Road Materials and Pavement Design

Papers
(The TQCC of Road Materials and Pavement Design is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-02-01 to 2025-02-01.)
ArticleCitations
Prediction of stiffness modulus of bituminous mixtures using the applications of multi-expression programming and gene expression programming51
Interlaminar stability analysis and evaluation of the asphalt pavement with heating cables based on shear fatigue test40
Evaluation of joint activation and joint spacing in concrete overlays38
Thematic issue: asphalt pavement & environment37
Use of calcium-rich wood biomass combustion ashes as filler in hot mix asphalt35
Assessing the efficacy of alginate-encapsulated rejuvenators from soybean oil sludge and fatty acid for enhanced self-healing capacity of asphalt mixtures35
Advanced characterisation of multi-recycled warm asphalt pavement (MRWAP) with high content of recycled asphalt pavement34
An alternative method for determination of compaction level for the pavement granular layers33
Effect of variability in waste cooking oil on rejuvenation of asphalt31
Performance evaluation of marginal materials in geosynthetic reinforced base layers29
Numerical determination of pavement mean texture depths at different degrees of traffic polishing-induced wear28
Design and experiment of KH550 modified high transparency clear asphalt and light colored asphalt pavement26
Toll concessions: management strategy and deflection performance of the N3TC network in South Africa26
Rheological, permanent deformation and fatigue analysis for calibration of the recovery process of bitumens in the rotary evaporator25
Evaluation of the influence of warm additives modified by Vestenamer polymer on the performance of stone matrix asphalt containing crumb rubber25
Implementation considerations of Balanced Mix Design in practice: recent experience in Vermont25
Appraising bitumen coverage, workability, and production temperatures of warm asphalt-aggregate blends23
Study on properties of self-lighting cement pavement material22
Alternative bio-based emulsifiers for road materials22
Heterogeneous numerical length scale investigation on fatigue behaviour of bituminous composites: focusing on mastic scale22
Dynamic pavement response analysis under wide-base tyre considering vehicle-tyre–pavement interaction21
Improving storage stability and rheological performance of asphalt rubber modified with nanosilica and Sasobit20
Applicability of various mixing rules for hot asphalt recycled binders19
Evaluation of the rejuvenating effect of different additives on bituminous mixtures including hot-recycled RA as a function of the production temperature19
Laboratory fatigue performance of the cement-stabilised loess fabricated using different compaction methods18
Review of methodology for life cycle assessment and life cycle cost analysis of asphalt pavements18
Development of prediction models for interlayer shear strength in asphalt pavement using machine learning and SHAP techniques18
Functional and field performance of epoxy asphalt technology – state-of-the-art18
Evaluation of drastic temperature change on temperature stress of asphalt mixture during microwave deicing18
Evaluation and modelling of low-temperature fracture properties of asphalt binders in thin film by means of the local fracture test17
HPASC – OPCC bi-surface shear strength prediction model using deep learning17
Influence of bitumen emulsion on the curing behaviour of standardised cold bitumen emulsion mortars16
Study on the rheological behaviour of UHPC considering the combination of temperature and mineral admixture16
Critical dynamic stress for the frozen subgrade soil15
Rheological multi-scale evaluation of RAP and RAS binders mobilisation in hot mix asphalt15
Mechanical recovery of lime-stabilised clays subjected to freeze–thaw damage14
Towards a unified performance based characterisation of bitumen and mastic using the DSR14
Sustainable activator: the usability of anodizing cleaning solution for the synthesis of alkali-activated soil-fly ash14
Key pavement condition indicators for assessing highway pavement maintenance quality index14
Extraction of asphalt mastic from mixture without chemical agent14
Climate change impacts on flexible pavement design and rehabilitation practices13
Effects of temperature on the dynamic response of airfield runway subgrade in cold regions13
Expansion process of foamed bitumen considering surface energy13
Water accumulation and anti-sliding decay characteristics of freeway pavement at superelevation transitions13
Reversible molecular structuring and thixotropy in bitumen13
Reconciling the structural design of bitumen stabilised materials – heuristic versus mechanistic empirical models13
Research on probability index of road driving comfort based on driving vibration distribution12
Spray water cooling of newly laid asphalt pavement for rapid opening to traffic12
Effect of filler properties on the hydrothermal ageing of bituminous mastics12
Study on interface shear characteristics of PVA-ECC composite steel bridge deck12
Time-domain elasto-dynamic model of a transversely isotropic, layered road structure system with rigid substratum under a FWD load12
Microstructural behaviour of quarry fines stabilised with fly ash-based binder12
Structural condition assessment of asphalt pavement semi-Rigid bases using FWD deflection basin parameters11
Cracking performance evaluation and modelling of RAP mixtures containing different recycled materials using deep neural network model11
Unconfined compressive strength prediction of recycled cement-treated base mixes using soft computing techniques11
Assessment of aging behaviour of reclaimed asphalt binders: multi-scale mechanical and microstructural characterisation11
Influence of crosslinking effect on chemical and rheological properties of aged liquid bio-rubber composite SBS modified asphalt11
Effect of freeze–thaw and wetting–drying cycles on the CBR, shear strength, stiffness and permanent deformation of crushed waste rocks11
Evaluating the impact of overweight trucks on rigid pavement performance using AASHTOWare pavement ME design11
Effect of aluminum hydroxide (ATH) on flame retardancy and smoke suppression properties of SBS-modified asphalt11
Mechanism-based evaluation of compactability of asphalt mixtures11
Characterization of aggregate interlocking in hot mix asphalt by mechanistic performance tests11
Experimental study and cost–benefit analysis of using polymer-modified binders for low-traffic roads in Minnesota11
Influence of ageing and moisture conditions on the ravelling resistance of the micro-surfacing mix11
Effect of lime and cement fillers on moisture susceptibility of cold mix asphalt10
State of art review on the incorporation of fibres in asphalt pavements10
Investigating the use of zinc production wastes as filler in asphalt mixtures10
A comparative study on the performance of field-sampled asphalt mixtures for heavy-duty pavements using laboratory testing and mechanistic-empirical simulations10
Effect of different adding methods of Nano-TiO 2 to micro-surfacing layer on NO x degradation10
Potential applications of connected vehicles in pavement condition evaluation: a brief review10
Analytical modelling of complex stiffness modulus tests in direct tension-compression on asphalt concrete and nonlinearity effect due to strain amplitude9
Evaluating the fracture behaviour of modified asphalt concrete composites (ACC) at low and intermediate temperatures using edge notched disc bend (ENDB) specimen9
New binary paper/wood industry waste blend for solidification/stabilisation of problematic soil subgrade: macro-micro study9
A new proposal to assess shear fatigue resistance of asphalt pavement interfaces9
Investigating the rheological behaviour of styrene–butadiene–styrene modified asphalt9
Rational relationship between the fatigue curves of asphalt mixes obtained from tension/compression and 4-point bending tests9
Performance of modified bituminous binders for mastic asphalt applications: risk assessment by thermal and rheological indices9
Atomic insight into the nano-cracking behaviour of bitumen: considering oxidative aging effects9
Optimising pavement texture measurement resolution for accurate friction determination: a preliminary investigation9
Cement-treated crushed stones: influence of cement type on mixture porosity9
Investigating the effects of ensemble and weight optimization approaches on neural networks’ performance to estimate the dynamic modulus of asphalt concrete9
Urban mining for low-noise urban roads towards more sustainability in the urban environment9
Effect of high-density-polyethylene (HDPE) and waste tire rubber (WTR) on laboratory performance of styrene butadiene styrene (SBS) modified asphalt9
Intermediate- and high-temperature damage of bitumen modified by HDPE from various sources9
Study on low-temperature performance of bitumen, mastic, and asphalt mixture9
Compaction methods of cold recycled asphalt mixtures and their effects on pavement analysis8
Evaluation on the use of COVID-19 single-use face masks to improve the properties of hot mix asphalt8
Impact of lateral load transfer in heavy road vehicles at horizontal curves on the distress of asphalt pavements8
Methods to evaluate intermediate temperature properties of asphalt mixtures by the semi-circular bending (SCB) test8
Performance evaluation of recycled concrete aggregates with geosynthetics as an alternative subbase course material in pavement construction8
Predicting bearing capacity and trafficability classes of forest roads using road properties and surrounding terrain information8
Freeze–thaw resistance of pervious concrete produced with different aggregates and fibres8
Dynamic modulus and damping ratio of compacted loess under long-term traffic loading8
Effect of geopolymer as an additive on the mechanical performance of asphalt8
A comprehensive review of warm-mix asphalt mixtures: mix design, construction temperatures determination, performance and life-cycle assessment8
Laboratory investigation of graphene modified asphalt efficacy to pavement performance8
Enhancing performance and fuel resistance of modified epoxy asphalt using amine and carboxyl terminated PET co-hardener8
Low-temperature flexural tensile performance degradation of asphalt mixture under coupled UV radiation and freeze-thaw cycles8
Suitability of warm mix asphalt (WMA) technologies based on performance and energy consumption8
Modelling of the fatigue cracking resistance of grid reinforced asphalt concrete by coupling fast BEM and FEM8
Comparison of gravimetric methods to measure regional porosity distribution in porous concrete pavement8
Correlations among physical properties of pervious concrete with different aggregate sizes and mix proportions8
Impact of solar exposure on chemical and rheological properties of hybrid polymer modified bitumen with recycled plastics8
Environmental potentials of asphalt mixtures fabricated with red mud and fly ash7
Damage investigation of thin flexible pavements to Longer Heavier Vehicle loading through instrumented road sections and numerical calculations7
Parametric study to investigate the deflection and stress behaviour of Interlocking Concrete Block Pavement7
Effects of lead time and manufacturing methods applied for polymer-modified bitumen emulsion (PMBE) on microsurfacing performance7
Improving the accuracy of mineral aggregate surface energy estimation based on goniometry7
Influence of alternative rice husk ash filler on bitumen emulsion-based recycled asphalt7
Mechanism and structure of micro-nanofluid directional heat conduction in asphalt pavement in plateau permafrost regions7
Effect of superficially modified zinc oxide nanoparticles as an additive on the rheological performance of asphalt binder7
Desulphurisation of waste rubber powder using mechanochemical method and the influence on modified asphalt7
Ultrasonic characterisation of the elastic properties of mineral aggregates used in asphalt mixtures7
Effective volume filling ratio of siliceous fillers within bituminous composites: experimental and micromechanical modelling7
Bitumen and mastic local rupture test modelling with DEM7
Direct use of RAPM in laboratory study on diffusion between asphalt binders7
Effect of bottleneck-causing clogging on infiltration-runoff of pervious concrete pavement system7
3D Reconstruction and morphology analysis of coarse aggregate using optical laser triangulation and image processing technology7
Durability of GGBS based alkali-activated binder treated peat through wetting-drying cycle7
Effects of aggregate shape on the macrotexture and performance of chip seal: a laboratory study7
Experimental and numerical investigation on the rheological behaviour of bituminous composites via DSR testing7
A review of steel slag as a substitute for natural aggregate applied to cement concrete6
Counting of exposed aggregate number on pavement surface based on computer vision technique6
Laboratory study and performance evaluation of cement treated base using chemical stabiliser6
Mechanistic approach to predict service life of flexible pavements subjected to heavy traffic loads6
Evaluating the use of machine learning for moisture content prediction in base and subgrade layers6
Pavement subgrade stabilisation using refractory castables: minimisation of layer thickness6
A novel approach for automatic asphalt pavement crack length estimation6
Feasibility of handheld X-ray fluorescence analyser for predicting aggregate frictional resistance using elemental composition6
Evaluation of hydroplaning potential using Mobile Lidar measurements for network-level pavement management applications6
Influence of confining pressure on rubberised cement bound aggregate behaviour during static triaxial test6
Chemical, mineralogical, microstructural and engineering properties of tropical soils stabilised with the combined and individual use of different types of steel slag6
Asphaltene agglomeration through physical-chemical and rheological testing6
Laboratory and field performances of grave emulsion manufactured using nanocellulose crystals as an asphalt-emulsion emulsifier6
Prediction of manhole-cover skid-resistance performance using decision trees and regression analysis6
The effect of specimen size on the unconfined compressive strength of cement-stabilized granular mixtures made of natural and recycled aggregates6
Additives optimisation for expansive soil subgrade improvement based on rough set theory6
Conversions of viscoelastic deflections of asphalt pavement under TSD load to elastic ones for pavement condition assessments6
Modelling the response of large-size subbase materials tested under varying moisture conditions in a heavy vehicle simulator6
Mechanical strength of an hot-mix asphalt using recycled concrete aggregate: mass and volume proportioning6
Sample preparation techniques on dynamic shear rheometer testing: round robin tests on bitumen6
Rheological properties, 2S2P1D modelling and SHStS transformation of 12 Brazilian bitumens and mixtures6
Optimisation of gradation based on fractal dimension for large-size graded crushed stone5
What is known and unknown concerning microplastics from tyre wear?5
Use of Hansen Solubility Parameters (HSP) in the selection of highly effective rejuvenators for aged bitumen5
Comparative investigation of different blends ageing behaviours for short-term thermal oxidation ageing mechanism of SBS-modified bitumen5
Impact of autonomous truck implementation: rutting and highway safety perspectives5
Effect of principal stress rotation on deformation behavior of dense sand–clay mixtures5
Optimisation of the preparation procedure of crumb rubber modified bitumen with wax-based additives5
Image-based gradation and aggregate characterisation: case of cement-stabilised quarry fines5
Application of textile fibres from tire recycling in asphalt mixtures5
Variation of oxidation reactivity of straight run and H-Oil hydrocracked vacuum residual oils in the process of road asphalt production5
Automatic detection of loose gravel condition using acoustic observations5
Suction stress effects on stress-dependent resilient modulus of subgrade soils5
Modelling the permanent deformation of unbound granular materials in pavements5
Preparation of low-cost reactive powder concrete using waste steel fibres recycled from scrap tires5
Pavement temperature model for Canadian Asphalt Binder selection: Introduction to the CPT model5
Pyrolytic oil from waste tyres as a promising encapsulated rejuvenator for the extrinsic self-healing of bituminous materials5
Viennese Ageing Procedure (VAPro): adaptions and further development to address low-temperature performance of aged asphalt mixtures5
Mechanical performance of asphalt base layers with high RAP content and recycling agents5
PaveSAM – segment anything for pavement distress5
Effect of self-cementing properties on the resilient behaviour of recycled concrete aggregates used in base and subbase5
Application of recycled lignin powder as a sustainable additive for soil improvement against water resistance5
Thermoreversible aging in asphalt binders5
An alternative approach for characterization of the linear viscoelastic behavior of asphalt binders5
Asphalt binder selection for future Canadian climatic conditions using various pavement temperature prediction models5
Exploring the impact of humidity and water on bituminous binder aging: a multivariate analysis approach (TI CAB)5
Interface contact properties in asphalt pavement using 3D laser scanning technology5
Experimental research on applicability of weathered red sandstone soil to roadbed filling5
The role of tricalcium aluminate and gypsum dehydration level in cement for effective air entrainment of concrete5
Behaviour of binder blends: experimental results and modelling from LVE properties of pure binder, RAP binder and rejuvenator5
Optimising waste cooking oil as rejuvenator for recycled mixtures: a laboratory-based approach5
How does the isophthalic unsaturated polyester affect the dielectric properties, the glass transition, and the ductility of bitumen?5
Semi-supervised semantic segmentation using cross-consistency training for pavement crack detection5
Performance evaluation of surface-treated montmorillonite nanoclay-modified bitumen binder at high- and intermediate-temperature conditions5
Impact of pavement rutting on vehicle safety: a closed-loop assessment method5
Optimised mix design for cold mix asphalt considering various curing parameters of loose mixture5
Investigation of recycled asphalt mixtures in Missouri: laboratory, field, and ILLI-TC modelling5
Life-cycle cost analysis of rehabilitation strategies for asphalt pavements based on probabilistic models5
Numerical investigation on coupled thermo-mechanical critical response of curved ramp bridge deck pavement5
Investigation of abrasion resistance of geopolymer concrete cured in ambient temperature for pavement applications5
A method for characterising RAP degree of binder activity5
Experimental study on properties of epoxy binder and epoxy bonding chips layer for steel bridge deck pavement5
0.13480186462402