Journal of Solid State Electrochemistry

Article	Citations
Investigations on Na-ion conducting electrolyte based on sodium alginate biopolymer for all-solid-state sodium-ion batteries	40
Enhanced the performance of zinc strontium sulfide-based supercapattery device with the polyaniline doped activated carbon	37
Electrochemical behavior and compressive strength of Al-Cu/xCu composites in NaCl solution	33
Research progress of nano-silicon-based materials and silicon-carbon composite anode materials for lithium-ion batteries	31
Photoelectrochemical oxidation of glycerol on hematite: thermal effects, in situ FTIR and long-term HPLC product analysis	30
Cathode materials for lithium-sulfur battery: a review	29
Electrochemical performance of spindle-like Fe2Co-MOF and derived magnetic yolk-shell CoFe2O4 microspheres for supercapacitor applications	28
Dual solid electrolytes for aluminium-air batteries based on polyvinyl alcohol acidic membranes and neutral hydrogels	27
Structural, thermal, and ion dynamics studies of PVA-CS-NaI-based biopolymer electrolyte films	26
Chitin and chitin-cellulose composite hydrogels prepared by ionic liquid-based process as the novel electrolytes for electrochemical capacitors	26
A review on TiO2 nanotubes: synthesis strategies, modifications, and applications	24
Preparation and research of high-performance LaFeO3/RGO supercapacitor	24
Synthesis of 1D β-MnO2 for high-performance supercapacitor application	24
Development of paper devices with conductive inks for sulfanilamide electrochemical determination in milk, synthetic urine, and environmental and pharmaceutical samples	23
Graphene-based nanocomposites as sensing elements for the electrochemical detection of pesticides: a review	23
Hydrothermally synthesized highly efficient binary silver strontium sulfide (AgSrS) for high-performance supercapattery applications	22
Stainless steel supported NiS/CeS nanocomposite for significantly enhanced oxygen evolution reaction in alkaline media	22
Promoting grain growth in Ni-rich single-crystal cathodes for high-performance lithium-ion batteries through Ce doping	22
Recent development in the field of ceramics solid-state electrolytes: I—oxide ceramic solid-state electrolytes	22
Novel lanthanum sulfide–decorated zirconia nanohybrid for enhanced electrochemical oxygen evolution reaction	21
Comparative study of nucleation and growth mechanism of cobalt electrodeposited on ITO substrate in nitrate and chloride electrolytes	20
Influences of direction and magnitude of Mg2+ doping concentration gradient on the performance of full concentration gradient cathode material	19
Recent advances in flexible supercapacitors	19
Modeling of Al12N12, Mg12O12, Ca12O12, and C23N nanostructured as potential anode materials for sodium-ion battery	18
Investigation of self-discharge properties and a new concept of open-circuit voltage drop rate in lithium-ion batteries	18

Electrochemical study on nickel aluminum layered double hydroxides as high-performance electrode material for lithium-ion batteries based on sodium alginate binder	18
Novel photosensitizer for dye-sensitized solar cell based on ionic liquid–doped blend polymer electrolyte	17
Ball-milling fabrication of PPy/Ni2P/GO composites for high-performance supercapacitor electrodes	17
CuWO4|MnWO4 heterojunction thin film with improved photoelectrochemical and photocatalytic properties using simulated solar irradiation	17
Exsolved metallic iron nanoparticles in perovskite cathode to enhance CO2 electrolysis	17
Interfacial kinetics and low-temperature behavior of spheroidized natural graphite particles as anode for Li-ion batteries	17
Preparation and characterization of γ-In2Se3 thin-film photoanodes for photoelectrochemical water splitting	17
Electrodeposition of Ni–Fe alloy from a choline chloride-containing ionic liquid	16
Electrodeposition of Ni nanoparticles from deep eutectic solvent and aqueous solution promoting high stability electrocatalyst for hydrogen and oxygen evolution reactions	16
ITO electrode modified with Pt nanodendrites-decorated ZnO nanorods for enzymatic glucose sensor	16
Electrodeposition, formation mechanism, and electrocatalytic performance of Co-Ni-P ternary catalysts coated on carbon fiber paper	16
The effect of synthesis and zirconium doping on the performance of nickel-rich NCM622 cathode materials for Li-ion batteries	16
Transport and mechanical behavior in PEO-LLZO composite electrolytes	16
Fabrication and characterization of Ag- and Cu-doped TiO2 nanotubes (NTs) by in situ anodization method as an efficient photocatalyst	15
Recent progress in electron transport bilayer for efficient and low-cost perovskite solar cells: a review	15
Polyaniline-MXene-coated carbon cloth as an anode for microbial fuel cells	15
Three-dimensional microstructural characterization of solid oxide electrolysis cell with Ce0.8Gd0.2O2-infiltrated Ni/YSZ electrode using focused ion beam-scanning electron microscopy	15
Recent advances in solid-state beyond lithium batteries	15
Solid polymer electrolyte based on tragacanth gum-ammonium thiocyanate	14
UV/Vis absorption spectroelectrochemistry of folic acid	14
Zn–porphyrin metal–organic framework–based photoelectrochemical enzymatic biosensor for hypoxanthine	14
Fabrication of new nanocomposites based on NiO-MWCNT-sodium dodecyl sulfate in the presence of Gundelia tournefortii extract: application for methanol electrooxidation in alkaline solution	14
Effects of ultrasonic field on structure evolution of Ni film electrodeposited by bubble template method for hydrogen evolution electrocatalysis	14
PVDF/PU blend membrane separator for lithium-ion batteries via non-solvent-induced phase separation (NIPS)	14
The effects of pyridine molecules structure on the defects passivation of perovskite solar cells	14
Synthesis of Mo2C/MoC/C nanocomposite for hydrogen evolution reaction	14
Application of ZIF-8 coated with titanium dioxide in cathode material of lithium-sulfur battery	14
A novel biosensor based on graphene/platinum nanoparticles/Nafion composites for determination of glucose	13
Mechanisms of electrochemical nitrogen gas reduction to ammonia under ambient conditions: a focused review	13
Spectroelectrochemical and electrochromic behavior of poly(methylene blue) and poly(thionine)-modified multi-walled carbon nanotubes	13
Facile electrodeposition of ZnO on graphitic substrate for photocatalytic application: degradation of antibiotics in a continuous stirred-tank reactor	13
High-performance graphene oxide-grafted chitosan-starch solid biopolymer electrolytes for flexible hybrid supercapacitors	13
Electrochemical and energy storage properties of layer-by-layer assembled vanadium oxide electrode-based solid-state supercapacitor in n+-SnO2:F/n-V2O5 heterostructure device form using ionic liquid g	13
Electrochromism in Hf-doped WO3	13
Geopolymer cement–modified carbon paste electrode: application to electroanalysis of traces of lead(II) ions in aqueous solution	13
Evaluation of an electrochemical sensor based on gold nanoparticles supported on carbon nanofibers for detection of tartrazine dye	13
Fabrication of paper-based analytical devices using a PLA 3D-printed stencil for electrochemical determination of chloroquine and escitalopram	13
Performance of solid-state Li-ion conducting battery using biopolymer electrolyte based on agar–agar/lithium chloride	13
Optimizing carbon coating parameters for obtaining SiO2/C anodes with improved electrochemical performance	12
High-performance three-dimensional flower-like CoS/MWCNT composite host for Li–S batteries	12
Photoelectrochemical study of the spinel CaFe2O4 nanostructure: application to Basic Blue 41 oxidation under solar light	12
Improved Ga-doped Li7La3Zr2O12 garnet-type solid electrolytes for solid-state Li-ion batteries	12
Sol–gel-assisted synthesis of PVPO-TiO2 nanocomposites extended to bifunctionality as efficient electrode for enzymeless D-( +)-glucose sensing and antimicrobial potential	12
Structure and electrochemical performance of LiFePO4 cathode materials modified with carbon coating and metal doping	12
Facile synthesis of Mn-Ni bimetal organic framework decorated with amine as an electrode for a high-performance supercapacitor	12
Solution-processed electrochemical synthesis of ZnFe2O4 photoanode for photoelectrochemical water splitting	12
Pomelo peel-derived porous carbon as excellent LiPS anchor in lithium-sulfur batteries	12
Consecutive metal oxides with self-supported nanoarchitecture achieves highly stable and enhanced photoelectrocatalytic oxidation for water purification	12
Improved electrochemical performance of mesoporous carbon via N/S doping	11
Preparation and characterization of graphene nanosheets dispersed pyrrole-chorobenzaldehyde-heptaldehyde conjugated terpolymer nanocomposites for DNA detection	11

A dual-mode biosensor for salivary cortisol with antibody-aptamer sandwich pattern and enzyme catalytic amplification	11
Electrodeposition of Sn powders with pyramid chain and dendrite structures in deep eutectic solvent: roles of current density and SnCl2 concentration	11
Label-free PSA electrochemical determination by seed-mediated electrochemically-deposited gold nanoparticles on an FTO electrode	11
Development of an impedimetric sensor based on carbon dots and chitosan nanocomposite modified electrode for Cu(II) detection in water	11
The mechanical hybrid of V2O5 microspheres/graphene as an excellent cathode for lithium-ion batteries	11
Inherent electrochemical activity of TiO2 (anatase, rutile) enhances the charge capacity of cathodes of lithium-sulfur batteries	11
3D highly porous microspherical morphology of NiO nanoparticles for supercapacitor application	11
Layered double hydroxides used as the sulfur hosts for lithium-sulfur batteries and the influence of metal composition on their performance	11
Pyrochlore phase (Y,Dy,Ce,Nd,La)2Sn2O7 as a superb anode material for lithium-ion batteries	11
Efficient electrosorption of uranium(VI) by B, N, and P co-doped porous carbon materials containing phosphate functional groups	11
Nitrogen-doped microporous carbon with narrow pore size distribution as sulfur host to encapsulate small sulfur molecules for highly stable lithium-sulfur batteries	11
Electrochemical and electrophoretic coatings of medical implants by nanomaterials	11
Design of a new biosensor platform for creatinine determination	11
Salt spray corrosion behavior and pitting resistance of Ti-15 V-3Cr-3Al-3Sn alloy evaluated using XPS, SKPFM, and electrochemical technique	11
The challenges and perspectives of developing solid-state electrolytes for rechargeable multivalent battery	11
Chloride solid-state electrolytes for all-solid-state lithium batteries	11
Thermal safety and performances analysis of gel polymer electrolytes synthesized by in situ polymerization for Li-ion battery	11
N, S-codoped porous carbon as metal-free electrocatalyst for oxygen reduction reaction	11
Sonocatalytic degradation of methylene blue using spindle shaped cerium oxide nanoparticles	11
Enhanced corrosion and wear resistance of Zn–Ni/Cu–Al2O3 composite coating prepared by cold spray	11
Electrodeposition of polypyrrole for high-performance zinc ion battery	10
Pt-Ni alloy catalyst supported on carbon aerogel via one-step method for oxygen reduction reaction	10
Effect of Cr(III) passivation layer on surface modifications of zinc-nickel coatings in chloride solutions	10
Pitting and crevice corrosion evolution characteristics of 2205 duplex stainless steel in hot concentrated seawater	10
Enhanced CO2 electrolysis at metal–oxide interfaces	10
Formation of lithiated gold and its use for the preparation of reference electrodes — an EQCM study	10
Heat treatment effects in oxygen-doped β-Li3PS4 solid electrolyte prepared by wet chemistry method	10
Electrochemistry in organics: a powerful tool for “green” synthesis	10
Researches on a conductive polyaniline-acetylene black composite to suppress the hydrogen evolution reaction in lead-acid batteries	10
Fabrication of high-performance silicon anode materials for lithium-ion batteries by the impurity compensation doping method	10
Corrosion analysis of graphite sinter as bipolar plates in the low-temperature PEM fuel cell simulated environments	10
Advanced separator engineering strategies for reversible electrochemical zinc storage	10
Application of the Kramers–Kronig relationships in the electrochemical impedance models fit	10
Lanthanum sulfide-manganese sulfide/graphene oxide (La2S3-MnS/GO) composite thin film as an electrocatalyst for oxygen evolution reactions	10
Spinel structure of activated carbon supported MFe2O4 composites as an economic and efficient electrocatalyst for oxygen reduction reaction in neutral media	10
In situ growth of Co nanoparticles in Ketjen Black for enhanced electrochemical performances of lithium-sulfur battery cathode	10
Sulfur-doped carbon coating on K2Ti6O13 nanowires as anode of sodium ion batteries	10
Electrochemical sensor for uranium monitoring in natural water based on poly Nile blue modified glassy carbon electrode	10
Particle size dependence of the electrochemical properties of SrMnO3 supercapacitor electrodes	10
SILAR synthesized nanostructured ytterbium sulfide thin film electrodes for symmetric supercapacitors	10
Flower-like titanium dioxide as novel co-reaction accelerator for ultrasensitive “off–on” electrochemiluminescence aptasensor construction based on 2D g-C3N4 layer for thrombin detection	10
Development of electrochemical and optoelectronic performance of new 7-{[1H-indol-3-ylmethylidene]amino}-4-methyl-2H-chromen-2-one dye	10
Single-ion conducting polymer electrolyte for Li||LiNi0.6Mn0.2Co0.2O2 batteries—impact of the anodic cutoff voltage and ambient temperature	10
The synthesis of the D-A-type polymers containing benzo[1,2-b:6,5-b′]dithiophene-4,5-dione unit, their composites with carbon, and the lithium storage performances as electrode materials	10
MOF-derived ZnO/ZnFe2O4@RGO nanocomposites with high lithium storage performance	10
Investigation of high current density on zinc electrodeposition and anodic corrosion in zinc electrowinning	10
Conflicting roles of Na-doped layered cathode material LiCoO2 for Li-ion batteries	9
Lithium storage performance of Sn-MOF-derived SnO2 nanospheres as anode material	9
Electrochemical biosensors based on divinyl sulfone conjugation of DNA to graphene oxide electrodes	9
Fast charging of alkali-ion batteries at the single-particle level: the impact of particle geometry on diffusional and kinetic bottlenecks in voltammetry	9
High-energy aqueous rechargeable batteries based on WSe2 nano-flower cathode	9
Carbon-encapsulated nanosphere-assembled MoS2 nanosheets with large interlayer distance for flexible lithium-ion batteries	9
Assessing and measuring the active site density of PGM-free ORR catalysts	9
TiO2/CeO2-CePO4-decorated enzymatic glucose biosensors operating in oxygen-restrictive environments	9
Effects of the composition of active carbon electrodes on the impedance performance of the AC/AC supercapacitors	9
Enhanced electrochemical performance of LiFePO4 of cathode materials for lithium-ion batteries synthesized by surfactant-assisted solvothermal method	9
Rational design of MoSe2-rGO-CNTs flower-like heterostructures for efficient acidic hydrogen evolution	9
Corrosion inhibition of magnesium alloy AZ31 in chloride-containing solutions by aqueous permanganate	9
Specific capacitance of CoS encapsulated g-C3N4 core shell nanocomposite as extremely efficient counter electrode in quantum dots solar cells	9
Electrochemical investigation of the anodic hydrogen evolution on MgZn2, Mg2Si, and Al4Cu2Mg8Si7 intermetallic phases	9
A portable solid-state electrochemical sensor based on N-doped graphite as a transducer layer for determination of a multiple sclerosis managing medication in biological fluids	9
Electrical conductivity and electrochemical studies of Cr-doped MoO3 nanoflakes for energy storage applications	9
Nebulizer sprayed nickel-manganese (Ni-Mn) mixed metal oxide nanocomposite coatings for high-performance electrochromic device applications	9
Research progress and prospect in element doping of lithium-rich layered oxides as cathode materials for lithium-ion batteries	9
Aqueous spray-drying synthesis of alluaudite Na2+2xFe2−x(SO4)3 sodium insertion material: studies of electrochemical activity, thermodynamic stability, and humidity-induced phase transition	9
Self-healable Nafion-poly(vinyl alcohol)/phosphotungstic acid proton exchange membrane prepared by freezing–thawing method for direct methanol fuel cell	9
Regenerative, low-cost and switchable photoelectrochemical sensor for detection of Cu2+ using MnO2-GO heterojunction	9
Bimetal cobalt-zinc MOF and its derivatives as anode materials for lithium-ion batteries	9
Electrochemical extraction of ytterbium from LiCl–KCl-YbCl3-ZnCl2 melt by forming Zn–Yb alloys	8
Effect of the macro- and microthrowing power of the electrolyte on the uniformity of distribution of electroplated copper in through-holes for PCB	8
Material and structural design of microsupercapacitors	8
Enhancement of electrochemical performance of monolayer SnS$$_2$$ for Li/Na-ion batteries through a sulphur vacancy: a DFT study	8
Electrochemical determination of acetaminophen at a carbon electrode modified in the presence of β-cyclodextrin: role of the activated glassy carbon and the electropolymerised β-cyclodextrin	8
Easy approach for decorating of poly 4-aminithiophenol with Pd nanoparticles: an efficient electrocatalyst for ethanol oxidation in alkaline media	8
Chemo-mechanical coupling phase-field modeling of lithium dendrite growth within solid electrolyte	8
Novel K+-doped Na0.6Mn0.35Fe0.35Co0.3O2 cathode materials for sodium-ion batteries: synthesis, structures, and electrochemical properties	8
The role of adding NaF to the electrolyte in constructing a stable anode/electrolyte interphase for magnesium battery applications	8
Fabrication and characterization of magnesium—ion-conducting flexible polymer electrolyte membranes based on a nanocomposite of poly(ethylene oxide) and potato starch nanocrystals	8
Effects of pressure, temperature, and plasticity on lithium dendrite growth in solid-state electrolytes	8
Consolidation of composite cathodes with NCM and sulfide solid-state electrolytes by hot pressing for all-solid-state Li metal batteries	8

An electrochemical signal switch–based (on–off) aptasensor for sensitive detection of insulin on gold-deposited screen-printed electrodes	8
Improved capacity and cycling stability of Li2FeSiO4 nanocrystalline induced by nitrogen-doped carbon coating	8
Electrodeposition of copper nanopowder with controllable morphology: influence of pH on the nucleation/growth mechanism	8
Manganese-doped zinc sulfide binary nanostructures as binder-free electrode materials for supercapattery	8
Nitrogen-sulfur co-doped FeS/C nanofibers for high-performance lithium/potassium storage	8
A functionalized renewable carbon-based surface for sensor development	8
A g-C3N4-coated paper-based separator for sodium metal batteries	8
Effect of anodic oxygen evolution on cell morphology of sulfuric acid anodic alumina films	8
Superhydrophobic surface based on micro/nano structured ZnO nanosheets for high-efficiency anticorrosion	8
Ultrathin CoNi-layered double hydroxide grown on nickel foam as high-performance current collector for lithium-sulfur batteries	8
Nitrogen doping in the surface layers of Ti3C2Tx/rGO film via nitrogen ion implantation for supercapacitor	8
Preparation of self-assembled porous flower-like nanostructured magnetite (Fe3O4) electrode material for supercapacitor application	8
Electrochemical immunosensor based on Pd@Pt/MoS2-Gr for the sensitive detection of CEA	8
Peony-shaped micron-sized NiO particles: their excellent electrochemical performances as anode materials of lithium ion batteries (LIBs)	8
Development of an ultrasensitive rGO/AuNPs/ssDNA-based electrochemical aptasensor for detection of Pb2+	7
Insights into electrochemical behavior and kinetics of NiP on PEDOT:PSS/reduced graphene oxide as high-performance electrodes for alkaline urea oxidation	7
Effect of pH on the electrodeposition nucleation and growth mechanism of cuprous oxide	7
Effects of oxygen vacancy on the electrochemical properties of γ-V2O5 as cathode material for lithium-ion batteries: a first-principle study	7
Microwave synthesis of NiSe2 nanomaterials on carbon fiber felt for flexible supercapacitors and oxygen evolution reaction	7
Dominant Li+ ion conduction in Li+/Na+ mixed crystal, 15NaI∙LiBH4	7
In situ growth of LiMn2O4 on graphene oxide for efficient lithium extraction by capacitive deionization	7
Bismuth and nitrogen co-doped graphene oxide for efficient electrochemical sensing of Pb(II) by synergistic dual-site interaction	7
Synergistic effect of nanoionic destabilization and partial dehydrogenation for enhanced ionic conductivity in MBH4-C60 (M = Li+, Na+) nanocomposites	7
Novel synthesis of nickel oxide-copper hexacyanoferrate binary hybrid nanocomposite for high-performance supercapacitor application	7
Electrochemical sensors based on antimony tin oxide-Prussian blue screen-printed electrode and PEDOT-Prussian blue for potassium ion detection	7
Electrochemical deposition of nickel targets from aqueous electrolytes for medical radioisotope production in accelerators: a review	7
First-principles study on LiMn0.5Fe0.5PO4 doping to decrease the Jahn-Teller effect	7
Synthesis and characterization of piperazine containing polyaspartimides blended polysulfone membranes for fuel cell applications	7
Physicochemical characterizations and semiconducting properties of a manganese tungstate MnWO4 obtained by hydrothermal route	7
Economical cobalt-free single-crystal LiNi0.6Mn0.4O2 cathodes for high-performance lithium-ion batteries	7
Different approaches to obtain functionalized alumina as additive in polymer electrolyte membranes	7
Electrosynthesis of nanocomposites of Ag, Au, Pd nanoparticles with aluminum(III), zinc(II), and titanium(IV) oxide-hydroxides	7
Improved lithium storage performance of sulfur loaded by CMK-3 with a tailored hierarchical pore structure	7
Sulfonated rGO from waste dry cell graphite rod and its hybrid with PANI as electrode for supercapacitor	7
Inside the failure mechanism of tin oxide as anode for sodium ion batteries	7
Phase structure and electrochemical characteristics of CaNi4.7Mn0.3 hydrogen storage alloy by mechanical alloying	7
Influence of Al3+ and PO43− co-doping on structure and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode materials	7
On how interactions influence kinetic limitations in alkali-ion batteries. Application to Li-ion intercalation into graphite through voltammetric experiments	7
The effect of bath pH on electrodeposition and corrosion properties of ternary Fe-W-Zn alloy platings	7
Effect of electropolymerization duration on the structure and performance of polypyrrole/graphene nanoplatelet counter electrode for dye-sensitized solar cells	7
Glazunov’s electrography—the first electrochemical imaging and the first solid-state electroanalysis	7
Enhanced cycle stability of Ni-rich LiNi0.83Co0.12Mn0.05O2 with Mg and La co-modification	7
Rational design of a BiFeWO6 nanostructure for supercapacitor applications	7
Thermal, electrical and electrochemical properties of ionic liquid-doped poly(ethylene oxide)–LiTDI polymer electrolytes for Li-ion batteries	7
Ceramic fuel cells using novel proton-conducting BaCe0.5Zr0.3Y0.1Yb0.05Zn0.05O3-δ electrolyte	7
Ni2+-doped ZnMn2O4 with enhanced electrochemical performance as cathode material for aqueous zinc-ion batteries	7
Surface cavity effect on C2H4 formation from electrochemical reduction of CO2 as studied using Cu2O cubes	7
Ionic conductivity and interfacial stability of Li6PS5Cl–Li6.5La3Zr1.5Ta0.5O12 composite electrolyte	7
Anion doping in LiCoO2 cathode materials for Li-ion batteries: a first-principles study	7
Zein film as a novel natural biopolymer membrane in electrochemical detections	7
WO3 coatings for photoelectrochemical synthesis of persulfate: efficiency, stability and applicability	7
Effects of four carboxyl-containing additives on imitation gold electroplating Cu-Zn-Sn alloys in an HEDP system	7
Localized corrosion of 15–5 PH and 17–4 PH stainless steel in NaCl solution	6
Theory and kinetic modeling of electrochemical cation-coupled electron transfer reactions	6
Drop-on-demand 3D-printed silicon-based anodes for lithium-ion batteries	6
Electrochemical polishing versus mechanical polishing of AISI 304: surface and electrochemical study	6
Preparation and photoelectrochemical characterization of the Ca2Co2O5, as novel photocatalyst for the H2 photo-production	6
Fabrication and characterization of graphene/sulfonated polyether sulfone octyl sulfonamide hybrid film with improved proton conductivity performance	6
Fabrication of polyaniline-supported bimetal AgNi nanoparticles and the enhanced performance towards formate oxidation	6
In situ XPS study of template-free electrodeposition of antimony nanowires from an ionic liquid	6
Green corrosion inhibitors of steel based on peptides and their constituents: a combination of experimental and computational approach	6
Fabrication of highly efficient and cost-effective dye-sensitized solar cells using ZnO/MWCNT nanocomposite as photoanode	6
Cu ion doping α-MnO2 nanowire electrocatalysts for Mg-air battery	6
Effect of temperature on mechanism and kinetics of electrochemical nucleation of copper in ChCl-based deep eutectic solvents	6
A comprehensive three-dimensional modeling of an internal reforming planar solid oxide fuel cell with different interconnect designs	6
Physical and photo-electrochemical study of β′-Mn3(PO4)2 and its application to photodegradation of methyl violet under visible irradiation	6
A strategy to avoid solid formation within the reactor during magnesium and calcium electrolytic removal from lithium-rich brines	6
Poly-5-aminoindole and graphene-like materials derived bifunctional Co–N-C electrocatalysts for oxygen reduction and hydrogen evolution	6
A bifunctional electrochemical aptasensor based on AuNPs-coated ERGO nanosheets for sensitive detection of adenosine and thrombin	6
Reducing oxy-contaminations for enhanced Li-ion conductivity of halide-based solid electrolyte in water-mediated synthesis	6
Synthesis and study of structural, optical, and electrochemical properties of iron tin oxide nanoparticles	6
Improvement of electrochemical properties of lithium-rich manganese-based cathode materials by Ta2O5	6
Electrochemical properties and extraction of Dy on liquid Sn electrode in LiCl–KCl molten salt	6
CeO2/Ce2S3 modified carbon nanotubes as efficient cathode materials for lithium-sulfur batteries	6
Crosslinked polyaniline nanorods coupled with molybdenum disulfide on functionalized carbon cloth for excellent electrochemical performance	6
Carbon nanotube-carbon black hybrid counter electrodes for dye-sensitized solar cells and the effect on charge transfer kinetics	6
Performance optimization of PGM and PGM-free catalysts in anion-exchange membrane fuel cells	6
Electrochemical detection of creatinine using Au–Ag bimetallic nanoparticles	6
Surfactant-assisted hydrothermal synthesis of CoMn2O4 nanostructures for efficient supercapacitors	6
Amino functionalized bismuth-based metal-organic frameworks and graphene aerogels for simultaneous detection of cadmium and lead ions	6
Li–S batteries: effect of uniaxial compression on the electrical conductivity and electrochemical performance of graphene aerogel cathodes	6
Ionic liquid incorporated SPEEK/Chitosan solid polymer electrolytes: ionic conductivity and dielectric study	6
MXenes in aqueous electrochemical energy systems	6
Benefits of electrochemistry studies for the majority of students who will not become electrochemists	6
Synthesis of nanozeolites type A and X from quartz-rich Cameroonian kaolin: application to the modification of carbon paste electrode for acetaminophen and epinine electrochemical sensing	6
Study on electrodeposition and corrosion resistance of Cu-Sn alloy prepared in ChCl-EG deep eutectic solvent	6
TiO2/CuInS2-sensitized structure for sensitive photoelectrochemical immunoassay of cortisol in saliva	6
Preparation and investigation of a Ni–B-assisted SnO2–Sb anode for electrooxidation of phenol	6
Preparation of MnCo2O4.5@Co(OH)2 composites on nickel foam as supercapacitor electrodes	6
Electrochemical impedance spectroscopy investigation on battery materials using a symmetrical cell	6
A novel electrochemical biosensor based on the electrospun nanofibrous nanocomposites of PCL-PPy-MWCNT towards determination of TNF-α biomarker	6
Vapor phosphorus-coated cobalt vanadate as a high-performance anode for a lithium-ion battery	6
A collection of the best practice examples of electroanalytical applications in education: from polarography to sensors	6
A simplified methodology: pH sensing using an in situ fabricated Ir electrode under neutral conditions	6
Impedimetric immunosensor based on conductive and adhesive gold/polypyrrole-dopamine nanocomposite for the detection of carcino-embryonic antigen	5