International Journal of Nanotechnology

Papers
(The TQCC of International Journal of Nanotechnology is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-02-01 to 2025-02-01.)
ArticleCitations
Temperature and enthalpy of fusion calibration of Calvet calorimeter from -150°C to 156°C9
Experimental investigation on the thermophysical properties and heat storage/retrieval studies of [HMIM]<SUP align="right">+</SUP> cation-based ionic liquids for energy storage application7
A dynamic programming approach for accurate content-based retrieval of ordinary and nano-scale medical images5
The combined study of improved fuzzy optimisation techniques with the analysis of the upgraded facility location centre for the Covid-19 vaccine by fuzzy clustering algorithms4
Unsupervised voice activity detection with improved signal-to-noise ratio in noisy environment4
Clinical value of injected calcium phosphate cement/recombined bone xenograft-based hybrid nano-biomaterials in the knee joint sports rehabilitation ability3
In-situ turbidity sensor system for residential water quality monitoring3
Effect of sodium hyaluronate-based nanoprobe in rehabilitation of tendon injury and tendon adhesion3
Effect of precipitation of silicone oil-based nanofluid on thermal conductivity3
Research on gene therapy of neurons based on narcotic nanoparticles intervention in cerebral ischemia2
Sleep stage based sleep disorder detection using single-channel electroencephalogram2
A dynamic programming approach for accurate content-based retrieval of ordinary and nano-scale medical images2
Effect of surfactants on mechanical and environmental geotechnical properties of loess and bentonite2
Nano-targeted drugs in combined treatment and nursing of liver cancer2
Groundwater quality index and human health risk assessment of heavy metals in and around Asansol Industrial Area, West Bengal, India2
Smart approach in impact of cumin powder on obesity among adults in urban area of Puducherry, India2
Small cell lung tumour differentiation using F-18 (Fluorine-18) PET and smoothing using Gaussian 3D convolution operator2
Effect observation and nursing of nanosilver antibacterial dressing in preventing catheter-related bloodstream infection2
Protective effect of nano-electrostatic composite material on miners' skin and its influence on working state2
Analysis of high dimensional data using feature selection models2
Al<SUB align="right">2O<SUB align="right">3 nanoparticles synthesis, and a study of its influence on the fire behaviour of nanocomposite materials based on unsaturated polyester resin2
Application of nanomaterials in martial arts sports injury patients1
Numerical study on the optimisation of AlGaN-based deep ultra-violet light emitting diodes single quantum wells1
Effects of spray pressure, distance, angle and equivalent orifice diameter on spray uniformity for nano-pesticide application1
Synthesis of nanopowders Nd<SUB align="right">2Fe<SUB align="right">14B by chemical method1
Research on application of new nanomaterials in repairing ligament injury of Wushu athletes1
Study on the effect of carrier-free dual-drug nanocrystals against colon cancer cells1
Predictive protein module based on PPI network and double clustering algorithm1
Synthesis, morphology and optical characterisation of transition metal oxide (Mn<SUB align="right">3O<SUB align="right">4) nanostructures and its antibacterial activities1
The combined study of improved fuzzy optimisation techniques with the analysis of the upgraded facility location centre for the Covid-19 vaccine by fuzzy clustering algorithms1
Lightweight and secure IoMT edge device architecture through computing base minimisation and computing process optimisation1
Influence of gas flow rate on the thermal performance of AlNB alloy as a solid thermal interface material for thermal management applications (heat spreading)1
Multi to binary class size based imbalance handling technique in wireless sensor networks1
Analysis of the influence of physical training on skeletal structure based on biomechanical analysis1
Energy band gap investigation of Al nanoparticles/polystyrene nanocomposite foils1
Neurotrophic factors combined with ordered collagen nano-modified materials in the recovery of exercise ability of patients with peripheral nerve transection1
Application of micro and nano bubble technology in water level recovery of water conservancy construction engineering1
Nano-targeted drugs in combined treatment and nursing of liver cancer1
Encapsulation of Ag nanoparticle-carbon composite and enhancement of visible light ZnO nanorods photodiode1
Influence of potassium hydroxide molarity and etching time on etching of Al-rich aluminium gallium nitride layer1
Study on the effect of carrier-free dual-drug nanocrystals against colon cancer cells1
Analysis on measurement of hydrogen concentration in air mixture using 3 omega method1
The effect of the moisture state of samples on the change in the elastic-strength parameters of epoxy polymers during natural climatic ageing1
Inhomogeneity of InGaN/GaN MQWs in InGaN based blue LED by atom probe tomography and secondary ion mass spectrometry1
Experimental and theoretical validation studies of ASnO<SUB align="right">3 (A = Ba, Ca, Sr) nanofibres for bioactivity applications1
Application analysis of green building materials in urban three-dimensional landscape design1
Image-based automatic segmentation of leaf using clustering algorithm1
Analysis on the influence of nanotechnology development on sports health industry1
Graphene oxide nanomaterials in the recovery of shoulder joint movement contraction1
Effect of thermal contact resistance on heat generation in conduction-cooled binary current lead1
Synthesis of zinc oxide nanotwins using electrochemical deposition technique at different current densities1
A novel SVM and LOF-based outlier detection routing algorithm for improving the stability period and overall network lifetime of WSN1
Application of energy saving and environmental protection material in landscape construction of urban landscape wetland system1
Thermophysical properties of Ni-based Waspaloy alloy changed with tungsten, titanium and aluminium1
Investigation on facile synthesis of YAG:Ce nanoceramic powder prepared by microwave solution combustion and its application in white light emission1
A comparison study of ZnO, InZnO, GaZnO and InGaZnO physical properties and optical bandgap0
Research on optimisation strategy of athletes' training mental fatigue based on nano biomechanical data fusion analysis0
Intelligent overlay algorithm for medical data management based on wireless communication technology and feature fusion0
Cytological mechanism of nanowire reinforced biological bone cement in the treatment of vertebral osteoporotic fractures0
Analysis and research on regeneration therapy of athlete tendon injury based on nanometre sensor technology0
Synthesis and characterisation of TiO<SUB align="right">2 nanoparticles using alkaline fusion method for potential photocatalyst application0
Study on the optical characteristics according to the anion and cation in the ionic liquid and MWCNT ionanofluid0
Network security analysis on diseases reporting at wireless sensor network0
Optimisation of extrinsic base doping of a SiGe heterojunction bipolar transistor integrated in a BiCMOS 55 nm technology for high frequency performances0
Analysis on the influence of nanotechnology development on sports health industry0
New nanoparticle computed tomography contrast agent in the treatment of neonatal hypoxic-ischemic encephalopathy0
Research and development of nano-lipid functional food and its impact on sports and health industry0
Studies on Ga<SUB align="right">2O<SUB align="right">3 thin films subjected to post-deposition annealing in argon ambient0
Gas chromatography-mass spectrometry determination of polycyclic aromatic hydrocarbons in oil fried quail meat vs. rabbit meat0
High-sensitivity room temperature p-doped and undoped GaN thin film resistive gas sensor0
Effect of nucleation time on GaN layer grown on different shapes of patterned sapphire substrate0
Electrospinning nanofibres in the exercise rehabilitation after fracture of anterior cruciate ligament0
Nanomaterials in diagnosis and treatment of cardiovascular diseases0
Simulation study on changes of EMG and physiological parameters of athletes under training state based on nano biomechanics analysis0
Remote IoT correspondence for coordinating end-devices over MANET via energy-efficient LPWAN0
Influence of gold nanoclusters biomaterials combined with upper limb rehabilitation robot on patients with limb ischemic injury0
Analysis of the effect of modern biotechnology and nanotechnology on competitive sports0
Research on the relevant effects of Taijiquan exercise on the changes of lower limb muscle strength in the elderly based on nano biometric IC technology0
Graphene oxide nanomaterials in the recovery of shoulder joint movement contraction0
Research on intelligent city traffic management system based on WEBGIS0
Modelling and analysis of fatigue physiological parameters of all tissues of football athletes under cervical vertebral stress based on biomechanical analysis0
Effects of post-annealing on GaN thin films growth using RF magnetron sputtering0
Annealing effects on post-deposition β-Ga<SUB align="right">2O<SUB align="right">3 thin film prepared through radiofrequency magnetron sputtering0
Comparison of electrical properties between graphite and carbon nanotube as interdigitated electrode in TiO<SUB align="right">2/MWCNT thick film0
Synthesis, morphology and optical characterization of transition metal Oxide (Mn3O4) nanostructures and its antibacterial activities0
Influence of convective heat transfer on the AC temperature amplitude of a microheater on glass or polyimide substrate0
Effect of surfactants on mechanical and environmental geotechnical properties of loess and bentonite0
Gas chromatography-mass spectrometry determination of polycyclic aromatic hydrocarbons in oil fried quail meat vs. rabbit meat0
Assessment of different organic coatings on magnetic nanoparticles for biomedical applications0
The effect of varying oxidising conditions for transformation of metallic cerium to cerium oxide films0
Adoption of three-resonant terahertz nano-biosensor in human sports health monitoring0
A novel SVM and LOF-based outlier detection routing algorithm for improving the stability period and overall network lifetime of WSN0
Detection and classification of brain abnormality by a novel hybrid EfficientNet-deep autoencoder (EF-DA) CNN model from MRI brain images in smart health diagnosis0
Analysis of resting state functional magnetic resonance images for evaluating the changes in brain function depression0
Photoelectrochemical activity of magnetron sputtered ZnO thin films: role of thermal annealing0
A low power transistor level FIR filter implementation using CMOS 45 nm technology0
Optimising pharmacokinetics via ADMET, bioactivity of Zr substituted samarium-doped ceria nanomaterials0
Modelling and analysis of fatigue physiological parameters of all tissues of football athletes under cervical vertebral stress based on biomechanical analysis0
Experimental analysis of boost converter performance with nonideals for sustainable energy applications0
Visible property enhancement techniques of IoT cameras using machine learning techniques0
Visible property enhancement techniques of IoT cameras using machine learning techniques0
Planar nanostructures element analysis using the X-ray radiation emission induced by high energy excitation0
Application value of new nano-drug carrier in biphasic 3D-pCASL in the evaluation of cerebral perfusion blood flow in symptomatic and asymptomatic unilateral middle cerebral artery subtotal occlusion0
Nanostructured zinc oxide growth on nickel and palladium seed layer using laser-assisted chemical bath deposition0
Improved generalised fuzzy peer group with modified trilateral filter to remove mixed impulse and adaptive white Gaussian noise from colour images0
Studying the impact of anti-oxidant extract of different vegetables on the formation of PAHs in rabbit meat0
Optimisation of cache replacement policy using extreme learning machine0
Research on application of new nanomaterials in repairing ligament injury of Wushu athletes0
Effects of post-deposition annealing in oxygen ambient of RF magnetron sputtered Ga<SUB align="right">2O<SUB align="right">3 thin film0
Application value of new nano-drug carrier in biphasic 3D-pCASL in the evaluation of cerebral perfusion blood flow in symptomatic and asymptomatic unilateral middle cerebral artery subtotal occlusion0
Comparative approach for discovery of cancerous skin using deep structured learning0
Image-based automatic segmentation of leaf using clustering algorithm0
Optimising pharmacokinetics via ADMET, bioactivity of Zr substituted samarium-doped ceria nanomaterials0
Investigation into poly (9,9-di-n-octylfluorenyl-2,7-diyl) (PFO) coated zinc oxide nanorods on ITO substrates0
Study on vitro transdermal administration of surface anaesthetics based on dextran-based nano-injection lipid lidocaine0
Bioanalytical method development and validation of a novel antiseizure agent Canobamate, using LC-MS/MS0
Dimension adaptive hybrid recovery with collaborative group sparse representation based compressive sensing for colour images0
Neurotrophic factors combined with ordered collagen nano-modified materials in the recovery of exercise ability of patients with peripheral nerve transection0
Unsupervised voice activity detection with improved signal-to-noise ratio in noisy environment0
Influence of gold nanoclusters biomaterials combined with upper limb rehabilitation robot on patients with limb ischemic injury0
Study on preparation and technology of nanoporous platinum based metal materials by dealloying method0
Detection of brain tumour using machine learning based framework by classifying MRI images0
Groundwater quality index and human health risk assessment of heavy metals in and around Asansol industrial area, West Bengal, India0
Application of bio-scaffold materials in the recovery of sports health of injured parts of fracture patients0
Evaluation method for colour matching using artificial intelligence technology0
Wireless sensing for monitoring nuclear power equipment0
Simulation study on changes of EMG and physiological parameters of athletes under training state based on nano biomechanics analysis0
Effect observation and nursing of nanosilver antibacterial dressing in preventing catheter-related bloodstream infection0
Annealing effects on post-deposition -Ga2O3 thin film prepared through radio frequency magnetron sputtering0
Evaluation method for colour matching using artificial intelligence technology0
Structural and antimicrobial evaluation of gamma synthesised silver kaolinite nanoparticles0
Research progress of adoption of hyperbranched polymer nano materials in textile industry0
An improved model for unsupervised voice activity detection0
Adoption of three-resonant terahertz nano-biosensor in human sports health monitoring0
Effects of post-deposition annealing in argon-oxygen-argon ambient on physical and electrical characteristics of thulium oxide passivation layer on silicon substrate0
Thermal contact resistance measurement between EXG and polyimide substrates under varying pressure and thermal interfacial material0
A novel and intelligent decision-making system for real-time healthcare tracking using commercial wearable data0
Characteristics of titanium dioxide nanotubes annealed under various conditions and quenched using liquid nitrogen0
Modelling and simulation analysis of training effect and electromyogram change of track and field athletes based on biomechanics0
Preparation of nano biosensors for detection of intestinal flora and cellulose molecular weight0
Characteristic analysis of discontinuous function modelling-based nano-biosensor and its detection for hyaluronidase0
COVID-19 detection and tracking using smart applications with artificial intelligence0
Temperature and enthalpy of fusion calibration of Calvet calorimeter from -150C to 156C0
ZnO nanostructures assisted growth using different NH<SUB align="right">4F concentrations for photovoltaic applications0
New nanoparticle computed tomography contrast agent in the treatment of neonatal hypoxic-ischemic encephalopathy0
Preparation of reduced graphene oxide/nano hydroxyapatite nanocomposite scaffold and its adoption in sports fracture injury0
Application analysis of green building materials in urban three-dimensional landscape design0
Experimental analysis of boost converter performance with nonideals for sustainable energy applications0
Measurement of thermal diffusivity of gold nanofluid according to particle size and temperature0
Stereoscopic display of architectural design images based on virtual reality technology0
A summary of feature selection techniques for gene chip in bioinformatics based on RSA algorithm0
Adoption of porous nanocomposite fibre scaffold in cartilage injury healing and rehabilitation0
Study on preparation and technology of nanoporous platinum based metal materials by dealloying method0
Credence-Net: a semi-supervised deep learning approach for medical images0
Real time crop field monitoring system using agriculture IoT systems0
Effects of annealing conditions on sol-gel dip coated <i>β</i>-Ga<SUB align="right">2O<SUB align="right">3 thin films0
Effect of post-deposition annealing on CeO<SUB align="right">2 passivation layer spin coated on silicon substrate in nitrogen ambience0
Electrospinning nanofibres in the exercise rehabilitation after fracture of anterior cruciate ligament0
Effect of copper nanoparticles on growth parameters of maize seedlings0
A novel hybrid model for automatic diabetic retinopathy grading and multi-lesion recognition method based on SRCNN & YOLOv30
Implementation of intrusion detection system and improvement utilising genetic algorithm0
Characteristics of TiO<SUB align="right">2-Cu thin films deposited using electrospray technique0
Design of IoT aided prevention and control platform for major public health emergencies0
Research on promoting the development of circular economy by using nano-biopharmaceutical technology0
Optimisation of cache replacement policy using extreme learning machine0
Analysis of resting state functional magnetic resonance images for evaluating the changes in brain function depression0
Analysing behavioural and academic attributes of students using educational data mining0
Wearable IoT enabled smart heart disease monitoring on WSN0
Network security analysis on diseases reporting at wireless sensor network0
Study of glaring effect from light emitting diodes via lens approach0
Properties of the nanoemulsions with seed oils0
The second quantum revolution: the development of quantum subatomic nanotechnologies0
Dimension adaptive hybrid recovery with collaborative group sparse representation based compressive sensing for colour images0
Characteristics of InGaN/AlN heterostructure grown by using MOCVD technique0
Smart approach in impact of cumin powder on obesity among adults in urban area of Puducherry, India0
Lightweight and secure IoMT edge device architecture through computing base minimisation and computing process optimisation0
Effects of various solvent in retrieving nacre layers from <i>Modiolus philippinarum</i> shells for potential tissue engineering applications0
Nanomaterials in diagnosis and treatment of cardiovascular diseases0
Application of micro nano bubble technology in water level recovery of water conservancy construction engineering0
Deep learning-based feature extraction coupled with multi class SVM for COVID-19 detection in the IoT era0
Tuneable poly(N-isopropyl acrylamide)-based thermo-responsive nanogels: a review on polymerisation method0
Characteristic analysis of discontinuous function modelling-based nano-biosensor and its detection for hyaluronidase0
A novel hybrid model for automatic diabetic retinopathy grading and multi-lesion recognition method based on SRCNN & YOLOv30
Cytological mechanism of nanowire reinforced biological bone cement in the treatment of vertebral osteoporotic fractures0
Research and development of nano-lipid functional food and its impact on sports and health industry0
Research on the application of new nanomaterial γ-Al<SUB align="right">2O<SUB align="right">3 in industrial product modelling design0
Simulation analysis of sports training process optimisation based on motion biomechanical analysis0
Research on intelligent city traffic management system based on WEBGIS0
A hybrid WSN based two-stage model for data collection and forecasting water consumption in metropolitan areas0
Adoption of porous nanocomposite fibre scaffold in cartilage injury healing and rehabilitation0
Modelling and simulation analysis of training effect and electromyogram change of track and field athletes based on biomechanics0
Small cell lung tumour differentiation using F-18 (Fluorine-18) PET and smoothing using Gaussian 3D convolution operator0
Preparation of nano biosensors for detection of intestinal flora and cellulose molecular weight0
Polyacrylic acid coated nanomaterials and sports rehabilitation training on the therapeutic effect of patients with stroke0
Stereoscopic display of architectural design images based on virtual reality technology0
Magnetic characteristics adjustment through rare-earth lanthanum substitution in mechanically alloyed yttrium iron garnet nanoparticles0
Research on optimisation strategy of athletes' training mental fatigue based on nano biomechanical data fusion analysis0
An improved model for unsupervised voice activity detection0
Research progress of adoption of hyperbranched polymer nano materials in textile industry0
A summary of feature selection techniques for gene chip in bioinformatics based on RSA algorithm0
Analysis of the effect of modern biotechnology and nanotechnology on competitive sports0
Investigation on polyaniline synthesised by camphor sulphonic acid; optical, thermal, structural, and electrical properties0
Fishier mantis optimiser: a swarm intelligence algorithm for clustering images of COVID-19 pandemic0
Growth, characterisation and thermal stability of AlN/Ti/AlN/SiO<SUB align="right">2 multilayer selective solar absorber coating for high temperature applications0
Chromaticity study of La<SUB align="right">2O<SUB align="right">3-PVA nanofibres prepared by electrospinning process for UV light down conversion for white light emitting diode0
Research on the relevant effects of Taijiquan exercise on the changes of lower limb muscle strength in the elderly based on nano biometric IC technology0
Adoption of carbon nanomaterial-based flexible sensors in human exercise health monitoring0
Diagnosing cardiovascular disease via intelligence in healthcare multimedia: a novel approach0
Effects of spray pressure, distance, angle and equivalent orifice diameter on spray uniformity for nano-pesticide application0
A novel and intelligent decision-making system for real-time healthcare tracking using commercial wearable data0
X-ray diffraction analysis of gallium oxide thin films synthesised by a simple and cost-effective method0
Study on vitro transdermal administration of surface anaesthetics based on dextran-based nano-injection lipid lidocaine0
Research on the application of new nanomaterial γ-Al<SUB align="right">2O<SUB align="right">3 in industrial product modelling design0
Diagnosing cardiovascular disease via intelligence in healthcare multimedia: a novel approach0
Application of micro nano bubble technology in water level recovery of water conservancy construction engineering0
Detection and classification of brain abnormality by a novel hybrid EfficientNet-deep autoencoder (EF-DA) CNN model from MRI brain images in smart health diagnosis0
Wearable IoT enabled smart heart disease monitoring on WSN0
Effect of copper nanoparticles on growth parameters of maize seedlings0
Antibacterial properties of PCL/silver NPs based nanocomposites for potential food packaging applications0
Fabrication of ultraviolet photodetector using Au nanoparticles decorated ZnO NRs/GaN0
Integrated agriculture IoT based farm monitoring and management systems0
Impedance spectroscopy analysis of Al/100-plane AlN/p-Si MIS prepared by HiPIMS method for tailoring dielectric properties0
Integrated agriculture IoT based farm monitoring and management systems0
Influence of growth temperature of p-GaN layer on the characteristics of InGaN/GaN blue light emitting diodes0
Laser synthesis route for production of GaN nanocrystals for optical sensor protection0
Analysis of high dimensional data using feature selection models0
Analysis and research on regeneration therapy of athlete tendon injury based on nanometre sensor technology0
Deep learning techniques in CT image reconstruction and segmentation: a systematic literature review0
Effects of dry oxidation treatments on the characteristics of gallium oxide thin films prepared using sol-gel spin coating method0
Behavioural programs can function as biological genes participating in the social evolution0
Adoption of carbon nanomaterial-based flexible sensors in human exercise health monitoring0
Image feature extraction algorithm based on parameter adaptive initialisation of CNN and LSTM0
Design of IoT aided prevention and control platform for major public health emergencies0
Multi to binary class size based imbalance handling technique in wireless sensor networks0
Power optimisation of wireless sensing network through quantum deep learning0
Application of energy saving and environmental protection material in landscape construction of urban landscape wetland system0
Intelligent overlay algorithm for medical data management based on wireless communication technology and feature fusion0
Analysis on the performance of normalised gain difference power allocation for MIMO-NOMA-based VLC0
Computer simulation of the neutralisation of superoxide radicals by the fullerenol-24 nanomolecular system0
Effect of GaN cap layer towards ohmic contact of open-gate Cr AlGaN/GaN high electron mobility transistor0
Research on promoting the development of circular economy by using nano-biopharmaceutical technology0
Analysis of the influence of the traps on the AlGaN/GaN MOSHEMT characteristics for low leakage power devices0
Analysis of the influence of physical training on skeletal structure based on biomechanical analysis0
Evaluation on the photothermal conversion performance of SiC nanofluid for a direct absorption solar collector0
Effect of sodium hyaluronate-based nanoprobe in rehabilitation of tendon injury and tendon adhesion0
Bioanalytical method development and validation of a novel antiseizure agent Cenobamate using LC-MS/MS0
Experimental and theoretical validation studies of ASnO<SUB align="right">3 (A = Ba, Ca, Sr) nanofibres for bioactivity applications0
Remote IoT correspondence for coordinating end-devices over MANET via energy-efficient LPWAN0
Nano-drug release control microchip combined with biomaterials in the recovery of shoulder joint movement and contraction0
Application of nanomaterials in martial arts sports injury patients0
0.19470405578613