Proceedings of the Institution of Mechanical Engineers Part L-Journal

Article	Citations
Study on the effect of the welding environment on the dynamic recrystallization phenomenon and residual stresses during the friction stir welding process of aluminum alloy	43
Metamaterials and their applications: An overview	37
A modified version of friction stir welding process of aluminum alloys: Analyzing the thermal treatment and wear behavior	34
Microstructure and mechanical characterization of tungsten inert gas-welded joint of AA6061 and AA7075 by friction stir processing	28
On the role of input welding parameters on the microstructure and mechanical properties of Al6061-T6 alloy during the friction stir welding: Experimental and numerical investigation	24
Finite element bending analysis of symmetric and non-symmetric functionally graded sandwich beams using a novel parabolic shear deformation theory	20
Advances in simulation and experimental study on intermetallic formation and thermomechanical evolution of Al–Cu composite with Zn interlayer: Effect of spot pass and shoulder diameter during the pin	18
A review on application of biomaterials for medical and dental implants	17
On comparison of recycled LDPE and LDPE–bakelite composite based 3D printed patch antenna	17
Size-dependent vibration analysis of fluid-infiltrated porous curved microbeams integrated with reinforced functionally graded graphene platelets face sheets considering thickness stretching effect	17
An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability	16
The effect of variable properties and rotation in a visco-thermoelastic orthotropic annular cylinder under the Moore–Gibson–Thompson heat conduction model	15
Energy absorption of foam-filled corrugated core sandwich panels under quasi-static loading	15
Identification of cracks in an Euler–Bernoulli beam using Bayesian inference and closed-form solution of vibration modes	14
Residual stress analysis, microstructural characterization, and mechanical properties of tungsten inert gas-welded P92/AISI 304L dissimilar steel joints	13
Solid-state joining of aluminum to titanium: A review	13
A critical review on tribological properties, thermal behavior, and different applications of industrial waste reinforcement for composites	13
Optimizing the ultrasonication effect in stir-casting process of aluminum hybrid composite using desirability function approach and artificial neural network	12
Exact solution for free vibration analysis of linearly varying thickness FGM plate using Galerkin-Vlasov’s method	12
Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method	11
Experimental investigation on dissimilar weld between super duplex stainless steel 2507 and API X70 pipeline steel	11
Effect of microstructure and precipitate formation on mechanical and corrosion behavior of friction stir processed AA6061 alloy using different cooling media	11
Micro-mechanical analysis of the pineapple-reinforced polymeric composite by the inclusion of pineapple leaf particulates	11
Response analysis of hybrid functionally graded material plate subjected to thermo-electro-mechanical loading	11
Impact of graphite particle surface modification on the strengthening of cross-linked polyvinyl alcohol composites: A comprehensive investigation	10

Material Selection Decision-Making Method for Multi-material Lightweight Automotive Body Driven by Performance	10
A multi-objective optimization algorithm for Bouc–Wen–Baber–Noori model to identify reinforced concrete columns failing in different modes	10
Selection of sustainable material for the manufacturing of complex automotive products using a new hybrid Goal Programming Model for Best Worst Method–Proximity Indexed Value method	10
Insights to improve the tribo-performance of materials used under slurry erosion applications: A review	10
Numerical simulation of the thermomechanical buckling analysis of bidirectional porous functionally graded plate using collocation meshfree method	9
Mixed finite element formulation for bending of laminated beams using the refined zigzag theory	9
Influence of post-heat treatment on microstructure, mechanical, and wear properties of maraging steel fabricated using direct metal laser sintering technique	9
Mechanical performance of three-dimensional printed sandwich composite with a high-flexible core	9
Influence of nano-TiO2 particles on the microstructure, mechanical and wear behaviour of AA7178 alloy matrix fabricated by stir casting technique	9
Parameter identification and dynamic response analysis of a modified Prandtl–Ishlinskii asymmetric hysteresis model via least-mean square algorithm and particle swarm optimization	8
Effect of cryo-rolling on mechanical properties and microstructure of pure copper	8
A review on cotton fibre-reinforced polymer composites and their applications	8
Analysis of tool wear and deformation in friction stir welding of unequal thickness dissimilar Al alloys	8
Enhancing corrosion resistance and mechanical properties of dissimilar friction stir welded 5083-6061 aluminium alloys using external cooling environment	8
Functionally graded cellular cores of sandwich panels fabricated by additive manufacturing	7
Fabrication of bionanocomposites reinforced with hemp nanocellulose and evaluation of their mechanical, thermal and dynamic mechanical properties	7
Bio-inspired 3D-printed lattice structures for energy absorption applications: A review	7
Effect of carbon nanotube-reinforced magneto-electro-elastic facings on the pyrocoupled nonlinear deflection of viscoelastic sandwich skew plates in thermal environment	7
Ballistic characterization of fiber elastomer metal laminate composites and effect of positioning of fiber reinforced elastomer	7
Development of Al2O3-based hybrid ceramic matrix composite coating to mitigate the erosive wear of advanced steel	7
Dynamic modelling and analysis of smart carbon nanotube-based hybrid composite beams: Analytical and finite element study	7
Formability of wire-arc deposited AISI 316L sheets for hybrid additive manufacturing applications	7
Characterization of penetrate and interpenetrate tessellated cellular lattice structures for energy absorption	7
Microstructural and mechanical characterization of novel AA7075 composites reinforced with rice husk ash and carbonized eggshells	7
Fracture energy assessment of adhesives – Part I: Is GIC an adhesive property? A neural network analysis	7
Simulation-based assessment of coupled frequency response of magneto-electro-elastic auxetic multifunctional structures subjected to various electromagnetic circuits	7
The synergistic effect of hybridizing and aligning graphene oxide nanoplatelets and multi-walled carbon nanotubes on mode-I fracture behavior of nanocomposite adhesive joints	7
Effects of cyclic ageing on the tensile properties and diffusion coefficients of an epoxy-based adhesive	7
Physical modeling and experimental verification of magneto-rheological damper under medium and high frequency excitation	6
Comparative study of thermo-mechanical and thermogravimetric characterization of hybrid dental restorative composite materials	6
Bio waste (Pistacia vera nut shell) filled polymer composites for tribological applications	6
Exploring the mechanical, metallurgical, and fracture characteristics of hybrid-reinforced magnesium metal matrix composite synthesized via friction stir processing route	6
Numerical simulation of welding deformation and residual stress in aluminum alloy plate-to-sleeve welded joints	6
Using shot peening and burnishing to improve fatigue performance of additively manufactured 316L stainless steel	6
Reliability of reinforced concrete beams in serviceability limit state via microprestress-solidification theory, a structural health monitoring strategy	6
Development of a fuzzy-TOPSIS multi-criteria decision-making model for material selection with the integration of safety, health and environment risk assessment	6
Development of 3D printing sustainable mortars based on a bibliometric analysis	6
Towards finding a novel constant between local and bulk strength of friction stir processed aluminum alloys	6
Enhancement of machining and surface quality of quaternary alloyed NiTiCuZr shape memory alloy through ultrasonic vibration coupled WEDM	6
Ballistic performance of composite structure configurations with high elongation calendered rubber layer laminated to AA5083-H112 aluminum alloy	6
Improving the mechanical performance and impact damage tolerance of glass composite laminates via multi-scales of hybridisation	6
The influence of holding time on the characteristics of friction stir welded dissimilar magnesium alloy joints during post welding heat treatment	6
Simultaneous effect of temperature, shrinkage, and self-weight creep on RC beams: A case study	6
Mechanical properties of aluminum bonded joints reinforced with functionalized boron nitride and boron carbide nanoparticles	6
Effect of friction time on heat distribution, material flow, and microstructure of friction welding of dissimilar steels	6
Joining of aluminium matrix composites using friction stir welding: A review	6
Metamaterial-inspired electrically small antenna for microwave applications	6
Mechanical performance of e-glass reinforced polyester resins (isophthalic and orthophthalic) laminate composites used in marine applications	6
Three-dimensional printed thermoplastic polyurethane on fabric as wearable smart sensors	6
Materials selection criteria weighting method using analytic hierarchy process (AHP) with simplest questionnaire and modifying method of inconsistent pairwise comparison matrix	5

Investigation of support structure parameters and their affects during additive manufacturing of Ti6Al4V alloy via electron beam melting	5
Review on the advancements and relevance of emerging joining techniques for aluminium to polymers/carbon fibre-reinforced polymer lightweight hybrid structures	5
Hot corrosion and CMAS degradation of laser-glazed YSZ coating with optimum parameter	5
Submerged ultrasonic plastic welding: A computational and experimental investigation	5
On programming of polyvinylidene fluoride–limestone composite for four-dimensional printing applications in heritage structures	5
Investigation of microstructure, mechanical, and corrosion properties of Inconel 617 joints welded by laser–MIG hybrid welding	5
Thermo-mechanical modelling of the Friction Stir Spot Welding process: Effect of the friction models on the heat generation mechanisms	5
Fabrication and characterization of laminated natural fibers and SS303 wire mesh reinforced epoxy-based hybrid composite	5
Tensile fatigue response of a novel carbon/flax/epoxy hybrid composite under strain-controlled and stress-controlled amplitude	5
A new methodology for thermostructural topology optimization: Analytical definition and validation	5
Joining sheets made from dissimilar materials by hole hemming	5
The characterization of plastic behavior and mechanical properties in the gradient nanostructured copper	5
Effect of metal and polymer mating gears on the bending fatigue performance of asymmetric polymer gears	5
Development and characterization of multiwalled carbon nanotube-reinforced microwave sintered hybrid aluminum metal matrix composites: An experimental investigation on mechanical and tribological perf	5
Mechanical and thermal performance of additively manufactured copper, silver and copper–silver alloys	5
Dynamic analysis of soil-structure interaction shear model for beams on transversely isotropic viscoelastic soil	5
Optimal three-dimensional design of functionally graded parts for additive manufacturing using Tamura–Tomota–Ozawa model	5
Effects of particulate reinforcements on the hardness, impact and tensile strengths of AA 6061-T6 friction stir weldments	5
Dual-band THz antenna with SNG loads for biosensing and early skin cancer detection with Fano response: A numerical study	5
Effect of processing parameters and heat treatment techniques on foaming properties of aluminium foam developed by friction stir processing route	5
Lateral flexural vibration reduction in a periodic piping system enhanced with two-degrees-of-freedom resonators	5
Effect of carbon nanotubes on microhardness and adhesion strength of high-velocity oxy-fuel sprayed NiCr–Cr3C2 coatings	5
Design of an auxetic cellular structure with different elastic properties in its three orthogonal directions	5
The synergy of fiber surface treatment and nanoclay on the static mechanical and tribological behaviors of Palmyra fruit fiber/Montmorillonite nanoclay reinforced polyester hybrid composites	5
On failure analysis of three-dimensional printed functionally graded material prepared by direct metal laser sintering	5
The influence of vibration amplitude on AA7075-T6 corrosion resistance improvement during ultrasonic-assisted burnishing	5
Experimental, numerical, and multi-objective optimization investigations on the energy absorption features of single- and bi-layer deep-drawn cups	4
Creation and finite-element analysis of multi-lattice structure design in hip stem implant to reduce the stress-shielding effect	4
A comparison of microstructure and mechanical characteristics correlation of the joint specimens for duplex stainless steel UNS S32304 and super-duplex stainless steel UNS S32750: The role of post-wel	4
Evaluating the thermal conductivity coefficient of polypropylene/graphene nanocomposites: A hierarchical investigation	4
Oxidation issues during heat treatment and effect on the tribo-mechanical performance of electroless Ni-P–Cu deposits	4
Damage detection of composite beams using vibration response and artificial neural networks	4
Increasing flexibility of self-piercing riveting by reducing tool–geometry combinations using cluster analysis in the application of multi-material design	4
The effect of metallic fiber geometry and multi-walled carbon nanotubes on the mechanical behavior of aluminum fiber-reinforced composite adhesive joints	4
Stress–strain evaluation of structural parts using artificial neural networks	4
Isotropic auxetic structure with fixed Poisson's ratio for piezo-resistive strain sensor to detect human body motion	4
Comparative wear behaviour of Ni-Cr-B-Si hardface coatings made by cold metal transfer and plasma transfer Arc welding processes	4
Frictional damping in hollow beam structures joined by bolts, rivets, and adhesive	4
Estimation of mechanical properties of friction stir processed Al 6061/Al2O3-Tib2 hybrid metal matrix composite layer via artificial neural network and response surfac	4
Numerical simulation of surface topography and residual stress after abrasive water jet sequential peening	4
Parametric study of a novel magneto-electro-aeroelastic energy harvesting system	4
Compression and morphological properties of a bio-based polyurethane foam with aluminum hydroxide	4
Influence of Ni and PWHT on microstructure evolution and mechanical properties of GTA-welded duplex stainless steel and super duplex stainless steel joints: A comparative investigation	4
On the applicability limits of double-sided self-pierce riveting	4
Mechanical properties and defects in friction stir welded acrylonitrile butadiene styrene polymer	4
Microstructural and mechanical characterization of lamb bone ash and boron carbide reinforced ZA-27 hybrid metal matrix composites	4
Tribological behavior of tribo-pairs in water hydraulic radial piston pumps	4
Influence of Acacia concinna and Vachellia nilotica seed nanopowder on the properties of short Turkish hemp–reinforced epoxy composites	4
Hot-corrosion behaviour of CNT reinforced Cr3C2-NiCr coatings working under high-temperature sprayed by HVOF method	4
Influence of microstructural evolution and localized delta ferrite number on high-cycle fatigue crack opening and propagation rate	4
Stress analysis of adhesively-bonded single stepped-lap joints based on three-parameter fractional viscoelastic foundation model	4
Role of pre-strain on the corrosion behaviour of Al-Zn-Mg P/M alloy	4
Effect of HVOF spraying parameters on fracture, erosion and thermal properties of Fe alloy-based coating materials	4
Dynamic response analysis of Euler–Bernoulli beam on spatially random transversely isotropic viscoelastic soil	4
Investigation of mechanical and tribological behaviour of expanded perlite particle reinforced polyphenylene sulphide	4
Influence of cyclic aging on adhesive mode mixity in dissimilar composite/metal double cantilever beam joints	4
Tribological characteristics of AA7075 composites reinforced with rice husk ash and carbonized eggshells	4
Experimental studies on friction stir welding of aluminium alloy 5083 and prediction of temperature distribution using arbitrary Lagrangian–Eulerian-based finite element method	4
Design and analysis of lightweight stiffened honeycomb metallic sandwich panels under high-intensity air blast	4
Metallurgical characterization and high-temperature tensile failure of Inconel 617 alloy welded by GTAW and SMAW—a comparative study	4
The fatigue fracture mechanism of Al7075 aluminum alloy clinching joints	4
Investigation of the joinability of the high-strength aluminum alloy AA7075 in shear-clinching processes	4
Evaluation of the mechanical properties of Inconel 718 to SCM 440 dissimilar friction welding through real-time monitoring of the acoustic emission system	4
Wideband fractal-inspired piezoelectric energy harvesters	4
Evaluation of dry sliding wear behavior of abaca/glass fiber hybrid composite for tribological applications	4
Effect of the static shoulder on microstructural, textural, and mechanical characteristics during friction stir welding of Al6061	4
Investigation and analysis of sound-absorbing properties of waste tea leaf fiber as fillers in pineapple leaf/glass fiber-reinforced composites	4
Investigation on mechanical properties and deformation behavior of copper-based three-phase metal matrix composite: Experimental and micro-macro-mechanical finite element analysis	4
Wear behavior of microwave-processed Ni-WC8Co-based functionally graded materials	4
Wear and Morphological Analysis on Basalt/Sisal Hybrid Fiber Reinforced Poly lactic acid Composites	4
An initial investigation to explore the feasibility of fruit waste fillers for developing sustainable thermoplastic composites	3
Multi-material printing of PVDF composites: A customized solution for maintenance of heritage structures	3
Experimental investigation of spring-back phenomenon through an L-die bending process for multilayered sheets produced by the accumulative press bonding technique	3
Crashworthiness analysis of cylindrical tubes with coupling effects under quasi-static axial loading: An experimental and numerical study	3
Crashworthiness analysis of a composite guardrail under impact loading	3
Numerical investigation of plastic flow and residual stresses generated in hydroformed tubes	3
A quantitative and intuitive materials selection multi-attribute decision-making method based on quadrant circular constellation graph	3
Multiaxial fatigue prediction on crack initiation for rubber antivibration design – Location and orientation with stress ranges	3
Addition of compatibilized nanoclay to GFRCs for improved izod impact strength and tensile properties	3
Light duty automotive drum brake squeal analysis using the finite-element method	3

Effect of friction stir welding tool hardness on wear behaviour in friction stir welding of AA-6060 T66	3
A review on β-Ti alloys for biomedical applications: The influence of alloy composition and thermomechanical processing on mechanical properties, phase composition, and microstructure	3
An analytical approach to the nonlinear buckling behavior of axially compressed auxetic-core cylindrical shells with carbon nanotube-reinforced coatings	3
Magneto-electro-mechanical vibration of porous functionally graded smart sandwich plates with viscoelastic core	3
Three dimensional free vibration analysis of functionally graded graphene reinforced composite laminated cylindrical panel	3
Challenges in joining of unequal thickness materials for aerospace applications: A review	3
Buckling and free vibration characteristics of embedded inhomogeneous functionally graded elliptical plate in hygrothermal environment	3
Colour changing material for the estimation of flue gas radiation on the miniature gas turbine surface	3
Joining of ceramic to metal by friction welding process: A review	3
Multi-layer model for moving contact problems of functionally graded coatings with general variations in physical properties	3
Calotropis gigantea stem fiber reinforced thermoset plastics: Interlaminar shear strength and related tribo-mechanical properties	3
The electron beam freeform fabrication of NiTi shape memory alloys. Part I: Microstructure and physical–chemical behavior	3
Natural fibre composites – an alternative to plastics in the automotive industry: A review	3
Understanding the effect of particle reinforcement on friction stir weldment: A review	3
Determination of fracture toughness of an adhesive in civil engineering and interfacial damage analysis of carbon fiber reinforced polymer–steel structure bonded joints	3
Evaluation of the influence of design in the mechanical properties of honeycomb cores used in composite panels	3
Combined effect of fiber hybridization and matrix modification on mechanical properties of polymer composites	3
Tensile and compressive damage assessment of a novel sandwich composite structure made of Kevlar/flax/epoxy hybrid laminates	3
Electric performance of fastened hybrid busbars: An experimental and numerical study	3
Analytical and numerical investigation of wrinkling limit diagram in deep drawing of two-layer sheets with experimental verification	3
Thermoelastic free vibration of rotating pretwisted sandwich conical shell panels with functionally graded carbon nanotube-reinforced composite face sheets using higher-order shear deformation theory	3
Aluminum metal composites primed by fused deposition modeling-assisted investment casting: Hardness, surface, wear, and dimensional properties	3
Physicomechanical and design characteristics of surface high-entropy alloys	3
Optimizing the performance parameters of injection-molded polymer spur gears	3
Performance evaluation of multilayered ceramic composite armors: New design and advanced predictive method	3
A high-fidelity crystal-plasticity finite element methodology for low-cycle fatigue using automatic electron backscatter diffraction scan conversion: Application to hot-rolled cobalt–chromium alloy	3
Printing strategies to fabricate a disk through the fused deposition modeling method	3
Deformation processed high strength high conductivity Cu and Al matrix composite wires: An introductory review	3
Shielding performance of T-shaped periodic barrier for surface waves in transversely isotropic soil	3
Investigation on pulsed electrolytically polished AlSi10Mg alloy processed via selective laser melting technique	3
Fracture analysis of plastically graded material with thermo-mechanical J-integral	3
Improving the mechanical properties and reducing the residual stresses of AA7075 by combination of cyclic close die forging and precipitation hardening	3
Developing methods of constrained groove pressing technique: A review	3
The effect of nano- and micron-scale filler modified epoxy matrix on glass-fiber reinforced polymer insulator component behavior	3
Investigating and comparing the mechanical behavior of multicellular structures made with PLA and ABS under lateral loading	3
An experimental and numerical study on the vibration characteristics of glass fiber composite sandwich panel with lattice cores	3
Experimental and computational analysis of additively manufactured tensile specimens: Assessment of localized-cooling rate and ductile fracture using the Gurson– Tvergaard–Needleman damage model	3
Optimization of fused deposition modeling process parameters using the Taguchi method to improve the tensile properties of 3D-printed polyether ether ketone	3
Influence of extraction methods on mechanical, absorption and morphological properties of water hyacinth (Eichhornia crassipes) natural fibre composites: Environmental threat to successive comm	3
Dynamic Characterization of Additively Manufactured Polylactide (PLA)	3
Energy absorption parameters of multi-cell thin-walled structure with various thicknesses under lateral loading	3
A non-polynomial axiomatic framework for modelling and bending analysis of doubly curved spherical and cylindrical shells: An analytical solution	3
Machine learning assisted nonlinear deflection analysis of agglomerated carbon nanotube core smart sandwich plate with three-phase magneto-electro-elastic skin	3
Drilling performance of uncoated brad spur tools for high-strength carbon fiber-reinforced polymer laminates	2
Fast triethylamine gas sensing performance based on In2O3 nanocuboids	2
Investigation on the coupling interaction in electron beam welded Al–Cu bimetallic sheet	2
Experimental investigations of warm incremental sheet forming process on magnesium AZ31 and aluminium 6061 alloy	2
Development of a frequency-dependent constitutive model for hysteresis of shape memory alloys	2
Response of carbon/PEEK automotive driveshafts with/without an inner isotropic layer at high temperature considering temperature-dependent material properties	2
Processing ultrafine grained non-circular cross-section profiles via severe plastic deformation	2
An octagonal split ring resonator-based double negative metamaterial for S-, X- and Ku-band applications	2
Mode-I and II fracture behavior of metal-to-composite bonded interfaces with a graphene nanoplatelet-reinforced structural epoxy adhesive	2
Numerical investigation of ballistic impact on multilayered ceramic/metal target plate with or without air gap	2
The Effect of Al and Ti Transition Metals on the Wear Resistance of Ceramic Based CrN Coatings; Investigation under Ambient Air and Vacuum Conditions	2
Textile-reinforced mortars; an experimental comparative study of tensile strength improvement methods	2
Simulation of the viscoplastic extrusion process using the radial point interpolation meshless method	2
Collapse analysis of Al 6061 alloy conical shells with circular cutouts under axial loading: experiment and simulation	2
Investigation on ballistic behaviour of friction stir welded rolled AZ31B magnesium alloy	2
Flexural and flammability evaluation of a new bio-based polyurethane foam with alumina trihydrate	2
On three-dimensional printing of 17-4 precipitation-hardenable stainless steel with direct metal laser sintering in aircraft structural applications	2
Finite element-based assessment of energy harvesting in composite beams with piezoelectric transducers	2
Fabrication defects and limitations of AlSi10Mg lattice structures manufactured by selective laser melting	2
Structural response of sandwich structures with CFRP face sheets under quasi-static indentation and high velocity impact: An experimental and numerical study	2
A study on the microstructure, hardness, and tribological behavior of aluminum-based metal–matrix composite fabricated through recursive friction stir processing	2
Mechanical characterization and creep strengthening of AZ91 magnesium alloy by addition of yttrium oxide nanoparticles	2
Experimental and numerical investigations of springback and residual stresses in bending of a three-ply clad sheet	2
Fracture prediction of AA6061-T6 sheet in bending process using Gurson–Tvergaard–Needleman model	2
Buckling characteristics of cut-out borne composite stiffened hyperbolic paraboloid shell panel	2
Topology optimization of adhesive material in a single lap joint using an evolutionary structural optimization method and a cohesive zone model as failure criterion	2
Experimental study on micro electrical discharge machining of alumina–titanium carbide ceramic materials	2
Effect of B4C reinforcement and hot rolling on microstructure and mechanical properties of WE43 magnesium matrix composite	2
Increasing the accuracy of clinching process simulations by modeling the friction as a function of local joining process parameters	2
Performance prediction and parameter optimization of alumina-titanium carbide ceramic micro-EDM hole machining process based on XGBoost	2
Current research and developments in welding of 18% nickel maraging steel	2
Exact solution by dynamic stiffness method for the natural vibration of porous functionally graded plate considering neutral surface	2
Tribological properties of in-situ PVD TiAlN, TiSiN, and TiAlN/TiSiN coatings under ambient air and vacuum environment	2
Experimental evaluation and comparison of silica/biocarbon particulate-epoxy composites for high-strength applications	2
Finite element simulations and experimental verifications for forming limit curve determination of two-layer aluminum/brass sheets considering the incremental forming process	2
Finite element simulations of mechanical behaviour and degradation of iron lattices	2
Investigation of the effect of B4C amount and sintering temperature on the thermal properties of the material in Al 1070–B4C composites	2
Geometric and mechanical joint characterization of conventionally and tumbled self-piercing riveting joints	2
Abrasive wear behavior of Al-TiB2 and Al-TiB2-nano-graphite metal matrix composites	2
Significance of Al2O3 addition in the aluminum 6063 metal foam formation through friction stir processing route – A comprehensive study	2
Effective elastic modulus of foamed long glass fiber reinforced polypropylene: Experiment and computation	2
Damage monitoring of SiC/SiC turbine blisk under overspeed rotation testing using X-ray computed tomography and natural frequency	2
Influence of curvy stiffeners on the axial crushing response of 3D-printed polymer composite cylindrical tubular structures	2
A feasibility study of various joining techniques for three-dimensional printed polylactic acid and wood-reinforced polylactic acid biocomposite	2
Inverse design of layered periodic wave barriers based on deep learning	2
Quench sensitivity of A379 alloy under high-pressure die-casting and gravity-casting processes	2
A dislocation-based yield strength model for nano-indentation size effect	2
Loading–unloading contact analysis of a fractal rough surface with functional gradation	2
Sandwich panel behavior under low-velocity impact with polyurethane core	2
Numerical and experimental investigation for enhancing the energy absorption capacity of the novel three-dimensional printed sandwich structures	2
Relation between durability and mechanical properties on glass fiber reinforced slag-based geopolymer	2
Tribological properties of novel Al 7075(T6)-SiC-crumb rubber-MoS2-based hybrid composites: An experimental approach towards green revolution	2