Optimization and Engineering

Papers
(The median citation count of Optimization and Engineering is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-03-01 to 2025-03-01.)
ArticleCitations
Optimizing the search directions of a mixed DDM applied on cracks26
A solution framework for the integrated periodic supply vessel planning and port scheduling in oil and gas supply logistics24
Minimizing oracle-structured composite functions23
A novel optimization perspective to the problem of designing sequences of tasks in a reinforcement learning framework20
Reliability based maintenance programming by a new index for electrical distribution system components ranking20
The intensity-based measure approach to “Weberize” L2-based methods of signal and image approximation20
A data-driven approach for mixed-case palletization with support17
Robust optimization in power systems: a tutorial overview16
An interesting project in the “strength of materials” or “machine design” courses16
Optimization methods in inverse problems and applications to science and engineering15
Bayesian optimization for the spanwise oscillation of a gliding flat plate15
Profit sharing mechanisms in multi-owned cascaded hydrosystems15
Design and validation of an MPC controller for CMG-based testbed14
A model for open-pit pushback design with operational constraints13
Optimal control of the heat equation on a fractal set12
P-graph approach for the optimisation of biomass supply network for biogas production in urban areas12
HoneyTop90: A 90-line MATLAB code for topology optimization using honeycomb tessellation11
Optimization-based dispatching policies for open-pit mining11
A biographical review of the research and impacts of Marco Duran11
Design space exploration for flexibility assessment and decision making support in integrated industrial building design11
An empirical study of derivative-free-optimization algorithms for targeted black-box attacks in deep neural networks10
Surrogate based optimization approach for the calibration of cavitation models10
The multi-class Stackelberg prediction game with least squares loss10
Gradient descent-based freeform optics design for illumination using algorithmic differentiable non-sequential ray tracing10
A gradient-based approach for optimal actuator design with morphing wings9
Optimal mitigation and control over power system dynamics for stochastic grid resilience9
Predicer: abstract stochastic optimisation model framework for multi-market operation8
A method of multiple-attribute group decision making problem for 2-dimension uncertain linguistic variables based on cloud model8
Hyperloop system optimization8
The optimization and engineering at the service of the sustainable development of energy, water and environment systems8
Coupling and selecting constraints in Bayesian optimization under uncertainties8
An adaptive direct multisearch method for black-box multi-objective optimization8
Comparative study on manifold learning approaches for parametric topology optimization problem via unsupervised deep learning8
A unified operation decision model for dry bulk shipping fleet: ship scheduling, routing, and sailing speed optimization8
Shape optimization of GHT-Bézier developable surfaces using particle swarm optimization algorithm8
Adjustable robust treatment-length optimization in radiation therapy8
Technical and economic analysis of potential steam supply from waste treatment plants to industries in Aichi Prefecture, Japan7
Iterative MILP algorithm to find alternate solutions in linear programming models7
Hermite least squares optimization: a modification of BOBYQA for optimization with limited derivative information7
Portfolio construction with Gaussian mixture returns and exponential utility via convex optimization7
Topology optimization of periodic structures for crash and static load cases using the evolutionary level set method7
Strategic capacity investment with stochastic volatility in a duopoly market7
Optimization of a SWAT model by incorporating geological information through calibration strategies7
A full-Newton step interior-point algorithm for the special weighted linear complementarity problem based on positive-asymptotic kernel function7
Improving the efficiency of reinforcement learning for a spacecraft powered descent with Q-learning7
Probabilistic constrained optimization on flow networks7
Application of decomposition techniques in a wildfire suppression optimization model7
Adjoint based aerodynamic shape optimization of a semi-submerged inlet duct and upstream inlet surface6
Current and voltage control system designs with EKF-based state-of-charge estimator for the purpose of LiFePO4 battery cell charging6
PARETO: An open-source produced water optimization framework6
SoRoTop: a hitchhiker’s guide to topology optimization MATLAB code for design-dependent pneumatic-driven soft robots6
Augmented Lagrangian cone method for multiobjective optimization problems with an application to an optimal control problem6
Deep Gaussian process for multi-objective Bayesian optimization6
Mixed-integer exponential conic optimization for reliability enhancement of power distribution systems6
An optimal solution of energy scheduling problem based on chance-constraint programming model using Interval-valued neutrosophic constraints6
Methodology and applications of robust optimization6
Energy-efficient optimization for distributed blocking hybrid flowshop scheduling: a self-regulating iterative greedy algorithm under makespan constraint5
Estimating the marginal cost to deliver to individual customers5
Preface to the Special Issue dedicated to the 6th World Congress on Global Optimization held in Metz, France,July 8-10, 20195
Topology optimization of two-dimensional magnetorheological elastomer phononic crystal plate with tunable bandgap considering a specified target frequency5
Speed limits in traffic emission models using multi-objective optimization5
A novel regularization-based optimization approach to sparse mean-reverting portfolios selection5
Announcement: Howard Rosenbrock Prize 20215
Correction to: Designing cost-efficient inspection schemes for stochastic streamflow environment using an effective Hamiltonian approach5
Novel solution strategies for multiparametric nonlinear optimization problems with convex objective function and linear constraints5
Decomposing a renewable energy design and dispatch model5
Management strategies for run-of-river hydropower plants: an optimal switching approach5
Derivative-free optimization of a rapid-cycling synchrotron5
Correction to: Tightening methods based on nontrivial bounds on bilinear terms5
Data-driven modelling based on artificial neural networks for predicting energy and effluent quality indices and wastewater treatment plant optimization4
Heat flux topology optimization treatment of vibrational damped cellular composite flexible structures4
A fast non-monotone line search for stochastic gradient descent4
Effect of inexact adjoint solutions on the discrete-adjoint approach to gradient-based optimization4
OPTE special issue on technical operations research (TOR)4
A scalable problem to benchmark robust multidisciplinary design optimization techniques4
Correction to: Announcement: Howard Rosenbrock Prize 20204
A simple projection method for solving quasimonotone variational inequality problems4
Optimization of air pollution measurements with unmanned aerial vehicle low-cost sensor based on an inductive knowledge management method4
An alternated inertial method for pseudomonotone variational inequalities in Hilbert spaces4
Rotorcraft low-noise trajectories design: black-box optimization using surrogates4
Covariance prediction via convex optimization4
Partial Lasserre relaxation for sparse Max-Cut4
Developing a Ranking Problem Library (RPLIB) from a data-oriented perspective4
Optimal design of Kirchhoff–Love plates under the low contrast assumption4
Development and analysis of a methodology to generate operational open-pit mine ramp designs automatically4
Stratification and multi-representative optimization approach to waste composition analysis4
Norm induced polyhedral uncertainty sets for robust linear optimization3
Bilevel optimization for joint scheduling of production and energy systems3
Surrogate-based branch-and-bound algorithms for simulation-based black-box optimization3
Fairness and the set of optimal rankings for the linear ordering problem3
Scalable enforcement of geometric non-interference constraints for gradient-based optimization3
Optimizing transition: investigating the influence of operational parameters on production scheduling optimization for mines transitioning from open pit to block caving methods3
A mixed-integer approximation of robust optimization problems with mixed-integer adjustments3
Topology optimization for variable stiffness design of fiber-reinforced composites with bi-modulus materials3
Optimization of Wi-Fi Direct average time to discovery: a global channel randomization approach3
Optimisation of an existing water injection network in an oilfield for multi-period development3
Event triggered distributed fixed-time optimal charging control for electric vehicle3
Robust vehicle routing under uncertainty via branch-price-and-cut3
Linewalker: line search for black box derivative-free optimization and surrogate model construction3
Matheuristics approaches for the satellite constellation design problem3
An integrated rolling horizon and adaptive-refinement approach for disjoint trajectories optimization3
A Physics informed neural network approach for solving time fractional Black-Scholes partial differential equations3
Challenges and opportunities in generation expansion for 100% renewable energy systems: an optimization approach3
Adaptive moment estimation for universal portfolio selection strategy3
SFILES 2.0: an extended text-based flowsheet representation3
Single-stage to orbit ascent trajectory optimisation with reliable evolutionary initial guess3
Cost-based optimization of steel frame member sizing and connection type using dimension increasing search3
Nonlinear relationship between household composition and electricity consumption: optimal threshold models3
A solution method for mixed-variable constrained blackbox optimization problems3
Multi-fidelity surrogate-based optimal design of road vehicle suspension systems3
Source detection on graphs3
Correction to: An efficient 146-line 3D sensitivity analysis code of stress-based topology optimization written in MATLAB3
Inversion of impact-echo data using a shape optimization approach3
Fitting Laplacian regularized stratified Gaussian models2
A wide neighborhood arc-search interior-point algorithm for convex quadratic programming with box constraints and linear constraints2
A sensitivity interpolation algorithm for the concurrent optimization of bodies sharing a common design space2
Towards efficient waste management: identification of waste flow chains in micro-regional detail through monitored data2
A preface to the special issue on optimization in space engineering2
Stochastic streamflow and dissolved silica dynamics with application to the worst-case long-run evaluation of water environment2
On quasi-inertial double extragradient-type iterations for variational inequalities and Bregman relatively asymptotically nonexpansive mapping2
Direct and inverse problems of fractional Sturm–Liouville equation2
Identifying material parameters in crystal plasticity by Bayesian optimization2
Bilevel optimal control of urban traffic-related air pollution by means of Stackelberg strategies2
Optimal placement of the multiple magnetic sources for the MHD flow in a rectangular duct2
A preface to the special issue of optimization and engineering dedicated to SDEWES 2020 conferences2
Modeling and optimization: theory and applications (MOPTA) 2019–selected works2
Probabilistic maximization of time-dependent capacities in a gas network2
An optimization model for the real-time truck dispatching problem in open-pit mining operations2
ROmodel: modeling robust optimization problems in Pyomo2
Multi-objective optimization of layout with functional constraints2
Optimal control of combined heat and power station operation2
Mixed-integer quadratic optimization for waste flow quantification2
Pyomo.GDP: an ecosystem for logic based modeling and optimization development2
A column generation algorithm for solving energy system planning problems2
Levenberg–Marquardt method and partial exact penalty parameter selection in bilevel optimization2
Network flow problem heuristic reduction using machine learning2
Multi-objective topology optimization design of thermal-mechanical coupling structure based on FPTO method2
Data-driven modelling based on artificial neural networks for predicting energy and effluent quality indices and wastewater treatment plant optimization2
Efficient MATLAB implementation of NURBS-based IGA and material design using isogeometric topology optimization2
Bandgap optimization in combinatorial graphs with tailored ground states: application in quantum annealing2
CVaR-based optimization of environmental flow via the Markov lift of a mixed moving average process2
The role of airspeed variability in fixed-time, fuel-optimal aircraft trajectory planning2
Topology optimization and geometric nonlinear modeling using positional finite elements2
OPTE special issue on PDE-constrained optimization1
MPCC strategies for nonsmooth nonlinear programs1
Designing cost-efficient inspection schemes for stochastic streamflow environment using an effective Hamiltonian approach1
A general-purpose approach to multi-agent Bayesian optimization across decomposition methods1
An efficient topology optimization algorithm for large-scale three-dimensional structures1
Mathematical model and a variable neighborhood search algorithm for mixed-model robotic two-sided assembly line balancing problems with sequence-dependent setup times1
Combined parameter and shape optimization of electric machines with isogeometric analysis1
Inexact Newton method with iterative combined approximations in the topology optimization of geometrically nonlinear elastic structures and compliant mechanisms1
Comparison of mixed-integer relaxations with linear and logarithmic partitioning schemes for quadratically constrained problems1
Selection of solar tracking system using extended TOPSIS technique with interval type-2 pythagorean fuzzy numbers1
Triggering a variety of Nash-equilibria in oligopolistic electricity markets1
Integrated optimization framework for a biomass supply network and steam Rankine cycle1
Mixed integer (non)linear approaches for the satellite constellation design problem1
Optimizing compressor rotor–stator assembly process to minimize clearance non-uniformity1
A dynamic programming based method for optimal control of a cascaded heat pump system with thermal energy storage1
Multi-objective reliability-based robust design optimization of uncertain PMS involving parametric uncertainty and correlation1
A two stage neural network for choosing optimal ejection parameters in low altitude seat ejection based on novel injury parameter1
Constraint handling techniques for metaheuristics: a state-of-the-art review and new variants1
Optimal control approaches for open pit planning1
Announcement: Howard Rosenbrock prize 20231
State of the art methods for combined water and energy systems optimisation in Kraft pulp mills1
Numerical solution for an inverse variational problem1
Efficient iterative solutions to complex-valued nonlinear least-squares problems with mixed linear and antilinear operators1
TOPress3D: 3D topology optimization with design-dependent pressure loads in MATLAB1
An augmented Lagrangian method for nonconvex composite optimization problems with nonlinear constraints1
Multi-objective aerodynamic shape design optimization of canard-controlled missiles for reducing induced roll1
A framework for balancing power grid efficiency and risk with bi-objective stochastic integer optimization1
A method of sequential log-convex programming for engineering design1
Management of a district heating network using model predictive control with and without thermal storage1
Intelligent fault diagnosis of mechanical engineering using NLF-LSTM optimized deep learning model1
Aerodynamic shape optimization of wind turbine rotor blades using the continuous adjoint method1
Robust DC optimal power flow with modeling of solar power supply uncertainty via R-vine copulas1
Simultaneous optimisation of heat and power integration of evaporation–crystallisation systems: a case study of distiller waste from Solvay process1
Sound field reconstruction using improved ℓ1-norm and the Cauchy penalty method1
Obey validity limits of data-driven models through topological data analysis and one-class classification1
Aerodynamic shape optimization at low Reynolds number using multi-level hierarchical Kriging models1
An active learning approach for multi-objective optimization and its application to the crashworthiness design of thin-walled structures1
PCM-BESO: a reformative multi-constraints topology optimization method using point cloud modeling oriented to additive manufacturing1
A disjunctive model to analyze and redefine the logistic of replenishing goods of retailing stores1
On the numerical treatment of interlaced target values: modeling, optimization and simulation of regulating valves in gas networks1
A numerical study of single source localization algorithms for phaseless inverse scattering problems1
A solution framework for the integrated periodic supply vessel planning and port scheduling in oil and gas supply logistics1
Optimal 3D printing of complex objects in a 5–axis printer1
Derivative-free mixed binary necklace optimization for cyclic-symmetry optimal design problems1
Data-driven modeling of CO2 emission-allowance compensation for wood-purchasing optimization toward carbon–neutral forest industry1
Surface facility optimization for combined shale oil and gas development strategies1
Comparison of MINLP formulations for global superstructure optimization1
A direct block scheduling model considering operational space requirement for strategic open-pit mine production planning1
Smoothing approach of lower order exact penalty function for nonlinear constrained optimization problems1
Integrated batch production planning and scheduling optimization considering processing time uncertainty1
A modular framework for distributed model predictive control of nonlinear continuous-time systems (GRAMPC-D)1
Optimization of open-pit mine design and production planning with an improved floating cone algorithm1
Portfolio construction as linearly constrained separable optimization1
Shape optimization for composite materials in linear elasticity1
Finding moving-band statistical arbitrages via convex–concave optimization1
Optimizing quantum machine learning for proactive cybersecurity1
Automatic update of Gaussian and multiquadric shape parameter for sequential metamodels based optimization1
Convex optimization over risk-neutral probabilities1
Correction: Two sufficient descent spectral conjugate gradient algorithms for unconstrained optimization with application1
Optimization of data centre waste heat integration into the low-temperature district heating networks1
Optimization over decision trees: a case study for the design of stable direct-current electricity networks1
Long-term maintenance optimization for integrated mining operations1
Moment-based distributionally robust joint chance constrained optimization for service network design under demand uncertainty1
Global solution of constrained min-max problems with inflationary differential evolution1
A novel parallel combinatorial algorithm for multiparametric programming1
Underground production scheduling with ventilation and refrigeration considerations1
Extensions to generalized disjunctive programming: hierarchical structures and first-order logic1
Discrete multi-load truss sizing optimization: model analysis and computational experiments1
Dual optimization approach to set invariance conditions for discrete-time dynamic systems1
0.045436859130859