Materials Science-Medziagotyra

Article	Citations
Effect of Partial Replacement of Ground Granulated Blast Furnace Slag with Sugarcane Bagasse Ash as Source Material in the Production of Geopolymer Concrete	10
A Review of Aluminum Alloy Fabricated by Different Processes of Wire Arc Additive Manufacturing	8
Heat Behavior of Electrically Conductive Concretes with and without Rebar Reinforcement	8
Research Progress on Chemical Modification and Application of Cellulose: A Review	8
Tribo-fatigue Behavior of Austempered Ductile Iron MoNiCa as New Structural Material for Rail-wheel System	7
Performance Enhancement of Polycrystalline Silicon Solar Cell through Sputter Coated Molybdenum Disulphide Surface Films	5
Nanostructured VO2 (A) and VO2 (M) Derived from VO2 (B): Facile Preparations and Analyses of Structural, Thermal, Optical and Thermophysical Properties	5
Effects of Abrasive Particle Type, Load and Sliding Distance on Micro-Abrasion Resistance of High Speed Steel Coated with AlCrN or AlTiN	5
Effects of Nanomaterials Reinforced Aggregate on Mechanical Properties and Microstructure of Recycled Brick Aggregate Concrete	4
Green Synthesis and Characterization of Zinc Oxide Nanoparticles Using Mulberry Fruit and Their Antioxidant Activity	4
Effect of Rotational Speed, and Dwell Time on the Mechanical Properties and Microstructure of Dissimilar AA5754 and AA7075-T651 Aluminum Sheet Alloys by Friction Stir Spot Welding	4
Effect of Nano B4C on the Tribological Behaviour of Magnesium Alloy Prepared Through Powder Metallurgy	4
Effect of Fiber-matrix Interface Decohesion on the Behavior of Thermoset and Thermoplastic Composites Reinforced with Natural Fibers: A Comparative Study	3
Synthesis and Inhibitive Mechanism of a Novel Clay Hydration Inhibitor for Water-based Drilling Fluids	3
Investigation of Factors Affecting Friction Stir Welding of Polyethylene by ANOVA Analysis	3
Research Status and Prospects of Tribological Behaviors of Key Friction Pairs of Materials in Marine Equipment	2
Plasma Electrolytic Oxidation of AZ31 Mg Alloy in Bipolar Pulse Mode and Influence of Corrosion to Surface Morphology of Obtained Coatings	2
Arc Characteristics and Weld Bead Microstructure of Ti-6Al-4V Titanium Alloy in Ultra-high Frequency Pulse Gas Tungsten Arc Welding (UHFP-GTAW) Process	2
Properties of lightweight concrete blocks with waste zeolitic tuff	2
Self-cleaning and Antibacterial Properties of ZnO Nanoparticles on Cotton Fabric Treated with Maleic Acid	2
Production and Properties of Native Potato Starch-Coated Urea	2
Mechanical and Thermal Evaluation of Diatomite Doped Fly Ash Based Geopolymers	2
Influence of Laying Angles in Reinforcement of Epoxy in Sisal Plain Woven Structures	2
Evaluation of the Fire-retardancy of ULTEM 9085 Polymer Composites Processed by Fused Deposition Modelling	2
A Study of Viscoelastic Model of Polymers in Shear Flow Based on Molecular Dynamic Simulations	2

Weldability of Grade 2 Titanium Sheets with Pulsed Nd:YAG Microlaser Welding Filler and Without Filler	2
The Study of the Structural, Morphological, and Mechanical Characteristics of the Laser-Irradiated Aluminium Targets	2
Usage of Fusible Sewing Threads to Improve the Waterproof Property of Seam	2
Production and Characterization of GRC-SWCNT Composites for Shell Elements	1
Preparation of Polyimide@Polypyrrole/Palladium Hollow Composites with Applications in Catalysis	1
Ionic Conductivities of Molten Alkali Metal Chloride Binary Systems by Equilibrium Molecular Dynamics Simulation: Composition and Temperature Dependence	1
The Effect of Graphene Coating on Surface Roughness and Friction Properties of Polyester Fabrics	1
Green Synthesis and Characterization of Silver Nanoparticles Using Ginkgo Biloba Laf Extract	1
High Temperature Oxidation Behavior of New Martensitic Heat-Resistant Steel	1
Characterization of Microstructure and Mechanical Properties of Ti-6Al-4V Alloy after Cyclic Heat Treatment	1
Fabrication of Nickel Coatings on Zirconia Balls by Mechanical Ball Milling and the Process Analysis	1
Study of Mechanical Properties of Alkali Treated SZF/SF/VE Hybrid Composites under Wet Condition	1
Semiconductor Photocatalyst of Tin Oxide Quantum Dots Prepared in Aqueous Solution for Degradation of Organic Pollutants in Contaminated Water	1
Synthesis and Characterization of Na Doped ZnO Rods Grown by Simple Chemical Method	1
Preparation and Properties of Opaque Polyethylene Terephthalate/TiO2 Filaments	1
One Step Synthesis of Fluorescent Carbon Dots and its Potential Application in pH Detection, Food Additives and Free Radical Scavenging	1
Effect of Ni/MoS2 Addition on Microstructure and Properties of Supersonic Plasma-Sprayed Ni-Based Composite Coatings	1
Design of Performance Characteristics on Laser Treated Denim Fabric	1
Analysis of the Porosity and Microhardness of Glass Ionomer Cements	1
Thermal Performances and Fluidity of Biodegradable Poly(L-lactic acid) Filled with N, N'-Oxalyl Bis(piperonylic acid) Dihydrazide as a Nucleating Agent	1
Mechanical and Microstructural Properties of Copper Slag Based Blended Geopolymer Concrete	1
Synthesis and Characteristics of Microencapsulated Decanol with TiO2 Shell as Composites for Cold Energy Storage	1
Comparison of Native and Regenerated Antheraea Pernyi Silk Fibroin	1
Corrosion Behavior of Spherical Chromium Carbide Reinforced NiCrBSi Hardmetal Coatings in Sulphuric Acid Solution	1
Efficient and Color-tunable Organic Light-emitting Diodes for Rear Light Application on the Motor Vehicle	1
FTIR Analysis of Oxidized Tungsten and Tungsten Diboride Nanolayers	1
Evaluation of Moisture Sensitivity Performance of Stone Mastic Asphalt Mixes with Additional Filler: A Laboratory Comparison of Dry and Wet Mixing Methods	1
The Long-term Corrosion Behaviors of SLM 316L Stainless Steel Immersed in Artificial Saliva	1
Virtual Orthogonal Optimization in Upsetting of Cone End Billet with Large Height-To-Diameter Ratio	1
Effect of Grinding Time on the Particle Size Distribution Characteristics of Tuff Powder	1
Adsorption of Azo Dye on Magnetically Separable Fe3O4/CeO2 Nanocomposite: Kinetics, Isotherm, Mechanism	1
CaF2 Coated Li1.2Mn0.56Ni0.16Co0.08O2 Microspheres with Enhanced Electrochemical Performances as Lithium Ion Battery Cathode	1
Enhancement of the Hydrogenation and Dehydrogenation Characteristics of Mg by Adding Small Amounts of Nickel and Titanium	1
Crack Evolution and Computational Model Based Thermal Stress Evaluation of Laser Cladding Based on HVOF Sprayed WC/Co Deposits	1
A Study of Osmosis Rate Through Several Proton Conducting Polymer Composite Membranes	1
Experimental-Numerical Analysis of Woven Laminates under Tension	1
Design and Synthesis of Crystalline Carboxyl-terminated Polyester Resin	1
Influences of Waste Concrete Powder on the Strength Development and Hydration Products of Mortar Containing Fly Ash	1
High Temperature Oxidation Resistance Performance of TiC/Mo Composite by Spark Plasma Sintering	1
Corrosion Properties of Electropolished AISI 316L Austenitic Biomaterial in Relation to Electropolishing Conditions	1
Proton-conducting Organic-inorganic Sulfo-containing Membranes for Fuel Cell	1
Comparative Braking Performance Evaluation of a Commercial and Non-asbestos, Cu-free, Carbonized Friction Composites	1
The Effect of Laser Scanning Speed on Microstructure and Performance of Cr3C2-NiCr Cermet Fabricated by in-situ Laser Cladding	1
Preparation of Rare Earth Lu-doped TiO2 Film by Sol-gel Method and Its Photocatalytic Degradation of Methyl Orange Under Natural Light	1
Improving the Oxygen Barrier of Polyamide Food Packaging by Using Nanoclay	1
Influence of Biomass Combustion Products on Element Content and Thermal Stability of Latvian Sheep Breed Wool Filter Fibres	1
Study on the Biotribological Properties of Ti6Al7Nb and Ultra High Density Molecular Weight Polyethylene at Different Lubricant Temperature	1
Effect of Light-Curing Distances on the Color and Translucency of Resin Composites After Accelerated Aging	1
Role of Initial Crack Tip Shape, Plastic Compressibility and Strain Softening on Near-Tip Stress-Strain State in Fatigue Cracks during Simulation of a Finite Deformation based Elastic-Viscoplastic Con	1
Research on Electromagnetic Shielding Effectiveness of Multi-layered LZ91/Al Alloy Composite Materials by Asynchronous Accumulative Roll Bonding	1

Effect of MnO2 Dopant on Properties of Na+-β/β"-Al2O3 Solid Electrolyte Prepared by a Synthesizing-cum-sintering Process	1
Stress Field Simulation and its Experimental Verification of Carburizing-Quenching Process Performed on 18CrNiMo7-6 Steel	1
Characterization of Polymer Composites between Stereocomplex Polylactide Blends with Poly (methyl methacrylate)	1
Composite Membranes of Sulfonated Poly(ether ether ketone) with Active Carbon: Composite Preparation and Investigation of their Properties for Potential Application for CO2 Electrochemical Reduction	1
Preparation of Wool-g-Glycidyl Methacrylate with a Constructed –SH Groups/Ammonium Persulfate Redox System and Characterization	1
Investigation of Plasmonic Properties of a Rhodium Nanoshell Based Optical Nanomaterial	0
Analysis of Hard Point Mechanical Behaviour Due to Variations of Potting Agent Volume on a Composite Sandwich Panel	0
Analysis of Failure Causes of 0Cr19Ni9 Blade Crack	0
Diffusion and Thermal Shock Behaviour of Silicate Dental Ceramics	0
Hydration, Microstructure and Compressive Strength Development of Seawater-mixed Calcium Sulphoaluminate Cement-based Systems	0
Effect of Concrete Admixtures on Structural Properties and Corrosion Resistance of Steel Reinforcements	0
Investigation of Thermal and Solar Properties of Aerogel Powder Coated Textiles	0
Effects of Isocyanate-to-Polyols (NCO/OH) Ratio on Bio-based Polyurethane Film from Palm Kernel Oil based Monoester Polyols (PKO-p) for Polymer Electrolytes Application	0
Experimental Study, Characterization and Performance Test of Epoxy Cyclohexane-Based Transparent Polyurethane Material	0
Thermal Stability of Mg/TeO2 Priming Compositions	0
Photodegradation of Melamine Using Magnetic Silicon Quantum Dots	0
Characterization of Structural Stability of Magnetron Sputtered Tungsten-boron Thin Films at Elevated Temperatures	0
Evaluation of Toxicological Risks of Nail Coatings Containing Acrylate Monomer HEMA	0
Silver-containing Cation Exchange Resin: Synthesis and Application	0
Anti Crystallization Blocking of Flocking Drainage Pipe Based on Natural Phenomenon	0
Improved Heat Transfer in Guar Gel Composites Reinforced with Randomly Distributed Glass Microspheres	0
Crystallization Process, Structure and Hydrogen Absorption and Desorption Properties of MgxNi10 (x = 20.5-26.5) Alloys with Hypereutectic Composition	0
High Nanopore Volume Tetrethoxysilane Based Aerogels Prepared with Addition of N, N-Dimethylformamide at Different Stage of the Sol-Gel Process	0
Shape Memory Alloy Hybrid Composites for Improving Impact Properties	0
Wear Behavior and Microstructure of Thermally Sprayed NiCrBSiFeC and Composite NiCrBSiFeC-WC(Co) Coatings	0
β-hexanitrohexaazaisowurtzitane Particles Prepared by Spray Drying and its Characterization	0
One Step Synthesis, Characterization of Modified Montmorillonite with Hydrothermal-Assist for Triazolone Sustained Release System with pH Sensitivity	0
Cobalt Electrodeposition in Nanoporous Anodic Aluminium Oxide Films with Different Oxidation Time	0
Fabrication of the Fe/PZT Functionally Graded Material and its Application on the Thermal Match for Transducers	0
A Preliminary Study of Laser Directional Solidification for Potential Use in the Repair of Damaged Aviation Turbine Blades	0
Microwave and Induction Heating-Assisted Biosynthesis of 12CaO 7Al2O3 Electride from Aloe Vera Leaf Extract	0
The Effect of UV Exposure on the Service-life of Thermochromic Microcapsules Integrated into the Epoxy Matrix	0
Effect of Lateral Load on Local Buckling of Latex Wrapped Cold Formed Steel Columns	0
Theoretical Study of Platinum Doped Anatase (101) Surface on Detecting Decomposition Production of Polyvinyl Chloride	0
Synthesis and Characterization of Fe3O4@SiO2@mesoporous-SiO2 Materials	0
Thermal Properties and Characterization of n-Decanol-Capric Acid/Expanded Graphite/Boron Nitride for Thermal Energy Storage	0
Coating Properties of UV Curable Coatings on Natural Nails: Impact Evaluation of 5 Different Acrylate Monomers	0
Preparation and Thermal Properties of Hexadecanol-Myristic Acid Eutectics/ Activated Carbon Composites as Shape-stabilized Phase Change Materials in Thermal Energy Storage	0
Development of Transition Metal Phosphates NiCoP/NF and Evaluation of Their Hydrogen Evolution Properties	0
Experimental Determination of a Strain State in a Bulk Forming of a Low Carbon Steel	0
The Quantum Chemical Investigation on the Structure-Activity Relationship of a Schiff Base Corrosion Inhibitor	0
Effect of Gradation Variation on Mixture Properties in Stone Mastic Asphalt Mixtures with Carbon Fiber and Hybrid Aggregate	0
Effects of High Carbon Ferrochrome Additions on the Microstructure and Properties of Fe-C-Cr-Nb Hardfacing Alloys	0
Investigation of Performance Properties of Milled Carbon Fiber Reinforced Hot Mix Asphalt	0
Thermomechanical Analysis and Numerical Simulations of Fused Filament Fabricated Polylactic Acid Parts	0
Analyzing Frequency Spectra of Dielectric Loss to Clarify Influence of L,α-alanine Doping on Phase Transition in Triglycine Sulfate	0
Effect of MgO and Al2O3 on High-temperature Stability Performance of High-alumina Cement	0
Chloride Ion Penetration Resistance of Reactive Powder Concrete with Mineral Admixtures	0
DFT Based Material Computations of Metal-doped and Pure Carbon Nanodots for Examining their Enhancement of Sulfur Dioxide Adsorption	0
Influence of Relative Humidity on Electrical Properties of Textile Laminates	0
Additively Manufactured Stress-strain Dependant Frequency Reconfigurable Antenna for Pressure Sensor Applications	0
Indigenization of Buoy Components Using Additive Manufacturing Technique	0
Electrical Characteristics of Single Layer Graphene Ribbons in a Wide Temperature Range	0
Fabrication of Functional Coating Layer for Emerging Transparent Electrodes using Antimony Tin Oxide Nano-colloid	0
Experimental Investigation on Evaporator Surface Modification for Hydrophobicity and Frost Resistance	0
Effects of Sintering Temperature on Microstructural Properties of Ni1-xZnxFe2O4 Synthesized by Powder Metallurgy	0
Effects of High-Intensity Light Curing Devices and Resin Adhesive System on Repair Strength of Amalgam with Resin Composite	0
Behaviour of Innovative Concrete Sandwich Panels with Pervious Concrete Core under Flexural Bending	0
Amino-acid Based Ferroelectric Nanocomposites from Glycine Sodium Nitrate and Nanodispersed Silicon Dioxide: Preparation, Structure and Electrophysical Properties	0
Virtual Fatigue Life Prediction of Back Strip Butt Weld Joint under Bending and Torque Load Conditions	0
An Ultrasound Application for TiO2 Photocatalytic Degradation of Methyl Orange	0
The Investigation of Vortex Motion in the YBCO Devices Manufactured Utilizing a Gaussian-shaped Optical Spot from a Continuous-wave Laser	0
Synthesis and Characterization of TiC-reinforced Metallic Glass Composite Coatings	0
Study on Microstructure and Properties of Aeronautical Nickel-Based Superalloy in Laser Directional Solidification	0
Preparation of Copper Oxide/TiO2 Composite Films by Mechanical Ball Milling and Investigated Photocatalytic Activity	0
Impact of Weft Yarn Density and Core-yarn Fibre Composition on Tensile Properties, Abrasion Resistance and Air Permeability of Denim Fabrics	0
A Study of Plasmonic Properties of a Rhodium I-shaped Nanomaterial	0
Chemical Evolution of Pore Solution in Metakaolin Concrete During Water Evaporation	0
Hardness and Conductivity of Die Forged ZYK530 Magnesium Alloy	0
Blue/NIR-emitting Phosphor Based on Sr2CeO4: Tm3+, Yb3+ Obtained by Combustion Synthesis	0
Research on Magnetically Targeted Drug Delivery System Based on Fullerene Derivatives	0
Functionalization of the Fine Al2O3 Abrasive by the Polyacrylamide Deposition	0
Synthesis of Carboxymethyl Cellulose-Acrylate-OvPOSS Graft Copolymer and its Application in Paper Protection	0
Effect of Friction Pressure on Microstructure and Properties of Friction Welded Joints of Pure Aluminum/304 Stainless Steel	0
Use of Waste Phonolite as Filler Material in Flexible Asphalt Pavements	0
Synthesis of Phosphotungstic acid/S-doped g-C3N4 Photocatalyst and Its Photocatalytic Degradation of Organic Pollutants in Aqueous Solutions	0
Elastic Responses of a Composite Shell Structure Subjected to Impact Loading	0
High-temperature Oxidation Properties of TiC-reinforced Mo Matrix Composites with Cr Element Added	0
Development of the Turbulent Diffusion Model of Fine Suspended Substances in the Lower Atmosphere Layer	0
Microstructure and Mechanical Behavior of AlCoCrFeNi HEA Particles Reinforced 6063Al Alloy Matrix Composites	0

Wear Performance of Boronized Layer of Iron-based Powder Metallurgy Materials	0
Wear and Corrosion Properties of Plasma Transferred Arc Ni-based Coatings Reinforced with NbC Particles	0
Analysis of Shear Bond Strength and the Quality of the Interface Between Composite Resin and Novel Hybrid Calcium Silicate Cements	0
Synthesis and Characteristics of Microencapsulated Myristic Acid with TiO2 as Composite Thermal Energy Storage Materials	0
Luminescence of Tm3+, Yb3+ Co-doped CaLaAlO4/LaAlO3 Mixed Phase Phosphor for Solid-state Lighting Application	0
Preparation and Properties Magnetite/Polyimide Composites	0
Determination Overlapping Interface Structure in the ξ´-Al-Ni-Rh Approximant Phase	0
Effect of Self-stitched Double Fabric’s Properties on Tensile and Permeability Performances	0
Characterization of Fiber Metal Laminates for the Development of Subsea Housing	0
Impact of Annealing Temperature on Electrical Properties of Sol-gel Ba0.90Gd0.10TiO3 Thin Films	0
Investigating the Effect of Fe2O3 on Wear Behaviour and Corrosion Resistance of Electroless Ni–P Coating with Different Fe2O3 Concentrations on AISI 4140 Steel	0
Simple Ways to Obtain Activation Energy for Hydride Decomposition by Applying Data from a Volumetric Method to the Kissinger Equation	0
Electrochemical Impedance Spectroscopy Study of Porous Anodic Alumina Films Fabricated at Low Temperature	0
Strengthening Effect of Nano-materials on the Compressive Strength and Microstructure of Recycled Brick Aggregate Concrete	0
Development of Novel Wear Equation of AA7050/SiC-Steel Interface for High Temperature Application	0
Development of Removable Visual Impact Indicator or Polymer Composite Materials	0
Studies on Mechanical and Dielectric Properties of the Ni(OH)2 Filler Reinforced Polymer Composite Materials for Structural Application	0
Engineering in Oxygen-incorporated monolayer MoS2 for Effi-cient Hydrogen Evolution	0
Multi-objective Optimization of Laser Welds with Mixed WC/Co/Ni Experiments Using Simplex-centroid Design	0
The Photocatalytic Activity of the Bi2O3-B2O3-ZnO-TiO2 Glass Coating	0
Synthesis of Lauric-Myristic Acid/Activated Carbon Composite as a New Shape-Stabilized Energy Storage Material	0
Influence of Heat Input on Microstructure and Mechanical Properties of Laser Weld Metal in 2507 Duplex Stainless Steel by Different Welding Speed and Welding Power	0
Mechanical and Microstructural Characteristics of Rotary Friction Welded SS316L and Pure Copper with Added MWCNT Nano Additives	0
Grain Refining of Aluminium and 6063 Alloys Using Al-V Alloy Containing Al3V Intermetallic Compound	0
Photodegradation of Antibiotic Drugs by BiVO4 Nanocomposites	0
Seismic Performance of Cementitious Grout Filled Coupler and Sleeve Connections in Precast Wall Panels under Cyclic Lateral Loading	0
Photoluminescence and First-principle Calculations of the Single Vacancy in Diamond	0
Structures and Electronic Properties of Titanium Oxo Clusters with Tartrate Ligand: A Density Functional Theory Study	0
Influence of Cutting Parameters During Machining of Sintered Iron-Copper Parts After Impregnation with Copper-Based Material	0
Textile Sublimation Printing: GLCM Print Mottle Assessment of Black Printed Fabric	0
Thermodynamic Stability and Dissolution of Calcium Fluoride of Phosphogypsum Solidified in Cement-Based Cementing Materials in Bicarbonate Solution	0
Fabrication of High-Performance Insulated Metal Substrates Employing h-BN Mixture/Epoxy Composite Coated on Roughened Copper Plate	0
Evaluation of Corrosion Rate in X 65 Steel Pipes by Taguchi Method Based on Factors Originating from Soil and External Interactions	0
Anomalous P-E Hysteresis Loops of Ferroelectric Nanocomposites Containing Nanocellulose and Hydrogen – Bonded Ferroelectric of Triglycine Sulfate Under Influence of Composition, Temperature and Moistu	0
Photocatalytic Performance of Alkaline Activated Graphitic Carbon Nitride Under Blue LED Light	0
The Influence of Algae as a Bioactive Additive on the Properties of Suspension Fertilizers	0
Room-temperature compressive creep behavior of Ti-6Al-4V ELI alloys with basketweave microstructure under an alternating compressive stress	0
Generation of Hydrogen through the Hydrolysis of Gas Atomized High Purity Mg Powder	0
Effect of M-resin-based Stabilizer on the Performance of SBS Modified Asphalt	0
Ocean Electric Field Tests of Carbon Fiber Electrodes Prepared by Nitric Acid Oxidation	0
Effects of Milling in Hydrogen on Magnesium Hydride with a Hydride-Forming Titanium Additive	0
High-Temperature Oxidation Performance of 4Cr4Mo2NiMnSiV Hot Die Steel	0
Facile and Green Route to Silver Nanoparticles Using Aqueous Plant Extract, and their Photocatalytic and Antibacterial Studies	0
A Wavelength Tunable CW Orange-red Laser Source Based on Magnesium Oxide-doped Periodically-poled LiNbO3 in an Intracavity Sum-frequency Generation	0
Evaluation of the Antibacterial Activity Against Streptococcus mutans and Solubility of Different Dental Luting Cements In Vitro	0
New Formation Mechanisms of Pores and Cracks in Micro-arc Oxidation Coatings on 6061 Aluminum Alloy with High Temperature Oxide Prefab Film	0
Electrochemical Corrosion and Metal Ion Release Protective Efficiency of the Multilayer TaN Coatings on CoCrMo Biomedical Alloy	0
Influence of Surface Characteristics of Different Implant Abutment Materials on Growth of Porphyromonas Gingivalis	0
Design and Performance Research on Dual Layer Cement Based Absorber Reinforced with Graphene Nanosheets and Manganese-zinc Ferrite	0
Thermal Properties and Characterization of n-Decyl-Lauryl Alcohol/Expanded Graphite/Silicon Carbide Composite Phase Change Materials for Refrigerator Cold Energy Storage	0
Study on the Microstructure and Wear Behavior of In-Situ Al3Ti/Al Composites Under Induction Heating	0
Correlation Modeling Between Peening-Induced Hardness, Residual Stress and Roughness in Case-Hardened High Strength Steels	0
High Temperature Tribological Behavior of Borocarburized Layer on Q235 Steel	0
Study of Mechanical, Thermal, and Microstructural Properties of Polypropylene/Ceramic Waste Composites	0
Electro-Optical Properties of a Transmissive Diffuser based on Electrically-Tuneable Polymer-Dispersed Liquid Crystal Film	0
A Study of Recycling Process of Cobalt-based Conversion Coating Formed on Aluminium Alloys	0
Heat Treatment Effect on the Surface Properties of Carbon Cloth Electrode for Microbial Fuel Cell	0
Investigation of Ferrimagnetic Sr-hexaferrite Nanocrystals for Clinical Hyperthermia	0
Dielectric and Electrical Properties of Copper-Polyimide-Copper Structures	0
Water Safety for Human Health: Detection of Pollutants by Blue-Emission Carbon Quantum Dots via Three Modes in Different Polluted Water Bodies	0
Preparation and Properties of Masonry Mortar from Spontaneous Combustion Coal Gangue	0
Effects of Manganese on Highly Donor-Doped Barium Titanate Ceramics with Resistivity of Positive Temperature Coefficient	0
First Principles Study on the Electronic Structure and Optical Properties of La Doped YB6 Crystals	0
Effect of Bentonite Admixture Content on Effective Porosity and Hydraulic Conductivity of Clay-based Barrier Backfill Materials	0
Prediction on the Mechanical and Forming Behaviors of Ferrite-Martensite Dual Phase Steels Based on a Flow Model	0
Evaluation of Accuracy of Different Print Angulations for 3D Printed Dental Crowns	0
Use of Attapulgite as a Corrosion Inhibitor for Industrial Metals and Alloys: Case of Aluminum, Zinc and Aluzinc in a 0.5 M Hydrochloric Acid Solution	0
Study of the Red Iron Paints for Rubrics and Miniatures: Accelerated Aging and Analytical Data	0
Efficient Solution-Processed Blue and Yellow Phosphorescent Organic Light-emitting Diodes Using Binary Blend Hosts	0
Preparation and Characterization of C@Fe3O4 Supported Pd Magnetic Nanoparticles for Degradation of Dye Wastewater	0
Improvement of Microwave Dielectric Properties by Impact of Sodium Ion Doping in Complex Oxides for Polymer Composites	0
3D Cu Pyramid Array Grown on Planar Cu Foil for Stable and Dendrite-free Lithium Deposition	0
Effects of Dosing and Mechanical Activation on the Performance of Reservoir Sediment-Cement Composite Cementitious Material	0
The Influence of Directly Plating Time on the Structure of Electroless Nickel on AZ91	0
Structure and Ionic Conductivity of Ga and Nb Dual Doped LLZO Synthesized by Sol-Gel Method	0
Analysis of Friction Stir Welded Joint Properties of 2A12 Aluminum Alloy	0
Cellulose Nanofiber/Polyethylene Glycol Composite Phase Change Thermal Storage Gel Based on Solid-gel Phase Change	0
The Combustion Characteristics of Waste Liquor from Renewable Plant-Derived Chemical Polyol Processing	0
Influence of Accelerated Electron-Irradiation on Sorption Properties of Latvian Darkhead Sheep Wool Fibers	0
Industrial Process and Modern Technical Adaptations for Nylon 6 Monomer Caprolactam: A Mini Review	0
Laser Cladding of Ni-Co-W Composite Coating on Stainless Steel to Enhance Wear Resistance	0
Study on Critical Infiltration Behavior and Law of Liquid Aluminum Alloy in Carbon Fiber Preform	0
Near-infrared Spectrum Characteristics of Micro-Nano Material Based Diffraction Optical Devices	0
Synthesis and Determination of Al3+ in Chinese Herbs from Heilongjiang Province by Fluorescent Probe of Naphthalimide	0
Microstructure and Properties of 6 Series Aluminum Alloy Under Different Aging Treatment Systems	0
Nature-inspired Apatite Production: Steam Processing of Calcium Carbonate and Tricalcium Phosphate Nanosized Powder Blends	0
The Characterization of Soft Antifriction Coating on the Tin Bronze by Electro-spark Alloying	0
Surface Modified Synthetic Plastic Aggregate for Concrete – Experimental and Analytical Studies	0
Thermal and Structural Behaviour of Sandwiched Reinforced Cement Concrete Wall Panels	0
The Effect of Self-Healing Microorganism-Encapsulating Concrete on Enhancing Concrete Compressive Strength	0
An Evaluation of Phosphogypsum (PG) -Derived Nanohydroxyapatite (HAP) Synthesis Methods and Waste Management as a Phosphorus Source in the Agricultural Industry	0
Combinatorial Effects of the Recipes of the Initial Gas-atomized Powder Sizes on Microstructure and Passivation Characteristics of the SLM-ed Ti-6Al-4V Bulk Alloys	0
Rheological Properties of Hot and Warm Asphalt Binder Modified with Nanosilica	0
Preparation and Characterization of Vanillin Cross-linked Chitosan Microspheres Modified by Silver Nanoparticles	0
Change in the Microstructure of Ferritic Stainless Steel with Surface Roughness and the Number of Thermal Cycles	0