OOIR: Observatory of International Research

Papers

(The TQCC of Macromolecular Materials and Engineering is 8. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)

Article	Citations
High Porosity Poly(ether ketone ketone): Influence of Solvents on Foam Properties	169
Issue Information: Macromol. Mater. Eng. 8/2025	102
Targeting MDA‐MB‐231 Cancer Stem Cells With Temsirolimus in 3D Collagen/PGA/Na₂SiO₃‐Based Bone Model	95
An Injectable PEG/Diacerein‐Based Anti‐Inflammatory Hydrogel for Promoting Cartilage Regeneration: An In Vivo Study	94
Solvent‐Mediated Self‐Assembly and Hydrogen Bonding in Neutral Alginate: A Molecular Dynamics Study	91
Polypyrrole Modified Granular Activated Carbon Nanocomposite for Treatment of Wastewater Containing Highly Toxic Hexavalent Chromium	89
Conductivity Insights Into the Carbon Nanotubes Mobility Restricted by the Long‐Branched Chains During the Thermal Annealing, Fast Shear Flow and Melt to Solid Cooling Process	85
PBAT/PLA Films and Supercritical Impregnation of Caffeine for Potential Application in Anticellulite Tools	84
Development of Specially Designed Nanoparticle‐coated 3D‐printed Gelatin Methacryloyl Patches for Potential Tissue Engineering Applications	84
Toward a Green Polymerization of Lignin‐Derived Monomers in Ethyl Lactate Solution or Aqueous Emulsion	84
Evolution of Oriented Crystals of Polypropylene for Capacitor Films Subjected to High‐Temperature Stretching	67
From Computational Screening to Enhanced Adsorption: Optimized Removal of Toxic Congo Red by Nitrogen‐rich Triazine Polymers	62
Comparison between Injection Molding (IM) and Injection‐Compression Molding (ICM) for Mass Manufacturing of Thermoplastic Microfluidic Devices	60
Fabrication and DOE Optimization of Electrospun Chitosan/Gelatin/PVA Nanofibers for Skin Tissue Engineering	59
Degradation and Mechanical Behavior of Fish Gelatin/Polycaprolactone AC Electrospun Nanofibrous Meshes	59
Fabrication, Characterization, and Biocompatible Evaluation of Omega‐3 Acid Ethyl Ester–Loaded Poly (ε‐caprolactone) /Gelatin/κ‐Carrageenan Nanofibers for Epilepsy‐Relevant In Vitro Models	56
Improving Infection Resistance in Tissue Engineered Scaffolds for Tensile Applications Using Vancomycin‐Embedded Melt Electrowritten Scaffolds	56
Self‐Texturing Scratch‐Resistant and Bacteria‐Repellent Superhydrophobic Polypropylene Surfaces Through Extrusion‐Based Additive Manufacturing	55
MOFs and MOF‐Based Composites for the Adsorptive Removal of Ciprofloxacin	54
Application of Molecularly Imprinted Polymers in Plant Natural Products: Current Progress and Future Perspectives	53
Design of Reversible Adhesives by Using a Triple Function of Ionic Liquids	50
Development of Bioactive 3D Printed MC/Al/Gel/HA Scaffolds with Enhanced Printability, Flexibility and Mechanical Strength	48
Graphene Oxide‐Incorporated Polylactic Acid/Polyamidoamine Dendrimer Electroconductive Nanocomposite as a Promising Scaffold for Guided Tissue Regeneration	47
Design and Characterization of Decellularized Caprine Liver Matrix Constructs for Liver Tissue Engineering	47
	46

Simulation‐Guided Design of Gradient Multilayer Microwave Absorber with Tailored Absorption Performance	45
Wet Milling of Alginate Alco‐ and Hydrogel Composites: A Facile Top‐Down Approach for Continuous Production of Aerogel Microparticles	45
¹⁹F NMR Relaxometry and Diffusometry for Measuring Cargo Molecule Dynamics in GelMA Hydrogels	45
Characterization of Copper‐ and Bronze‐Filled PLA: Mechanical, Structural, and Biological Insights for Biomedical 3D and 4D Printing	45
3D‐Printed Methane‐Producing Electrodes for Microbial Fuel Cells Developed Using Biogel Ink Containing Live Methanogens and White Charcoal	44
Interfacial Energy and Composition Controlled Self‐Stratification in Polyurethane Coatings	43
Advancing Surface‐Enhanced Electrospun Nanofiber Membranes: Customizing Properties for Enhanced Performance in Membrane Distillation	43
Structural Characteristics of Fibrillar Crystals in Uniaxially Stretched Isotactic Polypropylene Dominated by Temperature and Strain	42
Deposition Patterns of Evaporating Sodium Alginate Sessile Droplets Cross‐Linked by Calcium Chloride	42
Melt‐Processable and Electrospinnable Shape‐Memory Hydrogels	42
Oil‐Infused Polymer Fiber Membranes as Porous Patches for Long‐Term Skin Hydration and Moisturization	40
Sound‐Insulation Performance of Polylactic Acid Parts 3D Printed by Fused Filament Fabrication with Functionally Graded Porous Structure for Effective Noise Reduction	40
Recent Progress in Robust Regenerated Soy Protein Film	40
Shape Memory Thermoplastic Polyamide Elastomer Based on PA1212	39
Issue Information: Macromol. Mater. Eng. 2/2025	36
Additive Manufacturing and Characterization of Polystyrene for Thermal Insulation Applications	36
Infill Density Effects on the Mechanical and Thermal Properties of Copper‐Plated 3D Printed Parts	35
Biomass‐Based Composite Anion Exchange Membranes Using Quaternized Chitosan and Quaternized Polydopamine Nanoparticles for Enhanced Performance	34
Biodegradable Materials Composed of PLA and High Load Triglycerides	34
Optimizing Electrospun PVA Fibers with MXene Integration for Biomedical Applications	33
Recent Developments in Compatibilization Strategies for Polymer Blends and Nanocomposites	32
Masthead: Macromol. Mater. Eng. 6/2024	31
Enhanced Poly(Lactic‐Co‐Glycolic Acid) Composite for Bone Tissue Repair Applications: A Comprehensive Optimization Approach	31
	31
Unveiling the Hidden Networks: AFM Insights into Pre‐Vulcanized Hevea Latex and Its Profound Impact on Latex Film Mechanical Properties	30
Evaluation of the Fusion Quality of Bead Foams Made from Polybutylene Terephthalate (E‐PBT) Depending on the Processing Temperature	30
Laser Structuring of Polyamide Nanofiber Nonwoven Surfaces and Their Influence on Cell Adhesion	30
Masthead: Macromol. Mater. Eng. 10/2024	30
High‐Throughput Electrospinning of Unmodified and Aminated Poly(Pentafluorostyrene) for Fiber‐Reinforced Proton Exchange Membranes	29
Carbon Nanotubes Networking in Styrene‐Butadiene Rubber: A Dynamic Mechanical and Dielectric Spectroscopy Study	29
Happy Birthday, Rolf Mülhaupt!	29
Microencapsulation of Lemongrass ( Cymbopogon citratus ) Essential Oil and Salicylic Acid via in Situ Polymerization and Their Immobilization onto a Cell	29
Porous Hydrogels from Nanoemulsion Templates With Different Structures	28
Polyethyleneimine Controlled Impregnation of Silver Nanowires on Electrospun Ceramic Sponges	28
Correction to “Conductive Open‐Cell Silicone Foam for Tunable Damping and Impact Sensing Application”	28
Influence of Block Copolymer Concentration and Resin Crosslink Density on the Properties of UV‐Curable Methacrylate Resin Systems	28
4D Printing Nanocomposite Hydrogel Based on PNIPAM and Prussian Blue Nanoparticles Using Stereolithography	27
Swelling Behavior and Mechanical Stability of Composite Fibers Prepared from Casein Micelles and Calcium Alginate	27
Electrospun Thermoplastic Polyurethane Fibrous Membrane Decorated with MXene/Carbon Black for Dual‐Mode Human Movement Monitoring and Energy Harvesting	27
Design of a Dual‐Responsive Bilayered Actuator with Alternating Active Layers	27
Facile Synthesis of Fe₃O₄−SiO₂Nanocomposites for Wastewater Treatment	27
Transdermal Administration of Nanobody Molecules using Hydrogel‐Forming Microarray Patch Technology: A Unique Delivery Approach	26
Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes: Morphological, Mechanical, and Gas Barrier Properties	26
Antioxidant and Degradable Poly(Squaryl Thioester) Networks	25
Valorization of Mattress Waste into Thermoplastic Polyurethane (TPU)‐Based Composites for Footwear Midsoles and Outsoles	25
Electrospun Fibers of Polyhydroxyalkanoate/Bacterial Cellulose Blends and Their Role in Nerve Tissue Engineering	24
	24
Thermal Structuring of Surface‐Attached Polymer Networks by C,H Insertion Reactions	24
Issue Information: Macromol. Mater. Eng. 7/2026	24
Optimization of Fiber Laydown During the Fiber Spinning Process by Utilizing the Coanda‐Effect	24

	24
A 4‐Arm PEG‐Thiodepsipeptide Precursor Enables Gelatinase‐Promoted Hydrogel Formation	23
Anisotropic Enhancement in Thermal Conductivity of Graphene Foam/Polymer Composites Based on Uniaxial Compression	23
Infill Density Effects on the Mechanical and Thermal Properties of Copper‐Plated 3D Printed Parts	23
Correction to “PEGylation Effects on the Interaction of Sphingomyelin Nanoemulsions with Serum Albumin: A Thermodynamic Investigation”	23
Engineering Thermoresponsive Emulsions with Branched Copolymer Surfactants	23
A Novel Interface Agent for Preparation of High Gas Barrier Organic Montmorillonite/Brominated Butyl Rubber Nanocomposites	22
Development of a Potential Multilayered Biofunctional Dressing for Localized Postoperative Cancer Treatment: A Hybrid Approach Using 3D Printing and Electrospinning	22
Highly Aligned Centrifugal Spun Polyacrylonitrile Nanofibers Collected and Processed with Automated Tracks	22
Low Power NIR‐LED Actuated MXene‐Loaded Photothermally Active Nanofibers	22
Plasma Carbonization of Sustainable Lignin Fiber‐Derived Papers for Supercapacitor Electrodes	22
Morphology and Mechanical Properties of Poly(vinyl alcohol)/Poly(lactic acid) Blend Films Prepared from Aqueous Dispersions	21
Adhesion and Cohesion Performance of Polyurethane Made of Bio‐Polyol Derived from Modified Waste Cooking Oil for Exterior Grade Plywood	21
Adhesion Improvement of Bio‐Based Epoxy in Environmentally Friendly and High‐Performance Natural Fiber‐Reinforced Composites	21
Anisotropic Enhancement in Thermal Conductivity of Graphene Foam/Polymer Composites Based on Uniaxial Compression	21
Utilization of Ultrasonication as a Method of Reducing Organic and Inorganic Contamination in Post‐Consumer Plastic Film Waste	20
Innovative Thermosensitive Composite Materials: Merging Poloxamer PF‐127 and Polysaccharides for Enhanced Functional Properties	20
Nozzle‐Pressurized Gyration: A Novel Fiber Manufacturing Process	20
Rhodamine B‐Modified Nanocrystalline Cellulose as Fluorescent Sensor for Fe ³⁺ Ion Detection	20
Melt Electrowriting of Poly(dioxanone) Filament Using a Multi‐Axis Robot	20
Electron Beam‐Induced Bulk Modification of Silicone Rubber for Spheroid Formation Devices	20
High‐Performance Stretchable Ag/CNT/LCE Sensor with Anisotropic and Environmentally Adaptive Properties for Maxillo‐Facial Motion Monitoring	19
Fabrication of Zein‐Based Fibrous Scaffolds for Biomedical Applications—A Review	19
Self‐Assembled Patterns in Ferroelectric Polymer Thin Films: Formation and Implications	19
Long‐Term Marine‐Induced Aging Mechanisms in FDM‐Printed PC, ABS and HIPS: Molecular and Microstructural Evolution	19
Quantification of Airborne Concentrations of Nanoscale Dusts by Particle Gravimetry Using Ionic‐Liquid Modified Polymeric Electrospun Fibers	19
The Longitudinal and Transverse Piezoelectric Effects of the Ferroelectric Polymer P(VDF‐TrFE)	18
Pressurized Gyration: Fundamentals, Advancements, and Future	18
Lauric Acid Based Composite Phase Change Materials Form‐Stabilized with Highly Crosslinked Polymer for Thermal Energy Storage	18
In Situ Generation of Poly(3,4‐ethylenedioxythiophene)/Ag₂SeO₃ Nanohybrids at Hexane/Water Interface for Photodegradation of Organic Dyes	18
Polyamide12‐Meta‐Composites with Excellent Mechanical Performance, Shape‐Memory, Flame Retardancy and 3D/4D Printability	18
Mechanical and Thermal Properties of 3D‐Printed Biocomposites of Polylactic Acid and Thermally Modified Wood Flour with Silver Nanoparticles	18
Biomedical Applications of 3D‐Printed Polyamide: A Systematic Review	17
Surface Modification of Polydimethylsiloxane via Combined Aminolysis and Alcoholysis Generating Cell Adhesive and Antifouling Properties	17
Patterning of RAFT Polymer Networks by Laser Deactivation	17
A Biofunctional Hydrogel/Nanofiber Bilayer Scaffold Delivering EGF and TGFβ3 for Advanced Nasal Tissue Reconstruction	17
Controllable Synthesis of Submicrometer Core–Shell Modifier and Its Effect on Toughening Polypheylene Ether/Polystyrene Blends	17
High Strength, Healable, Recyclable Ionogel Capable of Long‐term Load Cycling	17
Nanofibrous Biomaterial Containing Raw‐Propolis Particles Encapsulated by PLA/PBS for Wound Dressing Application	17
Poly(Butylene Adipate‐Co‐Terephthalate)/Silane‐Treated Wollastonite‐Based Blown Film for Sustainable Packaging Application: Studying the Impact of Uniaxial Stretching on the Final Properties	17
Polysaccharide‐Based Food Packaging Materials: Structural Engineering, Functional Modifications, and Sustainable Applications	17
Investigation of the Reaction Kinetics of Poly(butylene terephthalate) and Epoxide Chain Extender	17
Issue Information: Macromol. Mater. Eng. 3/2026	16
Engineering a Lung‐Derived Extracellular Matrix‐GelMA Hydrogel to Elucidate Alterations in Lung Tumor‐Stroma‐On‐Chip	16
Cellulose From Aloe Vera Plant Waste as Crosslinker for Vat 3D Printable Vitrimers: Toward a Circular Economy Approach in Additive Manufacturing	16
Prediction of Morphology Distribution within Injection Molded Parts Obtained with Fast Cavity Heating Cycles: Effect of Packing Pressure	16
Mesoporous Natural Fiber Welded Cellulose Containing Silver Nanoparticles as a Recyclable Heterogeneous Catalyst	16
Observation of Peek Melting Peaks within the Additive Manufacturing Material Extrusion Process in Relation to Isothermal and Non‐Isothermal Processes	16
Recycling of Epoxy Resin via Blending with Polycaprolactone for Fused Filament Fabrication 3D Printing Applications	16
Strong Tough Poly Acrylic‐co‐acrylamide Hydrogels via a Synergistic Effect of Fiber and Metal‐Ligand Bonds as Flexible Strain Sensors	16
Comparative Evaluation of Neural Networks and Transfer Learning for Predicting Mechanical Properties of 3D‐Printed Bone Scaffolds	16
ZnO/Cassava Starch‐Based Hydrogel Composite for Effective Treatment of Dye‐Contaminated Wastewater	16
Morphology and Structure of PEDOT:Nafion: Insights from Experiment and Molecular Dynamics Simulations	16
Effect of Fluorine and Copper Ions on Liquid‐Solid Triboelectric Nanogenerator	16
Intrinsically Flame‐Retardant Polyamide 6 by Anionic Ring‐Opening Copolymerization with a Phosphorous‐Containing Comonomer	16
Silica Nanofibers with Enhanced Wettability and Mechanical Strength for Bone Tissue Engineering: Electrospinning without Polymer Carrier and Subsequent Heat Treatment	15
Side Illumination Behavior and Mechanical Properties of Twisted End‐Emitting Polymer Optical Fiber Bundles	15
Electrospun Nanofiber Platforms for Photodynamic Therapy: Role and Efficacy in Cancer, Antimicrobial, and Wound Healing Applications	15
Thiol‐Ene Photo Crosslinked PUA‐PUMA‐Based Flexible Gel Polymer Electrolyte for Lithium‐Ion Batteries	15
Review on Polymer Materials for Solid Desiccant Cooling System	15
Cooperative Gelation of Syndiotactic Polystyrene and Low Molecular Weight PEGDME	15
Esters of Cinnamic Acid as Green Plasticizers for Polylactide Formulations with Improved Ductility	14
A New Era of Modeling MOF‐Based Membranes: Cooperation of Theory and Data Science	14
Fused Deposition Modeling of Polyolefins: Challenges and Opportunities	14
An Investigation into the Applicability of Wideline NMR for the Determination of Oil in Waxes	14
Post‐Additional Proteins into Rubber Matrices Behave as Filler to Reinforce Rubber	14
Direct Lithography for Regulating Multiple Properties of Organic Semiconductors via Photo‐Crosslinkers	14
Detailed Compositional and Structure–Property Analysis of Ethylene Oxide‐Propylene Oxide Triblock Copolymers	14
Redispersible Polymer Powders with High Bio‐Based Content from Core–Shell Nanoparticles	13
Plasma Immersion Ion Implantation Increases Adhesive Bond Strength of PEK and PEEK to Dental Composites and Enables Hydrolysis Resistance	13
Masthead: Macromol. Mater. Eng. 11/2023	13
Preparation of Shell/Core Atypical Spiral Conductive Microfibers and Composite Membrane with Good Conductivity and Mechanical Properties	13
Ion Track Formation and Nanopore Etching in Polyimide: Possibilities in the MeV Ion Energy Regime	13
Bio‐Macromolecular Surface Coatings for Autohesive, Transparent, Elastomeric Foils	13
Anisotropic Lattice Thermal Conductivity in Highly Ordered PEDOT Fibers	13
Retraction: A Photoclick Thiol‐Ene Collagen‐Based Hydrogel Platform for Skeletal Muscle Tissue Engineering	13
¹⁹F NMR Relaxometry and Diffusometry for Measuring Cargo Molecule Dynamics in GelMA Hydrogels	13
Regenerative Polyphenolic Free‐Standing Conductive Film	13
3D Inkjet Printing of Biomaterials with Solvent‐Free, Thiol‐Yne‐Based Photocurable Inks	13
Recycled PET Packaging Materials of Improved Toughness— Importance of Devitrification of the Rigid Amorphous Fraction	13

Nanofiber‐Coated CF/PEEK Composite: Boosting Osteogenesis for Enhanced Bone Grafting	13
Comparative Framework for Energy Absorption Capacity of Auxetics and Open‐Cell Foams	13
Masthead: Macromol. Mater. Eng. 9/2024	13
Effect of Cowpea Lignocellulosic Fibers as a Low‐Value Reinforcing Filler on the Properties of Poly(butylene succinate‐co‐adipate) Bio‐Composite Foams	13
Microwave‐Assisted Synthesis of Chitosan–Iron Oxide (CS@Fe ₃ O ₄ ) Nanocomposite for Removal of Ca	13
Biomedical Efficacy of Garlic‐Extract‐Loaded Core‐Sheath Plasters for Natural Antimicrobial Wound Care	13
Durable Biofouling‐Resistant Coated Fabric Based on Aerogel/Polyurethane for Marine Applications	13
Design Principles and Mechanics: A Review of Emerging Paradigms in Intervertebral Disc Regeneration and Replacement	12
In Situ Gels for Nasal Delivery: Formulation, Characterization and Applications	12
	12
	12
Synergistic Compatibilization of LDPE/PS/PA6 Ternary Blends by Combining Reactive and Non‐Reactive Compatibilizers	12
Challenges in Processing Plant Proteins Using Electrospinning	12
High‐Performance Vitrimeric Benzoxazines for Sustainable Advanced Materials: Design, Synthesis, and Applications	12
	12
CTAB‐Engineered Electro‐Blown PVDF Nanofibrous Air Filters with Enhanced Charge Retention, Filtration Efficiency, and Antibacterial Functionality	12
Kevlar/Basalt and Kevlar/Glass Intra‐Ply Reinforced Hybrid Composites: Influence of Basket Weave Fabric Structure on Thermal Properties, Flammability, and Impact Performance	12
Sustainable Cellulose‐Based Coatings and Their Impact on Mechanical and Barrier Properties of Paper	12
Controlled Crosslinking of TPU: A Case Study	12
Highly Reliable Sensitive Capacitive Tactile Sensor with Spontaneous Micron‐Pyramid Structures for Electronic Skins	12
Post‐Consumer Mechanical Recycling of Thermally Degraded Glass‐Fiber Reinforced Polyamide 6,6 for Electrical Applications	12
Hard Coatings from Soft Latexes: A Review of Routes to Overcome the Film Formation Dilemma	11
	11
Structural and Optical Anomalies in Thin Films Grown in a Magnetic Field by Electron‐Assisted Vacuum Deposition of PTFE	11
Understanding Photomechanical Behavior of Liquid Crystalline‐Based Actuators	11
Investigation of the Dielectric and Electrical Properties of Poly(chloro‐p‐xylylene) (Parylene‐C) Layers for Controlling Charge Transport in Organic Field‐Effect Transistors	11
Preparation and Properties of Novel Mucilage Composite Films Reinforced with Polydimethylsiloxane	11
	11
MoS₂‐Polyaniline Based Flexible Electrochemical Biosensor: Toward pH Monitoring in Human Sweat	11
Mesenchymal Stem Cell‐Engrafted Bacterial Cellulose and Graphene Oxide Scaffolds Enhance Peripheral Nerve Repair in a Rat Model	11
Masthead: Macromol. Mater. Eng. 4/2024	11
Mycelium Agrowaste‐Bound Biocomposites as Thermal and Acoustic Insulation Materials in Building Construction	11
Cost‐Efficient Detection of Plastics From Post‐Consumer Packaging Waste Using Selected Bands in the Near‐infrared Spectrum	11
	11
Exploring Cross‐Link Density and Additive Effects on Mechanical and Morphological Behaviors of Cross‐Linked Polymers	11
Fabricating Biodegradable Tissue Scaffolds Through a New Aggregation Triggered Physical Cross‐Linking Strategy of Hydrophilic and Hydrophobic Polymers	11
Constructing the Relationship Between Microstructure and Properties of Perfluorosulfonic Acid Ionic Membranes	11
In Situ Incorporation of Liquid Polysulfide Oligomer Modified MoS₂ into Polysulfide Rubber (PSR) as Solid Crosslinker with Greatly Improved Dispersion Ability and Interfacial Interaction	11
3D Printable Self‐Sensing Magnetorheological Elastomer	11
Thiol‐X Chemistry: A Skeleton Key Unlocking Advanced Polymers in Additive Manufacturing	10
Masthead: Macromol. Mater. Eng. 7/2023	10
Metal Ionic Liquids (MILs) as Promising Catalytic Curing Agents of Epoxy Prepolymer for the Design of High‐Performance Networks	10
Facile Preparation and Improved Electrochemical Performance of Oxygen‐Enriched Porous Carbon Materials Based on Diacetal‐Containing Polybenzoxazine	10
Radiation Grafting of Two PEG Derivatives onto PET: A Comparative Study for Biomedical Applications	10
	10
High Dielectric Breakdown Strength Nanoplatelet‐Based Multilayer Thin Films	10
Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next‐Generation 3D Printable Thermoplastics and Composites	10
Two‐Step Polyelectrolyte Complex Coating for Flame Retardant Flax	10
Glucose‐Responsive Modified Poly(Propylene Imine) Dendrimer for Self‐Regulated Insulin Delivery	10
Green Synthesis of Poly( ε ‐caprolactone) Using Environmentally Benign Organic Acid Catalysts: A Sustainable, Metal‐Free, and Solvent‐Free Route to Ring‐	10
	10
Adhesive Properties of Eco‐Friendly Hot Melt Adhesive Based on Poly(butylene adipate‐co‐terephthalate) and Rosin Maleic Resin	10
	10
Lightweight and High Impact Polypropylene Foam Fabricated via Ultra‐Low Gas Pressure Injection Molding	10
Large‐Scale Fabrication of Flexible EVA/EG@PW Phase Change Composites with High Thermal Conductivity for Thermal Management	10
	10
Analysis of Crystallization Kinetics of PLA Filament for Fused Filament Fabrication	10
Viscoelastic Properties of Electrospray‐Deposited Polymer Shells via Quartz Crystal Microbalance With Dissipation (QCM‐D)	10
	9
Enhanced Anticorrosion and Antifouling Properties of Lubricant‐Infused Pyramidal Polydimethylsiloxane Coating	9
Formation of Supramolecular Gels from Host–Guest Interactions between PEGylated Chitosan andα‐Cyclodextrin	9
Bioelectronic Hydrogels: Exemplifying the Synergy Between Biopolymers and Conjugated Polymers	9
High Power Sunlight‐Simulated UV‐Induced Radical Polymerization: Self‐Initiation and Self‐Crosslinking	9
Effect of Martensitic Transformation of NiTi Particles on Temperature Sensitivity of Flexible VGCF/PDMS Films	9
Colorimetric Detection of Nickel Ions Using Bacterial Nanocellulose Paper‐Based Strips	9
Sustainable Shell Formulations as Alternative to the Conventional Soft Gelatin Capsules in Pharmaceutical and Nutraceutical Applications. A Review.	9
Low‐Cost Lightweight Quartz Fiber‐Reinforced Hybrid Aerogel Nanocomposite for High‐Temperature Oxidation Thermal Protection	9
CO ₂ ‐Responsive Copolymers for Membrane Applications, Synthesis, and Performance Evaluation	9
	9
Degradation of Perfluorinated Sulfonic Acid Polymers Under X‐Ray Photoelectron Spectroscopy Exposure	9
Issue Information: Macromol. Mater. Eng. 4/2026	9
Speckle Pattern Analysis of PVK:rGO Composite Based Memristor Device	9
In Situ Synthesized Glycerol‐Releasing Nanocarriers Unlock Superlubricity in Oil‐Based Lubricants	9
In Situ Growth of Cyclodextrin‐Based Metal Organic Framework Air Filters for Reusable SO₂ Adsorbent Applications	9
Development of CO₂‐Philic Blended Membranes Using PIM–PI and PIM–PEG/PPG	9
Tribological Performance of Bamboo Fabric Reinforced Epoxy Composites	9
Synthesis of a DOPO Derivative to Improve the Fire Safety and Mechanical Performance of Epoxy Resin	9
	9
Additive Manufacturing‐Enabled Architected Nanocomposite Lattices Coated with Plasmonic Nanoparticles for Water Pollutants Detection	9
Reprocessable and Repairable Bio‐Based Vitrimers From Acrylated Epoxidized Rapeseed Oil for Additive Manufacturing	9
Strategies to Improve the Water Resistance of Nanofibers Obtained by Suspension Electrospinning	9
Investigation of Release Kinetics of DOX from Polydopamine Nanocapsules Prepared by Hard Template Method	9
High Power Sunlight‐Simulated UV‐Induced Radical Polymerization: Self‐Initiation and Self‐Crosslinking	9
Issue Information: Macromol. Mater. Eng. 11/2025	9
Synergistic Blend Spinning of Bioactive Lyocell Fibers for Antibacterial and Anti‐Inflammatory Skin Protection	9
Biobased Hyperbranched Polyesters as Effective Non‐Leachable UV Blockers for Sunscreens	9
Cerium Oxide Decorated Graphene Nanolayers Filled Polyvinylidene Fluoride Nanofibers as Optical Piezoelectric Sensors	9
Biotin‐Functionalized Block Catiomers as an Active Targeting Approach in Gene Delivery	9
RETRACTION: Optimizing Electron‐Beam Photothermal Pyrolysis Parameters for Enhanced Molecular Biodegradability of Polyvinyl Chloride Plastics	8
Polyampholyte Polymers‐Based Sensors: A Review on Stimuli and Applications	8
Study of Electrospun PVDF/GO Nanofibers as a Conductive Piezoelectric Heart Patch for Potential Support of Myocardial Regeneration	8
Novel Polycaprolactone‐Chitosan Hybrid Scaffold: A Double‐Sided Hernia Mesh for Regeneration of Abdominal Wall Defects with Minimized Adverse Adhesions	8
Issue Information: Macromol. Mater. Eng. 4/2025	8
Synthesis of Block Copolymers Utilizing Alkoxycarbonylation or Aminocarbonylation of Growing Chain End in Pd‐Catalyzed Living Polymerization of Olefins	8
Masthead: Macromol. Mater. Eng. 4/2023	8