloys	1
Use of impressed current for accelerated corrosion testing of aluminium alloy panels	1
Effect of cathode pulse square-wave on the microstructure and corrosion resistance of PEO coatings of AZ91D magnesium alloy prepared in the Na₂C₄H₄O₆–KF–Na<	1
Electrochemical corrosion of FV520B stainless steel in solutions bearing hydrogen bromide and acetic acid at high temperature from 130 to 200 °C	1
Impact of added Inconel and stainless steel on zirconium-based alloys for nuclear waste applications	1
Effects of silty sand and pH on the formation of corrosion film and corrosion behaviour of low-Cr steel in the CO₂ environment	1
Effect of post-welding sensitisation on the degree of sensitisation of the welding zones of AISI 304 resistance spot welding joints studied by using an electrochemical minicell	1
Electrochemical behaviour of graphene and alumina whisker co-reinforced copper matrix composites	1
Fabrication and corrosion resistance research of stearic acid-doped silane composite passivation film on electrolytic manganese	1
Investigation of corrosion behaviour on Ni–Cr–Co and Ni–Cr–Mo alloys exposed to molten salt for thermal energy storage applications	1
Corrosion behaviours of B + F dual-phase X80 pipeline steel in simulated near neutral and acidic soil solution	1
A new approach for quantification of corrosion losses on steels exposed to an artificial seawater environment	1
Effect of dispersed oxide of cerium, lanthanum and thorium on the corrosion behaviour of tungsten in 3.5 wt-% NaCl solution	1
Effect of Ai–Si coating weights on corrosion of ultra-high-strength steel Usibor^R 1500 used in automotive structures	1
Negative effect of Hf and Zr co-doping on alumina film growth of nickel-aluminium single-crystals during thermal cyclic oxidation	1
Tafel slopes and exchange current densities of oxygen reduction and hydrogen evolution on steel	1
An overview of recent progresses in probing and understanding corrosion under disbonded coatings	1
Evaluation of the passivity limits in austenitic stainless steel exposed to H₂S-containing brines using point defect model analysis	1
A new approach in top-of-line corrosion studies in CO₂/H₂S environment	1
Corrosion behaviour of heterogeneous antimony-copper layers in chloride media	1
Topographical profiles and mechanical property of corrosion product films on a pipeline steel in Desulfovibrio vulgaris-containing thin electrolyte layer characterised by atomic force microscop	1
Effects of Sr on the glass-forming ability and corrosion behaviour of Mg–Zn–Ca–Cu bulk metallic glass	1
Effect of hydrostatic pressure on galvanic corrosion of low-alloy steel in simulated deep-sea environments	1
Localised corrosion failure of an L245N pipeline in a CO₂–O₂–Cl⁻ environment	1
TEM investigation of SCC crack tips in high Si stainless steel tapered specimens	1
Laser surface melting of 304L SS: increase in resistance to transpassive dissolution and pitting corrosion	1
Comparison of H₂S high-temperature corrosion characteristics of three kinds of low-alloy and heat-resistant-steel tubes	1
Stress corrosion crack propagation behaviour of MAO ceramic coating on Mg alloy	1
Effect of temperature on corrosion behaviour of 15CrMo steel in saline (Na₂siO₃) steam/water	1
Effect of applied low-voltage spatial electric field on the corrosion behaviour of copper in 3.5 wt-% NaCl solution	1

Corrosion monitoring at the interface using sensors and advanced sensing materials: methods, challenges and opportunities	1
Effect of the microstructural properties of copper on corrosion performance	1
Analysis of environmentally assisted crack initiation of Alloy 182 in simulated light water reactor primary water with the engineering initiation model EngInit	1
Influence of applied stress on the corrosion resistance of micro-arc oxide coatings on AZ31B magnesium alloy	1
Investigating the effects of pre-deformation and aging conditions on mechanical properties and SCC resistance of aluminium alloy 7075 via slow strain rate testing and electrochemical polarisation	1
EUROCORR 2020: ‘closing the gap between industry and academia in corrosion science and prediction’: part 4	1
Effect of buffer chemistries on the electrochemical corrosion behaviour of three metallic materials	1
Crevice corrosion behaviour and mechanism of laser additive manufacturing nickel-based alloy by using wire beam electrode	1
Corrosion deposition in deforming anodes of in-ground cathodic protection systems: A three-dimensional transient study	1
Corrosion behaviour of FeCoNiCrAl high-entropy alloy in molten NaCl–KCl–MgCl₂ chloride salt	1
In situ quantitative topographic measurement and corrosion behaviour of low carbon steel in chloride solutions	1
Evaluation of corrosion behaviour of turmeric-coated AZ51 alloy in simulated body fluid for biomedical applications	1
Corrosion behaviour of the 2098-T351 Al–Cu–Li alloy after different surface treatments	1
Effect of regularly arranged reduced graphene oxide on the anti-corrosion performance of waterborne silicate zinc-rich coatings	1
Assessing coating integrity and cathodic protection on buried pipelines under horizontal directional drilling conditions	1
Computational modelling and correlation of physical parameters of 1-heptatriacotanol, phytol and 3, 7, 11, 15-tetra methyl-2-hexadecen-1-ol with the corrosion inhibition efficiency of CIW for mild ste	1
High-temperature electrochemical corrosion evaluation of 2.25Cr–1Mo alloy in eutectic LiCl–KCl molten salt	1