Road Materials and Pavement Design

Article	Citations
Applicability of various mixing rules for hot asphalt recycled binders	50
Thematic issue: asphalt pavement & environment	45
Effective temperature model for rutting prediction considering temperature distribution inside the asphalt pavements	43
Impact of solar exposure on chemical and rheological properties of hybrid polymer modified bitumen with recycled plastics	40
Critical dynamic stress for the frozen subgrade soil	36
Effect of lime and cement fillers on moisture susceptibility of cold mix asphalt	35
Investigating the use of zinc production wastes as filler in asphalt mixtures	34
Development of a balance mix performance framework for assessing high-recycled asphalt mixtures’ resistance: a study integrating laboratory and field findings	32
The incorporation of the plastic-coated aggregates into a South African asphalt mixture	30
Key pavement condition indicators for assessing highway pavement maintenance quality index	30
Research on probability index of road driving comfort based on driving vibration distribution	30
Evaluation and modelling of low-temperature fracture properties of asphalt binders in thin film by means of the local fracture test	29
Analytical modelling of complex stiffness modulus tests in direct tension-compression on asphalt concrete and nonlinearity effect due to strain amplitude	28
Cracking performance evaluation and modelling of RAP mixtures containing different recycled materials using deep neural network model	27
Correlations among physical properties of pervious concrete with different aggregate sizes and mix proportions	27
Functional and field performance of epoxy asphalt technology – state-of-the-art	25
Rheological and performance characterisation of cold bituminous mastics made with different bitumen emulsions and mineral fillers	25
Expansion process of foamed bitumen considering surface energy	24
Mechanical strength of an hot-mix asphalt using recycled concrete aggregate: mass and volume proportioning	22
Optimising waste cooking oil as rejuvenator for recycled mixtures: a laboratory-based approach	22
Evaluation of the influence of warm additives modified by Vestenamer polymer on the performance of stone matrix asphalt containing crumb rubber	22
Heterogeneous numerical simulation of fatigue behaviour of porous HMA by a multi-scale approach	21
Chemical, mineralogical, microstructural and engineering properties of tropical soils stabilised with the combined and individual use of different types of steel slag	19
Vehicle excess fuel consumption due to pavement deflection	19
Effect of bottleneck-causing clogging on infiltration-runoff of pervious concrete pavement system	18

Pavement subgrade stabilisation using refractory castables: minimisation of layer thickness	18
Ageing behaviour of naturally and artificially aged bitumen samples after the addition of rejuvenators	18
The role of inorganic nanoparticles in photo-oxidation ageing resistance of the thermochromic asphalt binder	18
Evaluating the optimised YOLO-based defect detection method for subsurface diagnosis with ground penetrating radar	18
Ultrasonic characterisation of the elastic properties of mineral aggregates used in asphalt mixtures	18
Thermoreversible aging in asphalt binders	17
Durability of GGBS based alkali-activated binder treated peat through wetting-drying cycle	17
Experimental investigation of mechanical properties of roller compacted concrete pavement (RCCP) reinforced with date palm fibres	16
Effects of lead time and manufacturing methods applied for polymer-modified bitumen emulsion (PMBE) on microsurfacing performance	16
Evaluating circularity in pavements using mass and value-based indicators	16
A novel approach for automatic asphalt pavement crack length estimation	15
Comparative investigation of different blends ageing behaviours for short-term thermal oxidation ageing mechanism of SBS-modified bitumen	15
Asphaltene agglomeration through physical-chemical and rheological testing	15
The investigation on the effects of sulphur on the performance of sulphur-bitumen binder	15
Effects of waste plastic addition via dry method and pre-mixing temperature on the mechanical performance of asphalt concrete	14
Impact of air voids and environmental temperature of asphalt concrete on black ice	14
Evaluating thermal contraction behaviour of basalt mastic using micromechanical finite element modelling	14
Dielectric characterisation of rock aggregates with different grain size distributions	14
Enhanced mechanical performances of epoxy asphalt adhesives modified by graphene oxide	14
2-D FEM thermomechanical coupling in the analysis of a flexible eRoad subjected to thermal and traffic loading	14
Full-scale field test of early-age behaviour of partially continuous reinforced concrete pavement	14
Field assessment of rigid pavement stabilisation using cementitious grout: case study	13
Dynamic behaviors of frozen silt under repeated traffic loading	13
Decoupling oxidation and hardening in ageing: evaluation of bitumen-stone adhesion using different experimental methods	13
Rheological characteristics of epoxy asphalt binders and engineering properties of epoxy asphalt mixtures – state-of-the-art	13
Effect of carbonation of soil-slag mixtures on the resilient behaviour and structural response of an asphalt pavement	13
Performance based design of bonded whitetopping overlays	12
Model for calculation of thermal stresses in concrete pavement slabs with refined non-linear deformation constraints	12
Leaching of polycyclic aromatic hydrocarbons and heavy metals from stored reclaimed asphalt pavement	12
Replica road pavements for rolling resistance measurements	12
Assessment of satellite-based MERRA climate data in AASHTOWare pavement mechanistic-empirical design	12
Evaluating the effects of different modifiers on the water stability and storability of cold-patching asphalt mixture	12
The effect of eco-friendly functionalised acid sludge on thermo-rheological characteristics of bituminous composites	12
Artificial intelligence techniques for pavement performance prediction: a systematic review	11
Rheological performance of modified binders with LDPE from municipal and consumer waste sources	11
Aggregate migration and self-organisation properties of asphalt mixtures during compaction process	11
Exploration of calcined clays and nanoclays as a potential construction material for sustainable development: a comprehensive and state-of-the-art review	11
Editorial	11
Evaluation of warm mix effect in laboratory using a self-developed WMA additive Alube	11
Experimental and numerical study on ovalisation test for pavement and HMA layer interface behaviour assessment	11
A review on soil stabilisation of unsealed road pavements from an Australian perspective	11
Microstructural characterisation and analysis of coarse aggregates in asphalt drill cores	10
Fatigue testing on bitumen binder using different column specimen shapes	10
Comparison between ACN–PCN and ACR–PCR for rigid airport pavement with case study	10
Investigation of using municipal solid waste incineration fly ash as alternative aggregates replacement in hot mix asphalt	10
Predicting pavement performance using distress deterioration curves	10
Correction	10
Application of single score methods for environmental impact assessment to compare pavement technologies	10
Biopolymers as bitumen additives: a systematic quantitative literature review	10
Developing a skid resistance prediction model for newly built pavement: application to a case study of steel bridge deck pavement	10

Experimental and numerical study of conductive heat transfer in aggregate particles using a flighted, rotary drum	10
Geopolymerisation and micro-pore assessment of soft soil used as flexible pavement material in road construction	10
Physicochemical and aging characterisation of bio-binders from pine wood resin for paving applications	9
Impact of pre-treated recycled concrete aggregate on performance of bituminous mix composed of reclaimed asphalt pavement with waste polyethylene	9
Field factors impacting incentives of quality control for performance (QCP) and pay for performance (PFP) specifications for hot-mix asphalt in Illinois	9
Curing conditions effect on the stabilization of recycled asphalt pavement with alkali-activated metakaolin and rice husk ash-derived activator	9
Performance of pervious concrete influenced by typical properties of recycled concrete aggregate and suggestions for practical use	9
Expansion method and application of initial deflection data for asphalt pavement based on the unascertained number theory: a case study	9
State of the art on the hydraulic properties of pervious concrete	9
Effects of cementitious stabilisers on performance and life cycle impacts of full-depth reclamation	9
Bituminous pavement overlay of a porous asphalt mixture with ladle furnace slag: a pilot project.	9
Evaluating the combined effect of photooxidation and thermal ageing of bitumen	9
Method of evaluation of pavement bitumen adhesion	9
A comprehensive evaluation on particles breakage characteristics of waste argillaceous gangue as subgrade filler	8
Waste chicken fat oil as a biomass regenerator to restore the performance of aged asphalt: rheological properties and regeneration mechanism	8
Optimised asphalt overlay configuration to mitigate reflective cracking using a new innovative full-scale testing	8
Assessment of the low-temperature performance of asphalt mixtures for bridge pavement	8
Extrinsic healing of asphalt mixtures: a review	8
Strength improvement of clay subgrade soil stabilised with recycled concrete aggregate and granulated blast furnace slag	8
Performance and assessment of modified cold recycled asphalt emulsion mixture	8
Correlating microscopic pore characteristics with permeability coefficient in porous asphalt concrete: an X-ray CT-based approach	8
Experimental investigation and AutoML prediction of the resilient behaviour of coarse-grained waste rocks	8
Temperature correction for traffic speed deflectometer measurements on flexible pavement using ANN models	8
Full-scale life cycle assessment of asphalt concrete base course containing RAP under different temperature conditions	8
Moisture-induced damage potential of asphalt mixes containing polyphosphoric acid and antistripping agent	8
The impact of reactive oxygen species coupled with moisture on bitumen long-term aging	8
Wetting kinetics of a bitumen droplet on a glass substrate	8
Impact of crushing shape and geopolymerization on reclaimed concrete aggregate for recycling in the flexible pavement: an enhanced circular economy solution	8
Microstructural analysis on the variation of resilient modulus of lime modified soil under freezing–thawing action	8
A review on pavement data acquisition and analytics tools using autonomous vehicles	8
Biochar effects on the performance of conventional and rubberized HMA	7
Deterioration of low-temperature property of modified asphalt under ultraviolet ageing considering physical hardening	7
Development of prediction models for interlayer shear strength in asphalt pavement using machine learning and SHAP techniques	7
Effects of temperature on the dynamic response of airfield runway subgrade in cold regions	7
Performance evaluation of marginal materials in geosynthetic reinforced base layers	7
Advanced characterisation of multi-recycled warm asphalt pavement (MRWAP) with high content of recycled asphalt pavement	7
Evaluation of joint activation and joint spacing in concrete overlays	7
Measuring surface texture of in-service asphalt pavement: evaluation of two proposed hand-portable methods	7
Freeze–thaw resistance of pervious concrete produced with different aggregates and fibres	7
Spray water cooling of newly laid asphalt pavement for rapid opening to traffic	7
Numerical determination of pavement mean texture depths at different degrees of traffic polishing-induced wear	7
Study on the rheological behaviour of UHPC considering the combination of temperature and mineral admixture	7
The role of fine aggregate matrix in the linear viscoelastic behaviour of cement-bitumen treated materials	7
Mechanical behaviour of concrete pavement widening	7
Dynamic modulus and damping ratio of compacted loess under long-term traffic loading	7
Modelling of the fatigue cracking resistance of grid reinforced asphalt concrete by coupling fast BEM and FEM	7
Laboratory fatigue performance of the cement-stabilised loess fabricated using different compaction methods	7
Effect of different adding methods of Nano-TiO 2 to micro-surfacing layer on NO x degradation	7
A posteriori constrained bio-inspired algorithm for enhancing strength and resilient modulus of soft subgrade soil	7
Comparison of fly ash and rice husk ash effects on the mechanical properties of roller compacted concrete for pavements	6
Experimental study on properties of epoxy binder and epoxy bonding chips layer for steel bridge deck pavement	6
Investigation of abrasion resistance of geopolymer concrete cured in ambient temperature for pavement applications	6
Editorial, SI EATA2023	6
Conversions of viscoelastic deflections of asphalt pavement under TSD load to elastic ones for pavement condition assessments	6
How does the isophthalic unsaturated polyester affect the dielectric properties, the glass transition, and the ductility of bitumen?	6
Statistical investigation of aggregate size and shape impact on porosity and compressive strength of pervious concrete	6
Comparing the performance of SBS and thermoplastics modified asphalt binders and asphalt mixes	6
Accuracy assessment of light detection and ranging system measurements for jointed concrete pavement surface geometry	6
Evaluation of the cohesive bond strength of bitumen and mastics	6
Feasibility of using bio-oil from biodiesel production for bio-bitumen creation	6
Pavement temperature model for Canadian Asphalt Binder selection: Introduction to the CPT model	6
An alternative method for determination of compaction level for the pavement granular layers	6
Improving the accuracy of mineral aggregate surface energy estimation based on goniometry	6
Study on interface shear characteristics of PVA-ECC composite steel bridge deck	6
Modelling the thermophysical properties of pavement layers using real-time sensor-collected data	6
Multiscale characterisation on the adhesion and selective adsorption at bitumen–mineral interface	6
Rutting analysis of different rubberised stone mastic asphalt mixtures: from binders to mixtures	6
Prediction of asphalt concrete energy release rate from Texas Overlay Test using machine learning	6
Evaluation of municipal solid waste incineration fly ash based geopolymer for stabilised recycled concrete aggregate as road material	6
An alternative approach for characterization of the linear viscoelastic behavior of asphalt binders	6
Effect of surface free energy on water absorption of roller-compacted concrete pavement containing calcium stearate powder	6
Suction stress effects on stress-dependent resilient modulus of subgrade soils	6
The effect of gamma-irradiated recycled polyolefins as asphalt binder modifiers	6
Asphalt binder selection for future Canadian climatic conditions using various pavement temperature prediction models	6
Parametric study to investigate the deflection and stress behaviour of Interlocking Concrete Block Pavement	6
Experimental research on applicability of weathered red sandstone soil to roadbed filling	6
Application of recycled lignin powder as a sustainable additive for soil improvement against water resistance	6
Small-scale laboratory tests for quantifying aggregate interlocking in short-panelled concrete pavements	6
Determination of equivalent axle load factors with the use of strain energy of distortion	6
Effect of aged material properties on transverse crack performance with two-round field observations	6

Relationship between crossover modulus and asphalt chemistry to oxidation process based on the RHEO + method	6
Volume stability evaluation and life prediction of steel slag water-stabilised materials	6
Effects of moisture content and soil suction on the permanent deformation of tropical subgrade soils: experimental investigations and modelling	5
Evaluation of complex modulus and fatigue properties of cold recycled material mixtures using small-scale specimens	5
Effect of low dosage crumbed rubber on the mechanical properties of a dense graded asphalt mixture	5
Machine learning applications in identifying outliers within asphalt mixture fracture test data*	5
Asphalt mixtures degradation induced by water, frost, and road salt in the 4-PB bending test evaluated by stiffness variability	5
Pavement rutting performance analysis of automated vehicles: contribution of flexible pavement layers’ characteristics	5
Mechanical performance of rehabilitated bituminous layers with paving fabric under cyclic loading	5
Estimating local pavement performance and remaining service interval using neural networks-based models and automation tool	5
Novel non-nuclear methodology for coarse granular soil compaction control: the Sherbrooke Method	5
Evaluating the mechanical performance and durability of cement-treated base mixtures containing 100% Reclaimed Asphalt Pavement	5
Uncertainty analysis of life cycle assessment of asphalt surfacings	5
Numerical analysis of field aging in asphalt pavements via coupling of diffusion process and kinetics aging model	5
Preparation of inorganic binder-stabilised material with iron tailings: strength formation and gradation optimisation	5
Stochastic-based pavement rehabilitation model at the network level with prediction uncertainty considerations	5
Effect of bio-rejuvenator on recycled porous asphalt mixes	5
The use of the semi-circular bending method to assess the intermediate-temperature fracture toughness of asphalt concrete mixes with reclaimed asphalt shingles	5
Studying the impact of aggregates and mix volumetric properties on the moisture resistance of asphalt concrete using a feed-Forward artificial neural network	5
Investigating the impact of limonene on asphalt-aggregate surface adhesion based on molecular dynamics simulations	5
Fatigue damage caused by superload vehicles in concrete pavements	5
3D Spectral element model with a space-decoupling technique for the response of transversely isotropic pavements to moving vehicular loading	5
Partially replacing cement with rice husk ash (RHA) in cement stabilised macadam (CSM) containing reclaimed asphalt pavement (RAP) for qualified base materials	5
Effect of nano calcium carbonate (nano CaCO3) on the strength and consolidation properties of clayey sand soil	5
Cement – natural rubber latex stabilised recycled concrete aggregate as a pavement base material	5
Aggregate boundary recognition of asphalt mixture CT images based on convolutional neural networks	5
Responses of a thin flexible pavement loaded with tires of various dimensions and configurations	5
Mechanistic-empirical model to predict transverse joint faulting of bonded concrete overlays of asphalt	5
TSRST heterogeneous modelling for investigating failure depending on asphalt mix design and experimental conditions	5
An improved ResNet50 model for predicting pavement condition index (PCI) directly from pavement images	5
Effectiveness of the shear strength ratio as an indicator of moisture susceptibility of asphalt mixtures	5
Optimising bitumen modification: how styrene–butadiene–styrene (SBS) characteristics and content affect bitumen behaviour	5
Comparison of lab-produced asphalt emulsions by manufacturing equipment type	5
Rheological characterisation of rejuvenator blending lines	5
Effect of various interface bonding conditions on critical response characteristics for cracking potential of asphalt pavements	4
Performance improvement of slurry seal by glass powder: mechanical evaluation and life cycle assessment	4
Analysis of the binder-aggregate interface of chip seal binders in different stages of ageing using the bitumen bond strength (BBS) test	4
Experimental evaluation of fatigue and recovery properties of a bituminous mixture during cyclic loading and rest tests	4
Effects of polyacrylonitrile fibres and high content of RAP on mechanical properties of asphalt mixtures in binder and base layers	4
Experimental study on soft rock subgrade reinforced with geocell	4
Study on mechanism and application of PFWD for subgrade quality detection: semi-analytical approach and experiment	4
Real-time edge AI algorithm for road defects detection	4
Comparison of open-graded, dense-graded and semi-porous asphalt mixtures for motorway wearing courses based on Wehner-Schulze tests and photogrammetry	4
Response surface regression and machine learning models to predict the porosity and compressive strength of pervious concrete based on mix design parameters	4
Polymer-modified asphalt binders’ properties deterioration under the action of chloride salt	4
Investigating the effect of ultraviolet aging on the healing capacity of bitumen containing taconite tailings	4
A study investigating the impact of waste cooking oil and waste engine oil on the performance properties of RAP binders	4
Simplified Markovian-based pavement management model for sustainable long-term rehabilitation planning	4
Numerical and outdoor experimental study on active snow melting of conductive rubber composites in roads	4
Performance of the UAS-LiDAR sensing approach in detecting and measuring pavement frost heaves	4
Data fusion for pavement performance modelling using the Bayesian approach: case study in Afghanistan	4
The effect of multiaxial geocomposite reinforcement on fatigue performance and crack propagation delay in double-layered asphalt beams	4
Towards A better understanding of crack propagation in asphalt pavements with reinforcement grids (using laboratory-scaled traffic load and interlayer shear test)	4
Viscoelastic analysis of surface responses in flexible pavements under different loading conditions	4
Optimised durable pavement rolling resistance	4
Effect analysis of using tall oil pitch (TOP) to partially extend bitumen in asphalt pavements: comparison of different TOPs	4
Key parameters controlling strength and resilient modulus of a stabilised dispersive soil	4
Reconstruction and evolution of 3D model on asphalt pavement surface texture using digital image processing technology and accelerated pavement testing	4
Effect of ozone aging on the rheological and chemical properties of crumb rubber-modified bitumen	4
Impact of aggregate structure restoration on rutting resistance of asphalt mixtures with very high percentages of RAP	4
Investigating the rheological properties and compatibility behaviours of RET/PE and WR/CR/SBS compound-modified bitumen	4
Multiple stress creep and recovery test for bituminous binders – influence of several key experimental parameters	4
Performance of crumb rubber bitumen and asphalt modified in the wet process alone and in combination with SBS polymer	4
Linear and nonlinear viscoelastic parameters of asphalt binders modified with softening agents	4
Establishing threshold value of surface free energy and binder bond strength parameters for basaltic asphalt mixes	4
A comprehensive study on the performance of alkali activated fly ash/GGBFS geopolymer concrete pavement	4
Characterisation and modelling of subgrade resilient modulus for pavement structural design in Egypt	4
Evaluation of chemical composition and physical properties of bituminous binders and fractions	4
Bitumen reuse: physical and chemical approach to investigate the effectiveness of rejuvenators	4
Investigating the properties of asphalt binder modified by high- and low-density polyethylene polymer and nano-silica	4
Surrogate models to predict maximum dry unit weight, optimum moisture content and California bearing ratio form grain size distribution curve	4
Analysis of coupled thermo-mechanical response and damage behaviour of curved ramp bridge deck pavement using a 3D multiscale method	4
3d topological characterisation of aggregates contact network in asphalt mixture	4
Performance evaluation of demolition waste infilled geocell-reinforced subgrade by flexural and rutting analysis	4
An experimental investigation on geotechnical properties of a clayey soil stabilised with lime and zeolite in base and subbase courses	4
Prediction of manhole-cover skid-resistance performance using decision trees and regression analysis	3
Rubberised stone mastic asphalt mixtures: a performance-related evaluation	3
Laboratory study and performance evaluation of cement treated base using chemical stabiliser	3
Viennese Ageing Procedure (VAPro): adaptions and further development to address low-temperature performance of aged asphalt mixtures	3
Statistical-empirical pavement temperature prediction models based on data from road weather stations in Estonia	3
Impact of pavement rutting on vehicle safety: a closed-loop assessment method	3
Desulphurisation of waste rubber powder using mechanochemical method and the influence on modified asphalt	3
Mechanical performance of asphalt base layers with high RAP content and recycling agents	3
Evaluation on the use of COVID-19 single-use face masks to improve the properties of hot mix asphalt	3
Effect of superficially modified zinc oxide nanoparticles as an additive on the rheological performance of asphalt binder	3
Comparison of wide base single tyre and dual tyre with different factors using heavy vehicle simulator*	3
Influence of confining pressure on rubberised cement bound aggregate behaviour during static triaxial test	3
Semi-supervised semantic segmentation using cross-consistency training for pavement crack detection	3
Image-based gradation and aggregate characterisation: case of cement-stabilised quarry fines	3
Investigation into the deicing efficiency and self-healing capability of asphalt mixtures with aluminum dross powder and steel fiber	3
Review of methodology for life cycle assessment and life cycle cost analysis of asphalt pavements	3
Feasibility of handheld X-ray fluorescence analyser for predicting aggregate frictional resistance using elemental composition	3
Characterising the resilient behaviour of unsaturated sandy soils under suction-controlled tests	3
PaveSAM – segment anything for pavement distress	3
Effective volume filling ratio of siliceous fillers within bituminous composites: experimental and micromechanical modelling	3